Resume - 7 years diesel mechanic experience

Misco Jobs

Resume #4277

CONTACT INFORMATION:
View contact information...

7 years experience, wheeled vehicle tech./Construction equip.

OBJECTIVE Seeking full time mechanic position. I have worked on vehicles for 15 yrs. as a hobby and 4 yrs. professionally offer hands on experience in field expedient situations. I have experience in running a motor pool for a group support company while in 1 Special Forces Group (airborne). I work well at developing a strong work environment and team cohesion. I work well with others and believe in getting the job done right the first time.

TARGET JOB Target Job Title: Mechanic

Desired Job Type: Employee

Desired Status: Full-Time

Desired Salary: 20.00 USD Per Hour

Site Location: No Preference

Description of my perfect job: To be able to work for a company that believes in team work and building a strong work environment’s place where people want to work and put forth their maximum effort while at work. To strive to get the job done right the first time and not have any work returns.

Career Level Mid Career (6+ years of experience)

Date of Availability: From 1 to 3 months

TARGET COMPANY Company Size: Medium (100 - 999)

Category: Installation, Maintenance, and Repair

Description of my ideal company: A company that is into team building and cohesion. One that cares for there employees on and off the job. A company that has a peaceful work environment and employees that get along with each other to make it a great place to work.

TARGET LOCATIONS Relocate: Yes

US-CO US-OR US-TX

US-WA

WORK STATUS US I am authorized to work in this country for any employer.

EXPERIENCE 6/2001 - Present Waukesha Pearce Ind. Houston, Texas

Class B Mechanic

I work in the rental department for Waukesha Pearce Ind.. My duties are to preform required maintenance on our equipment, undercarriage evaluations, eletrical troubleshooting, hydraulic troubleshooting, body work, hydraulic cylinder rebuilds etc.. On ocassion I will go with a field technician to a customers job site and make repaires to equipment. I have been to the Allied Hy-ram hammer school and the -7 hydraulic excavator school.

8/1996 - 10/2000 U.S. Army Ft. Lewis /WA.

wheeled vehicle mechanic

I have worked as a wheeled vehicle mechanic for the U.S. Army for 4 yrs.. While in the motor pool I would help with maintaining our vehicles and equipment at deployment status. Since 1st Special Forces Group is a rapid deployment unit, we had to be able to load all of our equipment, to include personnel, on either a plane, boat, or both within 18 hours or less. In order for our vehicles to be put on these forms of transportation, they had to be free of any leaks or mechanical defects that would hinder their operation. On a normal day in the motor pool my duties and responsibilities would consist of assisting the operators of the vehicles and equipment with preventative maintenance checks and services or P.M.C.S. for short. Once a month I would give a class on the proper way to preform a P.M.C.S.. In my class, I would explain the importance of having the operators manual with them while they were doing there P.M.C.S.. I would tell them, "how could anyone memorize everything that need to be checked and the way to check that perticular component when I myself as a mechanic could not remember everything for every peice of equipment". When the master driver would hold a class to liscense new troops and to renew liscenses for soldiers, I was often called upon to assist during his calss. The first part of his class is P.M.C.S. which would take up the entire morning. The second portion of the class would be the road test. We would take the new operators on the road to get them aquainted with the vehicle. Once the were comfortable with the vehicle, we would take them off road to show them what the vehicles were and were not capable of. When I was not giving ar helping with a class, I was in the shop working on our vehicles. I would preform services, brake jobs, suspension work, re-seal axles, install block heaters, change tires, replace rear main seals, set timing, minor engine repair, replace flywheels etc.. I was assigned the new FMTV 5 ton wrecker. FMTV stands for Family of Medium Tactical Vehicles. I attended a 40 hour class on the operation and maintenance of the FMTV wrecker and the rest of the FMTV fleet.

6/1995 - 7/1996 Dunn Edwards Sherman Oaks/ CA.

warehouse

I worked in the will call department. I would pull orders and fulfill the work order and deliver it to the customers vehicle or place of work. When I had some down time, I would learn how to match and mix colors. I would give customers advice on wich products would work best for stripping, staining, and cover ups. I would help customers with picking the right tools for the job. Like paint brushes, rollers, or sponges etc..

7/1990 - 9/1993 Bank of America Glendale/ CA

data entry

I would receive checks from couriers and inprocess the branch number they came from and deliver them to the proof operators to be processed.

EDUCATION 6/1999 Sling Load Inspector Course US-Washington-Ft. Lewis

Certification

This school taught us how to inspect the condition of each piece of equipment that was to be used in sling loading of equipment. To make sure and use the right link count, and that the slings to be used were the right ones for the job. We also got hands on, on how to sling load a humvee from a chinook helicopter.

8/1998 U.S.Army Wrecker course US-WA.-Ft. Lewis

Certification

To learn how to operate the FMTV wrecker properly without causing any damage to the wrecker or the vehicle to be recovered. How to judge and calculate how much heavier a vehicle would be depending on the depth and type of earth it was stuck in.

7/1998 Bus Driver School US-Washington-Ft. Lewis

Certification

Successfully completed the 40 hour block of instruction involving operation and maintenance of the 44 passenger bus.

SKILLS Skill Name Skill Level Last Used Experience

Mechanic/Technician Intermediate Currently used 15 years

References will be provided on request.

ADDITIONAL INFORMATION My hobbies are also of which I have gained experience with the following: I have built street strip cars, to include engine rebuilding, ignition upgrades, suspension, and rewiring of vehicles. I have converted drum braking systems to disc braking systems. I have trained in martial arts for 18 years under various styles and instructors. I currently hold a black belt in Tae Kwon Do and have taught for a little over a year. My goal in martial arts is to gain as much knowledge as I can.
I am a people person. I am easy to get along with and I like meeting new people. I like to be challenged on a regular basis, both physicaly or mentally.

I have been awarded the Army Achievement Medal and the Good Conduct Medal.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 1871)

Go to Search Parameters...

Brief Description

Five years of work experience in complementing functional areas such as Design, Manufacturing, Customer Engineering and R&D at large and mid-size corporations in USA and in India providing unique flexibility and cross functional skills

Mechanical and Production Engineer with 20 years of mechanical design, project engineering and management experience in England, Chile, Argentina, Peru, Cuba, Canada, USA and Australia, fully bilingual in English and Spanish.

Mechanical maintenance equipment of all types

I’m looking for a new project.

Experienced in Fertilizer & Chemical Industry, Certified Welding Inspector in certain methods, Skilled in Mechanical Engineering, Professional Automotive Engineer, Bachelor degree and academic study for Mining & Metallurgical Engineering include training and big project with phosphate mines

Well-traveled, young and professionally experienced field geologist. Experience working closely with environmental geologist consultants during pre-feasibility exploration project. International experience with fluency in spanish. Willing to put in long days and learn new and challenging duties.

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

Senior Project Manager, Quality Manager, International experience

Power Electrical Engineer (Power Transformer Designer)

DEGREED MECHANICAL ENGINEER - QUALITY ASSURANCE – DESIGN – SERVICE – TECHNICAL SALES

ETAP Power System, PLC, NEC, ANSI, IEEE, NEMA, IEC, electrical testing & commissioning, Over twenty (20) years of hands-on experience focusing on High Voltage (HV) and Low Voltage (LV) Power Distribution System, project management, electrical engineering design, project coordination and supervision

Master (Mechanical Engineering), Employer, Bechtel Corporation & Exxon Mobil. Experience in I & C Engineer and Mechanical Engineer

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Bachelor of Electronics Engineering ,14+ yrs of experience in designing and commissioning complex programmable logic controller (PLC) based control Systems for Process and Machine automation.drawing tools like AUTOCAD, ORCAD.,SCADA Packages like Intellution-Fix32, Ellipse,

27 years in manufacturing indusrty from panel operator to operations supervisor. Currently employed as a startup and commissioning consultant.

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

Auto Cad

FINAL YEAR MINING ENGINEERING STUDENT, GRADUATING JULY 2002. Predicted to graduate with a first class degree from Camborne School of Mines, UK. Proven acedemic and practical ability. Practical mining experience from employment in South African mining industry.

Graduate surveying student looking for a career in mining.

Mineral Engineering Technologist, 6 yrs experience with International geotechnical consulting firm, Mining Engineering Degree expected 2010

My name is Stephen Ball and I am a Senior Mining Engineer currently working at the Varvarinskoye Mine in Northern Kazakhstan. I have been working in Kazakhstan and Russia for over 3 years now. I am looking for future opportunities in Russia, CIS and other international locations on FIFO rotations.

25 years supervisory experience in the environmental resources field, including regulatory compliance, drainage and erosion control, waste disposal, air and water quality, habitat protection, reclamation and post-mining land use, and the general mitigation of impacts from industrial operations.

I have 10+ years of geological experience undertaking mineral exploration projects for precious metals (epithermal), base metals (Porphyry and VMS), diamond (alluvial and kimberlitic) and uranium deposits (Carbonatite and unconformity related).

# Self motivated # Self challenged # Good communication skills # Open to new relationships # Computer Skills: Windows, MS office application

I am a young mining graduate (with first class marks) with hands on training in different mines such as manganese and coal with workable knowledge of computers.

B.tech in mining engineering. Objective To excel in the field of mining and excavation.

Mechanical Engineer with solid technical and managerial experience in maintenance areas for mining and petroleum international companies. With proven leading skills oriented to implement, improve and maintain best practices to reduce and eliminate any source of loss related to safety and production

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

Licensed Professional Engineer registered in British Colombia and Alberta, and able to be registered in other Canadian, U.S. and international jurisdictions.

Mechanical Engineer, Static Equipment, Pressure Vessel, Heat Exchanger, Tank

Geologist/Exploration geologist

Operations, Technical, Contract, Leadership, Surface, Underground, & International Experience

December of 2009 Graduate of mining engineering seeking full time postion.

15 years experience of Finance Analysis, Cost Control, Finance Reporting and Internal control experience / OIL AND GAS INDUSTRY ‘ KEY PERFORMANCE INDICATORS - KPI expert performer and designer.

Metallurgical assayer; national Certificate in metallurgical assaying; Cambridge Board advanced and ordinary level Certificate

HSE Learning/Development Professional seeking position in an industrial setting.

Material Controller with 4 year experiance

PROFILE : Geologist engineer looking for a position in mining exploration, planning and deposit modelling. Wishing for mobility.

Prefer production orientated role in senior position, or with progression into senior role. Development of systems/procedures for bulk commodity project. Mentorship of direct reporting staff. Reconciliations. Familiar with Vulcan, Surpac, and AcQuire

Mechanical Engineer, EIT

I have a wide on and offshore range of experience in heavy equipment installation, commissioning and maintenance. Managing and supervising day-to-day preventive maintenance.

Completed B-Tech Mining Engineering at Wits Technikon (now University of Johanessburg) South Africa in 2004. Completed one year of underground diamond mining to obtain a permanent blasting certificate, and have 3 months underground gold mining exp. Since completing, have worked in Planning&Projects.

7 years diesel mechanic experience

Qualification- Graduation in mining engineering(B.E.,) Experionce- one year field experience in lime stone mining

I would like to work in IT department to give the company from what I gain experiance and knowledge

PDS, Micro Station, AutoCAD

Recent graduate of mining engineering with 2 years experience in underground hard rock mining.

Underground Miner/Equipment Operator

Post Graduate in Soil Mechanics and Foundation Engineering, professionally qualified Geotechnical Engineer having about TEN YEARS of work experience. Mr. Madan Kumar has comprehensive knowledge and vide experience of consulting services as a Geotechnical Engineer

CAD DRAFTSMAN

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out