Resume - Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and...

Misco Jobs

Resume #83892

CONTACT INFORMATION:
View contact information...

PhD (Mech.) CQE-ASQ, P.Eng.

Mechanical Design Engineer – Rotating Equipment

Allow me to take this opportunity to introduce myself as a "Mechanical Design Engineer –Rotating Equipment" with verifiable track records.

I have extensive experience in rotating equipment- pumps, compressors, motors, diesel engines, and offshore loading facilities, piping and pipeline systems, mechanical packages,designed and developed 150 M3/h centrifugal pumps, which reduced the operating cost by more than 20%. The test result was published in international reputable journals and conference proceedings. I have solved the performance dispute of motor-pump of Kumara Corporation with their clients, reviewed the design of the coolant pump of OE600A reciprocating engine and suggested the required modifications of coolant pump testing facilities, developed the testing procedures. I have hands on experience in designing, developing, testing & selection of pumps in various applications including API 610 pumps within EPCM environment.

I worked as a technical expert in different EPC Oil & Gas processing projects, involved with all phases of the EPC project, including pre-feasibility study, review of design concepts, Front End Engineering Design (FEED) & detail design, procurement, construction & commissioning documentation, & Field Inspections. I am experienced in managing the design and development department of Steel and Engineering Corporation and managed about 10 engineers focusing the designing, developing and testing of pumps, marine propulsion, diesel engines and their components.

My solid oral and written communication skills have been demonstrated through my lecturing in multicultural classroom environments and presenting several research papers at international seminars. In addition, I would like to mention that I am a member of the Association of Professional Engineers Ontario, Canada and American Society for Quality, ASQ.

As such, I believe that my verifiable track records of experience in rotating equipment, their reliability analysis, communication and leadership skill would enable me to be an ideal candidate for the position of "Mechanical Design Engineer – Rotating Equipment", thereby greatly contributing to its organizational goals and objectives.

I would greatly appreciate the opportunity to discuss my credentials with you in a personal interview for further evaluation, since an employment opportunity would be mutually beneficial. I am a Canadian Citizen and willing to relocate myself for a prospective opportunity.

Yours Sincerely,

Abul Hossain, PhD (Mech.) CQE, P.Eng.
PGD Diploma, QA and Manufacturing Management

OBJECTIVE

Mechanical Design Engineer – Rotating Equipment

HIGHLIGHTS
* Over 15 years of hands-on experience in rotating equipment in large industrial settings such as oil and gas; gas gathering centers, refinery, crude oil export, LPG & LNG projects, steel and engineering, shipbuilding, construction, aerospace, and automotive industries: provided expert advise and assistance to design, construction, selection of equipment, troubleshooting, projects and maintenance personnel to rotating equipment.
* Preparing/approving drawings and specifications, P&ID's, equipment data sheets, material requisitions, technical bid evaluations, and vendor technical submittals, data and drawings, ITPs, field checking, verification, site inspection and data gathering.
* Providing engineering support as PMC roles for improving equipment reliability in the Oil & Gas Industry with international Consultancy Company, EPC contractor and end user, in the field of rotating equipment selection, application, design/engineering and start-up of Oil & Gas processing facilities including LNG construction project, designed and developed 150 M3/h centrifugal pumps, which reduced the operating cost by more than 20%.
* Experienced in Canaport LNG construction project, reviewing FEED & detailed engineering documents, Installation and Commissioning procedures, preparing Field Inspection Reports of final assembly, pre-commissioning and commissioning activities for Fire Water Diesel and Electric Driven pumps, Air Compressors, SCV's blower, BOG Compressors, LP & HP Cryogenic Pumps.
* Fully conversant with pump design and performance characteristics as per API 610, API 674 & API 682, conducted pump performance testing, interpret results and advice corrective measures and design change,
* Taught undergraduate and advanced courses on rotating equipment; such as Thermodynamics, Fluid Machinery, Internal Combustion engines, Quality assurance & Reliability Engineering.
* Good understanding of CBM, and Reliability Centered Maintenance (RCM) techniques, analyzing the equipment failures, predicting the service life of the equipment, and developing the maintenance philosophies and procedures, performed critical assessments when there are unexpected failures and develop resolutions to improve declining equipment conditions.
* Prepared and issued engineering purchase requisitions, managed and prepared bills of material, coordinated with Manufacturing, Planning, and Procurement and Quality departments to ensure overall product quality, technical specification and manage scope changes, reviewed and analyzed safety procedure, prepared testing and calibration manuals for diesel engines, pumps and motors.
* Experienced in HVAC project management, developing district cooling systems (DCS) worked as a DCS project consultant: prepared and reviewed design concepts and feasibility study reports, detail design- pipeline, motors, pumps, steam generators, chiller, heat exchangers, construction documentation, and provided professional advice and guidance to suppliers.
* Proficient in MS office, AutoCAD, SPC, Quality Management, and ISO 9001, proven leadership and communication skills, ability to work effectively in a project team environment.
Relevant Skills and Experience

2008 – Current Senior Principal Rotating Equipment Engineer
Foster Wheeler USA Corporation, On Site Canaport LNG, Saint John, Canada

* Providing expertise related to the rotating equipment: pumps, compressors, gas turbines, generators, diesel engines, Fire Water Diesel and Electric Driven pumps, Air Compressors, SCV's Blower, BOG Compressors, LP & HP Cryogenic Pumps, and offshore marine unloading arms.
* Preparing field inspection reports, reviewing ITPs, pre-commissioning & commissioning procedures, supervising other PMC activities specific to the rotating equipment technical area such as; Equipment Testing, Technical support to Construction sites, On-site surveys and data collection.
* Providing inputs in using risk review methods, SIL, HAZOP studies and other safety checks in order to maintain and improve area safety and reliability performance indicators; providing direction to junior staff and working effectively in a multi-national, multi-disciplinary environment.
2005 – 08 Senior Mechanical Design Engineer – Rotating Equipment, AMEC- Kuwait Oil Company

* Worked as a Senior Mechanical Design Engineer in AMEC-Kuwait Oil Company; prepared, reviewed all design specifications, data sheets, material requisitions, and design calculations, technical bid evaluations, purchase requisitions and Vendor documentation.
* Prepared/reviewed the modeling of series, parallel and series/parallel pump arrangement of firewater pumps for the GC-24 project of Kuwait Oil Company and also worked with P&IDs, Control Mechanisms; PCV, VFD, VSD and VSD by pass modes.

2002 - 05 Senior Mechanical Design Engineer, Engine Development,
Orenda Recip Inc., Magellan Aerospace Corporation, Canada

* Reviewed the design of the coolant pump of OE600A reciprocating engine and suggested the required modifications of the engine coolant pump testing facilities and developed the testing procedures
* Prepared operation instructions and drawing for reworking parts, determined the cylinder head flow rate and compared flow rate with the modified cylinder head
* Worked as a key team member to implement the statistical methods and quality assurance program, conducted the training program on ISO9000:2000, Manufacturing Processes, Statistical Process Control, Reliability Engineering and Product Safety.
* Worked with other related departments to carry out the engineering and quality procedure changes, monitored the quality of in-coming and out-going materials, and worked with external suppliers, reviewed the final performance test reports of gas turbines.

1998-02 Project Engineer, University Putra Malaysia

* Worked with KJ Engineering Sdn. Bhd. as a consultant to design a District Cooling Project for the new engineering complex building, University Putra Malaysia, UPM (about 1185 RT involving a direct chiller and thermal energy storage. The annual saving from the implementation of the project is RM 930, 667 (C$423,000) with IRR 17.4%)

* Supervised the research to convert Diesel to CNG-fueled spark ignition engine, solved the performance dispute of motor-pump of Kumara Corporation with their clients, and consultancy to palm oil and automotive industries.

1995- 98 Project Engineer, Bogra Petro-chemical industry, BSEC

* Evaluated the feasibility studies reports, and tender documentation, prepared capital project plans & budget concerning mechanical equipment; pipelines, compressors, instrumentation, and rotating equipment.
* Prepared bidding documents for equipment & materials & for construction contracts to bids evaluation committee & contracts committee, supervised the engineering support services required to carry out maintenance & construction projects including design, drafting, recommended suitable contractors, ordering, tracking.
* Assigned manpower, materials, and equipment to maximize efficiency, maintained schedules, resolved various problems such as changes in scope, slippage of schedules, and budget overruns.
* Monitored and verified documents submittals, drawings Follow-up with project schedule, status of delivery and communicate with factories and customer accordingly.
* Presented regular formal reports and/or as needed; kept Project Manager and senior management informed and current at all times.

1993 - 95 Senior Mechanical Design Engineer, Gazipur LP Gas Ltd., BSEC
* Provided input in engineering designs and drawings, worked closely with the CNG engine development project, provided technical interpretation, and prepared tender documentation, experienced in planning, budgeting, assessed the equipment selection.
* Provided technical advice & supervision for personnel working on construction & maintenance projects including checking contract work to ensure compliance with specifications, engineering standards.
* Evaluated vendor's quality management system and reviewed together with engineers and made appropriate recommendations to endorse contractors' quality system during bid evaluation
* Prepared the quality audit program for project contractors and suppliers and reviewed their quality management systems.

1988 – 93 Mechanical Design Engineer, Diesel Engine Manufacturing Plant, BSEC

* Experienced in developing design concepts, estimating, and producing prototype parts in machine shop, supervised tests and analyzed the engine/pump performance, organized training programs for engineers and technologist, worked in safety committee
* Prepared/approved designs and drawings, supplier manual, designed/developed pumps, gearbox, and Diesel engine components, coordinated the design and installation and performance testing of DEUTZ diesel engines
* Designed and developed engine parts, gearbox, pumps, marine propulsion units, designed and developed 150 M3 /h capacity pump which reduced operating cost by more than 15%

ACADEMIC QUALIFICATIONS

* PhD, Mechanical Engineering
Astrakhan State Technical University, Astrakhan

* Post Graduate Diploma - Quality Assurance-Manufacturing and Management
Sheridan Institute of Technology and Advanced Learning, Canada

HONOURS, AWARDS AND DISTINCTIONS
* Letter of appreciation for the contribution in ISO 9001 implementation, UPM
* Undergraduate & post graduate scholarships for studying in then USSR
* Best Student Awards, Astrakhan State Technical University (5 Consecutive Awards)
* B. Eng. and M. Eng. with Honours (Obtained the highest grade in all Subjects)

PROFESSIONAL MEMBERSHIPS

* Member, Association of Professional Engineers, Ontario, PEO
* Member, American Society of Mechanical Engineers, ASME
* Fellow, International Energy Foundation, IEF
* Member, Standardization Committee, Leningrad Testing and Experimental Institute
* Member, American Society for Quality, ASQ

ADDITIONAL TRAINING

2004 Seminar, Heat Engine: It keeps On Getting Better, Organized by PEO,
Mississauga, Ontario, Canada
2001 Seminar, Passenger Car: The Engine Development Process, FEV Motorentechnik
1999 Training, ISO 9001 Internal Quality Audits, University Putra Malaysia
1993 Training, Production Management Information Systems, AOTS, Tokyo, Japan
1992 Training, Conversion of Natural Gas Vehicles, BUET & LFMG, New Zealand

SAMPLE WORKS/PROJECT EXPERIENCE

* "Design and Performance Analysis of 150 M3/h Centrifugal Pump Coupled with DEUTZ Diesel Engine F1L 210D", Journal of the Institution of Engineers, IEB, Vol. 20, no.1-2, 1997

* "Performance and Emission Characteristics of a Compressed Natural Gas Fuelled Spark Ignition Engine", International Journal of Energy, Vol. 2, No. 1, 2002

* "Clean and Renewable Power Generation Potential from Palm Oil Biomass" Energex 2000: Proceedings of the 8th International Energy Forum, Las Vegas July, 23-28, 2000

* "Concurrent Engineering and Product Design and Development, Prentice Hall, 2001"

* "Feasibility Study of a District Cooling System with Thermal Energy Storage: A Case Study" Journal of Energy & Environment, Vol. 2, September 2003.

* Presented the paper on, "Reliability and Product Safety", organized by Aircraft Maintenance Engineers' Association, Mississauga, Canada, March 2007.

* "Application of Condition Based Maintenance for Diesel Engines", Journal of IEM, Vol. 62, No.1, 2002

* Technical Report on " Run Test Failure Analysis of Fire Water Pumps on site Canaport Liquidified Natural Gas, Saint John", June 2009.

REFERENCES Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 1268)

Go to Search Parameters...

Brief Description

Master of Science in Geology and MBA from a leading Australian Business School. Having 25 yrs experience in mining industry in exploration, mining geology, financial analysis, consultancy and feasibilty reports and financial studies

Strong engineering management and design background with a broad range of skills including: construction management, process plant design, subcontractors management, mechanical equipment specifications, project controls, material handling design including barge loading and unloading, AutoCAD

17+ years Experience of Supply Chain (Materials Planning, Purchasing & Inventory Management). Track record in statistical base forecasting, scheduling, presentations, negotiations and software based Purchase & inventory control, warehousing management and team leadership. Highly organized, analytica

20+ years of experience working in Materials Management, Inventory Control, Materials Planning Scheduling & Logistics, in both home office and field site locations on the construction of large petrochemical plants, natural gas plants, electrical power plants, and mining facilities.

Security, Administration, Logistics

Open Pit Slope Design, Tailings Dams, Plant Foundation Investigations, Earthworks

Mine Planning & Pit Designing by DATAMINE and its implementation in the field for all mines of the company.

Diploma in Mining Engg, AMIE Sec A&B in Mining Engg from IEI.

Mine Manager, diamond mine. Work in Angola for 6 years, Excellent knowledge of Pans, DMS, Xray machines, Screens, Crushers, Flotation (Zn, Pb, Cu,Platinum), Spirals, Nelson concentrators, Spreak/read/write English, Afrikaans, Fanakalo,Portuguese

Experience, professionalism, skills, physically fit, able to work long hours in tough environment and stressful conditions, availability for traveling abroad.

Mining engineer and experienced manager with over 20 years of successful executive management, project development, engineering, construction and operations experience in the mining, tunneling, fossil power, rail and heavy construction sectors.

Procurement, Supply Chain and Contracts Professional

Construction Management professional with Heavy Industry ,Power, Energy, Mining sector experience

LARGE AND STRATEGIC PROJECTS MANAGEMENT - BUSINESS AND OPERATIONS MANAGEMENT

Senior mining professional with global risk management experience identifying and managing risk in mining operations and related construction projects

I am a geologist with multidisciplinary experience, including experience in geotechnical engineering, mining, exploration, tunneling, groundwater, drilling, environmental and construction monitoring. I am a licensed monitor well driller in Nevada and OSHA Hazwoper, MSHA, SWPPP and nuclear gauge cert

Gold Mine Mill Foreman

Motivated, proven performer with a 17 year record of demonstrated success in Operations Management, Project Management, Distribution/Logistics Management, and Mechanical Engineering across multiple fields from Military Operations, Municipal Management, Telecommunications, Software Development, Call

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

Professional Sales Person with a sound Technical background. “Hands On” approach. A proven track record of strategic business planning, financial & corporate leadership experience conceptualizing ideas, seizing opportunities, building operations, leading highly successful new business development in

Im looking for mechanical maintenance Engineer position/maintenance planner.

Enviromental Geological Engineer and Regulatory Affairs Manager

15 years heavy equipment operation and maintenance

Qualifield Metallurgical Graduate with technical experience of VDC casting in aluminium industry

A results orientated can-doer; outstanding leader and team worker; driver and manager of change; excellent commercial acumen; highly experienced in resource sector business improvement and commercial project / supply chain management roles; MBA with Merit (Newcastle NSW). Experienced expatriate.

Over thirty years of combined engineering and construction management experience involving supervision, design, contracting and construction, pre-award and post-award contract administration, change order and claim management, CPM Pert scheduling, cost, estimating, procurement and logistics of large

Safety Professional, 30 years experience construction, minin, environmental and hazmat

I am a highly motivated person who is incredibly conscientious and hard working with an incredible ability to get the job done in adverse conditions and time restraints. The majority of my experience has been working on all types of heavy earthmoving equipment in a vastly changing mining environment

Presently connected in an Australian firm conducting mineral exploration in the Philippines. I am a license Geologist and have been practicing the profession for more than 4 years. I was involved in Ni-Lat deposits and shifted to a more complicated and challenging tasks of Au/Cu-Au explorations.

Environmental Specialist and Project Manager, with over 18 years of experience in the Infrastructure developkent projects.

Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience

Global Sourcing, Program Management & operations management specialist with over 16 years of experience with ITES Consulting (4 years plus) & manufacturing industries (12 years. Contributed to improve profitability of various business organizations through “Spend Management” & “Supplier Relationship

Seeking Middle Level Managerial assignments in Business Development / Channel Management / Sales & Marketing with a FMCG, Automobile, Beverages oriented organization PROFESSIONAL SYNOPSIS A dynamic professional with over 4 years of rich experience in Sales & Marketing, Business Development, Chann

10.5+ years experience EDP /ERP /IT Manager VB+SQL+ORACLE+FOXPRO

Ore Handling Plant Superintendent (Alternate Project Manager); Electrical Maintenance

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 4 years experience in mining; excellent project management, report writing, schedulling, planning and prioritising skills; capacity for implementing, managing and maintaining environmental management systems (ISO 14001) including internal auditing; great commmunicator and trainer.

20 Years experience within Surface Coal Mining - Proven competence in mine management. (NVQ Level 4) - Control of blasting operations (Explosive Supervisor) - Mine Planning and design - Twelve years experience as mine engineer - HNC Civil Engineering

Bio-Medical Engineering, B.E.S., M.Sc., (Bio-Medical)

Competent and adept geologist with mine planning experience

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Administration and Management.

P.E. Electrical with 20+ vears, Specilize in power distribution and electrical maintenance for mining and heavy industrial equipment

resume jul09

Project, Project manager, maintenance, maintenance manager, production, production manager, mining, heavy equipment

Controls Engineer, ControlLogix, Manufacturing Engineer, Engineering Manager, PLC Programming, Robotics, Machine Vision

Fleet Manager/Safety Officer 15 years experience. Certified Journeyman Heavy Duty Repairmen/Welder 22 years experience.

Environmental Management & Permitting/Mining - Oil & Gas - Power - Infrastructure - Construction/Domestic (USA) & International

Maintenance Manager with BSEE degree & current MSHA electrical cards with hands-on experience in all aspects of mechanical, electrical, and hydraulic systems.

27 years experience primarily in oil & gas EPC/EPCM Project controls, Contracts, project management and engineering.

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out