Resume - To maintain high levels of on-site safety awareness through the delivery of effe...

Misco Jobs

Resume #82194

CONTACT INFORMATION:
View contact information...

Introduction
A keen HSE professional, OHSAS 18001 & ISO 14001 EMS Lead Auditor, holder of NEBOSH International General Certificate, OSHA Construction Safety Training with Mechanical Engineering background.
The experience profile ranges from: Ensuring internationally accepted best HSE practices across Petro chemical, Process Plants, Pipe lines, Construction Industry, Oil & Gas EPC Projects. Keen to learn from the mistakes and eager to enhance company's HSE profile by adding value in advising the top management fearlessly regarding the good and bad practices in the field of HSE and address the behavior based issues in a matured & humanistic approach. Keen to share my work experience with a reputed best practices company and enhance my knowledge base and participate in the organization's HSE movement to raise HSE performance to next higher level.

Carrier Objective
Seeking an exemplary position that is highly adaptable to the environment, highly inquisitive and resourceful and eager to face challenges. Suitable position in Safety Management such as Safety Coordinator / Engineer / Auditor or similar positions in Petrochemical Construction & Processing, Oil & Gas (Refinery, Gas Plants, Storage tanks, Pipe Line) at Offshore as well as Onshore facilities.

Key skills
To plan, establish & implement, BS: OHSAS 18001:2007 & ISO 14001 audits.
To maintain high levels of on-site safety awareness through the delivery of effective educational & training programmes
To provide a comprehensive on-site HSE administrative support system
To help maintain effective working relations between the Company, its clients and its sub-contractors
To maintain a safe on-site working environment through the proactive enforcement of safety regulations
To investigate breaches of safety regulations and produce appropriate reports as required by the Company and client.

Career Overview:
A total of ten plus years work experiences in the field of Environmental, Health & Safety position in Oil and Gas, chemical process industries handling all related activities such as Implementation of Safe Work Procedures, Permit to Work Systems, Imparting Safety Training, Installation of Chemical plants and related equipment & commissioning, Hazardous Chemical handling – covering all related scope of works and three years work exposure in Civil construction projects, High-rise buildings, Piping, - covering all related scope of works.

PROFESSIONAL QUALIFICATION:
NEBOSH International General Certificate in Occupational Health and Safety
Lead Auditor BS OHSAS 18001:2007 & ISO 14001 EMS (Bureau Veritas)
Diploma in mechanical Engineering Sembawang Institute of Technology, Singapore.
Diploma in Industrial Safety, All India Institute of Management Studies ( AIIMAS)
Certificate in Fire Prevention and Fire Fighting (offshore), DGS, Govt. of India.
Personal Safety & Social Responsibilities (PSSR), DGS, Govt. of India
Personal Survival Techniques (PST), DGS, Govt. of India
IT Power for Office Management, National Computer Board, Singapore.
Bachelor of Science in Environment (on going) PM University, India.

TRAININGS PASSED / PARTICIPATED
OSHA – Occupational Safety and health Training Course, U.S. Department of Labor
First Aid – CPR -Red Crescent Society of Kuwait & St. John Ambulance Association of India.
Radiology Safety, 5M International Management and Training, Kuwait
Confined Space Safety Training – KN & Human safety Training Institute, Kuwait
Train the Trainer - Foster Wheeler Energy Ltd, KSA

EMPLOYMENT HISTORY

KHARAFINATIONAL W.L.L, PO BOX: 24081, SAFAT, 13101, KUWAIT
PERIOD: July 2007 – Present, DESIGNATION: HSE ENGINEER
CLIENT: EQUATE Petrochemical Co., PROJECT: Ethylene Glycol-2 Project, Kuwait
Carryout the risk assessment of the site activities, conducting HSE inspections, conducting the HSE meetings at the site, participating client's HSE meetings, co-coordinating with client's HSE department, conducting accident/incident/near misses investigation and reporting the cause and remedial measures, planning and conducting internal HSE audit, conducting sub-contractor's HSE audit, conducting periodical inspection on vehicles, equipment, machinery, tools & tackles, fire fighting facilities, excavations, scaffoldings, lifts, hoists & cranes etc, with relevant checklists and maintaining the relevant registers, conducting HSE induction training for all new employees, conducting in-house HSE training programs, conducting emergency mock drills, ensuring site safety instructions are strictly followed.

MOHAMAD AL MOJIL INTL. (MMG), PO BOX: 11, DAMMAM-31411, K.S.A
PERIOD: June 2006 – June 2007, DESIGNATION: SAFETY OFFICER
CLIENT: SABIC, SHARK PROJECT -Jubail (Foster Wheeler Energy Ltd.)
Implementation of HSE Program. Dealing with contractors and meeting to client safety requirements. Conducting custom designed training programs to contractor labor, Supervisory staff and engineering wing. Preparation of Risk Assessments. Inspects machines, equipment and its working condition in the construction site to ensure compliance with client's safety regulations. Carryout accident/incident investigations and prepare reports with proposals for remedial actions.

JAY CONSTRUCTION LTD., ADAYAR, CHENNAI, INDIA.
PERIOD: May 2004 - May 2006 DESIGNATION: HSE SUPERVISOR
PROJECT; Facilities Modernization Project, Chennai.
Carryout site visits and provide proactive advice & guidance on all matters pertaining to Health, Safety and Environmental protection. Carryout incident investigations and prepare reports with proposals for remedial actions. Review all HSE related documentation, including method statement, work permit procedures, to ensure compliance with established standards. Identifying the hazards on the construction site & highlighting the same in safety meetings to prevent accidents. Identify, evaluate & implement risk control measures

SAUDI OGER LTD. PO BOX: 1449, RIYAD, K.S.A.
PERIOD: June 2001 - June 2003 DESIGNATION: SAFETY INSPECTOR
CLIENT: SABIC PROJECT: HADEED IV th Expansion Project, Jubail.
Identify and eliminate unsafe acts / condition in the construction site. Supervising equipment erection to the highest safety standards. Conducting Site safety audits & Safety Training Programmes. Preparation of Emergency Evacuation Procedures. Carryout incident investigations and prepare reports with proposals for remedial actions

KOK TONG CONSTRUCTION LTD. 5, DEFU LANE, SINGAPORE
PERIOD: Mar. 1999 - Mar. 2001 DESIGNATION: FIRE AND SAFETY OFFICER
CLIENT: Toyo engineering corporation: Ensure implementation of defined, measurable HSE targets. Compliance with work permits procedure and eliminating inherent hazards. Inspects specified areas for fire prevention and firefighting equipment.

SAHARA INDIA LTD., CHENNAI, INDIA.
PERIOD: Jan.1996 -Feb.1999 DESIGNATION: Jr. SAFETY OFFICER
PROJECT: Power and water utility project.
Examines plans and specifications for construction to ascertain if all safety precautions have been included. Observe workers to determine use of prescribed PPE. Compliance with work permits procedure and eliminating inherent hazards. Inspecting & color coding tools and equipments. Participate in emergency drills.

MEMBERSHIP OF PROFESSIONAL ORGANIZATION.
Technician member of Institute of Occupational Safety and health (Tech IOSH)
Associate member of International Institute of Risk and safety management of UK (AIIRSM)
International member - American Society of Safety Engineers. (ASSE)
Member - Philippine Society of Safety Engineers. Middle East Chapter
Member – Safety Council of India.

TECHNICAL MEETS / SEMINARS PARTICIPATED
Construction Safety Management & fall Protection, Philippine Society of Safety Engineers
Construction Safety Course, Building and Construction Authority, Singapore
Safety Leadership Training, 5M International Management and Training, Kuwait
Train the trainer, Foster Wheeler Energy Ltd., KSA,
Behavior Based Safety, (BBS) EQUATE Petrochemical co., Kuwait.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 1267)

Go to Search Parameters...

Brief Description

Totally 17.6 years of experience of which 15 years in Retail Trade and 2.6 years in Wholesale Trade in Diversified Fields

Bachelor of mechanical engineering working as rotating equipment engineer for condition monitoring and predictive maintenance using vibration analysis, ODS, alignment, lube oil analysis, Thermal imaging (Thermography), videoscope, operating parameters

Dual Post Graduate Mechanical Engineer with 10 years of experience

Graduate with a 3 year Bcom Degree in Finance from University of South Africa.

Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor

I am used to working independantly aswell as part of a team in remote areas in Africa, i am able to communicate in French and have done health and safety training with NOSA cources include SAMTRAC an ASHEPP

I would like to express my interest in an entry level position in your Company. I completed M.Sc in Applied Geology from Jadavpur University in 2006 and now I completed my M.Tech in Mineral Exploration from Indian School of Mines University, Dhanbad and obtained first rank in M.Tech Mineral Exp

Business Process Modeling • Process optimization • Project management • Lean Six Sigma • Predictive and Simulation modeling • Manufacturing reengineering • Data analysis • Metrics development and reporting • Organizational development • Sales effectiveness • Supply Chain Management • Patent engineer

Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering.

General manager of Services Company / QHSE and Management systems Oil and Gas sectors

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

I rely on over 14-year experience in Instrumentation & Control Engineering in FEED & Detailed Design Engineering, Construction, Supervising, QA/QC, Commissioning, Testing and Maintenance of Oil & Gas (Offshore, Onshore), Refining, Petrochemical and other major projects.

30+ yrs experience in the Oil, Gas, and Construction industries (within Onshore, Offshore and Overseas and in Senior Management & Shop-floor positions upon a Contract), and fluency in French, Portuguese and Spanish.

Free! Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member,

Field/Kind/Skill: Accounting, Financ Statement, Tax, Information Manufacture System; Microsoft Word, Excel, Power Point, Access:Visio, Adobe Photoshop, Web Design, SPSS; SAP Business One, Daceasy Accounting & Payroll: Internet

I am qualified to work as an analyst, appraiser or consultant. Would welcome assignments in operations research, finance, market research, data processing and related areas.

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

My technical specialty lies in installation, troubleshooting and repairing Electrical, Mechanical, Automation production problems. I can install conduit, cable tray, main panels, and sub-panels, distribution transformers, ground systems and, wide variety electro-mechanical devices

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

I have eight solid years of experience in various Production Operations positions in Shell Gabon. the positions that I have held required leadership skills, excellent team working spirit and good communication skills which I firmly believe to be most valuable attributes.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

Highly organized and innovative Manager with an exceptional track record of cost minimization through creative procurement approaches and proactive management style focused on building trust and improving departmental teamwork in fast paced union environments.

I'm over 5 years experience in multinational and overseas company. Have strength in knowledge and leadership. I'm always give the best and reach the best in every role that I walk with.

Business Administrator with MBA from Oxford, UK

PLANNER SMELTER

analyst

Research and Development Metallurgist . Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis

Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

15 plus years experience in tool and equipment management, warehousing, materials management. Dependable, reliable and honest. Looking for long term employment.

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

7 years engineering and management experience in the oil and gas industry. PMP certified with extensive civil engineering experience.

SAP FICO consultant with 10 years experience

Graduated in the field of Mechanical Engineering and presently working with one of ADNOC Group of companies as a Maintenance Planner / Scheduler (Mechanical). Have been associated with Oil & Gas sector for more than 4 years. Work experience on CMMS and Primavera skills.

To maintain high levels of on-site safety awareness through the delivery of effective educational & training programmes, To provide a comprehensive on-site HSE administrative support system,To help maintain effective working relTo plan, establish & implement, BS: OHSAS 18001:2007 & ISO 14001 audits.

A senior cost & controls engineer with extensive experience and a professional qualification in Mechanical Engineering coupled with a strong background in project management,project controls, contracts administration,variation orders &claims management.International experience in large EPIC projects

Seeking Chemist or Laboratory Technician Position-will relocate

Plant operations supervisor / trainer, remote overseas locations

25 yrs Heavy diesel mechanic in Construction and Pipeline

Can handle all operations of a mine surface or underground. See resume for additional experience and qualifications.

Finance*Strategy*Management*Sales*Contracts*Financial Services*International/Global Trade

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Geologist with background experience in Mining and Exploration of mineral resources- gold and base metals. QAQC for sampling projects. Ability to prepare technical Exploration reports for Project Managers incl drilling proposals.MapInfo, Micro-Mine, Vulcan, MP3, MS-packages.Ore reserve calculation

I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out