Resume - Currently working as a Mining Technical Services Superintendent with 10years und...

Misco Jobs

Resume #68599

CONTACT INFORMATION:
View contact information...

Profile

38 years old & result oriented professional
10 years underground mining-experience
5 major Zambian underground mining methods-experience
6 major Zambian mines-experience

Experience

Underground and surface geological mapping
Underground and surface geotechnical mapping and ground condition assessment
Siting of exploration and stope outline bore holes and logging of the of the same
Updating of the above geological data on mine sections and plans
Controllable and Uncontrollable Underground Water Dewatering
Implementation and updating of the Emergency water Control Procedures
Enforcement of observance of provisions of the mining and explosive regulations
Depletion of ore reserves and resources by stope
Reconciliation of ore tonnage and grade to mill
Enforcement of standards in CAD using MICROSTATION software. (Equivalent to Auto CAD and Pen Map)
Up casting and down casting Mine Ventilation systems
Surface and Underground Mine Survey Measures
Manual calculation and classification of ore reserves and resources
Dilution and grade control monitoring and monitoring of stope over breaking
Generation of End of Life (EOL) and 2,3 and 5 years Life of Mine (LOM) Plans
Computer generation of geological surfaces using a Gemcom software (Equivalent to Surpac and Data mine)
Knowledge in Lynx (RAMCOZ), Surpac (Mopani), Datamine (Nchanga) and Gemcom (Konkola)
Operating and Capital budgeting and Cost control using Ellipse Minicom software
Control, positioning and mining of haulages, declines and Dewatering Drain Holes
Safety, health, environmental, survey and ventilation monitoring and controls
Planning and implementation of exploration progammes.
Generation of stope histories i.e. tonnage, grade, and extraction factors per Stope/Retreat by month

Performance Recognition

2006 -7 Performance Review – April 01, 2007
Was rated ' Very Good and Almost Ready ' in the performance appraisal and SMIS assessment. I had shown initiative, and gone beyond the call of duty to fulfill my responsibilities and had needed no supervision after agreement of objectives.

Superintendent Technical Services KCM5 – December 01, 2006
Appointed on transfer from Konkola Mine at No.3 Shaft to Nampundwe Mine in Lusaka within KCM Plc.

Stars of Business (SOB) – November 01, 2006
Changed title from Business Leader Group (BLG) to Stars of Business (SOB).

Business Leader Group (BLG) – October 25, 2006.
Recognized as a peak performer with potential to provide quality leadership as a young successful manager to support the growth of KCM.

2005 - 6 Performance Review – April 01, 2006
Was rated ' Good ' in the performance appraisal and SMIS assessment and had my remunerations reviewed accordingly. I had shown the necessary initiative whilst discharging my responsibilities and had performed beyond the 'maintenance' mode.
Senior Geologist KCM5 – February 01, 2006
Appointed on promotion to Senior Geologist to manage the Konkola Mines Mineral Resource Department for daily operations and the expansion project - KDMP at No.3 Shaft.

KCM 4 Special – October 01, 2005
Recognized as a KCM4 Special in acknowledgement of the vital role I was playing as acting Senior Geologist in improving the operations in KCM at No.3 Shaft. My remunerations were reviewed accordingly.
Acting Senior Geologist KCM4– June 01, 2005
Appointed on acting to Senior Geologist to manage the Konkola Mines Mineral Resource Department for daily operations and the expansion project - KDMP at No.3 Shaft.

Production and Exploration Geologist KCM4 – June 11, 2004
Appointed as production and exploration geologist to monitor the closure of Chingola B mine at Nchanga Mines and extend the life of mine.

Senior Geologist M5– February 24, 2004
Joined Mopani Copper Mines Plc at Nkana, Central Shaft in Kitwe as a Senior Geologist in Production.

Project Geologist G1– January 01, 2003
Appointed as project geologist for Luanshya and Baluba mines at RAMCO (Z).

Sectional Geologist G1– November 03, 2000
Appointed as sectional geologist for Luanshya East Mines at No.28 Shaft at RAMCO (Z).

Trainee Geologist G1– November 28, 1998
Employed as a Trainee Geologist at RAMCO (Z)

Current Responsibilities

Nampundwe Mine - Konkola Copper Mines
Carry out all the functions of the Superintended Technical Services for the mine
Supervise, carry out and direct the activities of the Chief Surveyor, Ventilation Engineer, Senior Geologist, SHEQ Coordinator, Diamond Drilling Mine Captain, Chief Fire Officer, and Mine Training School Captain.
Lead, advise, train, develop and support subordinates
Check the following ventilation and hygiene reports:
Monthly Occupation hygiene
Monthly blasting schedule
Monthly effluent – MSD Report
Quarterly ventilation Report - MSD
Monthly Environmental Monitoring Report
Annual Ventilation Report – MSD
Generate and approve the following mineral resources reports:
Monthly geological reports
Quarterly geological reports
Annual geological reports
Check and approve the following survey reports:
Monthly survey measure
Quarterly subsidence report – MSD
Originate, prepare and evaluate the following:
Monthly and annual ore reserve depletions by stope
Monthly and annual exploration and stope drilling plans and reports

Prepare & evaluate the following:
Site, drill, and log stope and exploration holes.
Position and control underground excavations of haulages, drives and crosscuts.
Ore body Monthly evaluation and delineation.
Originate, monitor and control monthly departmental operating costs through Mincom Ellipse.
Update and increase the mineral reserve and resource base
Improve diamond drilling efficiency
Contribute to technical adjudications for various projects/contracts through the contracts technical committee.
Grade control to achieve a grade factor of 95% of the budget grade for the mine.
Dilution control to achieve a dilution factor of 20% for the mine.
Generate Monthly Ore and Grade Reconciliation to mill
Support the maintenance of BSI compliance for the following international certifications:
OHSAS – Occupation Health and Assessment Series
ISO 9001 certification in analytical services – International Safety Organization.
ISO 9001 certification in safety – International Safety Organization.
Attend the following meetings:
Annual Budget Reviews
Monthly Contracts Committee Meetings
Monthly Heads of Department Safety Review Meetings
Monthly Heads of Department Cost Review Meetings
Monthly Production Planning Meetings
Weekly Heads of Departments Production Meetings
Monthly Departmental Safety Meetings
Occasional internal environmental audit meetings
Occasional external environmental audit meetings
Occasional internal safety audit meetings
Occasional external safety audit meetings

Previous Responsibilities and Achievements

No. 3 Shaft, Konkola Copper Mines
Senior Geologist for the shaft comprising four (4) different active mining methods viz SLOS, PPCF, MOCB and Cascade.

Increased the reserves from 74,925 tons per month at 2.83%TCu to 134 062 tons at 2.88%Tcu.
Mapping and positioning the mining of major haulages, Konkola deep declines and inclines in the correct formation.
Generating, updating and implementing of long and short-term plans for exploration and evaluation diamond drilling.

Surface and Underground exploration drilling and logging for Konkola deep mining.
Monthly Evaluation of reserves for Production.
Daily monitoring of grade control samplers and production performance.
Monthly importation of boreholes and updating of geological surfaces into GEMS 5.5.
Production of weekly, monthly and quarterly geological reports.

Chingola B Portal Mine, Konkola Copper Mines
Responsible for all geological and grade control functions under room and pillar mining method and "SLC."
Monitor the closure of the Mine towards the end of its life and come up with ways of extending its life.
Increased reserves beyond the end of life from March 2005 to August 2005 at a production rate of 20,000 tons per month Initiated a project to undermine the pillars using a "sublevel caving mining method."
Directed the activities of senior geological assistants in grade control during tramming
Central Shaft – Nkana Mine, Mopani Copper Mines

Verified payment requests from AAC contractors for drilled bore holes
Sited bore holes, undertook bore hole logging, geological update of mine plans and sections and drainage monitoring
Supervised and organized Senior Grade control officers and samplers for the entire shaft

Roan Antelope Copper Mines – RAMCO (Z)
Directing the activities of geological samplers.
Underground mapping.
Postioning of haulages and drives.
Bore hole siting, drilling and logging.
Ore reserve calculation.
Underground dewatering.
Sampling and evaluation of the muliashi copper oxide ore.
Assisted coordinating the activities of auditors in the diligence studies during the sale of RAMCO (Z).

Job on Training:
Underground Geological mapping and sampling methods.
Diamond drilling and generation of geological models, plans and geological sections.
Major aspects of geotechnical mapping, support monitoring and subsidence measurements.
Layout of underground designs Viz. Survey Plans, Mine Ventilation, Development Planning and Production Stopes.
Ground water monitoring through pump figure measurements, controllable and uncontrollable water bore holes.
Calculation of ore reserve grades and tonnages.
Publications

The Geology of the Kamanikwa River area (1998)
This publication is a write - up of Geological mapping over an area of 64 square kilometers in Gwembe valley, Sinazongwe. The publication gives detailed geological information to the understanding of the regional geology of the Zambezi Rift Basin.
Nature and characteristics of the Mufulira Ore body at the fringes (1998)
This publication was written following a detailed underground geological and mineralogical mapping at Mufulira Mine. This publication provides useful mineralogical and geological relationships, which could be used in exploration.

Career History

2006 – Superintendent Technical Services, Nampundwe Mine, KCM Plc.
2006 – 06 Senior Geologist (Prod. Res. Eval, KDMP Expansion & Hydro), No. 3 Shaft, KCM Plc
2004 – 06 Production & Exploration Geologist, Chingola B Portal, Konkola Copper Mines Plc
2004 – 04 Senior Geologist, Central Shaft, Nkana, Mopani Copper Mines Plc
2003 – 04 Project Geologist, Luanshya and Baluba Mines, Roan Antelope Copper Mines Plc
2000 – 03 Sectional Geologist, Luanshya Mines, Roan Antelope Copper Mines Plc
1998 – 00 Trainee Geologist, Luanshya Mines, Roan Antelope Copper Mines Plc

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1069)

Go to Search Parameters...

Brief Description

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

Planning / Project Controls Manager , PMP certification, Primavera 3.1 / 6 professional user, Civil Engineer, Cost Control and Claims experience

Multi lingual professional with MBA in Supply Chain Logistics. A proven effective communicator and negotiator with extensive experience in field operations supporting military, humanitarian and commercial operations.

Currently working as a Mining Technical Services Superintendent with 10years underground mining expeirence. I hold a B.Min.Sc. in Geology.

Automation/Electrical/Instrumentation/Supervisor

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

Master in management, law enforcer, founder of community service organization APO St. Anne College Lucena City

B.Tech (mining) with 1st class mine managers certificate issued by the board of mining examinations

Drilling professional for 20+ years; extensive international well construction supervisory experience; directional, drilling engineering and management experience; drilling project manager of China’s first horizontal multilateral CBM well.

As a Mining Engineer, I have technical knowledge and managament skills. Computer skills (MS Word, Excel, Power Point). Drilling, Blasting. Tunneling. Development, Preparation and Production.

Masters Degree Construction Management / Experience on Multi-Billion Dollar Greenfield Projects / Russia Experience / Civil Field Engineering / Contracts Supervision & Administration / Field Supervision / Construction Management / Scheduling / Estimating / Specification and Procurement of Materials

• High financial and numeric ability, establishment of policies and guidelines, playing many strategic roles for Multinational Companies’ Branches in Ecuador, South-America (+15 years)

Comptency Training Specialist - Manager

Mining engineer with experience in strip mining and underground metals mines. Graduating with Master in 2007. Techinical interests in cut and fill mining.

Systems Engineer - SW HW Server Client Microsoft Linux Unix - networking WAN LAN VPN WLAN routing switching - Physics degree and scientific work in high voltage and superconductivity - 2 years mechanical engineering - relocate to anywhere - fluent English, German, French, some Portuguese (braz.)

Sr. EHS Manager Professional, 20+ years

Im msc chemistry qualified chemist worked in iron ore mine in diff field as sampling,chemical and physical analysis, administration

12 years experience in the supply of drilling consumables with 2 years experience in logistics of same. Have done field work and managerial work.

AD qualified professional, Autocad, RTK and Static GPS, Precise Levelling, ArcGis, Pipeline Surveys.

Senior Contract Engineer Trilingual English/French/Spanish Oil and Gas industry, experience in Africa, South America, Europe. Working for a major international engineering company. Mainly contract formulation and admin. but also project and construction management, cost control and planning.

Experienced Engineer, Diverse Background, Mining, Environmental

Project maintenance manager/planner/trainer

Graduate in mining engineering,MBA in Operations Management,5 years experience in opencast mining

Registered Electrical Engineer and trained Quantity Surveyor, able to combine technical knowhow with commercial understanding into Quantity Surveying, Estimating and Sub-contract Administration

Country Manager, Nigeria, The Olive Group. Formerly Chief of Security, River Ranch diamond mine Zimbabwe, corporate security manager, Riyadh, security manager KPC Indonesia, Graphtan Tanzania, 23 years in British Army Int Corps, Worldwide experience in military security operations.

Graduated Mechanical Enginner with Extensive Experience in Europe, Australia and Africa in Power generation, Oil Exploration, Mining Industry

Auto Cad R-12-14, Auto Cad 2000, Uni Graphics 15.1 and 16, Solid Edge (Not in practice now), Power Builder 6.5 and 7.0 (Not in practice now), Java. C++, HTML 3.x, Javascript 1.x, Sybase System 10/11 (Not in practice now), MS SQL 6.0, Oracle 7 and 9i, Oracle SQL*, PL/SQL, Microsoft Access, Fox-Pro 2.

Civil/Structural Field Engineer. Construction Management with large EPCM projects

Extensive Experience in the industry!!

B.Sc Engineer in Metallurgy & Materials Science with 10+ years experience in Quality and HR department

HSE - Occupational Health Doctor / HSE management / First Aid Instructor / clinical doctor with interest in environmental health , public health and tropical medicine

Peter is a highly experienced environmental engineer with significant expertise in oil, gas and mining, regulatory issues, sustainable development, corporate social responsibility and policy development. He is a Chartered Engineer (CEng, MICE), and an Environmental Professional (CEnv, MIEMA)

Over 20 years of diversified management experience with an extensive background in the management, selection and maintenance of vehicle fleets, over the road and off road construction machinery.

3 decades of environmental, health and safety experience in the private and government sectors

Master of Geology, experience from african countries: Projecting, execution and interpretation of prospecting and exploration for branch "Economic Geology" (heavy minerals and gold, placers and hard rocks, greenstone belts terrains/shared rocks).

Diploma In Mech.Engg (spl.in Automobile Engg),Having state of art in hydraulic system, engines, and transmission of Excavators, wheel loader and Dumpers etc.

Communicator, negotiator, manager, natural leader

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

Field Security Management and CorporateConsulting in Oil & Gas Industry and United Nations Organizations in several african, european and american countries.

A seasoned security professional with in excess of 17 years security, investigations and operations management experience

Have around 17 years in the area of Industrial & Process Automation including Safety Systems, which involves Study of process, application development, testing and implementing Control systems Software and Hardware

Mechanical Eng. knowledge and experience in auto industry, applicable to other areas of Engineering. Computer software & hardware knowledge including Simulations, FE analysis in PC, Unix workstation. Expert in developing new processes with implementation and training

Logistics Manager, Rig Manager, Materials Manager

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

Maintenance manager

Camp Manager / Logistics

Project Recruitment Specialist

Geologist, EIT, 11+ years drilling and logging samples for geotechnical engineering projects federal and local roads, highways and structures. Supervised up to 4 field and lab techs for 3 different NDOT roadway and bridge projects. Drilled shaft inspection exp.

30 years experience with structual commercial and residential concrete projects

Looking to work offshore or Turnarounds world wide Mangment & pipe &welding

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out