Resume - Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects...

Misco Jobs

Resume #85721

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCES

Name of Company / Country: United Company For Inspection & Quality (UNICO)
Al Khobar, Saudi Arabia
Position Held: Electrical/Instrumentation Engineer Personnel supply to SA ARAMCO (Oil & Gas) & SABIC (Petrochemical)projects
Date Joined – UNICO: May 20, 2008 -May 22, 2009
Responsibilities/Duties

: Familiar with International Standards like NFPA70 NEC, IEC, NETA, NEMA, IEEE
- Preparation of inspection reports, testing & implementation, work accomplishment reports, issuance of procedures
- Involvement in the preparation of project quality plan, inspection test plans, special work procedures, check list and reports etc., in coordination with the QA/QC team.
- To inspect the Electrical Equipment to be used and installed as per client Inspection Test Plan (ITP), specification and quality manual.
- Attended weekly projects progress meeting, Inspection Quality Activities.
- Review and verify drawings/details as per Scope of work including Single line diagrams.
- Surveying of installation-supports, conduits piping works.
- Surveying installations and reports preparation in prior to the pre-commissioning.
- Raising of R.F.I (Request for Inspection) prior to all related Electrical work & submitting to QA/QC manager.
- Make material inspection report after receiving inspection is completed.
- Conduct surveillance site monitoring to assure that the electrical activities are based on company standards before final inspection.
- Support and assist the client during testing and commissioning of the equipment/system.
- Control and update drawings, specification, submittals received and approved by the client for construction site copy/Issued for Construction.
- Coordinate and attends weekly progress meeting together with the client and sub-contractors representatives.
- Prepare daily, weekly, monthly, progress report.
- Grounding grid installation inspection
- Cable on drum meggering inspection.
- Cable trench installation inspection.
- Cable laying on trench inspection.
- Conduit installation inspection.
- Electrical Installation in classified locations inspection.
- Electrical cables termination inspection.
- Testing of all protective devices like Relays, CT's etc.,
- Preparing NCR's & submitting to QC supervisor/Manager.
- As a Inspector, Maintain a record of Pro-active Violation & Violation after the facts of all sites activities
Projects Assignment
(From Recent) 1 Global Sources
Project: SAUDI ARAMCO Khurais Industrial Support Complex
Position: E & I QC Inspector
March 24, 2009 – April 25, 2009

2 Development Equipment Materials Technology Establishment (DEMTE)
Project: SAUDI ARAMCO AINDAR GOSP-3 (Gas Oil Separation Plant)
Waste Water System Upgrade Project
Position: E & I Engineer / QC Inspector
Dec 2008 – March 20, 2009

3 Sinopec International Petroleum Services Incorporated (SIPSC)
Project: Yanbu National Petrochemical Company (YANSAB Olefin)
Position: QC Electrical Inspector
July 2008 – Nov 2008

Name of Company / Country: US Distribution Asia Inc. for Reelcraft USA
Position Held: Technical Service Engineer
Period (From – To): Aug 15, 2004 – May 15, 2008

Responsibilities/Duties

:Trained in Reelcraft HQ Indiana USA with Engineering department for product technical specifications and special applications.
Improved technical communications between Asia Pacific clients and Reelcraft engineering department for special applications requirements. Communicate and travel abroad in Asia Pacific countries including Singapore to do technical service support to Reelcraft USA distributors. In mobile office, meeting distributors, engineers, directors, owners for technical application support with Reelcraft products.

Name of Company / Country: SECA Computer Shop Angeles City
Position Held: Desktop Support / IT
Period (From – To): Jun 18, 2001 – May 18, 2008
Responsibilities/Duties: Assemble new desktop unit. Setup & maintain, upgrade HARDWARE/ SOFTWARE and LAN and Internet Network setting requirement.
Troubleshoot / repair hardware or software problem on each desktop or PC unit for a walk –in or on-call service to customer.
Knowledge on DNS, IP, local router on Internet & email setting, applications, upgrading, downloading, etc.

Name of Company / Country: Lite-On & Kyushu Matsushita Industries Phil.Inc.
Position Held: Facilities & Maintenance Engineer
Period (From – To): May 25, 1999 – Jun 25, 2000
Responsibilities/Duties
: Joined training for ISO 9000. Training on ISO Internal Quality Auditing IQA. ISO Procedural Training Understanding, Documenting, Implementing, & Maintaining an ISO 9000 Quality System.
Performed and Improved Efficiency of scheduled maintenance for facilities and Clean Room equipments and instruments.
Power Cost Savings as a result of Improved maintenance schedule.
Represent L&K for plant inspection schedule of government agencies such as building officials.

Name of Company / Country: EXPO PILIPINO Corp.
Position Held: Electrical Supervisor
Period (From – To): May 25, 1998 – May 22, 1999
Responsibilities/Duties
: Acting as Duty Officer (Engineering & Maintenance Head) on scheduled basis.
Direct supervision on electrical projects installation and maintenance schedule on electrical power system of the EX PO Theme Park.
Owner's representative to witnessed Quality Control inspection of electrical system project.

Name of Company / Country: HSIN TUNG YANG CO. LTD, TAIWAN ROC
Position Held: Engineering & Maintenance Staff
Period (From – To): Aug 2, 1994 – Jul 31, 1996
Responsibilities/Duties
:
In an ISO 9001 Certified Company, Diagnosed, Repair & maintenance of electro-pneumatic, electro-mechanical, electro-hydraulic, pneumatic machines used in production area including food conveying systems and central air conditioning and refrigeration system of the factory.
Installation of new measuring and monitoring instruments such as pressure meters, volt / ammeters. Operation & maintenance of electrical power system.
Technical report and English operating manual/procedure writing for specific production equipment being used.

Name of Company / Country: AVANTEX MILL CORP.
Position Held: Electrical Plant Services
Period (From – To): Jun 19, 1993 –Jul 25, 1994
Responsibilities/Duties
: Regular inspection monitoring, operation & maintenance of electrical power system from 69KV substation, 13.8KV switch gear, 440V, 220V & 110V systems of the plant.

Name of Company / Country: Soft Touch Needle Craft
Position Held: Electrician & Draftsman
Period (From – To): Apr 25, 1988 – Jan 15, 1991
Responsibilities/Duties
: Operation & maintenance of electrical power system

Educational Qualifications/ Achievements

- Bachelor of Science in Electrical Engineering Holy Angel University (Dean's List)
June 1986 - March 30, 1991
Degree / Diploma
- Jose Abad Santos High School (Science Scholar)
June 1982 - March 1986
- Candaba Central School (5th Honor SPED Class)
June 1976 – Apr 1982

Other Information

- Registered Electrical Engineer: PRC ID # 3079

- Certificate of Completion: Calibration for Process Instrumentation
Meralco Foundation Inc. Technical Institute (Mar 8 –Apr 19, 2008)

- Affiliation: Institute of Integrated Electrical Engineers of the Philippines, Inc.
(IIEE Life Member since August 2, 1996 )

RECENT TRAININGS:
- In-house UNICO training for Saudi ARAMCO & SABIC Project Quality Control Inspection Procedures and ISO 9001:2000 awareness training
- Calibration Of Process Instrumentation (March 8 – April 19, 2008)
- Reelcraft USA Product Technical Service training (22 Oct. – 6 Nov. 2007) Indiana USA
- Reelcraft Indiana USA HQ, SEMA & AAPEX show Las Vegas NV USA (29 Oct – 11 Nov 2005)
- Other training thru Continuing Professional Education

SKILLS:
Technical Service Support 5yrs, Industrial & Manufacturing Electrical / electronics experienced 8yrs, Computer Hardware & Software literacy 8yrs.

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 1267)

Go to Search Parameters...

Brief Description

Totally 17.6 years of experience of which 15 years in Retail Trade and 2.6 years in Wholesale Trade in Diversified Fields

Bachelor of mechanical engineering working as rotating equipment engineer for condition monitoring and predictive maintenance using vibration analysis, ODS, alignment, lube oil analysis, Thermal imaging (Thermography), videoscope, operating parameters

Dual Post Graduate Mechanical Engineer with 10 years of experience

Graduate with a 3 year Bcom Degree in Finance from University of South Africa.

Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor

I am used to working independantly aswell as part of a team in remote areas in Africa, i am able to communicate in French and have done health and safety training with NOSA cources include SAMTRAC an ASHEPP

I would like to express my interest in an entry level position in your Company. I completed M.Sc in Applied Geology from Jadavpur University in 2006 and now I completed my M.Tech in Mineral Exploration from Indian School of Mines University, Dhanbad and obtained first rank in M.Tech Mineral Exp

Business Process Modeling • Process optimization • Project management • Lean Six Sigma • Predictive and Simulation modeling • Manufacturing reengineering • Data analysis • Metrics development and reporting • Organizational development • Sales effectiveness • Supply Chain Management • Patent engineer

Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering.

General manager of Services Company / QHSE and Management systems Oil and Gas sectors

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

I rely on over 14-year experience in Instrumentation & Control Engineering in FEED & Detailed Design Engineering, Construction, Supervising, QA/QC, Commissioning, Testing and Maintenance of Oil & Gas (Offshore, Onshore), Refining, Petrochemical and other major projects.

30+ yrs experience in the Oil, Gas, and Construction industries (within Onshore, Offshore and Overseas and in Senior Management & Shop-floor positions upon a Contract), and fluency in French, Portuguese and Spanish.

Free! Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member,

Field/Kind/Skill: Accounting, Financ Statement, Tax, Information Manufacture System; Microsoft Word, Excel, Power Point, Access:Visio, Adobe Photoshop, Web Design, SPSS; SAP Business One, Daceasy Accounting & Payroll: Internet

I am qualified to work as an analyst, appraiser or consultant. Would welcome assignments in operations research, finance, market research, data processing and related areas.

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

My technical specialty lies in installation, troubleshooting and repairing Electrical, Mechanical, Automation production problems. I can install conduit, cable tray, main panels, and sub-panels, distribution transformers, ground systems and, wide variety electro-mechanical devices

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

I have eight solid years of experience in various Production Operations positions in Shell Gabon. the positions that I have held required leadership skills, excellent team working spirit and good communication skills which I firmly believe to be most valuable attributes.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

Highly organized and innovative Manager with an exceptional track record of cost minimization through creative procurement approaches and proactive management style focused on building trust and improving departmental teamwork in fast paced union environments.

I'm over 5 years experience in multinational and overseas company. Have strength in knowledge and leadership. I'm always give the best and reach the best in every role that I walk with.

Business Administrator with MBA from Oxford, UK

PLANNER SMELTER

analyst

Research and Development Metallurgist . Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis

Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

15 plus years experience in tool and equipment management, warehousing, materials management. Dependable, reliable and honest. Looking for long term employment.

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

7 years engineering and management experience in the oil and gas industry. PMP certified with extensive civil engineering experience.

SAP FICO consultant with 10 years experience

Graduated in the field of Mechanical Engineering and presently working with one of ADNOC Group of companies as a Maintenance Planner / Scheduler (Mechanical). Have been associated with Oil & Gas sector for more than 4 years. Work experience on CMMS and Primavera skills.

To maintain high levels of on-site safety awareness through the delivery of effective educational & training programmes, To provide a comprehensive on-site HSE administrative support system,To help maintain effective working relTo plan, establish & implement, BS: OHSAS 18001:2007 & ISO 14001 audits.

A senior cost & controls engineer with extensive experience and a professional qualification in Mechanical Engineering coupled with a strong background in project management,project controls, contracts administration,variation orders &claims management.International experience in large EPIC projects

Seeking Chemist or Laboratory Technician Position-will relocate

Plant operations supervisor / trainer, remote overseas locations

25 yrs Heavy diesel mechanic in Construction and Pipeline

Can handle all operations of a mine surface or underground. See resume for additional experience and qualifications.

Finance*Strategy*Management*Sales*Contracts*Financial Services*International/Global Trade

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Geologist with background experience in Mining and Exploration of mineral resources- gold and base metals. QAQC for sampling projects. Ability to prepare technical Exploration reports for Project Managers incl drilling proposals.MapInfo, Micro-Mine, Vulcan, MP3, MS-packages.Ore reserve calculation

I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out