Resume - I started my career in 1991. I am a qualified fitter & turner (trade) Currently ...

Misco Jobs

Resume #77142

CONTACT INFORMATION:
View contact information...

Years of Experience: 17 years Present Location: South Africa

Expertise

Category Subcategory Ability Experience
Artisan Mechanical & Experienced 17 years
Maintenance
Technician Level Mechanical & Experienced 13 years
Maintenance
Management / Mechanical & Experienced 5 years
Foreman Maintenance

PERSONAL PROFILE

I have a total of more than 17 years experience in oil and gas sector (Petro SA) onshore. I started my career in 1991 and after serving a full apprenticeship, I qualified as a fitter & turner. The majority of this time I spend in the machine shop, valve shop, turbine shop and on site. This equipped me with excellent skills and knowledge in the petrochemical sector.

In 2007 I made a career change; I was offered a senior position as a researched and development foreman (TMS Group Industrial Cleaning). Still working hand in hand with the petrochemical sector (Sasol, Engen, Sapref refineries).

I am of opinion that the diversity in my career has equipped me with the required skills to meet all standards. I regarded myself as an excellent leader and a good team player, accepting criticism and dealing calmly and effectively with high stress situations.

I approach my work in a safe and professional manner; my goal is to add value to an organization by using my skills abilities to the advantage of the organization.

CAREER HISTORY

PERIOD: COMPANY NAME: POSITION HELD:

1991 to 1995 Petro SA Apprenticeship

* Served a full apprenticeship at Petro SA (petrochemical refinery)
* Spend my time in machine, valve, and turbine shop; where I learned all the necessary skills to become an artisan.
* This skills included all the measuring equipment (verniers, micrometers ect.)
* Marking off, drilling holes.
* Learning thread cutting (metric, imperial, acme and trapezoidal)
* Assisting in overhauling pumps (single and multi stage pumps etc.)
* Alignment of pumps and motors.
* Stripping and assemble of valves (gate valves, boll valves, psv's, etc.)
* Basic turning and milling.
* Drill shapner machine, tool and cutter grinder and basic surface grinding.
* Basic programming.

PERIOD: COMPANY NAME: POSITION HELD:

1995 to 2007 Petro SA Qualified - Fitter & Turner

* Turning and milling operations that require complex calculations, very close tolerances with a range of materials, with minimal supervision.
* Interpret and produce complex engineering drawings and job/work instructions.
* Apply quality check on machined components.
* Adhere to safety rules and regulations (occupational health and safety etc.).
* Understanding of safe work procedures.
* Internal and external grinding of complex components (cylindrical grinder).
* Horizontal boring and vertical boring (gate valve seats and wedges) using a range of accessories and tools.
* Tool and cutter grinding.
* Surface grinding to tolerances.
* Programming and operation of all the following cnc machines.
* Cnc turning – Mazak Quick turn 32 - Mazatrol T32/2 controls
Mazak 150, 200 - Lexis nexis controls
* Cnc Milling – Sachmann - TNC 355 controls Heidenhain
* Boring mill - Union - iTNC 530 controls Heidenhain
* Machining of all plant related jobs.
* Ensure adherence to quality standards and maintaining all related documents.
* Servicing and maintaining single and multi stage pumps.
* Maintain gearboxes.
* Refurbish machines.

* Servicing and maintaining and testing valves this includes safety valves.
* Basic experience in maintaining compressors.
* Perform preventative / proactive maintenance.
* Working strictly to permit procedures and followed correctly.
* All work done safely within time limits and according to ISO standards.
* Involved in shutdowns and break down jobs.
* Done six shutdowns as a supervisor in the time I worked for Petro SA.

PERIOD: COMPANY NAME: POSITION HELD:

2007 - current TMS Group Industrial Services Research & Development
Foreman

* I am currently in charge of a workshop where we do manufacturing and designing on high pressure equipment. This equipment is used by us on the refineries.
* Working strictly to ISO 9001: 2001 (international standards),
* NOSA 14001:2004 (environmental) and
* Safety and Health 18001:2007
* Working hand in hand with safety and ISO standards ensuring that the correct procedures are in place to prevent accidents and deliver a top quality product.
* Excellent management skills of planning.
* Expertise in implementing cost saving measures to achieve substantial reduction in terms of man days, project cost, raw materials.
* A keen strategist and planner with skills to enhance workshop productivity.
* An excellent communicator with good analyzing and problem solving skills.

Maintenance
* Planning and effective preventive maintenance schedules of various machines and instruments to increase machine time and working strictly towards time limits.
* Making sure equipment is being maintained.
* Reducing repair time thereby increasing productivity.
* Executing cost saving and work within the budget.
* Exposure to the maintenance of hydraulics and pneumatics.

Management
* My management skills have made myself and my team grows into a strong business, working safely and efficiently.
* An excellent communicator with good analyzing and problem solving skills.
* Assuring that staff understands the risks involved while working with machines and in refineries and know what action to take in case of incidents.
* Involved in training people to improve there knowledge and increase production.
* Compiling weekly and monthly reports.
* Promote cost saving within the team (reduce consumable costs etc.).
* Carrying out appraisals & performance reviews and providing feedback to the team.

Quality Control/Assurance
* I am involved in QC where we got a team that goes out checking and making sure that the quality of our work is of high standard.
* Ensure adherence to quality standards and maintaining all related documents.
* Identify areas of quality failures and take steps to rectify the system.
* Practicing quality standards with key emphasis on improving quality.
* And providing a service to our clients that walk hand in hand with safety.

EDUCATION & TRAINING

1988 Hugenote High School Grade 12

1995 Department of Labour Trade Test / Fitter & Turner
Manpower Training no. S95/282

2003 School of Welding Competent persons pressure
Technology. Vessel inspection

2007 School of Welding Welding/Fabrication Inspector Level1
Technology. Magnetic Particle Testing Level 1 and 2
Penetrant Testing Level 1 and 2

Safety Training
* Combined Offshore Survival & Firefighting.
* Under water Escape Training.
* First Aid Training.
* NOSA Health & Safety Representative Training.
* Hazardous Materials Training.
* Breathing apparatus Training and confined space.
* Permit to work course.

Job related Training
* Carry Deck Crane – Capacity 8000 Kg, Code 43.
* Overhead Crane Pendant Control – Capacity 40000 Kg, Code 30.
* Reciprocating Compressor training Program. (Thompson)
* SKF 603 Bearing Maintenance and Service Certificate.
* Certificate in CNC Heidenhain Programming (Tshwane University of Technology).
* Mazak – Mazatrol course.
* Certificate in Tyco Valves & Controls / Pressure Relief Valve course.

Management and Supervision
* Certificate in basic management.
* Shutdown supervisory training course.

QC and inspection courses
* Welding/Fabrication Inspector Level 1
* Penetrant Testing Level 1 and II

* Magnetic Particle Testing Level 1 and II
* Starting Quality Engineering Diploma.

Computer skills
* SAP Training.
* Microsoft officeWord and Excel training.
* E-mail

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 1268)

Go to Search Parameters...

Brief Description

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

I am Proficient in Process Modeling/Simulation and Oil & Gas Production Optimization using Nadal Analysis (SAM, PERFORM, PROSPER). I have experience in Oil Analysis, NDT corrosion inspection, and equipment condition monitoring.

Experienced Automation/Process Control Engineer

Tender Administrator

Master Mariner and have experience as Senior Officer on LPG Carriers

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

I am confident that my training and experience in the area of safety and health as well as international teaching and program development skills would benefit a company that is seeking to excel in this area.

Organizational Development •Procurement & Purchasing Systems & Hardware • Operations Management •Business Development • System Analysis • MIS Administration • Inventory System Control • Team Management • Regional ICT Management • Regional MIS Management • Regional Database Management

My name is A. Pradeep Kumar, I have completed my post graduation in Applied geology from osmania university in 2004.and now I am working as a geologist in trimex international fze;dubai. I have experience in seismic processing and interpretaion,where i used soft wares life PROMAX,FECOU5.3 ,GEOGRAPHI

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Project Control (Cost & Planning) with +5 years of exp

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Over 12months experience as a Field Assistant in Mt Isa QLD. Core Sampling, Gridding, RC and Diamond Drill Pads, Diamond Core Saw Operation. Willing to be trained also willing to relocate for the right position.

Seeking a position in Quality Control/Assurance Management where my extensive background, abilities and expertise will be used efficiently.

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Environmental Consultant (Engineer/Scientist)/Geoscientist

Dear Sir, I am a highly motivated person who works hard to accomplish my vision for the Future. The success of your company fits perfectly within my vision, and I firmly Believe I possess the tools to help your company thrive. In my most recent experience, I took on a leadership position a

I am a professionally qualified Process Engineer with experience of process and product development, as well as quality control at Energy and Telecommunication Industries. I am accomplished to multinational environment, related to process modeling, project leadership, quality control and auditing.

Chemical Engineering, Control System engineer. Pipeline operation. Catalyst

Livelink Administrator, Causeway Collboration Administrator

I completed my Bachelor of Science in Agricultural Economics and Agribusiness in the year 2001 and have completed the MBA programme majored in International Business in August 2008.

Catia, Solid Works, Solid Edge, Pro/ENGINEER, Adobe, Microsoft Office ( PowerPoint, Access, Project ), Photoshop, Blue Prints, Design, Product Development, Plant Layout Strategy, Six Sigma, Lean Manufacturing, 5S, , Injection Mold Press, Class A/CDL license, Lathe, Forklift, Donkey-lift, Milling

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

Camp, facilities, catering Management

Have a 2 busy season experience at mining industry

I have over eight years experience within the recruitment market both in Australia and within South East Asia. I have acquired a wealth of experience servicing some of Australia’s largest mining, energy and construction organisations and have developed extensive skills in recruitment and HR.

Quality Control Senior Chemist

Mining Engineer with Business Administration experience in one of the world's largest cement company

With 20yrs of my experience, I have developed a sound background in infrastructure civil project and management, methods and procedures, which includes Commercial & Residential buildings, Roads, bridges, Tunneling, Dams, Environmental Remediation and Extensive Construction Quality Assurance/Quality

A young, dynamic, astute, confident, result-oriented and self motivated person with the ability to handle pressure of a working environment and also work well within a team. Smart in appearance, proven starter with strong analytical skill and an enthusiastic fast learner.

HUMAN RESOURCE PLANNING, ADMINISTRATION, RECRUITMENT & SELECTION, ORIENTATION, TRAINING & DEVELOPMENT, PERFORMANCE MANAGEMENT & EMPLOYEE RELATION MANAGEMENT

I'm a P.Geo with a B.Sc. Hons in Geological Sciences and 5 years experience (dominantly exploration), varying from core logging to project planning. I set high standards for myself and I work extremely hard to complete anything I set out to do. I'm organized and I pride myself on perfection.

As site Geophysicist/ project coordinator in UNICEF (United Nation Children and Education Funds), Geologist for GABIMO ENGINEERING CO LTD and National Water Resources Institute my principal responsibilities were to ensure that all projects were carried out in consonance with requirements and standar

HR Professional seeking Middle / Senior Management Position

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

COMPUTER SKILLS, AND CAPACITY TO DO WORK WITH EVERY KIND OF PERSON

Planning/Schedule Engineer,Maximo IMplementor,

Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development

With a demonstrated commitment to establishing and maintaining safe work practices, I am seeking to positively contribute to a progressive organisation, and wish to be considered for employment as the Emergency Manager. I have over 14 years experience within the emergency services sector, consider

Corporate Finance, Program Management, Management Consulting, Audit, Accounting, Business advisory services

I am a multiskilled candidate with more than two years experience. I have acquired Engineering as well as Business Education. I am fully convesant with Corrosion Prevention system for Underground pipings, API 650 standards for tank design and HSE standards.

Logistician in all logistical related fields. All logistical work has been conducted overseas.

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Possess a background in Security including BS Justice Studies, US Military, Federal Law Enforcement, and Int'l Security Mgmt experience.

Graduate with 5+ yrs of experience

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out