Resume - Drilling professional for 20+ years; extensive international well construction s...

Misco Jobs

Resume #18240

CONTACT INFORMATION:
View contact information...

Experienced drilling engineer / manager with a record of success in the design and construction of complex wells.

Managed the construction of China's first horizontal, underbalanced, multilateral coal bed methane well. Successfully completed on time, within budget and with no LTA's.

An analytical and independent creative thinker with a record of providing innovative solutions from concept to completion.

Multi-skilled with technical, commercial and leadership experience in a diverse range of international locations.

CAREER DETAILS:
2004-Date: DRILLING PROJECT MANAGER: Asian American Coal Inc., China
* Design of horizontal multilateral underbalanced geosteered coal bed methane well:
-Evaluation of well functional requirements
-Analysis of offset vertical well data
-Identification of risks, hazards and preparation of contingencies
-Preparation of well plans, detailed procedures and time estimates
-Evaluation of hydraulics, torque/drag, casing requirements
-Specification and procurement of drilling and completion equipment
-Preparation of AFE
-Evaluation of proposals, negotiations with service providers, preparation of contracts

* On-site well construction supervision and management of multi-disciplinary team:
-Drilling
-Underbalance
-Geology
-Completion
-Production
-Contracts / Budget
-Materials / Logistics
-Local Liaison / Regulations
-Data Management and reporting

Responsible for team organisation, reporting structure, definition of roles and responsibilities, allocation of tasks.
Constant evaluation and analysis of drilling operations in order to achieve continuous improvement.
Supervision and monitoring of the performance of employees and contractors (drilling contractor, horizontal directional drillers, geosteering, special tools for shallow extended reach drilling).

* Special responsibility for on-site HSE management:
-HSE Pre-spud rig inspection; supervision of required remedial action
-Emergency response planning
-Introduction and coordination of Job Safety Analysis system
-Introduction and coordination of Hazard Observation System
-Preparation of Safety Awareness Posters
-Safety Meetings
-Specification of special safety regulations for underbalanced drilling
-Preparation of HSE daily report

*Post-well technical and commercial management:
-Supervision and preparation of operations reports
-Technical operations review; capture lessons learned
-Service Contractors payment negotiations

1998-2004: REGIONAL MULTILATERAL DRILLING MANAGER: Halliburton, Asia Pacific
* Technical and commercial management of multilateral well construction services
* Complex well planning
* Risk assessment and contingency planning
* Timing estimates
* Ordering, mobilisation, assembly and testing of equipment
* Member of multidisciplinary well construction teams
* Operations supervision; HSE compliance
* Performance appraisals, goal setting for personnel
* Development of business plans & strategies
* Analysis of market, identification of new markets & opportunities
* Presentations to customers and colleagues
* Preparation of proposals, tenders
* Monitoring of service quality including KPI reporting and analysis
* Supervision of business development personnel
* Selection and organisation of personnel for MLT training
* Implemented innovative solutions for projects in Malaysia, China, Indonesia

1997-1998: MULTILATERAL DRILLING MANAGER: Sperry-Sun, Canada & Global
* Managed and mentored a team of 3 MLT engineers
* Co-ordinated project in Colombia
* Preparation, presentation of training schools, equipment demonstrations
* Analysis of operational problems, implementation of remedies

1996-1997: MULTILATERAL DRILLING ENGINEER: Sperry-Sun, Canada & Global
* Responsible for planning and deployment of MLT globally including Norway, UK, Canada, Venezuela
* Support for projects in the Middle East
* Design and testing of new ML technology
* Drilled well to test new short radius and CT equipment
* Drilled well to test new ML technologies
* Disseminate best practices; write procedures and technical manuals

1993-1996: DRILLING ENGINEER: Sperry-Sun, Europe
* Drilling engineering support for directional operations: BHA analysis, recommendations; hydraulics analysis; directional planning; failure analysis of downhole tools
* MLT Co-ordinator on Europe's first multilateral well
* Temporary Directional Drilling Co-ordinator for NAM offshore team

1991-1993: ADT UNIT MANAGER, Sperry-Sun, Norway
1990-1991: SENIOR ADT, Sperry-Sun, Nigeria
1987-1990: SENIOR ADT, Sperry-Sun, North Sea
1985-1987: APPLIED DRILLING TECHNOLOGY ENGINEER, Sperry-Sun, North Sea
1984-1985: SDL ENGINEER, Sperry-Sun, North Sea
1981-1982: SURFACE DATA LOGGING (SDL) ENGINEER, Nigeria
* Monitoring and analysis of drilling operation to ensure efficiency and safety
* Constant monitoring, analysis and detection of pore pressures and fracture pressures
* Kick prevention /detection and well kill procedures
* Surface data logging and analysis
* Recommendations for optimising drilling performance
* High pressure, high temperature experience
* Shallow gas, sour gas experience
* Semi-submersible, jack-up and land rigs: North Sea, West Africa, Arabian Gulf

QUALIFICATIONS & EDUCATIONAL COURSES:

* B.Eng in Mechanical Engineering – University of Liverpool, UK
* 4 'A' levels & 9 'O' level qualifications

Training Courses:
* Business Acquisition Training (Malaysia, 2002)
* Effective Negotiating (Malaysia 2001)
* Presentation and Communication Workshop (Canada 1998)
* Well Completions, Intermediate Level (Canada, 1997)
* Directional Drilling update (Canada, 1997)
* AutoCAD LT (Canada, 1997)
* Multilateral Technology (Canada, 1996)
* Drilling Engineering (Houston, 1993)
* Drilling Fluids Technology (Houston, 1993)
* Mud Motor Mechanic (Aberdeen, 1993)
* Directional Drilling (Aberdeen, 1989)
* Applied Drilling Technology (London, 1985)
* Directional Surveying (Great Yarmouth, 1985)

ADDITIONAL INFORMATION:

* Born 3rd August 1960, Married, British
* Language skills include basic French, German, and Dutch
* Member of The Society of Petroleum Engineers since 1995
* Author of 10 published papers/articles
* Proficient in Windows and MS Office software.
* Proficient in directional well planning and drilling engineering programs, including directional BHA analysis, torque and drag analysis, hydraulics.
* Fully familiar with on and offshore drilling operations and equipment

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 1875)

Go to Search Parameters...

Brief Description

Junior geologist with some prior experience in both exploration and mining. Skills include mapping, core loging, sampling, 3D modeling (Gemcom), statistical evaluation, grade control and reconciliation. Strong communication skills. Available immediately.

I am a young energetic Mine Surveyor who has a three year diploma certicate from Kwame NkrumahUniversity of Science And Technology, School of Mines, Tarkwa, Ghana. I have the ability to deliver on time to time and with minimum supervision.

To obtain a challenging position that utilizes proven experience and skills.

Primavera Experience

I have completed B.E,(Electrical & Electronics Engg) in may 2006 with 70% as the aggregate from Anna University(Kamban engg College) India.Having 2 years experience in transformer manufacture, Being given to understand that you are entertaining candidates for various positions

Drilling professional for 20+ years; extensive international well construction supervisory experience; directional, drilling engineering and management experience; drilling project manager of China’s first horizontal multilateral CBM well.

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

As a Mining Engineer, I have technical knowledge and managament skills. Computer skills (MS Word, Excel, Power Point). Drilling, Blasting. Tunneling. Development, Preparation and Production.

Nace level 3 coating inspector, CINI certified insulation inspector & Chartek certified fireproofing inspector.

I am an engineer holding a university degree (B.Sc) in electrical engineering Aden - Yemen, I have 8 years experience, 5 years in electrical & electronics maintenance and 4 years experience in a Company in Saudi Arabia has Industrial agencies responsible of after sales services

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

I have 10 years experience in instrumentation and control field. I have designed, installed, tested, calibrated, start up, commissioned, maintained and repaired industrial electrical and instrumentation control systems and skilled in PLC, DCS, Programmable drive based control systems.

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

Civil engineer, Project Manager, contract Manager

Mining engineer with experience in strip mining and underground metals mines. Graduating with Master in 2007. Techinical interests in cut and fill mining.

Expertise in SIEMENS PLC & SCADA, B.E. (Electronics) from University of Pune

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

Strategic thinking Executive leading environmental, health and safety area. Recognized for assessing environmental, health and safety protocol, formulating and implementing highly effective policies, procedures and training to meet compliance, minimize injuries & reduce worker’s compensation claims.

I am having industrial sales experience of around 8 years in Hydraulics & filtration system & its component sales.

Qualifications: B.E (Mechanical). Graduated with second class, first division honors. Have an MEP consulting background with over 2 years experience. Advanced in: AutoCAD, Solid Works, Excel, Visual Basic programming, Word, TRACE heatload and Matlab programming.

Electrical engineering major in power .

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

Electronics and communication Engineer

Experienced Mechanical supervisor with over thirty years spent employed in the middle east.

GSM/CDMA Project Manager

Experienced & Seasoned Engineer

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

Contracts Manager

Im msc chemistry qualified chemist worked in iron ore mine in diff field as sampling,chemical and physical analysis, administration

Experienced Engineer, Diverse Background, Mining, Environmental

A chemist with technical skills trainings in Industrial Process Controls, Advanced PLC, Hydaulic Industrial Controls, PLC, Electro-Pneumatics, Calibration for Process Instrumentation, Advanced Industrial Motor Controls, Pneumatic Industrial Controls & Industrial Electrician

Project maintenance manager/planner/trainer

9 years of extensive experience in Project Management, Planning and Execution involving fabrication, erection & commissioning of Piping & Equipments in Nuclear Facilities, Petrochemicals, Aluminum Smelter and Gold Mine Projects.

Graduate in mining engineering,MBA in Operations Management,5 years experience in opencast mining

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

AutoCAD, AutoDesk, CATIA V5, Pro E, SolidWorks, MatLab, MathCAD, Maple, MDesign, Ricardo Wave, GT Suite, Fluent, BasicStamp, C++, C+, PSpice, and basic Java programming „« Windows operating systems, Microsoft Office

Maintnenace Foremen looking for longterm employment

Metallurgical Engineer

Speak, write and read French, English and Arabic. Abilities to acquire new knowledge and skills quickly

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

Extensive Experience in the industry!!

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

Instrumentation, Automation, control & electrical engineer with 3 years experience

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

Master of Geology, experience from african countries: Projecting, execution and interpretation of prospecting and exploration for branch "Economic Geology" (heavy minerals and gold, placers and hard rocks, greenstone belts terrains/shared rocks).

Having 4 year exp. in automotive sector.

IT PROJECT MANAGEMENT

Well versed with ISO-9001:2000, ISO/TS-16949:2002 QMS, MS-OFFICE

Mining engineer, master in HSE, no experience.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out