Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #34169 next resume »» CONTACT INFORMATION: View contact information... SYNOPSIS OF EXPERIENCE Worked for mining consultants, major and junior mining companies. * Reporting of resources/reserves according to NI 43-101 * Creation and maintenance of geologic resource block models, model updates, and resource estimation using Minesight, Vulcan and Gemcom. * Mine geology (grade control, exploration and mapping) in underground and surface mines. * Short term mine planning. * Blast planning and design. * Weekly and monthly mine and mill reconciliation. * Precious metal and base metal exploration (grass root projects to definition drilling in existing mines). * Consulting work in the diamond exploration field. * Rock mechanics in convergence prone underground mines. * Geotechnical ground and roof support investigations. EDUCATION 1990 Master of Science: Geological Engineering, Emphasis: regional structural geology and tectonics, deformational history of mineral deposits, mineral exploration, fault related igneous activity University of Alaska, Fairbanks, School of Mineral Engineering, Department of Geological Engineering/ Mineral Exploration 1981 Bachelor: Mining Engineering, Emphasis: Rock mechanics, brittle deformation, underground road convergence, rock bursts Technische Fachhochschule Georg Agricola für Rohstoff, Energie und Umwelt zu Bochum, Germany,(University of Applied Science - Mining, Energy and Environmental Science, Bochum, Germany) MEMBERSHIPS AND CERTIFICATIONS Qualified Person after NI 43-101, American Institute of Professional Geologists, Professional Geologist registered with the State of Alaska, BDG, Germany RELEVANT WORK EXPERIENCE 07.07 – present Senior Mine Geologist (Chief Modeler) Maintain and advance the computer model of a 40,000 ton/day open pit gold mine using MINESIGHT modeling software. Update the geologic model from ongoing exploration drilling. Develop pit optimizations using Lerchs-Grossmann or Floating Cone routines. Generate or update resource models of satellite ore deposits along the mineralization trend. Reconcile monthly production figures with the the exploration model, blasthole model, production numbers and reported mill tons and grades. Create resource and reserve figures for corporate end of year reporting. 02.06 – 06.07 Manager, Geotechnical Services Modeling of Bullion River's underground narrow vein gold deposits using Vulcan resource modeling software. Prospects are former or current mines and projects of different development stages. Permitting oversight of mining operation 05.-05 – 02.06 Resource Engineer Implementation of reconciliation procedures in this rehabilitated open pit gold mine. Block model set-up and maintenance including mine database administration. Aiding in general start-up procedures. Establishing short-term mine planning schedules. Designing of blast patterns. Conducting ore control with daily grade and tonnage tracking and mill reconciliation. 06.04 – 05.05 Quality Control Engineer Identify ore/waste boundaries within blast patterns based on blast hole assays. Calculate bench grade and tonnage. Update block model using Gemcom. Identify and flag ore zones in the field for mucking activities. Collect grade control samples of muck faces, crusher belts and leach pads for reconciliation. Compile monthly grade control reports including drill progress, blast sequence, ore and waste tonnages mined, grade distribution of different rock types and reconciliation of actual, grade control and reserve models. Monthly royalty distribution preparation. 02.02 – 06.04 Project Engineer/Geologist Plan and perform geotechnical assessments for foundation and construction design. Write proposals for projects of up to 2 million Euros. Participate in mergers and acquisitions (M&A) environmental Due Diligence Assessments (largest project: 400 sites worldwide to have been completed within six weeks). Increase the URS Deutschland mining exposure. Work on mining damage issues and mining subsidence problems. Evaluate risks of possible ground failure and other mining damage resulting from historical mining activities. 03.99 - 08.01 Engineering geologist Create proposals for geo-engineering projects. Establish and track project budgets. Conduct soils investigations for foundation designs, geotechnical studies and PHASE I environmental assessments. Recommend foundation designs and construction procedures for investigated properties. Carry out fieldwork and write reports in timely fashion; correspond with governmental and regulatory agencies; research geological parameters and historical information for litigation procedures. Inspect construction activities including earthworks, concrete and asphalt placement, shear wall construction, welding results and fire proofing activities. Operate drilling equipment (truck mounted CME55, cat-head A-frame and portable diamond drill) for soil and rock testing (diamond drilling and hollow/solid stem augering). Conduct split spoon sampling and penetrometer testing. Supervise and conduct materials laboratory activities as concrete and asphalt testing, soil parameter determinations and nuclear density testing. Perform nuclear densometer field tests. 09.98 - 01.99 Contract geologist The work location was the Greens Creek Mine in Alaska. A new portion of the ore body was to be explored by an intensified temporary underground drilling program. Work activities included logging of NQ core, MAXIBOR surveying of diamond drill holes, creation of X-sections based on logging observations, and database compilation for INGRESS and DATAMINE applications. 07.98 - 08.98 Consulting geologist Duties consisted of an evaluation of a property in respect to possible diamond occurrences. Soil and stream samples were collected and analyzed for Diamond indicator minerals. Clay, likely derived from a kimberlitic source, yielded a number of chromites (high magnesium and chromium) known to be stable under diamond forming conditions. Potential exploration targets were generated and a follow-up program was outlined. The first diamond ever found in Alaska was collected on this property as reported on July 8, 2002. 08.96 - 04.98 Project exploration geologist 1997 Project geologist for exploration programs targeting base and precious metals on previously established mid stage projects (trench sampling and mapping) in eastern Alaska (Veta prospects in the Yukon-Tanana Upland) and in the copper belt of the Brooks Range (Wiseman). Additional early stage projects were initiated and consisted of soil grid sampling and geo traversing in Central Alaska (Tanana). Geologic settings of the exploration targets included massive sulfides, skarns and fault related mineralization. 1996 As the project geologist, I was responsible for the legal and geologic evaluation of potential claim staking targets in western Alaska (near Flat). Of about 20 investigated sites more than half were staked with a total claim surface of about 50 square miles. The geologic setting was mostly hornfelsed sediments in contact with igneous rocks of generally granitic composition. My duties included soil sampling, stream sediment sampling, and geologic traversing with the collection of geochemical samples and hand specimens. The staking crew (staking targets subsequent to my prior field investigation), consisted of up to 12 claim stakers and one geologist. The area covered was about a third of a 1:250,000 Quadrangle. An additional staking phase restarted in the winter. This effort connected two previously staked larger claim blocks adjacent to Placer Domes Donlin Creek property. 04.95 - 06.96 Department head/senior geologist Duties consisted of acquisition, project management and coordination of hazard evaluation programs in connection with soil contamination remediation activities. Projects were located predominantly on industrial or municipal properties, to a lesser extent on military real estate. Projects were equivalent to the US Phase I, II and III terminology. Larger clients were Esso and Shell. After 09.95 Responsibilities increased to maintaining the profitability of the cost center (office) and included accounting, budgeting and bidding as well as personnel and equipment planning. Supervised three project geologists and one field crew. 08.92 - 03.95 Engineering/Environmental Geologist 08.92 - 09.94 Supervisor of the department of geology, material science and damage analysis (GMD). Planning and conductiong of all phases of hazardous indoor materials handling. 09.94 - 03.95 In addition to activities mentioned above, duties consisted of supervising the geological laboratory (XRD, SEM), and acting as a supervising consultant in a soil exchange program. (Budget of about $6 Million). 10.88 - 02.92 05.91 - 02.92 Senior geologist of the extended exploration drilling program and the development drilling program (total of 25,000'/ month) Planning of the drill program, its holes, staffing, financing, permitting, and environmental impact. Responsible for timely realization of the drilling program and for professional interpretation of the drill data. Supervisor of six geologists, three geo-technicians, two Greens Creek drill crews and five sub-contractor drill crews. 10.90 - 04.91 Geologist of the drilling program (3300'/ month) Extensive core logging and development of X-sections of the ore body for mine planning. 10.88 - 09.90 Grade control geologist/Mining geologist responsible for the quality control in a strongly deformed Massive Sulfide Deposit. Steering of the production face to warrant the highest ore grade. Underground sampling and mapping of the ore body. On-site evaluation of production drifts. Photographing of faces sampled. Entering face data into AutoCAD and digitizing photographic information. Working closely with the mining department and the laboratory. Scheduling the sequence of face visits with shifters. 06.88 - 10.88 Exploration geologist Regional Juneau Gold Belt reconnaissance study in southeast Alaska with special emphasis on "gold mineralization in epithermal vein deposits". Collection of soil samples, steam sediments, pan concentrates as well as ore and bedrock samples of abandoned mines in the area. 08.82 - 05.84 Research assistant with the Mineral Industry Research Laboratory's (MIRL) Interior Project Fieldwork consisted of reconnaissance exploration of the entire Circle Mining District. The region comprises an area of 600 square miles. Investigation methods included general mapping with advanced rock unit descriptions, stream sediment, rock and soil sampling. Specific emphasis was given to structural parameters in an attempt to understand the tectonic history of the district. Laboratory work included the pulping of rock samples for chemical analysis and the preparation of thin and polish sections. Investigate prepared specimens in reference to metamorphic mineral assemblages and associated metals. The study furthermore included the utilization of Atomic Absorption Spectrometry (AAS), and fluid inclusion research on quartz veins. 03.81 - 07.82 Mining engineer (only during semester breaks) Scientific research in the department of rock mechanics/road support. Statistical evaluation of convergence properties in production drifts of the Ruhr area. Technical consultant for mining companies in the Ruhr area concerning drift support issues. 10.77 - 11.80 Underground coal miner (only during semester breaks) Total of an additional ten months in drift development. 11.76 - 09.77 Underground coal miner Training department: six months Drift development: five months. View contact information... «« previous resume next resume »» Search Results (Resumes 251 to 300 of 1875) Go to Search Parameters... Brief Description Mining Engineer, 30 yrs+ experience in Mining Management, (Coal, Hard Rock, Copper, Nickel) working as csu saferty officer in sabic,I am having Industrial safety diploma from annamalai university.chennai Mining Engineer with a flair for production& Marketing, Managerial background with wash plant experience I am working at Hydrocarbon Development Institute of Pakistan working on source rock maturity and coal rank determination. Designer/Drafter with Inventor experience. Geology & Mining Engineering Degrees; Underground and Surface Experience; Professional Geologist; Qualified Person after NI 43-101; Vulcan, Minesight, Gemcom Experience maintenance foreman /chief electrician Mineral processing engineer, AutoCad drafter and transportation system design Design and drafting OIl and Gas processign facilities, Structural, Piping, Civil. 7 Years experience with 3D CADWORX modelling on Canadian and international projects. Recently worked on Enterprise's Meeker II facility as well as Green River Gas Plant (PROPAK) early 90's. Smelter expert - ISA smelter; waste Heat Recovery Boiler (WHRB), DM Plant, Electric Arc Furnace, Rotary Holding Furnace (RHF), Converters, Anode furnace, casting wheel and Sulfuric Acid plant. Never give up persom and full of integrity 2 years and 3 months of experience as geologist of underground mine of Au/Ag and the exploration to ore deposits of Au, Ag, Cu and W. All this in my country, México. Project management of a quarry/mining operations. Mechanical Engineer: Engineering experience: 2 yrs, Erection,commissioning and maintenance experience: 4 years, static equipments, aluminium smelter Mining Engineer with MBA (Operations Management), FCC (Metal), Base Metal (OP & U/G) & Iron Ore Mining (OP) +22 years of Hands on Hard Rock Mining Experience in Open Pit Mining (15 yrs.) & Underground Mining (7 yrs.), Mine Operations, Short term Mine Planning, Drilling & Blasting, More than 16 years of experience in all areas of steel pipe manufacturing, including shop production, sales, distribution, and production management. Possesses excellent leadership, communication, and project management skills. Able to work independently or in a team environment. Total 5 years engineering experience and new graduate from managment school. Technician Komatsu Heavy Duty Machinery Mechanical Engineer with over 15 years of technical business experience with emphasis in cost control projects. Experience in a range of commodity types: VHMS, intrusion-related-, meso- & epithermal-Au and porphyry Cu-Au and Mo style deposits. (Australia, Turkey, Albania, Kyrgyzstan Saudi Arabia & Oman). Reviewed, designed, budgeted & implemented regional & mine-based exploration programmes Quick learner, motivated and dedicated in getting the job done . As Storekeeper we serve as the sole staff member responsible for performing all record keeping, issuance, recieving of a large supply materials and responsible for a large function of the storerooms I am a coal technologist having MSc. with coal tech. and 3 year experience in coal preparation plant operarion and managment. I mainly worked on bath type and cyclone type heavy media coal preparation plants. Civil engineer with surveying, mining, and GIS experience Senior maintenance planner. I do many things of maintenance planning system on Petrosea sites. Setting up maintenance process, controlling maintenance operation, and providing maintenance improvement based on current condition. GIS Specialist/Geologist/IT - M.Sc. Ore deposits exploration ; 3 years of exp. Serbia, Mongolia, Australia, Well Qualified, Skilled & Experienced proffer in Design, Consultancy, R&D in Civil, Structural, Geotechnical, Architectural and Industrial Engineering Free! I am an Engineering Geologist with 12 years post graduate experience in geotechnical consulting, construction supervision and mining operations. HAve post graduate qualifications in Engineering Geology (M.Sc) and am currently working as Geotechnical Superintendent at a world class mining operation. Bachelor of Science Degree, with eleven years experience in gold & copper exploration. Good knowledge of Mapinfo, core logging skills and mapping techniques. Use of Excel spreasheets to enter engineering and geological core logging data. Skills in technical report writing and analysis. Land/Mining Surveyor Objective: computer application in mineral processing or engineer in mineral processing Senior Mechanical / Piping / Materials Handling / Pneumatic Design Specialist, Checker, Design Supervisor, Project Manager or Consultant Reliability Engineer Mining engineer Over 15 Years of Experience, Underground, Open Pit and Civil projects Experience in open pit mining i.e. Quarry development and operations 8+years experience as a Geologist in gold and diamond exploration B.E.Mining, 12 yrs experience, Working in leading cement company in India, ACC Ltd, Holcim group company, getting trained to work in SAP, Head of the mining operations of the captive limestone mines, First class mine manager's certificate of competency Mines Safety dept (DGMS) Govt. of India I have been completed Graduation in Mining Engineering in 2004, having different types of experiences in field & office regarding estalished a New quarry & Crusher set ups , analysis the cost controling factor and having a open cast coal field experence.Also having experence of lime stone Mine. A young Mining & Geological Engineer, able to work by own initiatives and as part of team to achieve the objective set. Mine superintendent. Broad management and supervisory, engineering, production, mine startup, contracting, and cross-cultural experience in the underground environment. Mine sup't. Ten-plus years experience in backfill, shotcrete. Extensive xxperience in Latin America and Kosovo. Thorough knowledge of systems development and facilities management principles and practices. repairing,overhaulilng,diagnosing,servicing and troubleshooting of heavy duty machines,and other equipment. Registered Professional Engineer with 13 years experience in mineral processing and extractive metallurgy. Holder of a B.S. in Metallurgical Engineering and a M.S. in Environmental Science. Nine years experienced and motivated open cut production/planning engineer to secure a position in a mining company with considerable advancement opportunities I have 12 years experience in base metals, precious metals (gold and silver), platinum group metals, iron and steel processing. The plants that I have experience with encompassed ore transportation, crushing and screening, milling and gravity separation and classification, flotation, gold extraction Mines Manager with intensive experience of Underground Mining Operations of Semi Mechanized nature. Expert in presplit blasting techniques. valid UAEand Oman Blasting License.Experince of 2500 BLASTS. Worked with multinational companies. NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions. 1   2   3   4   5   [ 6 ]   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   Seach Parameters Change search parameters... CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com