Resume - Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years e...

Misco Jobs

Resume #35206

CONTACT INFORMATION:
View contact information...

Senior executive with highly successful record in operations, turnarounds, startups, P&L/project management, strategic planning, & business development.
Results-driven leader adept at capitalizing on opportunities, analyzing needs, solving problems, & managing teams.
* $600+ million/yr savings by eliminating OSHA violations. $200+ million/yr profit by doubling plant capacities.
* $200+ million/ship savings by implementing six sigma/reliability best practices and eliminating 75+% rework.
* $25+ million/yr savings by eliminating 50+% rework in semiconductor facility.
* Directed, managed, constructed, started up, developed, designed, & improved $multibillion production facilities.
* Outstanding communication, technical, & management skills. Managed 80+ person staffs/teams.

EDUCATION
MBA at University of South Carolina, Distinguished Student Award recipient, 3.9 GPA. 1988-91.
PhD work Chemical Engineering at University of California, Berkeley, 3.8 GPA. 1985-87.
MS Chemical Engineering at University of Delaware, 3.5 GPA 1982-83.
BS Chemical Engineering at State University of New York at Buffalo, Outstanding Student Award recipient, 3.9 GPA 1978-82.

EXPERIENCE
Project/Maintenance/ESH Eng. Mgr at NORTHROP GRUMMAN/WESTAR, 2nd largest defense contractor 2003-Present.
Led/directed engineering/reliability/ESH/maintenance/project management for multibillion-dollar composite shipbuilding processes.
* $200+ million/ship savings by eliminating 75% rework. Standardized/improved/developed/implemented: engineering design review & report/human factors/reliability/RAM/system safety/ incident tracking/MRP/operating manual/best practice systems.
* Developed/implemented: engineering (6 sigma/SPC)/safety/reliability/human factor/continuous improvement systems.

Sr. Systems Mgr./Eng. at PRAXAIR SEMICONDUCTORS/SAIC/WORTH, 2nd largest industrial gas firm 2000-2002.
Led engineering/ESH/operations management for semiconductor, aeronautical, $1.4 billion VX, & construction processes.
* $25+ million/yr savings by eliminating 50% rework. Standardized/improved/developed/implemented: MRP/ISO/engineering design review & report/operating manual/best practice systems. Determined chemical compatibility/cycle life/better labeling for system components. Tested/modeled air/z-purge/pipe flow/purge efficiency for cabinets and valve manifold boxes.
* Developed/implemented: design/safety systems, crane/VX PHAs, and JSA/investigation programs (due to 3 fatalities).

Process Engineer/ESH Manager at MILLENNIUM CHEMICALS, 2nd largest pigment producer 1995-99.
Led/developed/implemented/improved six sigma/ESH/operations/best practice management for multiple titanium dioxide pigment production facilities. Evaluated/commissioned capital projects.
* $200+ million/yr profit by doubling plant capacities. Commissioned reactors, conveyers, and spray dryers. Interacted with EPC contractors. Issued capital project feasibility/EVA reports (ore/coke silos, ore blend, CWC, steam/chlorine reduction).
* Used SPC six sigma/TQM/Intrinsic Safety/ERP to improve/troubleshoot daily production activities (Finishing/Chlorination, QA/Lab).
* Increased PSM program compliance from 50% to 100% ($300,000 savings by internally developing programs):
* Conducted/revalidated PHAs/HAZOPs (3000+ action items). Sized relief devices (by modeling release scenarios).
* Developed best practices (titanium tetrachloride release reduction, electrical classification/ventilation for fuels).
* Streamlined/enhanced Management of Change/Pre-Start-Up Safety Review/Emergency Response systems.

Mgmt/ESH Consultant at BOISE CASCADE/AMERICAN TAPE, 2nd largest office supply/paper producer 1993-95.
Led, directed, developed, implemented, evaluated & improved ESH/operational best practice management programs.
* $600 million/yr savings by eliminating OSHA violations (2 months ahead of deadlines) for two pressure-sensitive tape facilities.
* $400,000 savings by internally developing PSM/RMP programs using teams. Increased PSM program compliance from 5% to 100% for the pulp and paper mill (60% ahead of 2.5-year timeline).

Mgmt/Process/ESH/Eng. Consultant at JBF ASSOCIATES, largest risk management consulting firm 1991-93.
Led/managed landmark catastrophic $multimillion capital audits, PHAs, & developed/evaluated/improved ESH/PSM/RMP programs for chemical, paper, petroleum, nuclear, & pharmaceutical industry clients.
* Evaluated/enhanced OSHA-dictated PSM programs at various chemical facilities and paper mills.
* Completed PHAs: petroleum product marine terminal HAZOP, hydrogen utility system FMEA, material transfer process fault/event tree/ human risk assessment. Assessed restart capabilities and developed operational safety requirements for several nuclear facilities.
* Developed environmental RMP offsite consequence assessment methods for A.I.Ch.E./specific industrial clients. Published 2 A.I.Ch.E. PSM issue-related papers, 17 reports, and numerous proposals.

Process Engineer at WESTINGHOUSE/DUPONT, largest chemical producer 1987-91.
Led, directed/managed, developed, & started-up $multibillion production facilities.
* Led/directed startup of the $2.4 billion Defense Waste Processing Facility (DWPF). Interacted with EPC contractors. Simulated Salt Process procedures on DCS. Placed the organic waste storage tank in operational order.
* Managed/directed startup of the $150 million Replacement Tritium Facility (RTF). Interacted with EPC contractors. Directed/installed metal hydride beds (one month ahead of 3-month schedule). Redesigned in-bed nitrogen feed system (a vital tritium accountability component).
* Led/directed construction of $7 million Thermal Cycling Absorption Process for the Tritium Production Facility. Communication catalyst: Voluntarily relocated to the production area to keep project going (due to a production personnel shortage). Redirected project plans and scope (increased process scale, redesigned "leaky" aluminum column to stainless steel) to be relevant to RTF's and production's needs. Completed construction turnover. Transferred responsibilities back to production.
* Managed operation of the Advanced Hydride Laboratory, the RTF's $4 million pilot plant. Discovered leaky nitrogen valves and recommended tighter-sealing valves for the RTF ($3 million cost savings). Implemented/ evaluated/documented metal hydride tests/results. Programmed process control system.

Process Design/Development Engineer at ALAMEDA INSTRUMENTS, semiconductor startup firm 1987.
Led/designed novel sulfuric acid and hydrofluoric acid reprocessors for semiconductor industry clients.

Process Development Engineer at CELANESE, largest methanol & 2nd largest fibers producer 1984-85.
Led/managed economic feasibility studies for new/improved chemical production processes. Used process simulation software to support the economic evaluations:
* Investigated using methanol as diesel fuel. Proved coal-processing costs made methanol uneconomical.
* Developed reactive distillation software package. Tested package (for ethylene glycol/polyol production).
* Produced economical Ibuprofen production comparisons for various reaction/feedstock scenarios.

Industrial Intern (M.Ch.E. Thesis) at GLAXO SMITHKLINE, large pharmaceutical/specialty chemical manufacturer 1982-83.
Led/managed a process development study for a new pharmaceutical product (market value: $0.5 million/lb):
* Enhanced membrane fractionation between the product & an excess reactant by selectively binding the product with polymers.
* Developed a thermodynamic model to quantify the product-polymer binding interactions.
* Analyzed experimental results using high-performance liquid chromatography (HPLC) & freeze-drying.

Development Engineer at W.R. GRACE Summer 1982.
Quality Assurance Engineer at DUPONT Summer 1981.

PROFESSIONAL ACTIVITIES
American Institute of Chemical Engineers (A.I.Ch.E.).
American Society of Safety Engineers (ASSE). Former CSP/OHST.
Registered Professional Engineer (P.E.) in Michigan and Ohio.
Advanced Toastmaster/Competent Leader/District PR/President/Area Governor.
Top Secret Security Clearance.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 1873)

Go to Search Parameters...

Brief Description

Mechanical/Manufacturing Engineering, Project/Program Management, Supply Chain Management

A grade electrical licence. Underground communications. Tamrock drill equipment service and fault finding, Flygt pump repairs and maintenance. Ability to read and draw schematics/wiring diagrams. HV switching. Primary/secondary ventilation. Commercial electrical installations. Duty desination.

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

I am a mine engineer.

Computer Technician

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Mechanical Engineering Graduate EIT - experience at underground mine sites, maintenance planning, drafting in autodesk inventor, physical asset management, underground mine hoist ropes and lubrication, scheduling

Instrumentation and Control Engineer

Electrical Engineering, Energy Systems, Power electronics

I am Diploma in Mechanical Engineering. I have adequate knowledge in Auto-Cad in mechanical engineering field. I also have confident experience in X-Steel & SDS2 in steel structure back ground.

Graduate Electrical with Power Electronics

Experienced Reliability Engineer seeks overseas rotational position (i.e. 28/28)

Prevent / correct unsafe acts & condition.

A Mechanical Engineering graduate from NIT/KREC SURATKAL INDIA with over 19 years of experience in mining sector with over 7 years as Head of Maintenance operation in underground as well as open pit mine.Presently working as SBU head with responsibilities including planning,procurement,budget prep.

An enthusiastic professional with proven ability in software development, from inception to sign off. Excellent software development and technical skills, with experience in PHP, MySql, Access, ASP, ASP.NET, VB6, VB.NET, Microsoft SQL Server, Seagate Crystal Reports and other development tools.

Graduate Engineer looking for work in mining or mineral processing industries.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

Area lead designer, PDS ,Microstation, AutoCad, Smartplant review, Peligan Forge Support moduler.

Seeking Chemist, Laboratory, or Quality Control Position

Manager / Engineer ( HW/SW/QA/Training )

Experience with Electrical and Instrumentation & Control Systems design which encompasses project estimating, equipment purchasing, design, build, programming, installation, start-up (commissioning) and field service/troubleshooting for the following: AC motor controls, MCC’s, VFD’s, MOV’s, AOV’s,

Sr.Document Controller

Marine + International Projects Oil & Gas

PE in Mining, Environmental & Civil Engineering with 26+ years experience in surface coal mining management, engineering & environmental. I've held positions up to and including Vice-President of Operations. Well experienced in open pit dragline & truck/shovel operations. Well organized.

I am a Technical Design Engineering of 23 years, I work in a manufacturing company of my country. I am interesed in 3D cad modeling, drafting and simulation/animation product base on CAD/CAM/CAE system (AutoCAD, MecDesk, Solidworks, Catia, Unigraphic, Pro/E, Mastercam, Mold flow, Xsteel, etc)

Managing, organising and participating in geological field studies, drilling and geological testing programAnalysing geological, geochemical and geophysical survey data, well logs and other test results, maps, notes and cross sections, core samples, drill cuttings and rock samples

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Surgical Emergencies :- Road Traffic accident, crush injuries, blunt trauma abdomen,Head injury, liver tear, gunshot, spleen rupture, face injuries, stab injuries, spinal cord compression, assult injuries, burn injuries etc.n Medical Emergencies :Myocardial Infraction, COPD, sun stroke, snake etc.

Corporate Executive in Information Technology with extensive international experience in Systems/Product Architecture (Analysis & Design), Program/Project Management, Business Continuity Disaster/Recovery Planning, Technical Service Delivery & Support, Technical/Operations Management

Troublshooter, computer and networking, electronics, technicial

Drilling and blasting Engineer-

Have exstensive experience, training, and knowledge as an underground coal mine Maintenance Foreman/Electrician in longwall and continuous miner sections. Have excellent electrical, mechanical and hydraulic skills along with welding,cutting, and fabrication skills.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

A seasoned engineering management professional with 11 years experience in petrochemicals, refinery, oil and gas industry in the field of reliability engineering and modeling, pinch technology and heat integration, consequence analysis, utilities modeling, energy efficiency studies , process simuln

Diesel mechanic/ Fitter 20 years mining experience

Computer literate; proficiency in MS office, Excel, Power Point

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Provide technical expertise, guidance and leadership for a variety of designated engineering projects at site.

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

I have a good experience in Plant Modelling using PDMS and knowledge about Pressure Parts & piping Stress Analysis.By majoring in PDMS, I have been exposed to ADMIN, DESIGN, PARAGON, SPECON, DRAFT AND ISODRAFT Modules. And, Iam also involved in creating 4D simulation and presenting of pro

CAD/CAM engineering

I have Excellent technical, communication and interpersonal skills with very good troubleshooting and problem solving skills and ability to work on multiple tasks in a fast paced environment independently and in a team. I can strive to make things work more efficiently and effectively .

Instrument Engineer (Construction) , Site Engineer (Instrumentation), Field Construction Engineer (Instrumentation), 05+ Years Exp., Engineerind Degree in Electronics & Instrumentation

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

I am Electronics and Communication graduate and presently working in Saudi Arabia

Have sound understanding in Geology. Graduate in Geology. Doing Post Graduation(final year) in Geology. Done field work.Computer-friendly.

Mining engineer with strong engineering base, team worker, comunicative, capable for individual work and research. Ready to work on a chalenging jobs, high level of computer litteracy. BSc diploma for mining engineer (5 year studies), currently on post graduate studies of mining.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out