Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #70537
next resume »»
CONTACT INFORMATION:
View contact information...
EDUCATION: Graduate courses toward M.S., Civil Engineering, Washington International University
B.S. Construction Management, Central Washington University, Ellensburg, Washington
B.S., Mathematics, Washington State University, Pullman, Washington (with 80 credits in civil Engineering courses)
AFFILIATIONS: American Society for Quality (ASQ)
American Society for Civil Engineering (ASCE)
Vice President American General Contractor (AGC) Student Chapter 1989/1990
CERTIFICATIIONS US Army Corps of Engineers Construction Quality Management
AND TRAINING 40-Hours Hazardous Waste Operations and Emergency Response (HAZWOPER); 8-Hour HAZWOPER Supervisor.
AHERA Asbestos Supervisor.
American Concrete Institute Training (ACI)
Energy Absorption System: Certified Lifesaver
American Red Cross: First Aid and Adult CPR
Troxler Electronic Laboratories, Inc. training course for the use of Nuclear Testing Equipment
EXPERIENCE:
2005 to Present Senior Construction Engineer, Obunco Engineering Bellevue WA,
2004 to Feb. 2005 Senior Construction SubTera, Inc. North Bend WA,
2002 to 2004 Senior Quality Control Manager, Bristol Environmental & Engineering Services Corporation, Anchorage, Alaska.
200 to 2002 Staff Engineer to Project Engineer, Amec Earth & Environment Services, Kirkland, WA
1991 to 2000 Field Engineer to Construction Manager, Golder Associate, Inc. Redmond WA.
Area of Expertise
* Civil & Geotechnical Engineering
* Construction Management
* Commercial and Residential buildings
* Construction Quality Assurance/
Quality Control
* Roads & Bridges
* Tunneling
* Oil and Gas Pipeline
* Soil nailing
* Wood frame
* Steel & Concrete
* Blasting
* Construction Vibrations
* Soil and Groundwater Remediation
* Fuel Storage Tank Decommissioning
* Landfill
* Demolition
* Surface mining
PROFESSIONAL SUMMARY
Mr. Adeyemi has 20 years of progressive experience in heavy civil construction work. His background includes construction management (CM) and quality control (QC) services.. His duties have included directing, monitoring, and controlling; reviewing conformance with design criteria through review of maps, plans and specifications, cost estimates, change orders, contract payments, assessment rolls, permits, and related work. Mr. Adeyemi also has managed structural foundation, bridges, Tunnels, road and railroad construction; and underground utilities. Mr. Adeyemi has worked on Construction monitoring of excavation, soil nailing, hole drilling, drill rigs and methods, tendon installations, grouting, structural wall facing and drainage, nail testing and groundwater remediation, subsurface characterization and investigation, environmental site assessment (ESA), environmental surveys, underground storage tanks (USTs), and field inspection projects.
EXPERIENCE IN SURFACE MINING, QUARRYING, BLASTING AND CONSTRUCTION VIBRATIONS
Bayo Adeyemi has experience in surface and subsurface blasting for civil construction and mining. His experience includes pre-blast property inspections and surveys, blast monitoring and blast optimization. The following paragraphs document Bayo's explicit project experience.
* Hazelwood Elementary No. 403: Responsible for conducting pre-blast survey of residencies located within the City of Newcastle adjacent to a proposed blast construction site. For the Renton School District.
* Elliott Bridge, Renton WA: Responsible for monitoring vibrations from an Oscillating Pile Driver that was used to construct new bridge piers and preparing a report documenting vibration effects with this method of construction. For Malcolm Drilling.
* 124th Street Bridge Redmond, WA: Responsible for monitoring vibrations from a Vibrating Hammer used to install 5-ft diameter steel casing that was used to construct new bridge piers adjacent to the Sammamish Slew and preparing daily reports documenting vibration effects with this method of construction. For Malcolm Drilling.
EXPERIENCE IN CONSTRUCTION MANAGEMENT and QUALITY CONTROL FOR INFASTRUCTURAL CIVIL & GEOTECHNICAL ENGINEERING PROJECTS
Mr. Adeyemi has extensive experience in overseeing and managing large complex civil engineering projects involving the construction of slurry walls, soil nail and conventional retaining structures, earthen dams, sediment ponds and surface water management facilities, roadways, concrete pavement, and surface structures. He has also provided CM and QC services for hazardous waste landfills and clean up projects conducted under state and federal orders. The following paragraphs document Bayo's explicit project experience
* Blackbird Mine Site Group (BMSC) ) Construction Manager for Phase I, Phase II and Phase III of this four year Super Fund project, located in Lemhi County Idaho under Administrative Order of Consent (Docket No. 10-95-0083-CERCLA, June 15, 1995. The water quality, habitat, and aquatic biota in Big Deer Creek and Panther Creek were improved to levels capable of supporting all life stages of anadromous and resident salmonoids.
* Project activities performed included: construction of a slurry wall; construction of an earthen diversion dam and two earthen sediment dams; excavation for a dam foundation and core trench, and foundation grouting; construction of diversion ditches, sediment ponds, and drop structures road improvements and new road construction; construction of a foundation drainage systems in a repository for waste rock; waste rock removal; and waste rock test plot construction; surface soil sampling; ground water monitoring well installations, testing and sampling; adit water sampling; stream water quality profiling; surface water sampling; construction of the 7100 Dam for temporary storage of contact water; construction of a new spillway for the clean water dam; construction of diversion and collection ditches; water treatment plant facilities upgrade; and construction of an alluvial groundwater cutoff wall. This $65,000,000 project was completed on time and within the allotted budget.
* U.S. Army Corps of Engineers, Alaska District White Alice Site Removal Action Northeast Cape, St Lawrence Island, Alaska Contact No. DACA85-02-C-0011. Contractor Quality Control System Manager responsible for Plans and reports; Providing and improving access to the work sites; Removal of above storage tanks (ASTs) and fuel lines; Removal of containerized hazardous and toxic waste (Con-HTW); Removal of drums and miscellaneous items and debris; Removal of septic systems, utilidors, and water wells; Removal of former power and communications poles and wires; Removal abatement of asbestos, and Demolition and Removal of buildings, a tram, and other structures and appurtenances. The $12,000,000 project was completed on time and within the allotted budget.
* Terminal 18 Development three year Project (New Harbor Island) for the Port of Seattle and SeaTac Airport: Construction Quality Control Manager responsible for: The construction of the new Harbor Island roadways; temporary traffic control; roadway excavation; constructing new roadway with either asphalt or concrete pavement over base course; installing cement concrete curb, gutter, and cement concrete side work; single faced concrete barrier; beam guardrail; Impact attenuators; driveways; curb ramps; installing Pavement markings; temporary and permanent signing; sign structure; removing existing signal systems and installing new signal systems; constructing retaining walls; maintenance buildings: railroads; parking lots, and landscaping.
* Extensive modifications to the existing utilities on Harbor Island included: petroleum pipelines; water utilities; storm drainage; sanitary sewer; natural gas systems, and communication systems. The $300,000,000 project was completed on time and within the allotted budget
* Soil nailing projects (i.e., temporary nail shoring wall) 5th/Yessler, Seattle, WA; and El Portal Road reconstruction, Yosemite National Park, CA): Construction monitoring of excavation, soil nail, hole drilling, drill rigs and methods, tendon installations, grouting, structural wall facing and drainage, nail testing (ultimate, verification, proof, creep tests).
* Puget Sound Energy Steel pole foundation Seattle, WA: Inspection included compliance with Geotechnical construction specifications, reinforcement cages, excavations, reinforcement placement, documentation, concrete testing, environmental concerns, and public relations.
* Modules 7 and 8 at the Columbia Ridge Chemical Waste Landfill in Arlington, Oregon: Responsibilities included directing and controlling work activities to ensure compliance with design and specifications; preparing and assigning work to field inspectors; and maintaining records of all laboratory testing, material testing, and Contractor Quality Assurance/Contractor Quality Control (CQA/CQC) information.
* Site Analysts, Redmond, Washington. Functioned as the project Quality Control manager for a soil remediation project at a former petroleum bulk site. Responsible for adherence to client's specifications related to the excavation and removal of contaminated soil; development of documentation measures and procedures for transport and contaminated soil waste tracking; coordination of the disposal of the waste material; institution of soil testing procedures program in compliance with agency requirements; and performance of analytical data validation to insure agency recognition of a successful remediation.
* Resident Engineer for United State Courthouse building, Seattle Prepared and assign field inspection work orders. Reviewed submittals such as shop drawings, certificate of compliance, plans/specifications, material samples, construction activities work plan, manufacturer data and test reports for approval. Coordinate work activities between subcontractor and contractor. Attend construction quality control and progress meetings. Review all the structural weld, concrete, epoxy dowel and fire proofing test reports
* Resident Engineer for the Terminal 5 Development Project for the Port of Seattle:
* Construction Quality Control Manager responsible for: The construction of the new Harbor Island roadways; temporary traffic control; roadway excavation; constructing new roadway with either asphalt or concrete pavement over base course; installing cement concrete curb, gutter, and cement concrete side work; single faced concrete barrier; beam guardrail; Impact attenuators; driveways; curb ramps; installing Pavement markings; temporary and permanent signing; sign structure; removing existing signal systems and installing new signal systems; constructing retaining walls; maintenance buildings: railroads; parking lots, and landscaping.
* Extensive modifications to the existing utilities on Harbor Island included: petroleum pipelines; water utilities; storm drainage; sanitary sewer; natural gas systems, and communication systems. The project was completed on time and within the allotted budget.
* Resident engineer/ CQA Manager for the construction of a Debris Handling Building. The project included a double composite lining system and a solution collection and recovery system. Performed QA monitoring of soil and geosynthetic liners and closures.
* Environmental Science and Engineering, Redmond, Washington. Functioned as the project Quality Control Officer for an Environmental Site Assessment (ESA) at a decommissioned bulk fuel storage facility confirmed to have petroleum impacted soil. Responsible for the development and institution of a 3-phase quality control plan with the client that delineated the definable tasks for each ESA action area (Phase I--research, Phase II--exploration and Phase III--remediation) and set time and agenda for preparatory, initial, and follow up construction quality control meetings. The $300,000 project was completed on time and within the allotted budget.
EXPERIENCE IN VARIOUS OIL & GAS PIPELINES: TRANS-ALASKA PIPELINE SYSTEM (TAPS), ARCO/PHILLIPS ALASKA INC. LIQUEFIED NATURAL GAS (LNG)
Managed Alpine Development Project on the North Slope for ARCO/Phillips Alaska Inc. Mr. Adeyemi supervised the construction of $600 million oilfield development project, including the following tasks:
* Managed settlement-critical transition zones for the hot oil and seawater pipelines horizontal directional drilled (HDD) crossing of the Colville River, and designed engineering measures to maintain stable riverbanks and limit settlement of the crossings during the design life of the pipelines.
* Performed a geotechnical investigation of permafrost soils to provide design data for building and bridge foundations, pipeline vertical support measures, and road and airstrip design.
* Managed module foundations, roads, pads, an airstrip, erosion control measures, a tank farm, and related facilities.
* Managed river and coastal specialists to set design parameters for gravel structures and pipelines in the coastal and river-delta environment.
* Obtained permitting authorizations and monitored surface water during HDD operations.
* Managed engineering in support of pipeline right-of-way and gravel structures wetlands permitting.
* Managed hydrology projects, including breakup studies, flood frequency analyses, spring breakup and monitoring studies, and updates to a 2-D Finite Element Surface Water Model for the Colville River Delta.
* Project Manager and Project Engineer for five separate Trans-Alaska Gas Pipeline projects for various clients in Alaska. The projects, which included both gas transmission and gas export projects, involved proposed 800-mile-long or longer natural gas pipelines across Alaska. Tasks included engineering terrain unit analysis; pipeline moding analysis and moding algorithms; frost heave and thaw settlement analysis, mitigation, and conceptual design; permafrost and geotechnical studies; river crossing evaluation; compressor station sitting and engineering; workpad analysis; construct ability reviews; route analysis; Project Description, Design Basis, and Design Criteria Document preparation; review of existing design studies and preliminary designs, previously submitted permit documents, and other literature; updating a lands list, preparation of a Geographical Information System (GIS) for land status, and researching unique land status issues; cost estimating; risk analysis; liquefied natural gas (LNG) facility site evaluations; LNG facility site layout; review of codes affecting design and construction of LNG facilities, including recommending changes to code committee; negotiating with state and federal regulators; and other related tasks.
* Project Manager and Project Engineer for three separate Kenai Peninsula pipeline projects, including the Tustumena Pipeline, Wolf Lake Pipeline, and Kenai-Kachemak Pipeline, for various clients. Engineered and managed multiple tasks for these natural gas pipeline projects, including route evaluation, route map preparation, permit analysis, river crossing alternative analysis, HDD analysis and design, geotechnical investigation and analysis, economic analysis, preparation of a lands list, preparation of a state right-of-way permit application, preparation of an alignment sheet, preparation of construction "typicals," risk analysis, buoyancy control, thermal analysis, permit negotiations, cost estimating, and other related tasks.
* Performed various civil engineering projects along the Trans-Alaska Pipeline System (TAPS) for Alyeska Pipeline Service Company. The primary projects, which follow, included civil monitoring, maintenance and repair, feasibility studies, final design, and operations engineering:
* Project Engineer for the 147-mile-long fuel gas pipeline that fueled Pump Stations 2, 3, and 4,
* performing monitoring, civil repairs at stream crossings, corrosion investigations, thermal analysis, and repair of pipeline segments that had buckled out of the ground.
* Project Geotechnical Engineer for the Ship Escort Response Vessel Dock/Valdez Emergency Operations Center project, which included onshore and offshore geotechnical investigation and pile testing, bathymetry surveys, and geophysical investigations
.
* Project Engineer for upgrading access (linewide) for oil spill contingency response, including roads, boat ramps, and bridges.
* Project Engineer responsible for monitoring and repairing river training structures and river and floodplain crossings, and performing design of new river training and erosion control projects.
* Project Engineer responsible for working extensively on monitoring and repairing facility foundations on permafrost.
* Field Operations Engineer responsible for supporting and overseeing multidiscipline projects across the northern 200 miles of the pipeline.
* Soil and Groundwater Remediation:
* Groundwater Remediation, Tyrells Pet Food Plant, Seattle, Washington. Managed a product recovery program for the removal of hydraulic oil using an in situ free–phase hydrocarbon recovery system.
* Soil Remediation, Tacoma, Washington. Performed a feasibility study of remedial options and managed the removal and transport of approximately 2,200 cubic yards of gasoline-affected soil to a thermal treatment facility.
* Soil and Groundwater Remediation, Mount Vernon, Washington. Performed a feasibility study of remedial options and managed the installation of an air sparking and vapor extraction system to remediate gasoline-affected soil and groundwater around an operational UST basin.
* Soil and Groundwater Remediation, Redmond, Washington. Performed a feasibility study of remedial options and managed (1) the removal, transport, and disposal of approximately 2,000 cubic yards of gasoline-affected soil to a landfill facility and (2) removal and disposal of petroleum-affected groundwater.
* Subsurface Site Characterizations and Investigations:
* Mr. Adeyemi managed site characterization programs for each of the remedial investigations described below.
* U.S. Navy, Adak, Alaska. Consisted of grid installation, surface soil sample collection, field sample analysis, and data interpretation at an equipment storage yard with petroleum and polychlorinated biphenyl (PCB) contamination.
* Mayer, Brown & Platt, Vashon, Washington. Consisted of drilling and installing groundwater monitoring wells at a retail mall that formerly contained a gas station.
* Petrocard Systems, Inc., Marysville, Washington. Consisted of (1) drilling soil probes and borings and (2) sampling soil and groundwater at 12 Pacific Pride stations in western Washington.
* SWF Machinery, Kennewick, Washington. Consisted of drilling soil boring and soil sampling in an abandoned drain field at an operating machine shop.
* Echlin, Inc., Canby, Oregon. Consisted of drilling soil borings and soil sampling at a proposed industrial building site.
* Circle K Corporation, Clarkston, Washington. Consisted of drilling of soil borings and sampling soil at an operational market and petroleum dispensing facility.
* Ashland Oil Company, Spokane, Washington. Consisted of drilling of soil borings and soil sampling at two former gasoline stations.
* Amerco Real Estate, Kennewick, Washington. Consisted of drilling of soil borings and groundwater sampling at an automotive service center with confirmed releases of petroleum products, PCBs, and chlorinated compounds.
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1001 to 1050 of 1269)
Go to Search Parameters...
Brief Description
Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi
Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection
I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )
Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.
I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.
I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.
I am Proficient in Process Modeling/Simulation and Oil & Gas Production Optimization using Nadal Analysis (SAM, PERFORM, PROSPER). I have experience in Oil Analysis, NDT corrosion inspection, and equipment condition monitoring.
Experienced Automation/Process Control Engineer
Tender Administrator
Master Mariner and have experience as Senior Officer on LPG Carriers
10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems
I am confident that my training and experience in the area of safety and health as well as international teaching and program development skills would benefit a company that is seeking to excel in this area.
Organizational Development •Procurement & Purchasing Systems & Hardware • Operations Management •Business Development • System Analysis • MIS Administration • Inventory System Control • Team Management • Regional ICT Management • Regional MIS Management • Regional Database Management
My name is A. Pradeep Kumar, I have completed my post graduation in Applied geology from osmania university in 2004.and now I am working as a geologist in trimex international fze;dubai. I have experience in seismic processing and interpretaion,where i used soft wares life PROMAX,FECOU5.3 ,GEOGRAPHI
Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.
Project Control (Cost & Planning) with +5 years of exp
Free!
In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.
Over 12months experience as a Field Assistant in Mt Isa QLD. Core Sampling, Gridding, RC and Diamond Drill Pads, Diamond Core Saw Operation. Willing to be trained also willing to relocate for the right position.
Seeking a position in Quality Control/Assurance Management where my extensive background, abilities and expertise will be used efficiently.
Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)
Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.
Environmental Consultant (Engineer/Scientist)/Geoscientist
Dear Sir, I am a highly motivated person who works hard to accomplish my vision for the Future. The success of your company fits perfectly within my vision, and I firmly Believe I possess the tools to help your company thrive. In my most recent experience, I took on a leadership position a
I am a professionally qualified Process Engineer with experience of process and product development, as well as quality control at Energy and Telecommunication Industries. I am accomplished to multinational environment, related to process modeling, project leadership, quality control and auditing.
Chemical Engineering, Control System engineer. Pipeline operation. Catalyst
Livelink Administrator, Causeway Collboration Administrator
I completed my Bachelor of Science in Agricultural Economics and Agribusiness in the year 2001 and have completed the MBA programme majored in International Business in August 2008.
Catia, Solid Works, Solid Edge, Pro/ENGINEER, Adobe, Microsoft Office ( PowerPoint, Access, Project ), Photoshop, Blue Prints, Design, Product Development, Plant Layout Strategy, Six Sigma, Lean Manufacturing, 5S, , Injection Mold Press, Class A/CDL license, Lathe, Forklift, Donkey-lift, Milling
I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.
Camp, facilities, catering Management
Have a 2 busy season experience at mining industry
I have over eight years experience within the recruitment market both in Australia and within South East Asia. I have acquired a wealth of experience servicing some of Australia’s largest mining, energy and construction organisations and have developed extensive skills in recruitment and HR.
Quality Control Senior Chemist
Mining Engineer with Business Administration experience in one of the world's largest cement company
With 20yrs of my experience, I have developed a sound background in infrastructure civil project and management, methods and procedures, which includes Commercial & Residential buildings, Roads, bridges, Tunneling, Dams, Environmental Remediation and Extensive Construction Quality Assurance/Quality
A young, dynamic, astute, confident, result-oriented and self motivated person with the ability to handle pressure of a working environment and also work well within a team. Smart in appearance, proven starter with strong analytical skill and an enthusiastic fast learner.
HUMAN RESOURCE PLANNING, ADMINISTRATION, RECRUITMENT & SELECTION, ORIENTATION, TRAINING & DEVELOPMENT, PERFORMANCE MANAGEMENT & EMPLOYEE RELATION MANAGEMENT
I'm a P.Geo with a B.Sc. Hons in Geological Sciences and 5 years experience (dominantly exploration), varying from core logging to project planning. I set high standards for myself and I work extremely hard to complete anything I set out to do. I'm organized and I pride myself on perfection.
As site Geophysicist/ project coordinator in UNICEF (United Nation Children and Education Funds), Geologist for GABIMO ENGINEERING CO LTD and National Water Resources Institute my principal responsibilities were to ensure that all projects were carried out in consonance with requirements and standar
HR Professional seeking Middle / Senior Management Position
All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting
COMPUTER SKILLS, AND CAPACITY TO DO WORK WITH EVERY KIND OF PERSON
Planning/Schedule Engineer,Maximo IMplementor,
Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development
With a demonstrated commitment to establishing and maintaining safe work practices, I am seeking to positively contribute to a progressive organisation, and wish to be considered for employment as the Emergency Manager. I have over 14 years experience within the emergency services sector, consider
Corporate Finance, Program Management, Management Consulting, Audit, Accounting, Business advisory services
I am a multiskilled candidate with more than two years experience. I have acquired Engineering as well as Business Education. I am fully convesant with Corrosion Prevention system for Underground pipings, API 650 standards for tank design and HSE standards.
Logistician in all logistical related fields. All logistical work has been conducted overseas.
Projects Management / Technology Consultant / Business Development & Management of Information Systems
Possess a background in Security including BS Justice Studies, US Military, Federal Law Enforcement, and Int'l Security Mgmt experience.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
[ 21 ]
22
23
24
25
26
Seach Parameters
Change search parameters...
CATEGORIES:
Management;
INDUSTRIES:
Mining;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com