Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #78 next resume »»
CONTACT INFORMATION:
View contact information...

EQUIPMENT OPERATED: JACKLEGS, JUMBOS, TRACK MUCKERS - J12’S + J21’S, 911’S, 912’S, 913’S, 915’S, ST5’S, HAUL TRUCKS, SINKING HAMMERS, 966 - 988 CAT FRONT END LOADER, AND CRAUTERMAN.

EMPLOYMENT RECORD

Geo Grout, Inc.: 04-29-00 / 06/16/00. Glenn, CA.
Driller and grout pump operator. Drilled holes for grouting levee on Sacramento River. $22.86 per hour. Supervisor: Hector Quiles

Frontier-Traylor Bros.: 10-21-96 / 11-14-97. Portland, OR.
Safety Technician on the Tri-Met light rail system.
Worked shift work doing on site safety in tunnels: pertaining to pouring
Concrete; grouting; installing rebar, hi-rail gear, equipment relating to track
and safety specifications; yard safety insuring that all hands operating
equipment are task trained before they are allowed to operate equipment.

OSHA requirements on site, both yard and tunnels; personnel to use PPE
at all times; safety belts and climbing harnesses; ventilation requirements for tunnel; hi-rail safety chocks (wheel). Markers for rail; wearing of safety
vest (orange with bright tape) while in tunnel and around yard for visibility;
safety glasses.

Guy F. Atkisson: 09-93 / 10-93. Buck’s Lake, CA.
Dave Brewton (Walker). PG&E power station. $22.75 per hour as a miner. Worked the bullgang cleaning up at the end of the job. Rehired from August as they let too many hands go and then had more work to do.

Independent Mining: 08-93 / 09-93. (Centennial Development, Riverton, UT)
    Elko, NV. Decline. $16.00 per hour and $40.00 per day subsistence.
Ran motors, jackleg, drilled and shot, hung utilities, general bullgang
duties.

Guy F. Atkisson: 07-93 / 08-93. Buck’s Lake, CA.
Dave Brewton (Walker). PG&E power station. $22.75 per hour. Miner
worked the bullgang until laid off.

Morrison-Knudsen: 08-26-91 / 02-28-92. Keddie, CA.
    Lock Spencer (Superintendent) and Matt Needles (Project Manager)
    $17.35 per hour. Miner – set steel, lagged steel sets, poured concrete,
grouted, shot-creted. Ground support on old railroad tunnel that had
burned and caved in. Equipment maintenance and prepare deck for next
phase.

National Projects: 02-23-91 / 04-23-91. Jacumba, CA.
    Lock Spencer (Superintendent) and Matt Needles (Project Manager).
$16.50 per hour. Miner – ground support on old railroad tunnel that had
burned and caved in. Stood steel, poured concrete, shot-creted, scaled, drove pilings, and grouted.

National Projects: 09-23-90 / 02-10-91. Christianburg, VA.
    Lock Spencer (Superintendent) $17.50 per hour. I was the Shifter.
Drilled sides to support ribs before cutting top out of tunnel. Grouted ribs,
hung wire for overhead support, shot-creted both portals, back filled with
gravel behind steel sets, and stood steel.

Morrison-Knudsen: 02-90 / 05-90. Martinez, CA.
    Lock Spencer (Superintendent) $16.75 per hour. Miner – drilled overhead
In tunnel for support after we had cut top out of tunnel.

Campbell Construction: 11-01-89 / 11-28-89. Redding, CA, Mercy Hospital.
    Shavon (Superintendent) $20.85 per hour. Miner – used 35 pound
spaders to bell out footings for parking garage.

Shank-Ohbayashi: 03-89 / 09-89. Los Angeles, CA.
    John Shulef (Superintendent) Troy Mongess (Shifter). $17.47 per hour.
    Bullgang – used cutting torch to cut shield out of heading, electric welder
Gun to seal plastic liner to seal out gas and water from tunnel, lay rail, run diesel motor running supplies to work area, roof bolting in areas where needed, cut cross-cut passes for electric station, set forms (both top and bottom of invert), changed out California rail at station and re-installed on other side. (Two tunnels running side-by-side). Remove and install concrete segments in bottom of invert, tied rebar.

Frontier-Kemper: (812) 426-2741 (home office) 09-21-88 / 03-07-89.
    Dave Gibson (Shifter) Tom Lynn (Superintendent) WIPP Site, Carlsbad,
NM. $15.44 per hour. Miner – used slip forms (self-climbing forms on
rods), jackleg, hung wire, liner plate, utilities (6” and 3” lines), rock bolted.

Dravo: (412) 566-6157 (home office) 05-02-85 / 09-17-88. WIPP Site,
Carlsbad, NM. Bud Lucas (Project Manager) $14.27 per hour. Miner –
running Jackleg for roof support, Gettman, LHD, trucks, hanging utilities,
grademan on road header, grading roads, assisting probe hole drillers,
training on road planer and roof bolter.

Ohbayashi-Gumi: (415) 346-6861 (home office) WIPP Site, Carlsbad, NM.
    Dale Blevins (Project Manager), Tom Combs (Superintendent), and
    Lock Spencer (Walker). $14.22 per hour. Miner – grademan on road
header, 912 and 915 loaders, truck driver, bulkheads, utilities (air, water,
and fan lines), jackleg operator for roof support.
Odessa College: (915) 358-4361 01-25-82 / 09-93. Odessa, TX.
Tom Reynolds and Verlon Horn were the immediate supervisors. $1,054.00 per month. Maintenance – electrical, plumbing, structural repairs, and boiler maintenance.

Frontier-Kemper: (812) 426-2741 (home office). 11-05-80 / 03-31-81. Douglas,
WY. Zane Painter (Superintendent) and Don Painter (Walker). $11.00 per hour plus bonus. Shaft miner – drilling with air augers, jackleg, pouring concrete, hanging steel and wooden guides, cutting stations, and
slushing.

Gilbert Corp.: 10-04-80 / 11-03-80. Rifle, CO.
    Shaft miner. $10.00 per hour plus bonus.

Centennial Development: 07-09-79 / 10-03-80. Red River, NM.
Lock Spencer (Walker). $12.30 per hour plus bonus. Leadman – shaft miner. Drilled with sinking hammers, jackleg, hanging steel, cutting stations, driving drifts.

Kerr McGee: 03-16-78 / 07-06-79. Church Rock, NM.
    Don Eroh (Mine Foreman), John Rios ( Walker), and Wiley Brooks,
    (Superintendent). $11.45 per hour plus bonus. Shaft miner – drilling with
sinking hammers, jacklegs, cutting station, changed out pumps, hung steel and wooden guides.

Park City Ventures: (801) 649-8107 12-77 / 02-78. Park City, UT.
    George Cado (Mine Foreman). Ontario Mine. $8.45 per hour plus bonus.
    Miner – worked opening new areas. Worked in stope, drove drifts, ran
electric slusher, jackleg, j12, j21, muckers, utilities, rock bolted. Mine closed 02-78.

Mid-Continent Coal and Coke: (303) 963-2581. 11-77 / 12-77. Redstone, CO..
    Miner – set steel, laid track, roof bolted, worked tailpiece.

Granite-Ball-Groves: 08-77 / 10-77. Dinkey Creek, Wishon Village, CA.
Leonard Jacobson (Walker). $12.10 per hour. Miner – set steel and drove tunnel.

Peter Kiewitt: (801) 882-1360. 07-77 / 07-77. Carrfork Canyon, Tooele, UT..
    Erwin Sass (Superintendent). $11.00 per hour. Miner – worked in station,
    drilled with jackleg putting up mats.

Anaconda: (801) 882-1431. 09-76 / 07-77. Carrfork Canyon, Tooele, UT..
    Fred Smith (Superintendent). $11.00 per hour. Miner – drilled, sinking
    Hammers, jumbo, hung utilities and slick lines.

R. H. Gunn: 07-76 / 09-76. Rock Springs, WY.
    Don Eroh (Superintendent) and David Tatom (Walker). $9.75 per hour.
    Miner – laid track, reclaiming stopes, rock bolted ribs and roof, mucked
    ran muck cars, LHD.

The Oaks at Lake Oroville: 11-73 / 12-75. Oroville, CA.
Andy Anderson (Leadman). $3.75 per hour. Mobile home service and set up.

Oro Dam Motors: 11-73 / 11-73. Oroville, CA.
    Rex McFerrin (Supervisor). $1.85 per hour. Parts salesman.

United States Marine Corps: 09-14-69 / 09-14-73.
    Sergeant. Ordnance detail, artillery, and security at weapons station.
    

View contact information...
«« previous resume next resume »»
Search Results (Resumes 351 to 400 of 1248)Go to Search Parameters...
Brief Description
More than nine years of hard core experience in Early and Advanced Stage Exploration Environment for Diamond (De Beers) and Base Metal (Anglo American).
Experienced safety professional and proven leader in the Environmental Health & Safety environment. I've developed and successfully implemented several innovative injury prevention programs which has resulted in millions of dollars saved in Workers' Compensation expenditures.
Mining and petroleum engineer for 5 years, and safety researcher for mining industrials in indonesia for 2 years.
35 years experience in open pit mining, started as operater worked my way up through the ranks to head of department mining, present employment.
Key Skills:Mine planning, Mines safety, Mines operation & management etc . Qualification : B.E. - Mining
Free! HSE Manager - Value Assurance Manager - Asset Integrity Manager
SNR Supervisor & Superintendent experience currently working offshore
B.S. - Mining Engineering. 20+ years experience as a mining engineer and staff supervisor in open cut copper mining utilizing earth-moving, drilling, blasting, drainage maintenance, and dewatering equipment. Also have several years experience with open-cut coal mining. Willing to relocate.
Over thirty years milling experience, both operating and supervisory positions. Worked extensively with lead, zinc, and gold.
To Obtain a Position as Foreman or in Safety Department
30 yrs. experience in equipment maintenance, operation, and supervision. Expertise: Supervision, planning, cost control, record keeping, PM scheduling, maintenance and repair (electric, diesel, gas), Hydraulics, Pneumatics, Pump and dewatering systems, Milling.
- Over 11 years of management and supervision experience in the mining industry. - Extensive practical experience in mine planning, production optimization, cost control, and safety training. - Good communication and organization skills. - Experience in mine construction.
I am a second year MBA student at The Haas School of Business, U.C. Berkeley with experience in procurement, supply chain, logistics, project management, and consulting. I have 8 years of work experience, specially in supply chain optimization in the Latin American region.
22 years experience of which 12 years with in the oil sector where I had to Implement systems, overseeing accounting and carrying internal auditing missions, Significant experience in start up process, J.V. management, Fluent in English, French and Arabic.
Global HSE Manager
10 years field experience in production, planning and development. Possesseing all the legal and statotory certificates fron Govt. of India
13MONTHS - SAFETY 7 YEARS - SHAFT 5 YEARS - DRIFTS 6 MONTHS - STOPES
Experienced, Bilingual Trainer Seeking HR or Marketing Position in Indonesia
Senior Estimator Available to work in Indonesia, Malaysia, Nigeria, Kazakhastan, Thailand
16 years experience in the mining field both surface and underground, hard & soft rock. Construction and Development. Supervisory exp. Drilling and blasting & instructor. BCOA Supervisory Trained and a Certified Surface and UG MSHA Trainer. Illinois Certified Supervisor. Shot Fire Certified.
Hands on professional with six years experience in OHSE management, analysis & trending, technical document writing, prevention programs, and worker’s compensation. Adept at bridging OHS performance gaps to complete business interests & conveying complex developments in a simple & compelling manner.
E&I Supervisor or Tech
Mechanical fitter, Snr SHE Officer & Mining Eng 2nd year Honours Degree at Leeds University
With a proven record of exemplary senior management, and delivering efficient and productive operations strategies within corporate environments, I am seeking to utilize my comprehensive experience with an innovative and high growth company.
MAINTENENCES MANAGEMENT OF HEAVY EARTH MOVING AND CONSTRUTION EQUIPMENT
3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.
HSEC Training Coordinator, SHE Coordinator, Heavy plant Mechanic and Mechanical Engineer as back ground.
Experienced Mining engineer in large scale openpit Mines with knowledge of SAP and Materials Management and controlled blasting
Project manager
Information Technology Vicepresident / Manager / Director / Project Manager
SENIOR PROFESSIONAL MINERAL EXPLORATION GEOLOGIST/MANAGER with 26 years Global Experience. Gold Specialty but experienced in Base Metals and Diamond. Practicing Independent Qualified Person (QP) for Canadian Securities Reporting and Resource Estimations. MapInfo/Discover GIS User.
Mining Engineer with 30 years experience in metal/precious stones/alluvial deposits seeking managerial or consultant position with new or established mining projects
Construction Civil Superintendent (Earthworks, Infrastructure and Concrete)
I am a well-rounded mining engineer from the Colorado School of Mines (CSM) with 18 years experience, looking for an opportunity to help a surface mining company meet its goals.
20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.
Senior Security Supervisor/Manager
Diamond Exploration and running diamond exploration laboratories,
Recognised qualified person (RQP) under rule 22C of Mineral Concession Rules, 1960, for preparation of Mining Plan and Scheme of Mining as required to be prepared under rule 22B of Mineral Concession Rules, 1960 & Mineral Conservation & Development Rules, 1988. (INDIA)
Project Management & ability to manage all site related activities
Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity
Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.
Expert Contracts and Business Development Manager with more than 20 years of experience with major oil/gas operators in the Middle East and exposure to Contracts Management from start till award and post award, establishing new ventues in drilling, engineering and related fields, & procurement.i
Previously employed to Rusal (Guyana) as a Planning Manager
Exploration Geologist with 10 years of diversified experience
Professional Geoscientist with 7 years international field experience in mineral exploration. Setup, hiring, training of field teams of local geologists. Archean lode Au, umf-hosted Ni-sulfide, porphyry Au-Cu and gemstones. Dutch Guyana, Madagascar, Tajikistan, Uganda, Mongolia, Canada, Mexico.
Professional Mining Engineer (CEng MIMMM) searching for senior level position in a open pit mining project in FSU
Over 11 years of SAP BW BI experience as a developer, Lead and Manager
Successful track record for planning, organization, leadership and project completion Accurate record keeping and scheduling skills regarding personnel and maintenance Ability to develop and establish operational and administrative policies Excellent computer skills
M.B.A. and Licensed Professional Mining Engineer with record of success in operations and engineering management. Creative problem solver with ability to develop real economic profits, lead during change management and create business strategies.
looking for mines manager job as i am second class mine manager certificate holder from directorate general of mines safety under India mmr 1961. and having nine years of experience in different minerals as a mines manager asst. manager.
1   2   3   4   5   6   7   [ 8 ]   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25  
Seach Parameters

Change search parameters...
CATEGORIES: Management;
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com