Resume - Being a Technician for 17 years and 13 years of it is in oil and gas sector. As...

Misco Jobs

Resume #61484

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE: Seeking for Natural Gas/LPG Technician/Supervisor post (Pipeline/Metering Station). Both on-shore and off-shore.

PREFERRED WORKING STYLES: Enjoy working individually or in a group, whichever is required of my skills.

SOFTSKILLS QUALITIES:Possess interpersonal diplomatic skills, friendly, easily adaptive and active in extra-curricular activities. Outgoing and ambitious. Willing to experience new challenges and acquiring more knowledge. A diligent person who takes pride in his work.

PROFESSIONAL EXPERIENCES __________________________________________________________

Company Name: Gas Malaysia Sdn. Bhd Title: Senior Technician in Operation & Maintenance Department
Date Joined: 1994 Date Left: Present
RESPONSIBILITIES:

1.NATURAL GAS (NG) AND LIQUIFIED PETROLEUM GAS (LPG) STATION (METERING STATION)* Conduct regular station inspections for any abnormalities and to ensure gas station and its facilities are in good condition. Station inspection include district station, service station, area station, NGV station, residential regulator station, odoriser stations, LPG bulk station and LPG manifold station. This inspection will assess on supplies pressure inlet and outlet, regulator, filter pressure differential indicator, gas meter etc.* Perform switching over dual run station, to test on critical device such as slam shut valve, monitor and worker regulator, pressure relief valve (PRV/PSV ) etc. Presently, controlling about 400 NG station, 70 LPG Bulk Tank Station, 300 manifold stations and more than 30,000 residential in Klang Valley.* Lead a group of technician to service or troubleshoot on any emergency work occurred in the gas station. Expert in servicing and operating of gas regulator such as Bryan Donkin, Instromet, Tartarini, Fisher Controls/Francel etc. The system is currently using is Slam Shut Valve, Monitor/Worker regulator, OPSO and Relief Valve concept.

2.NATURAL GAS (NG) AND LIQUIFIED PETROLEUM GAS ( LPG) PIPELINE*
Responsible for the natural gas feeder pipeline (360psi) after regulated down from 700psi at city gate stations, distribution line (60 psi) and service line (5 psi) before supplying to industrial, commercial and residential areas in Peninsular Malaysia. Currently, my accountability is to supervise and monitor nearly 100km gas pipeline steel and PE pipe of several gauges laid underground of Kuala Lumpur city center i.e. from NPS 2" to 16" of steel pipe and from 20mm to 125mm of PE pipe. * Plan and execute pipeline inspections to assess any indication of potential leakage or malfunction and abnormality of the gas distribution system. Implemented a systematic approach to detect any third party activities in the vicinity of the gas facilities.* Monitor Cathodic Protection (CP) data (corrosion control-sacrificial anode type) for every 6 months to check on current flow through anode/magnesium.* Inspection on Insulation Joint (IJ) and Spark Gap performance to ensure that the CP current does not flow to the aboveground gas station and cause undue depletion of anode. To protect insulation flanges sets and pipeline from lightning strike and fault current.* Inspect all pipeline steel and Polyethylene (PE) valves for its gear box/actuator, valve seat/body greasing and the chamber condition as well. Sealant activity is required if there is symptom of leaking at the valve through cavity point.* Perform pipeline leakage surveillance activities to identify any gas leak along pipeline route by using mobile detector such as FID, CGI, OMD ( optical methane detector – mounted to vehicle ) etc.* Conduct tracer wire exercise to enable buried PE pipe to be located as well as steel pipe which normally used if there is a trial pit activity by third party. Competent in using various wire locator types such as Radiodetection, Heath, Fujitech etc.* Establish pipeline integrity management as guidance to monitor and assess the effectiveness of the Sacrificial Anode Cathodic Protection system, pipe coating and corrosion The mandate is to ensure the integrity of the pipeline running under and aboveground along the route. Presently, pipeline current mapper equipment is used for the purpose.* In-charge of odoriser stations where odorant is added into gas to give strong smelling material which gives a destructive warning odor to Natural Gas in order to alert of gas leaks. Conduct odorant intensity level check at the user end and to standardise level odor (1 over 5 o the lower explosion limit).* For LPG pipeline which transporting 5 to 10 psi gas pressure and normally using MDPE pipeline to the residential area similar activities being taken to avoid any interruption of the gas supply. This system is using manifold cylinder 50 kg and bulk tank of capacity 1000 liter to 32000 liter.

3. OTHERS TASK* Being an on-call personal technician on rotation monthly basis to respond for any emergency work after office hours. Need to be a first responder to arrive at site within 45 minutes.* Involve in pipeline and station commissioning on the new project upon completion, this activity related on N2 injection, purging, flaring and gas volume detection.* In charge on small section of LPG stocks control which is duty to check on stock balance at site. Manage on stock check, order and receiving activity for LPG cylinder manifold and bulk tank system. Assign personal to receive stock at site and ensure all instruction and procedure to be complied. Emphasize on safety concern especially during LPG refilling by tanker.* Responsible on office files and drawing management which covers entire NG's and LPG's handover document including its content. To ensure the entire important item such as as-built drawing, ATI, ATO, manual kept accordingly and comply with internal SOP procedure.

PROJECTS:1.
LPG Bulk Tank Re-qualification works*
Involved on LPG bulk tank re-certification project which required for inspection after 12 years of the tank-manufactured year and every 7 years subsequent to the first recertification year.* Every year we did conduct 2 to 4 tank for this project and took three months to complete eg.Vista Kiara Condo, Vista Kiara, De Tropicana Condo, Sri Tioman flat etc.* To ensure all contractor works shall comply with Malaysian Code and Practice MS 830: 1984, MS 930: 1986, Gas Supply Act 1993, Gas Supply Regulations 1997, MS 641 and the relevant specifications referred herein. * To monitor fabrication to supply temporary manifold during activity.* To monitor and conduct de-commissioning of bulk tank (flaring and zero gas)* To monitor and conduct disconnection all fitting and piping.* To monitor and conduct entry into confine space (bulk tank) for internal cleaning.* To conduct and verify inspection of thickness gauging (approved by JKKP and prepare for NDT contractor).* To monitor and witness pneumatic test (with JKKP)* To conduct functional test.* To monitor painting and tagging activity * To monitor and conduct re-commissioning.* To monitor disconnection all fitting and piping at temporary supply system

OTHER PROJECTS:1. Hot Tapping For NGDS to PETRONAS NGV at Segambut. Hartamas, Kuala Lumpur City Centre, Malaysia, etc.2. Hot Tapping For NGDS ( Relocation )at Shapadu Highway/ Meru, MalaysiaSupervise and witness of all the activities of hot taping from the safety, exposure and examination of pipeline, fit up of split Tee, welding of split saddle and inspection (MPI, RT and UT), pressure testing, perforation and line commissioning to ensure follow the Approved hot taping procedures. Comply with ANSI/ASME B31.8 and API 1103. Mass Balancing at restoration area of LPG SystemThis exercise was conducted due to imbalance profit getting compared to expenses. Potential of leaking especially in the aging used pipeline may contribute gas loss along the way. So that manages a group of technicians to conduct pressure testing and excavation to find out the gas escape point and to repair it immediately.

Company Name: Sapura Telecommunications Sdn. Bhd Title: Technician in Installation Department
Date Joined: 1992 Date Left: 1994
RESPONSIBILITIES:* Installation and testing of telecommunication cables and switching equipment for private building. This private exchange (PABX) using Northern Telecom of Canadian Technology and also required traveling trough out Malaysia. I was involved on all PETRONAS Building and plant such Gas Processing Plant 1&2, Refinery plant at Paka Terengganu, MNLG Bintulu Sarawak, PETRONAS HQ at DayaBumi of KL, OGP& Carigali Offices for the telephone line problem.

Company Name: Pernas NEC Sdn. BhdTitle: Technician in Installation Department
Date Joined: 1991 Date Left: 1992
RESPONSIBILITIES:* Installation of telecommunication cable and switching public exchange equipment for Telekom Malaysia with capacity up to 20,000 lines. This public exchange using NEAX system of Japan Technologies and took 2 weeks to 6 months to complete. This job also required traveling trough out Malaysia country.

COURSES ATTENDED _______________________________________________________________________
Between 1994 to 20061993
GAS MALAYSIA SDN BHD* Safety and Emergency Response in house course*
Cathodic Protection, Theory & Data Interpretation in house course*
Introduction to Natural Gas course at INTEKMA*
Properties and Hazard of Natural Gas course at INTEKMA*
Introduction to Steel and P.E Pipe course
Material Inspection course at INTEKMA*
Construction Practice course at INTEKMA*
Regulator Principle of Operation course at INTEKMA*
Regulator Station Acceptance Test *
Regulator Overhaul and Troubleshooting*
Regulator Principles of Operation*
Piping Problem*
Introduction of Cathodic Protection*
Steel Pipeline Emergency repair work.*
Hazard Identification Risk Assessment and control – JSA Training*
Defensive and safety driving Trainings*
Accident / incident investigation and Reporting.SAPURA TELECOMMUNICATION SDN.BHD*
Basic communications course at Singapore ( 2weeks )

EDUCATION__________________________________________________________________________________
1987 ~ 1990
MARA University of Technology,Shah Alam, SelangorMalaysia(School of Engineering-mechanical)Attended until Third YearUpper
Secondary Science School,Teluk Intan, PerakMalaysia.(Malaysian Certificate of Education: Grade 1)
Methodist English Secondary SchoolTanjong Malim, PerakMalaysia.Lower Certificate Education: 7A

TECHNICAL SKILLS & KNOWLEDGE ____________________________________________________
Competant Class 2 Natural Gas Fitter
Authorised Gas Tester by NIOSH (Confine Space Entry)
Chairman of Technical Safety Committee (Four Years)
OTHER SKILLS:Public Speaking, Project Management

EXTRA CURRICULAR _______________________________________________________________
Football Player for ClubJungle Trekking, Hiking.

LANGUAGE ABILITIES ______________________________________________________________________
Malay (native) English (fluent)

REFERENCES __________________________________________________________________________________
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 1874)

Go to Search Parameters...

Brief Description

Young Mining Engineer (short experience in geophysics - jr Observer, HSE Officer, and coal mines - trainee)

I'm a P.Geo with a B.Sc. Hons in Geological Sciences and 5 years experience (dominantly exploration), varying from core logging to project planning. I set high standards for myself and I work extremely hard to complete anything I set out to do. I'm organized and I pride myself on perfection.

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

To secure a full time Mechanical Engineering position in which I will utilize my technical and interpersonal skills to further the company and myself.

young and energetic graduate with professional experience in Land Surveying

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

COMPUTER SKILLS, AND CAPACITY TO DO WORK WITH EVERY KIND OF PERSON

PLC, HMI, C/C++, PHP, JAVA, mySQL, microcontroller, Embedded, Firmware,DSP

I have 5 years as a Cad Designer using Inventor 3D and AutoCAD

Planning/Schedule Engineer,Maximo IMplementor,

Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development

I am a multiskilled candidate with more than two years experience. I have acquired Engineering as well as Business Education. I am fully convesant with Corrosion Prevention system for Underground pipings, API 650 standards for tank design and HSE standards.

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Having Cement and Pharma R&D Experiences, I would like aquire a career in the same feild. My Skills includes that,I can work with part of team or indepentantelly. Fast decision making, analytical skill.

Being a Technician for 17 years and 13 years of it is in oil and gas sector. As Senior Technician in one of MNC company in Malaysia I believe with my skilled and knowledge in Operation and Maintenance field can contribute some value to the future company. Expert in Gas Station and pipeline monitori

Project Controls/Sr.Planning/Project Engineer

Confident to handle the construction and quality control activities as specified in the Drawings and applicable standards and specifications.Familiar with Material Inspection, dimensional check and documentation as per Construction Materials Standards such as ASTM / ASME SA 106, SA 515, SA 516etc.

Specialist in Telecom looking for a job in CIS

Diplom engeneering geology with one year of experiance in break water

Im currently an engineer in ghana in africa for a caterpillar dealership working mainly on power generation all over ghana including 2 mine sites. My duties include breakdowns servicing and maintenance and major overhauls . I also teach locals and supervise them .

Biomedical Engineer

Electronics, electronics of power, electromagnetic compatibility and signal processing , NDT, reliability, maintenance, instrumentation, sensors

EPC/EPL Manager, Rehab & startup projects. Polished broad based o/seas tech & mgmt skills

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

A self-motivated Reliability Engineering with experience in cement industry, indonesia

Safety Health & Environmental advisor, HSE advisor, consultant, russian turkish speaker

Experienced Underground Blaster w/ 13 + years Experience in Construction/Quarry

Geologist

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Analitical, discipline, hard working, easy to learn, able to operate computer such as Microsoft windows, office, AutoCad, Photoshop, CorelDraw, Internet and maintenance computer

Associates Degree in Electronics Technology. No work expierience, graduated in 12/06. Ready to work!

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Rigger crane op scaf

Power plant engineer involved in a variety of power plant equipment design and commissioning.

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Six Sigma,Lean manufacturing practices,Capacity planning,Line balancing,Human Factors

Metallurgical Engineer Fresh Graduate, Metallurgist

DBA database administrator oracle, system analyst, programmer

Project Planning and Management, and Procurement / Purchasing

Human Resources, Project Management, Training, Engineering

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

I am a target oriented, highly motivated, hard working and communicative person, I have Leadership skill, I am speak English. In addition to the above qualification, I am also familiar with computer program and have the ability to work in team. I have an Experience In belt system maintenance and equ

Graduate chemical engineer (The University of Queensland), hardworking, quick learner and eager to learn with excellent communication and project & time management skills.

Mechanical technician - rotating equipment, pumps, compressors, heat exchangers, gas, petrochemical industry, valves offshore survival BOSIET. Hazardous area

I am a Diploma Holder specialized in Petrochemical Engineering seeking for a job(fresher).I am here with my bio-data for your kind perusal and I am request you to give me a chance for training in your esteemed organization,I will be grateful.

NDT

Chemical Engineer. 2 years experience in minerals refinery and processing plant with BhpBilliton Nickel West - Australia. Responsible in production on day to day basis. Familiar with pumping, mass and energy balance, hydromettalurgy, ball mills, hydrocyclones, Hysys, LNG, Gas sweetening process.

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out