Resume - Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre...

Misco Jobs

Resume #37041

CONTACT INFORMATION:
View contact information...

Education
* University Degree (5 years) in Chemical Engineering, University of the Studies "Federico II" of Naples – Italy (March 2003).
Thesis: "Removal of SO2 from combustion's smoke with Spray-Dryer method: effect of main operating variables on the removal efficiency (pilot plant, ENEL)", supervisors Prof. Eng. G. Volpicelli, Prof. Eng. A. Lancia, Dr. R. Nigro.
* Scientific secondary school Diploma, "A. M. De Carlo" Scientific High School of Giugliano in Campania (Na) – Italy (July 1988).

Training courses
* Master in "Management, Organization and Development of the Human Resources", Helyos Management – Italy (January 2006).
* Formation Course on Safety (D.Lgs. 626/94 e D.Lgs. 242/96), Industrialists' Union of Rome (October 2005).
* Formation Course on First Aid "I.R.C. Applicant Pioneer", Italian Red Cross (July 2005).
* Formation Course on "Energy saving and renewable sources of energy", Engineers' Professional Association of the Naples' Province - Italy (March 2005).
* Formation Courses, base and advanced, on "e-Commerce and Internet Marketing" and on "Formative Assistance for the Telematic Practice of the Enterprises' Register", OSNAP S.r.l. with the sponsorship of the Commerce' Chamber of Naples – Italy (February 2005).
* Course of Conversation English - level 5, English Intensive Language (EIL) School (ongoing).
* Participation's certificate to the Seminary "Human Resources Day", BeMore – Italy.
* Participation's certificate to the Technical Seminary on the "Opportunity to use technologies of Naturalistic Engineering for the ground defence", Geologist's Professional Association of the Campania - Italy.
Acquired experience: project procedure of Naturalistic Engineering and practical realization of a living palisade by double wall.
* Participation's certificate to the International Studying Days on the "Mitigation of the hydrogeological riskiness and environmental restoration: the approach of the traditional Engineering and of the Naturalistic Engineering", Engineers' Professional Association of the Naples' Province - Italy.
Acquired experience: knowledges of Naturalistic Engineering for the placing of the streams, for the stabilization of the hillsides and for the consolidation of the mountainsides subject to landslides and of moats.

Qualifications
* Chartered as Professional Industrial Engineer, section A (1st session 2003, no. 27/894), University of the Studies "Federico II" of Naples – Italy.
* Registered at the no. 15953, section A, all the sectors, of the Board of the Engineers' Professional Association of the Naples' Province - Italy (since 23rd March 2004).
* Registered at the no. 11096 as Engineer in the Board of the Duty Technical Consultant of the Naples' Court (since January 2005).
* Registered as Engineer to the Arbitration and Settlement's Chamber established in Engineers' Professional Association of the Rome Province - Italy (since January 2007).

ICT / Other skills
* High mastery of the use of the computer under Dos, Windows 3.x/95/98/98SE/Me/NT/2000/XP and Mac-OS, high ability to use software packages like MS Office, Autodesk AutoCad, MS Project, EP Project IMIS Kashagan Development, Macromedia Dreamweaver MX, MS FrontPage, MathSoft Mathcad, SPSS SigmaPlot, Dike, Fedra.
* High ability to program languages like Visual Basic (specialized in software for market researches), Turbobasic, Turbopascal and Fortran; high ability to modify software in Assembler language.
* High ability to use Internet (Digital signature, Web, Ftp, Video-Conference, News, Mailing, Peer-to-peer) and discreet practice in Web sites creation using HTML and ASP.
* Very high ability to solve PC software and hardware problems.
* Very high ability to assemble PC hardware and to install PC software.
* Knowledge of Commissioning Philosophy, Electrical Safety and Energy Isolation, Revamping of Turbomachines.

Professional experience
* From 29th March 2005 to now I am Project Manager of a company specialized in Pre-commissioning, Commissioning and Start-up of Oil&Gas Plants, Pipelines, Power Generation and Distribution Plants and Utilities. It also offers services like Human Resources Development, Training Centers, Process Simulation, Engineering and Maintenance (Rome, Italy).
From 08th January 2007 I am Interface Engineering Coordinator for the PMSC of the Kashagan Development Experimental Program – Onshore Plant 1st phase – North Offsites Area EPC Expansion (project value: 20 Billion USD) in Budapest (Hungary) and Almaty (Kazakhstan) for Snamprogetti Ltd c/o AgipKCO.
From 20th April 2006 to 11th October 2006 I was Proposal Manager and from 11th October 2006 to 08th January 2007 I was Project Manager for the activities of Pre-Commissioning, Commissioning, Start-up, Trial Operation, Operation and Maintenance Supervision on a exhausted lube oil – on specification gas oil conversion plant (project value: 1.5 Million Euro) in Gela for Elettra Energia S.p.A. c/o Enviroil Italia S.p.A. – Guascor Group.
From 1st September 2006 to 05th December 2006 I was HO Construction/Project Engineer for the Olokola LNG Development Project (Process Plant EPC) FEED – Nigeria (joint-venture Technip Italy S.p.A./ Snamprogetti S.p.A.) (project value: 7 Billion Euro) c/o Technip Italy S.p.A. (Dr. Ing. Roberto Barone – Technip Italy Proposal Manager, Francesco Ruscio - Snamprogetti Construction Manager).
From 29th August 2005 to 05th September 2005 I was Instructor in a "Course for Combined Cycle Power Plant Operators" in Teverola (Ce) c/o Eni Corporate University S.p.A. (final client SET S.p.A.).
Acquired experience: management of the whole project lifecycle, negotiating with users, estimating, planning and optimizing schedules then practice them in live, negotiating with customers and subs, estimating, planning and optimizing schedules then practice them in live, selling projects strategically and deliver them to the clients at a profit with advanced techniques in scope definition, project optimization and control, developing a project team and learn to diagnose & solve team problems, contract management, editing of presentations and training booklets, management and leading of technical-operating courses, editing of Proposals, Plans and Procedures, Construction Technical Proposal, Training Technical and Commercial Proposals, Construction Execution Plan, Constructability Report & Action Plan, Method Statements, etc…), engineering coordination/supervision of physical and soft interfaces, validation/resolution of Technical Queries and Concession Requests, P&IDs review/supervision, Engineering and Operation & Maintenance Documentation coordination.
* From 10th November 2003 to 06th October 2004 I was Plant Technical Manager of the IB Italian Brakes S.p.A., a company that produces composite brake blocks and pads for heavy transports (on iron and on rubber), at Via Palma no. 294 in Striano (Na) - Italy, ph. +39-081-827-7927 (Dr. Giuseppe de Martino, General Manager).
Acquired experience: commissioning supervisor during start-up activities, pre-molding and vulcanization die design and preexistent die optimization, CAD 2D/3D technical design for homologation of products, management of technical papers for manufacturing and purchasing, research and development on composite materials on polymeric array and conduction of tests on hardness and frictional factor, oleodynamic and pneumatic presses maintenance and CNC machines programming, quality control and management of the productive problems in certified ISO 9001:2000 company, "on site" products testing, "on order" production's planning and personnel management, technical contacts management of suppliers and customers, ECE/ONU Regulation no. 13 and no. 90 knowledge.
* From 05th June 2003 to 04th December 2003 I was R&D Scientific Consultant, about the activity of the National Research Project (PRIN) " Effect of the presence of natural zeolitezed materials on the activities of surface of organ-minerals aggregate of the soil", of the Department of Engineering - University of the Studies of the Sannio at Corso Garibaldi no. 107 in Benevento, Italy, ph. +39-0824-30-5872 (Prof. Eng. Francesco Pepe, University Teacher).
Acquired experience: conduction of tests in laboratory, utilization zeolitezed materials, utilization of atomic absorption spectrophotometer.
* From 01st April 2003 to 04th June 2003 I was Pre-commissioning, Commissioning & Start-up Engineer, about the research activity on "Purifying processing of combustion's smoke (pilot plant, ENEL)", of the Department of Chemical Engineering - University of the Studies "Federico II" of Naples at Piazzale Tecchio no. 80 in Naples, Italy, ph. +39-081-768-2243 (Prof. Eng. Amedeo Lancia, University Teacher).
Acquired experience: commissioning engineer managing P&ID and PFD, process commissioning and operating procedures development, start-up, maintenance and optimization of chemical plants, purifying process of polluting effluents, utilization spray-dry technology.
* From 02nd April 1999 to 31st March 2003 I was Pre-commissioning & Commissioning Supervisor, about the research activity on "Purifying processing of combustion's smoke (pilot plant, ENEL)", of the Department of Chemical Engineering - University of the Studies "Federico II" of Naples at Piazzale Tecchio no. 80 in Naples, Italy, ph. +39-081-768-2243 (Prof. Eng. Amedeo Lancia, University Teacher).
Acquired experience: commissioning supervisor managing P&ID and PFD, process commissioning and operating procedures development, start-up, maintenance and optimization of chemical plants, purifying process of polluting effluents, utilization spray-dry technology.
* From 24th July 2002 to 28th March 2005 I cooperated as EDP Manager at the Tribe Piccola S.c.r.l. at Corso Vittorio Emanuele no. 74 in Naples, Italy, ph. +39-081-669393 (Dr. Maria Vittoria Florio, Managing Director).
Acquired experience: programming and management softwares for market researches and data conversion, management contacts with foreign suppliers.
* From 23rd April 2002 to 28th March 2005 I was EDP Manager at the C.A.F.-CISAL of Villaricca (Naples, Italy) at Piazza Maione no. 2.
Acquired experience: management of fiscal softwares, compilation 730/RED/ISE models, management contacts with local Public Administration and the customers.
* From May 2001 to 31st March 2003 I was Trainer, to private people, on how to use Windows, Microsoft Word and Internet;
* From 1994 to 28th March 2005 I was ITC Consultant, installation or repair of PC software and hardware on computer systems in a lot of companies and private people;
* PC software programming (Visual Basic):
- of market researches and pivot tables creation, VOLAVIAMARE at Piazzale Stazione Marittima in Naples, Italy;
- of data format conversion, market researches, pivot tables and archives creation, Tribe Piccola S.c.r.l. at Corso Vittorio Emanuele no. 74 in Naples, Italy;
- of employees' salaries control, materials charge-discharge and customers receipts, Pipolo at Corso Europa in Villaricca (Na), Italy;
- of stock control, Centro Copie Villaricca and Mic Motors in Villaricca (Na), Italy.

Other information
* In 1986 I obtained the "A" Drive license and in 08/12/1988 I obtained the "B" Drive license.
* Since 05/31/2004 I am member of the Young Engineers Commission and since 01/26/2005 I am member of the Environment Commission of the Engineers' Professional Association of the Naples' Province - Italy.
* Since 07/12/2005 I am member of the Italian Association of Industrial Plant Engineering (ANIMP).
* In 1987 and in 1988, during secondary school studies, I was voted for students' deputy in the District Scholastic Council of the 26th Scholastic District.
* I accomplished the military service from 12/06/1994 to 11/23/1995 (12 months), rank Corporal of the helicopterists, as "Chief of the Operating room staff" in the O.A.I. section of the 55th Group Army Aviation's Squadrons "Dragone" in Padua, Italy.
During the military service I was elected for troop's deputy in the COBAR of the 55th Group Army Aviation's Squadrons "Dragone" in Padua, Italy, and in this COBAR I had the nomination as Secretary.
* Since 06/11/2004 I am Operating Ordinary Member of the "Falchi del Sud" Voluntary Service Organization, at Via S. Giacomo dei Capri no. 65 bis in Naples - Italy, as "Civil protection provisional auxiliary" and hold the position of Account's Reviser for the biennium 2005-06.
* Since 01/01/2005 I am member of the Engineers' Association, Naples – Italy.
* Hobbies:
- cuban salsa (I dance since 2005, intermediate level);
- martial arts (Judo, green belt, 1975-1980)(Karate, black belt, 1980-1986)(Tae Kwon Do, green belt, 1986-1990);
- aquariology (I proposed, and was accepted, a project for a company to produce chemical products for aquariums' water treatment, to obtain a public financing taking advantage of the Law 608/96 (art. 9 septies) pertinent the "honor loan", but I didn't take part to the obligatory courses because I preferred to obtain the university degree before);
- electronics (assembly of little equipment starting from the creation of the printed circuit board);
- aero-model making (creation of aero-models by balsa wood);
- philately and numismatics;
- financial trading (I manage a web site of financial for investments in the short term).

Total availability to travel and to relocate wherever in the world.
Predisposition to the human contacts and the team job, in mutual collaboration.

My greater aspiration is to continue to grow as culturally as professionally through the job.

I authorize the treatment of the personal data (Law 196/2003).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 496)

Go to Search Parameters...

Brief Description

Human Resources, Project Management, Training, Engineering

MSc in Management Finance,BS(Hons) in Business Administration, ACCA, CAT

Early career Supply Chain Management & Project Management Graduate

Am a hard working and reliable person who displays a high standard of care and customer service, a person who is highly active, self motivated, keen to succeed and eager to learn new skills. Am good team worker and I know how to prioritise my work.

Administration, Marketing, Business Development, Operations & Computers

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

Oil & Gas Land Title, Leasing, Right of Way, Consulting & Reporting

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Seasoned expat. Strong broad-based tech skills and extensive project O&M exp in frontier third world environments. Road const, water rehab, airports, infrastructure rehab. Extensive EPL/EPC exp as Project Eng.

Planning, Scheduling, Primavera, Risk management, Pertmaster

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

Human Resources Generalist

B2B Marketing, Product Development, Dealer Management, Market Research

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Repairs, servicing, maintenance of electronic systems

Sr. Health & Safety Engineer - OHS Procedures, Training, Inspection, Audit; HSE Plan, Objectives, Matrix etc.

I have ability on heavy duty equipments operation,fms dispatch system using high technologies,mine supervision as well.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

Workplace Safety Health Environment Coordinator - Moreton Island Oil Spill Clean Up Project

I have my fisrt degree in ghana in one of the best universities in the country as well and am currently working with one of the biggest mining company in the country too.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

5 years experience in Secretary work, Administration support and Branch manager assistant - team support to senior and management level in a multinational company

an economics graduate from olabisi onabanjo university. i also belong to a professional memeber of the institute of chartered accountant of nigeria.

Have good knowledge of the principle, practice and procedure of geology. Familiar using a personal computer with Mapinfo, Microsoft Office, Microsoft PowerPoint, and email / internet systems. Fair in English , both oral and written.

Oracle, LPN, 3PL, Supply Chain, Imports, Logistics

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Working as a Piping Supervisor in the field of Oil/Petro-Chemical industries Maintenance & Project Work.

Good Mam/ Sir My name is Denver Moodley. I am a qualified Advanced Life Support Paramedic working in Africa for International SOS remote site projects. I am keen to explore the option of Contract work with better opportunities and would be grateful if you consider my placement in one of your remot

HUMAN RESOURCES PROFESSIONAL

Currently I am completing a Diploma in Hospitality Management at Southern Alberta Institute of Technology (SAIT Polytechnic). I have 8 years of experience in the hospitality industry and within the 8 years, I have 3 years of managing experience.

Training Coordinator

My huge experience in oil& gas petrolium sector allowed me to to postule to several postes of job, have graduate from assisatnce untill attend the degre of supervisor gives me more knoweldge & ability to deal with almost offers, able to work under strong envirment and pression

Security, life support, camp management, logistics

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Accomplished, result-oriented contract expert with three years proven success in managing contract, administration and logistics; and two years experienced in project estimating. Civil Engineering graduate, ready to transfer highly versatile knowledge and skills to a career in the private sector.

Five-year experience in metallurgical projects from the Gold and Nickel industry. Two-year plant and pilot plant experience. Speak, read and write English and Chinese (Mandarin). Familiar with pressure leaching at high temperature.

Sr.Chemist / Chemist , Quality Assurance / Control , Researching and Development, Production Supervisor Or eq. Position.

I am a motivated graduate with qualifications in Geological Engineering, Applied Petroleum Geoscience and Quantity Surveying and I am proactive, confident with excellent communicative skills. I am flexible in my approach work, accurate and punctual. I am focussed and motivated with eye for details

Safety specialist, tertiary trained, extensive experience,

I am a seasoned QMS Internal & External Auditee, a trained QMS Internal Auditor and Document Controller, currently managing the implementation of ISO 9001:2008 (QMS) for a company in Nigeria. I have over five years experience in both Oil and Gas industry and Insurance Company working as document con

Strong English verbal and written communication skills • Specialized knowledge in MS Office suite- Outlook, and filling out DD Forms • Computer literacy in word processing, database maintenance, and spreadsheet software

Skills of dealing with computer programs like microsoft office programs, and internet. commuincation and team work skills, ability to work under pressure, marketing and selling skills , active commuincation skills, arabic-english typing skills, icdl certificate, english skills written and spoken

Recently graduated with a Bachelor Degree in Business Administration (5/2007). Worked at Bisco Industries as a Management Trainee/Sales, 11/2007 – 07/2009.

Professional ROW Agent and Landman

Free! Esri Software Senior Developer

I perform a variety of duties as well as working in a collaborated team player environment; 3 plus years of experience in clerical work as well as Customer Service work; Ensure that the necessary quality records are specified, generated and controlled in accordance with the appropriate procedures;

Indonesian university graduate who want to exceed carrier in Australia. 10 years working experience, and willing to work as a operator. ISO 9001:2001 qualified and also can speak Japanese fairly

Accounts Manager, MCom, CWAI

1 2 3 4 5 6 7 [ 8 ] 9 10

Seach Parameters


Change search parameters...
CATEGORIES: Administration; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out