Resume - I have 16 years work experience as Safety Director an Environmental Engineer mai...

Misco Jobs

Resume #6291

CONTACT INFORMATION:
View contact information...

WORK HISTORY

2001-To Present Safety Director/Head Environmental Engineer, Progress Coal-Massey Energy.
Responsible of all safety aspects of this complex, training,safety evaluations and regulatory compliance. Responsible for all environmental compliance of surface mine complexes. I am the liaison with environmental regulatory agencies. I do inspections for 2 MSHA impoundments, the inspection and preparation of certification for all valley fill and sediment control structures. I approve all reclamation and field work to the required permit conditions and regulations.

2000-2001 Project Manager/Forman, Hi-Tech Construction
My duties were to coordinate, organize and supervise construction crews and subcontractors to meet job and customer specifications.

1990-2000 Project Manager, Construction Safety and Environmental Compliance Engineer, Pen Coal Corporation
I assisted in the design, cost analysis, budgeting and direct supervision of construction crews for all projects related to production and non production. I assisted in the design and supervision of open pit surface mining as well as deep mine projects. I was in charge of the design and treatment of waste/water produced by all operations. I designed and implemented system to meet National Pollution Discharge Elimination System (NPDES) compliance. I was in charge of all time studies for personnel.

1988-1999 Team Instructor, Southern Coalfield Mine Rescue Association
I was employed as team captain for April 1988 until June 1994, at that point I was promoted to team instructor after receiving state certification. I was responsible for training of two, six member mine rescue teams. I developed plans and procedures for mine rescue disaster recover, as well as rescue equipment maintenance and training schedule.

1988-1990 Environmental Engineer, Island Creek Coal Company
I was employed as an environmental engineer to design and implement a water treatment and reporting system for three hundred monitoring sites, located in southern West Virginia and eastern Kentucky, to meet National Pollution Discharge Elimination System (NPDES) compliance. I was subsequently promoted to Reclamation Compliance Engineer. At that position my duties were to supervise construction of emergency spillways, decant system, erosion and sediment control for class nine, class three impoundments surface mine operations.

1987-1988 Chief Draftsman And Designer, Appalachian Surveying Inc.
I was employed as the Chief Draftsman and Designer. At this position my duties were the design and layout of surface and deep mine operation. I was the survey crew leader in charge of readout information and collection.

1985-1987 Preparation Plant Fabrication Designer/Drafting Detailer, Guyan Machinery Co.
My duties were and not limited to the collection of measurements and data fro customers facilities. I designed fabricated products that were used in the coal preparation industry. I was also instrumental in testing and evaluation of new products we designed along with time studying for effectiveness and performance.

EDUCATION

Associate Degree in Drafting and Design Engineering, West Virginia Institute of Technology, now (WVUTECH) BA, Board of regents Degree. Advanced Drafting, Logan High School.

LICENSES & CERTIFICATES

Surface Mine Forman, Mine Rescue Instructor, Mine Rescue Team Member, Surface and
Underground Miner certifications.
Federal certified, class three impoundment inspector/instructor.
Federal certified, surface and underground personnel safety retraining.
Troxler Electronic Laboratories, Nuclear testing equipment.
State certified, surface construction.
40hr HAWOPER, OSHA.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1067)

Go to Search Parameters...

Brief Description

PNG Registered Mine Manager with 11yrs + experience in hard rock mining; mine operations & planning, mine projects, mine rehab, 16mt dredging operation, manage 100kt/day crusher, manage limestone quarry, manage mine voids, have managed over 300 personnel and manage multi millionUS$ contracts.

I have more than 20 years of supervisor experience and a strong background in the mining industry, spicifilly with milling ,and extensive maintenance experience .

Chemical engineer, B.Eng (Chem), project management, production management, process engineer, consultant

My objective is to be a leader who places the safety of the worker and integrity of the company in high esteem. The value of Zero accidents and no loss time incidents affect the bottom line dramatically, in employee and company attitudes.

Working 13 yrs in quarry for producation ,maintaince and project of different type of crushing plants

Results oriented, seasoned mining professional with management experience in coal and oil sands open pit mining. United States citizen with Canadian Residency

Twenty two years experience in the Mining/Engineering field, encompassing procurement management, contracts, vendor management, projects, SAP logistics module (SAP Materials Management Super User), planning, dealing with overseas suppliers, people management, and training will make me quite suitable

I have been responsible for many types of mining equipment from underground mining equipment, trucks, loaders, and drills to some of the largest models of heavy equipment used in open pit mining. My experience has included new mine start up and implementation of a planning department

I have been working in Africa for the last 6 years on managerial level in the security industry. I have the ability and experience to work in a general management position.

MAINTENENCES MANAGEMENT OF ALL MINING EQUIPMENT

-Softwares:Drafting:ACAD2000i, VAX; Office: Word, Excel, Access, Powerpoint, Internet Explorer -Highest degree: MSCE / Mining -Experience: Engineering: open pit and under ground mining; Technology: Computer hardware and software, Management: Administration, Finance & Business Development.

I am an independent consulting Mining Engineer based in Perth, Western Australia. I specialize in temporary management replacement, mine design, and mine project evaluation in Australia, Asia, and Latin America. No job is too small and all inquiries will be responded to.

Mining Engineer with a flair for production& Marketing, Managerial background with wash plant experience

Competent Project Controls specialist with Estimating, Claims Management and Risk Management skills. Experience spans 35 years in industries including Nuclear, Fossil and Hydroelectrioc power, Oil and Gas, Refinery and LNG plants. Multi-discipline estimating skills at all levels from FEL onwards.

I have >30 years multi-commodity experience, more recently focussed in gold and uranium, from grass roots exploration thru feasibility study.

I beleive my strong college degree and work experince in mining, construction and logistics operations will be an asset for any organization.

A hard working, self motivating and a responsible individual with an out going personality. Excellent in public relations and in communication skills (Three Languages). Enjoys meeting challenges remains confident and calm under pressure & Good team player

Senior executive and experienced with an Metallurgy Engineering degree

Mining Engineer with MBA (Operations Management), FCC (Metal), Base Metal (OP & U/G) & Iron Ore Mining (OP) +22 years of Hands on Hard Rock Mining Experience in Open Pit Mining (15 yrs.) & Underground Mining (7 yrs.), Mine Operations, Short term Mine Planning, Drilling & Blasting,

I have 16 years work experience as Safety Director an Environmental Engineer maintaining compliance with all regulatory agencies , state and federal. I have 17 years experience in company management. I have various aspects of safety and public relations experience.

Business manager, Project Manager, P&L responsibility, 50-70M business, strategic planner, strong interpersonal and communication skills, innovation driver of products, customer relationshi

Experience in a range of commodity types: VHMS, intrusion-related-, meso- & epithermal-Au and porphyry Cu-Au and Mo style deposits. (Australia, Turkey, Albania, Kyrgyzstan Saudi Arabia & Oman). Reviewed, designed, budgeted & implemented regional & mine-based exploration programmes

I have a bachelor's degree in Mining Engineering and have 11 years working experience in hard rock underground and open pit mines. I also have computer skills in mine planning and have supervised operations at a high level.

Wide experience covers many aspects of shear zone hosted gold mineralisation. Also been involved with numerous platinum and base metal exploration projects. Mining experience gained on Witwatersrand and greenstone hosted gold deposits. Computer literate, managed budgets and held management position.

Goal: I am looking for an international job opportunity on Cost Management in Mineral Process Plant

Exploration Geologist with over 15 years experience and a strong desire to become part of a successful team in the mineral exploration or mining fields. Experience in all aspects of field work, and acquiring a solid knowledge base of minesite geological duties.

Executive, Senior Manager, Vice President. P eng mining and MBA. Over 13 years of experience. Restructured operations, started new mines, raised $32M, listed new company and supervised up to 100 employees. Bilingual English and French. Open to relocation and to extensive traveling.

I wish to be a member of a dynamic company that has long-term goals and continuing challenges in meeting those goals. Would like to be a part of a company that has a true philosophy of co-operative effort where difficult goals and challenges are accomplished by team effort.

Chief Consulant/Metallurgist interested in international assignments. Experience in developing countries.

Mining Engineer having six years experience in mining operations and improvement initiaves and pursuing 1 yr executive MBA in finance.

Mine superintendent. Broad management and supervisory, engineering, production, mine startup, contracting, and cross-cultural experience in the underground environment. Mine sup't. Ten-plus years experience in backfill, shotcrete. Extensive xxperience in Latin America and Kosovo.

BSc Geology Honours, Mining Geostatistics, MBA and 16 years mining industry experience

- Managing Personnel - Financial Forecasting - Financial Modeling - Financial Analysis - Financial Reporting - Budgeting - Variance Analysis - Government Reporting - Develop Standard Costs- General Ledger - A/P, A/R, Payroll - Inventory, Cash

Computer specialist with 15 years of experience in the IS field, with 3.5 years as an IS manager . Have exposure to almost all areas of IS.

Mechanical Engineer: 12 years experience in project management & administration of highly complex industrial projects. Design, estimation, planning, scheduling, inspections and expediting. Team builder with outstanding results in conflict handling, excellent overall program leadership.

Senior Executive with Board Experience

Seior EE in oil and gas field and plants, construction and consulting, power generation and distribution, switchgear and motor control centers, training and development. I hold Masters degrees, completed all phd courses at McMaster University: Hamilton, ON. Canada. Accepted as P.Eng. by PEO, Canada

Geology & Mining Engineering Degrees; Underground and Surface Experience; Professional Geologist; Qualified Person after NI 43-101; Vulcan, Minesight, Gemcom Experience

Technical mining management professional with proven success in surface mine engineering, environmental and operations searching for a position in Operations or General Management.

Safety system and Advance Safety Auditing

20 years overseas contracting, Mining and Construction

I am a Certified Safety Executive (CSE) and I’m an Associate Environmental Professional (AEP) with more than 13 plus years of experience in construction, industrial, mining, residential and service related industries

31 years experience (10 years international) in project and contract management of large scale industrial projects in the oil & gas (onshore & offshore), alumina, petroleum, brewing, iron ore, nickel, gold and general mining industries.

20+ years in Mining/Smelting/Construction Industry. Gold, Nickel, Industrial Minerals (ilmenite, garnet). Exstensive international experience for large companys. Contact Tel +47 917 09 554 email brian_ballou@yahoo.com

Worked ten years in underground coal mine for Peabody coal compny. Was certified electrician from 1974-1984. Worked as a foreman and assistant mine manager.

Free! Coal Geologist/Geotechnical Engineer

Meticulous finance professional, current Controller of Mining Operations with twenty-two continuous years of challenging professional experience in the areas of audit, banking, accounting, cost control, budget, financial management and controllership. Hands-on executive.

I have been involved in both project development and mine operations aspect of the mining project.

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Goal-oriented operations manager with extensive international experience, English/Spanish speaking from Colorado and understands South America.

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out