Resume - Project Controls Manager - cost control, scheduling and estimating

Misco Jobs

Resume #29128

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Project Manager, Project Controls Manager, Estimating Manager

PROFILE
Possess the skills to bring a project in under budget and ahead of schedule for the client.
Project Controls professional with forty-three years of experience with Bechtel and Parsons Corporations on numerous projects in many overseas locations. Strong project controls and estimating management background gained by preparing and supervising the preparation of numerous Capital Cost estimates for Department of Energy, petroleum, power, mining, industrial and transportation projects. Experienced in preparing and presenting earned value progress to company and client management. Proficient in planning logic and statusing schedules. Strong background in project Controls training skills both on-the-job and classroom and have successfully trained indigenous personnel in several countries.
Served as Project Controls manager on numerous projects: Korea High Speed Rail, Palestine infrastructure, Cantarell offshore Petroleum platforms in the Gulf of Mexico, Syncrude refinery in Northern Alberta, several fossil and nuclear plants and Mining and Metals such as copper in Chile, vanadium and iron ore concentrators. Proficient in total estimated cost techniques ¡V Direct, indirect, engineering, escalation, contingency and Fee and preparation of management presentations.
Developed a comprehensive estimating/project controls database in the Access software and can work with many leading software packages.

EXPERIENCE
July 2004 ¡V Present Parsons, Amman, Jordan
Deputy Project Controls and Estimating Manager

Currently estimating manager responsible for preparation/updating for scope of 13 Job Orders for the USAID water projects in Iraq. Developed an estimating system in Access software to accommodate these estimates. All Job Orders and amendments were approved for implementation by the client. Was also responsible for all project controls activities in the Parsons USAID Amman project office.

September 2003 ¡V June 2004 Concentricpc, Knoxville Tennessee
Project Controls Manager

Consultant responsible for all project controls activities in a nuclear decontamination and decommissioning company. Prime responsibility to establish performance measurement system and an estimating system for this growing company.

January 2003 ¡V August 2003 Bechtel National, Hanford, Washington
Capital Cost Estimating Supervisor

Responsible for capital cost estimating on the $6.0 billion Nuclear Waste Treatment Plant. Encompassed directing several estimators in the preparation of cost estimates for trends and forecasts. Review estimates and present them to company management.

April 2002 ¡V December 2002 Bechtel National, Hanford, Washington
Commercial Manager

Commercial manager on the Nuclear Waste Treatment Plant for the Department of Energy, Hanford Washington Reservation. Member of the Contracts team responsible for preparing the commercial portion of Change Orders. Involved preparing detailed estimates of contract changes and presenting them to the prime contractor and the client (DOE). Member of the change order negotiating team.

June 1998¡VMarch 2002 Bechtel International, Seoul, South Korea
Project Controls Consultant
Project controls consultant on the Korea High Speed Rail project with the responsibility of identifying potential scope, cost and schedule changes (Trends), estimating them and reporting them to management and managing the changes with the aim of reducing negative cost and schedule impacts. Prepared and conducted seminars on estimating, budgeting and the Cost Trend Program.

1996¡V1998 Bechtel International, Ciudad del Carmen, Mexico
Project Controls Manager
Project Controls Manager on an offshore Pemex petroleum mega project (Cantarel) in Mexico. Responsible for preparation and management presentation of the Capital Cost estimate and schedule for work on five platforms. Implemented the tools for estimating and project control and trained the Mexican nationals to use these tools for control and reporting status of cost, schedule and physical progress. Developed and updated the estimate and project schedule on a weekly basis utilizing the Primavera software.

1994¡V1996 Bechtel International, Copiapo, Chile
Project Controls Manager
Project Controls Manager on a fast track Copper concentrator project in Chile. Developed the Capital Cost Estimate. Established the project controls systems from the beginning and was instrumental in bringing the job in under budget and three months ahead of schedule. Received a bonus from the client for this effort.

1992¡V1994 Bechtel International, Jerusalem, Palestine
Project Controls Manager
Served as a Project Controls Consultant on a team with offices located both in the West Bank and Gaza Strip of Palestine. Responsible for developing the Capital Cost estimates and managing cost and schedule for approximately one hundred infrastructure projects for the World Bank and Palestinian Authority. Major accomplishment was participating in the establishment of a comprehensive database in Access for Capital Cost estimates and reporting to the World Bank of the funding, costs, and schedule of these projects. Also trained local Palestinian engineers in project control techniques and preparation of Capital Cost Estimates.

OTHER PREVIOUS EXPERIENCE
1991 ¡V 1992
Project Controls Supervisor on the Bay Area Rapid Transit program in Oakland California. Was responsible for preparing the Capital Cost Estimate, cost reports and trends for all rail sections on this project. Conducted weekly cost status meetings with the project managers for each of five sections. Updated the estimate for approved scope changes. Worked closely with client management to prepare the comprehensive monthly cost and progress report.

1989-1991
Served two years in Internal Auditing which involved traveling to the company's worldwide offices and projects to audit estimating procedures and other practices for project controls functions. Was a team leader on several audits that involved editing "observations" and "findings" and presenting them to company management.

1987-1989
Assigned to Jakarta Indonesia as a consultant to the Indonesian fossil Power Company (PLN). Participated in establishing an engineering design arm for this agency. Responsibility was to establish a Project Controls team and to train locals in the preparation of capital cost estimates. Conducted both classroom and On-the-Job training of Indonesian nationals in all aspects of estimating and Project Controls techniques.

1983-1986
Appointed to Jakarta, Indonesia as a consultant to the Indonesian Nuclear power agency (BATAN). Trained Indonesian personnel in Capital Cost estimating and all functions of project controls during the construction of a nuclear research reactor.

1962-1982
Served as Project Controls Manager, Cost Engineer, Scheduler and project estimator on numerous Petroleum, Nuclear, Fossil, Mining & Metals, Industrial and Government (DOE) projects. Began career as a piping designer and field piping engineer on mining and power projects.
Computer Proficiency
Access, Excel, Word Processing, Estimating Programs
Languages
English, Spanish, Bahasa Indonesia, and some Korean Hangul
Education 1960 ¡V 1962 College of Marin, San Rafael, CA
„X Business Administration.
1963 University of San Francisco
* Business Administration
1964 Washington DC School of Design, Washington DC
* Mechanical Drafting and Design - Diploma

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 1875)

Go to Search Parameters...

Brief Description

CAD DRAFTSMAN

seeking for an employment in mining industry

Young enthusiastic Mining Engineer (B.Tech Hons.; IIT - Kharagpur) just graduating with 120+ days of field experience in drilling , safety and scheduling. Good computer skills and a diverse course content in college.

Experience in Collection and processing of Ground Control Points data using Geodetic quality GPS receivers and LGO(Leica Geo Office & TGO (Trimble Geomatics Office)

My Q-HSE management experience spans more than 20 years and includes a broad spectrum from that of worker, public safety officer and emergency responder to educator, consultant and civilian contractor to both construction and general industry clients, including 21 months in Afghanistan.

Graduate Structural E.I.T.

I have 12 years experience as an engineer in mechanical engineering field. I worked last 10 years as a Ship Repair Engineer and Project Engineer. I can undertake full responsibilities and worke idepenerntly in teams. I respect and highly dicipline person.

Failure Analysis, corrosion, MS Office, Visio, Corel

I am a surveyor looking for a rewarding job.

Graduated from The University of Nottingham with a BEng (honours) in Mining Engineering in 2003. Currently employed with The Mines Rescue Service, specialists in Health and Safety.

Project Controls Manager - cost control, scheduling and estimating

Procurement/ purchasing engineer/Manager

I am an electromechanical engineer and I have experience in power plant and oil refinery

Mining Engineer

BS in Mechanical Engineering with EIT certification and five months experience as co-op at Cargill Fertilizer, Inc.

22 years old. single 2:1 B.Eng.(Hons) Mining Engineering Degree from Camborne Schools of Mines 4th in class 4 Years Military experience with Territorial Army, last 2 years commissioned (similar to U.S national guard) 3 months work in a Copper, lead, Zinc and Gold operation in Spain.

Senior Construction Manager

An experienced mine surveyor with both underground and surface mining experience who is looking up to a new challange.

I have completed my Diploma in Electrical Engineering at Vaal University of technology. I am currently doing inservice training at lesotho flour mills

Geotechnical engineer with international experience

SPCC,AUTOCAD,GIS,MICROSOFT OFFICE,FRENCH,AIR POLLUTION MONITORING,ORGANIZED,TEAM PLAYER,QUICK LEARNER.

Process Metallurgist

Process / Production / Project Engineer (Aluminium Smelter)

I have 3-years diploma of Associate Engineering in "Electrical Trade. Presently "FRIENDSHIP TEXTILE MILLS (PVT) LTD" Kaachi-Pakistan, doing work as Sr-Executive Officer in power generation department

Technical Author, Trainer, Project Manager

I am an engineering specialist having more than 19 years of experience, graduated from M.I.T, the most reputed Institute in India for Instrumentation. At present I am working as the Associate General Manager (Projects) for one of the leading Zinc producer in the world.

Quarry, Blasting, Explosives, Tunneling, Mining, Open pit, Crusher, Earth Moving

Mechanical Engineer - Fresher

I feel I exhibit the requirement needed to hold a position with your company. I would welcome the chance to prove myself as a valuable employee. I consider myself to be a hardworking, dedicated, and reliable individual with good moral values and ethics.

Currently enrolled for the final year in the Department of Metallurgical Engineering and Materials Sciences at the Indian Institute of Technology (IIT), Bombay, India. International exposure in research and possess excellent analytical and problem solving capabilities.

Highly experienced manager in the mining, aggregates, construction, and marine industries.

Engineering/Project Manager skilled in organizational/project management/business development. Highly skilled in client relations/development. Diverse experience in environmental consulting/nuclear power/regulatory compliance/facilities/systems engineering/infrastructure projects.

Metallurgist/Mill Engineer, Grinding/Flotation/Cyanidation/Solvent-Extraction/Electrowinning

GIS, geomatics, ArcGIS, ESRI, Cartography, Map, Mapping, Geography

Motivated, energetic, pro-active, confident go getter committed and thriving on challenges. Always striving to keep abreast with latest technological research anddevelopment. Quick learner with an eagerness for supplementary enlightenment. Strong administrative, technical and interpersonal and skil

Site investigation, Design of Foundation, Design of Embankment and Retaining Structures, Slopes Stability, Numerical Analysis, Constitutive Modelling, Contaminated Land Remediation, Ground Work Supervision, Mining Engineering, Total Station and Precise Level Surveying.

Power electrical engineer from Aleppo university

17 year experience in environmental management as Head - EHS and GM (Env. Tech) in large environment consulting and waste management co

Piping engineer currently working with Bechtel India Pvt Ltd. I am having a 2.6 year experience as piping engineer/ PDS administrator.

Diversified: Nuclear Power Clearance /Mechanical/Electrical/Civil/Architectural/GIS Map/Water Design

31 yrs im field. I have ben an Electrical Field Engineer For a long time

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

My key strength includes communication, interpersonal, analytical, creativity, troubleshooting skills and quick problem solving ability. CAD skills include AutoCad, SolidWorks, Catia V5

Production, planning & maintenance (reactive & proactive) of crushing & screeing plant as well as projects execution (have 3 yrs. full time Dip in Mechanical Engg)

Mining engg with 4yr exp in hard core iron ore mines and now working as executive business development in Leica geosystems looking after Truck despatch system for open cast mines

Experience has been gained operating from supervisory, management and design standpoints on a variety of E&IC contracts within the U.K. and overseas.

17+ years contruction electrician foreman, electrical engineering and PLC experience. The majority of which was obtained on high profile DOE contracts; DOE Q cleared; BSEE

As you will note from the enclosed resume, I have majored in Aerospace and Mechanical engineering and have participated in many development projects. My drafting/engineering background has prepared me to motivate people in a technical environment.

I am a graduate of Mining Engineering at Nottingham University, UK, as of July 2004. I am seeking employment in the mining or petroleum sector, and am willing to consider anything that will challenge me or give me a solid skill base.

This resume has been created in hopes to find potential employers who are looking to take a chance with a young energetic go getter looking to get back into the field of geology. I am currently working in the Computer Networking Field as a Assistant Network Administrator

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out