Resume - I am a mining professional seeking expat opportunities (Contract or Permanent) i...

Misco Jobs

Resume #31905

CONTACT INFORMATION:
View contact information...

BACKGROUND INFORMATION
The majority of my experience has been in Open Cut and Underground mining (Base Metals); with a technical background in Mine Surveying, and experience in Drill and Blast Engineering and Site Engineering (UK Construction and earthworks industries).

As an employee I bring a wealth of experience to your company from diverse areas such as mining, earthworks, construction, looking after sub-contractors as well as plenty of enthusiasm and a genuine love of mining. My referees will confirm that I am a reliable, hard working employee with a good head for mining.

QUALIFICATIONS
Bachelor of Surveying (2001), Queensland University of Technology, Australia.

Short courses completed.
* S1 supervisory course – Risk Assessments and Safety Analysis.
* Senior First Aid
* Defensive Driving
* 4WD Recovery

SKILLS AND ABILITIES
Computer Software
I am computer literate with reasonable knowledge of several computer packages. I also have an aptitude for quickly picking up a working knowledge of software packages.

General
Microsoft Office – Excel, Word, Power Point and Front Page.

Mining/Surveying/Engineering
AutoCAD, Vulcan, SurPac, Minesight, SurvaCAD, Orica Shotplan, QuikSLOPE, and limited exposure to Terramodel, CivilCAD and 12D.

Other
MIMS, ArcView, Adobe Photo Shop 6, CorelDRAW 9 and Visual Basic. I am also capable of writing programs for HP 48 G calculators.

SURVEY EQUIPMENT
I have a good working knowledge of several types of survey instruments, including:
* Total Stations – Geodimeter 620DR Robotic; Trimble 5800 Robotic and a number of Leica models.
* GPS – Trimble 4700 and 4800 GPS systems, including Base Stations, and radio repeaters. Various hand held models.
* Cavity Monitoring – Optech CMS System.
* Deformation Monitoring – Leica 2000A Total Station (Remotely operated with Radio Modem and QuikSLOPE and AutoSLOPE monitoring Software).

WORK HISTORY
Safety is always my top priority. I actively participate in, and have led my departments daily safety meetings as well as being the representative for the Technical Services department at monthly safety meetings when required. I have also been responsible for the competence based testing and issuing of Site Driving Permits.

Current
Since December 2004 I have been travelling abroad and am currently working in the UK as the Senior Engineer for an earthworks and construction project. This work has been on a contract basis with my responsibilities includeding:
* Overall responsibility of engineering on site, including training of junior members of staff.
* Setting up the office record keeping and filing systems.
* Supervision of sub-contractors.
* Short Term Planning.
* Quality Assurance and Inspections reporting.
* Safety, Health and Environment training and compliance (i.e. Written the Site Induction and preparing Task Statement of how works are to be carried out), and associated record keeping.

Opencut Mining
January 2002 – December 2004.
FIFO Opencut copper/gold mine that uses conventional bench mine techniques with face shovels and dump truck fleets. I have been exposed to all aspects of surveying on site.
* Site preparation and survey set-outs.
* Detailed surveys and computer modelling of all mining areas.
* Deformation monitoring of pit walls.
* Production of weekly survey plans, End of Month Survey Volume Reports and computerised volume calculations of benches, ore regions and stockpiles.
* Miscellaneous construction survey work and preparations for ground control for Aerial Photography.
* Purchasing Survey Supplies and Input into budget preparation.

Underground Mining
May 2004 – December 2004 (On Secondment)
Open and Bench Stopeing techniques. During my secondment I have been exposed to many aspects of underground mine surveying including:
* Installation of lasers for heading direction control.
* Mark up for various drilling (Stopes, ventilation, cable bolts, exploration, etc).
* Preperation of Mining Method Instructions – "Heading Memos"
* Stope measurement and void measurement and computer modelling.
* Updating and maintaining computerised survey record of mine workings.
* Other miscellaneous survey pickups and markups.
* Purchasing survey supplies and arranging servicing of instruments.

While on secondment I was sent to another operation. As the sole surveyor, I was responsible for all survey functions at the mine for a one month period.

Mine Engineering
I have gained experience in Drill and Blast engineering by working with and relieving for the D&B engineer when required. My experience in this area includes:
* Planning and Design of Pre-Split and Production blast patterns.
* Design of firing initiation sequences.
* Plan Preparation, Load Sheets, and associated record keeping.

I also have been involved in Short and Medium Term Planning activities for opencut and underground mining.

HOBBIES
My other interests include: Reading (Financial and Investment), Languages (Currently attempting to teaching myself basic Spanish), Cricket and Fishing.

REFEREES
A list of these referees can be forwarded to you at your request.

Thank you for your time and consideration.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 1875)

Go to Search Parameters...

Brief Description

Seeking a challenging career in the field of MECHANICAL especially in maintenance. Where I can utilize all my technical, analytic & management skills. I have done Diploma Engg. in Mechanical.

I am a material planning professional with extensive experience in Production Planning, Scheduling, Inventory and Materials control, Document controlling and Purchasing.

As listed on my resume I have experience in landfill remediation and operation, groundwater quality analysis, groundwater sampling, oversight, knowledge of environmental regulations and investigations, plan and report preparation and experience in performing site investigations to assess hydro-geolo

Entry-level mechanical engineering

Landman/Paralegal/Marine Seeks Employment

Technical skils and competences: 2 to 3 months per year from 2000-2007 I worked in a small shipyard all kinds of work ( painting, grinding, welding, plastic works etc.) and also the rest of the year on a ship.I am seeking a challenging position with a well established company.

Over ten years experience in providing the highest level of consumer and business-level client satisfaction, by performing a variety of assignments including: customer call functions, technical support, solving billing issues

B.E, Electronics and Instrumentation (2006) with 70 %. I am very much interested to make a good career with your esteemed organization. I did DCS, PLC & SCADA training from JRD TATA AUTOMATION CENTER & HONEYWELL, Pune. But willing to work on any technology.

Project Geophysicist (Mineral Exploration)

To be a part of your esteemed organization and prove myself dedicated, worthful and energetic in Mining and Reliability Engineering, that gives me scope to apply my knowledge and skills to the best and dynamically work towards the success and growth of the organization.

Competent Instruments/Production Technician

Class A CDL, railroad equipment ie. spotter truck tandem dump truck, front end loader, fork lift, assorted types, sizes and hp tractors & mowers, snow removal, emergency & on call & work in extreme and inclement weather conditions, wiring, installation & preliminary programming of traffic signals.

I am a student of Physics in the third year of my bachelors degree, I have work experience in Geophysical data collection, Construction, and data processing. I have done Karate since I was 6, and I was the captain of the hockey team in highschool. I love a challenge.

Bilingual Entry Level I&C Engineer

Implementation of H.S.E. policies on and off project sites, Knowledge of fire prevention and safety practices, Field sampling for all Environmental studies, ability to make accident investigations and prepare reports, good administrative & Environmental quality management skill, good teamwork spirit

Field engineer

Knowledge in repairing computer hardware and other components of the computer. Reprogram operating system of computers if required. Installing software’s needed by the computer. Troubleshooting computer problems.

Looking for o job with better condittions

Civil Engineering Technologist with gas pipeline experience, including construction, cathodic protection and supervision. 3 years Maintenance Planner experience in the Pulp & Paper industry. Very familiar with rotating equipment, SAP, AS400, and EMPAC. Very reliable and efficient

Mechanic, soldier, outgoing

AutoCAD "2D, 3D", Customer Service, Microsoft Office, Car Supervisor Engineer etc

Pursuing Master’s in Material Science & Engineering at Michigan Technological University, Houghton MI(May 2006)

I am a mining professional seeking expat opportunities (Contract or Permanent) in either a production or technical field. The majority of my experience has been in mining; with a technical background in Mine Surveying, and experience in Drill and Blast Engineering and Site Engineering.

Graduate Mechanical Engineering

Forensic reviewing and reporting, 2 years engineering pipeline company, 4 years government drugs screening laboratory, GC/MS, 10+ years non wizardry speech freedom computer environment

OSHA certify

Seeking position where more than seven years of process control and instrumentation experience in petrochemical environment will add value. Team player, succeed with organizational and supervisory skills. Willing to relocate.

Safety, Environmental Health and Industrial Hygiene

Entry Level Chemical Engineer

Pursuing MBA Marketing. Completed BE Mechanical good at convincing people, selling skills, etc, good at computers, good communication skills

Senior Instrument Technician / Foreman "Experience: 10+years", working with one of the largest refinary in middal east.

BA-degree in Geosciences ( 4 years) graduated in 2000

Computer Programmer, Database Administrator, System Analyst

Electrical, instrumentation, PLC's, mechanical, electrical design, maintenance and site supervision

Microbiology, environmental health and safety technologies/ studies,supervison, training, research& development, safety audits/ investigations, compliance monitoring, educationa, professional and academic training in biological/ life sciences, environmental health &safety.laboratory operations

An organized, experienced, self-motivated individual, seeking an opportunity to work within an organization where quality and commitment to excellence are valued as well as to be a contributing team member where my abilities and experience can be a significant factor in achieving company goals.

I am a trained Geologist. I am versed in working in the field. I can work well under minimum supervision. I am honest, deligent and keen to progress. I am a team player. It is best to reach me by E-Mail

General Manager ,10 yrs Experience; 3PL Logistics, Supply Chain Management, Freight Forwarding, International Trade, Project Management, Materials & Inventory Control, Client &Vendor Relations, Finance, Information Systems

Petroleum Technologist, Technical Support, Electrical Engineer, Oil & Gas Analyst

A proactive and flexible candidate with strong foundations in chemical engineering, environmental management and business management looking for a position of Environmental Engineer

An experienced Micro and Macro Level Project Management position offering an opportunity for growth in the Construction, Manufacturing and Production Industry.

I am a student of ninth semester of Chemical Engineering in the UNEXPO-Barquisimeto, Venezuela. I have excellent leadership and teamwork skills, I am very responsible, self-motivated and proactive. I want to develop a professional internship during 16 weeks.

PRO-E 2001, Unigraphics, AutoCAD, Solid Works 2004 Diploma in Mechanical Engineering from B.L.D.E.Ass Polytechanic.Bijapur, Karnataka State in 2001

Three (3) years experienced in producing of detailed structural steel and concrete drawings (fabrication and design drawings) for onshore, offshore and Front-End Engineering Detailed-Design projects. One (1) year experienced in manufacturing plant as Technical Staff/ Production Engineer

Safety experience in many different settings (i.e. government, manufacturing, healthcare) with a BSE in occupational health and safety from an accredited university

Mechanical Fitter&assembling,Mechanical Site Installations,High School&Industrial Training Institute

GIS, Software Developer and Smart Card Programmer

Windows 2000/2003, Active Directory, MCSE, DNS, DHCP, WINS

I'm a chemist with a B.S. and a technical college Diploma in chemical technology with one year experience.

Instrument technician with 5+ years experience

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out