Resume - Planning, designing and project management (construction) of coal processing pla...

Misco Jobs

Resume #65862

CONTACT INFORMATION:
View contact information...

2) DATE OF BIRTH - 5th November, 1964
3) PRESENT POSTING - Coal & Mineral Preparation Division,
Central Mine Planning & Design Institute Ltd. (CMPDIL), Ranchi, India
4) NATIONALITY - Indian
5) KEY AREAS OF SPECIALISATION
- Design and selection of equipment for coal beneficiation plants, Coal Handling Plants (CHP) and Mineral beneficiation plants.
- Design, development and optimization of coal preparation plant and Coal Handling Plant flowsheet.
- Erection & commissioning of coal preparation plants, Coal Handling Plants. Project management and supervision, conducting of trial run, guarantee tests etc.
- Tendering, Bid evaluation, procurement and other Bid process Management activities.
- Preparation of Techno-economic feasibility Reports (TEFR), Detailed project reports, Master plans, Tender documents, Capital cost estimates, Financial analysis for projects.
- Preparation of general arrangement and detailed drawings for CHPs, coal preparation plants and other mineral beneficiation plants.
- Plant study for modernization and upgradation of existing coal preparation plants and CHPs, suggestion of corrective measures for improvement and their implementation. Plant optimization studies.
- Laboratory analysis/ testing and practices on coal. Coal quality control and clean coal technologies.
- Research & Development activities in modern coal beneficiation technologies.
- Design and project management in Manganese ore beneficiation plants

6) KEY QUALIFICATION - B. E. IN MECHANICAL ENGINEERING
- M. TECH. IN MINERAL ENGINEERING
7) PROFESSIONAL EDUCATION
i) Bachelor of Engineering (Mechanical) in 1986, First Class (Hons) from National Institute of Technology, Durgapur, India ii) Master of Technology (Mineral Engineering) in 1998, First Class (Distinction) from Indian School of Mines, Dhanbad, India

8) WORK EXPERIENCE & MAIN JOBS DONE
- Management Trainee (Aug'86 to July'87) in ACC-Babcock, Durgapur: Training in design and fabrication of power plants equipment
- Executive Trainee (July'87 to Oct'87) in National Thermal Power Corporation (NTPC): Training in power plants
- Junior Executive Trainee & Engineer (Oct'87 to Jun'97), CMPDIL: On-job training in Detail Design, Process engineering and Russian norms on coal preparation by Russian experts of M/s Giprosackth, Leningrad
Design, drawings and construction supervision of Kathara washery modification scheme as per Altekar Committee recommendation
Design, drawings and construction of the oversize restriction plant at Kathara washery
Erection of equipment, stores management, managing site engineers and staff, handling of labour and local issues, and commissioning of Kedla washery and its Coal Handling Plant during its construction phase
- Executive Engineer (July'97 to Mar'98) & Senior Executive Engineer (April'98 to Jul'01), CMPDI: Studied M. Tech at Indian School of Mines, Dhanbad under the sponsorship of CMPDIL
- Senior Executive Engineer (Jan'99 to Jul'01) in CMPDIL: Preparation of Feasibility study and Project Report for Sarshatali coal washing project, ICML
Preparation of Tender document for Patherdih Low Volatile Coking Coal (LVCC) washery
Field study of various technical, operational, managerial and other issues and suggestion of corrective measures for the stabilization and improvement of Madhuban washery
Preparation of Feasibility Report & Project Report for setting up of a coal washery at Amlori for Rihand, NTPC

- Superintending Engineer (Aug'01 till date), CMPDIL: Preparation of Feasibility Report & Project Report for Manganese Ore Beneficiation Plant at Balaghat, M/s MOIL
Preparation of Tender Document for M/s MOIL
Tendering, price negotiations, award of work, contracting and construction management of the MOIL plant at Balaghat.
Preparation of modification schemes for following CCL & BCCL washeries:
i) Sawang ii) Kathara iii) Patherdih iv) Madhuban
Recommendation on beneficiation technology for Sarshatali Coal Washing Project, ICML
Preparation of Techno-Economic Feasibility Report & Project Report for proposed Dhori Washery in Dhori area, CCL
Preparation of Tender document for Dhori washery
Capacity assessment of Dipka washery of M/s Aryan Coal Beneficiation Pvt. Ltd. (ACBPL)
Capacity assessment of ST-CLI washery of M/s ACBPL, Dipka
Process Design for proposed Parej Washery and techno-economic feasibility study
Identification, formulation and negotiation for joint venture projects for Indo-US coal working group

9) JOURNAL & CONFERENCE PUBLICATIONS

THESIS: "Comparative effectiveness of different beneficiation techniques for upgrading Indian coking coal fines"

PUBLICATION: i)"Studies on comparative effectiveness of different beneficiation techniques for upgrading Indian coking coal fines" - abstract volume - National seminar on mineral processing technology – perspective for new millennium", April, 4 – 6, 2000.
ii) "Strategy to meet coal requirement for power plants linked to MCL" – National Seminar on Beneficiation of coal and Minerals – 2000, organized by MGMI.
iii) "Application of Mozley Mineral Separator for treatment of coking coal fines" – International Seminar on Mineral Processing Technology, MPT-2006, March 8-10, 2006.
iv) "Washability Indices and comparative effectiveness of a new coal washability Index, NGMI" –MGMI Seminar, FIMI 2004. 17th & 18th Sep'2004, Kolkata.
v) "Kyoto Protocol and India's opportunity to develop Clean Coal Technologies through Clean Development Mechanism" – Geominetech Symposium, Bhubaneswar, 11 – 12 May, 2005.
vi) "Integrated flowsheet design for a Manganese ore beneficiation plant for MOIL", 1st Asian Mining Congress, Kolkata, 16-18 Jan, 2006
vii) "Coal Preparation in India – Constraints and opportunities" – MPT-2007.
vii) "A case study-Techno-economic feasibility for installation of 2.5 MTY coking coal washery at Dhori washery at Dhori area, CCL" – 2nd Indian Mineral Congress, IMC-2007, ISM University, Dhanbad viii) A comparative study on status on coal beneficiation in major coal producing countries, Indian coal beneficiation scenario & Economics of using washed coal – Presented in Asia-Pacific Partnership meeting, 22-24th August, 2007, IICM, Ranchi

10) COMPUTER SKILLS
* Programming Language: BASIC, C, C++, VB
* Application Packages: KOYLA, DMCYCLONE, REALJIG, AUTOCAD etc.
* Associated with development of a GUI based simulation package KOYLA for coal preparation plant flow sheet design and simulation

11) OTHER ACTIVITIES
i) Deliver guest lectures on Mineral beneficiation machinery in the Deptt. of ME & MME, Indian School of Mines, Dhanbad.
ii) Set question paper for the M.Tech students of Indian School of Mines, Dhanbad on the subject "Bulk Material Handling"
iii) Take regular classes at Indian Institute of Coal Management, Ranchi on different topics of Coal Preparation and Bulk Material Handling.
iv) Received appreciation from NTPC for preparation of TEFR for setting up of a washery in Amlori, NCL.
v) Received appreciation from MOIL for successfully presenting the TEFR for MOIL in front their Board of Directors in May 2004.
vi) Received award for Best Technical Paper for "Kyoto Protocol and India's opportunity to develop Clean Coal Technologies through Clean Development Mechanism" in Geominetech Symposium, Bhubaneswar, 11 – 12 May, 2005.
vii) Member of "The Mining, Geological and Metallurgical Institute of India" (MGMI)
viii) Attended Technology Transfer Project on "Clean Coal Technology" in Tokyo, Japan in Nov – Dec ' 04.
ix) Attended Indo-US coal Working Group Meeting (part of Indo-US Energy Dialogue) in Washington DC, June 5th – 7th, 2007 and finalized some joint project proposals to be executed jointly by CMPDIL & Department of Energy, USA

12) REFERENCES
Will be provided

13) OBJECTIVE

My objective at this stage of my career is to find a suitable job in a reputed EPCM company, preferably in a major coal producing country in the world, where I can work within a large group involved in macro-level planning, process designing, detailing and construction of coal preparation & Handling plants, Mineral processing plants etc. I am also ready to lead a team in a specific working area of a EPCM company involved in similar projects.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1719)

Go to Search Parameters...

Brief Description

Free! Project Manager with 19 years of hands on Experience of Executing Green field project of Hydro & Pyrometallurgy-Zinc, lead & Copper, Cu SX & EW, Cobalt SX &EW, Leaching & Flotation plant, Copper Smelter. Transmission lines, HT & LT motors upto 7700KW, VVVF upto 5MW, Hot & Wet ESP's.

Free! A certified professional coal geologist with over 15 years of domestic and international experience in exploration and mine production. Also have 10 years of management experience in the manufacturing sector

Free! Experienced Safety engineer, CSP. Bilingual Spanish/English. Authorized to work in the European Community.

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

Free! Master Electrician with 26 yrs experience in the construction field

Holding Ph. D degree in Hydrology, MSc in Geophysics, long term research experinece in groundwater as well as surface water hydrology such as; groundwater investigations, water quality assessment, groundwater monitoring, watershed modeling etc

TV received B. S and M. S both in mining engineering and specialized in mining systems and rock mechanics during his graduate research work at the University of Utah. He worked in the U.S and other mining industry for more than 20 years. TV worked with Allied Chemical Corporation, Atlantic Richfield

Geotechnical Engineering and Research and Development Manager

A mining Engineer having 30 years Experience in Metal Mines in India - Under Ground and Open Cast Mines - First Calss Mines Manager's Certificate - Date of Birth : 04.11.1954. Qualification : (1) Diploma in Mining From School of Mines Mines, Kolar Gold Fields,

engineer metallurgical

Geologist. Sedimentary - coal, uranium, alluvials; igneous - iron, industrial minerals, some gold. Due diligence, Feasibility, Project generation, Mine development, Technical audit, Exploration management. Experience in Australia, SE Asia, FSU. Innovative solutions for complex geology and grade.

Experienced Geologist with Environmental Management Background

Planning, designing and project management (construction) of coal processing plants, coal handling plants and mineral processing plants

Mining Engineer Over 21 years of engineering design, research, planning and supervision experience in mining and energy industry.

B.Sc Engg(Electrical)+MBA(Finance), 25 exp as electrical engineer in mechanised open cast mines and Power Sub Station wiht excellent performance.

Generate Excellence in the area of Non-Ferrous Metals & its derivatives recovery with a strong commercial perspective.

Has more than 20 years of broad experience as a geologist in gold mine in both open pit and underground.

Experienced in western coal fields and civil design CAD software.

cat , cummins , longyear , tamrock , gensets , hv , hydraulics , welding , electronics , computer , underground , uranium mining , field service

Production oriented ,good hand on computers and like to work within the team .

Graduate Mining Engineer (India) with 20 years experience of mechanised coal mine and ample knowledge of computer & electronics. Special knowledge of Mine Monitoring System & Mine Communication System

I have a degree in Mineral Processing and have worked in Angola ,South Africa, and Zambia.I am experienced up to asst hod level,and have run my own engineering business for 15 years.I have worked with Diamonds ,Gold,and Base Metals.

ELECTRICAL ENGINEER SUPERVISOR SPECIALIST SHOVELS AND DRILLS

Graduate of Colorado School of Mines, BS Mining Engineering (First in Class 1998), experience in surface and underground mines as well as construction management. Looking for a position of responsibility in operations or engineering with a mining company or large underground construction company.

A Mining Engineer for 27 years with experience of 14 conceptual and 120 detailed engineering designs as Chinese Registered Mining Consulting Engineer and P.Eng in the process BC, Canada.

Mining Engineer. Management of costs and Budgets. Application of methodology PDCA of Deming. Selection of Mining Equipment. Handling of Explosives. Management of Contractors. Application of the Environmental Standards and Normative

Mechanical Engineering Graduate, 11 years in a mine, 9 years in Mine Planning and Design Institute

Mining engineer, still on the job at Anglogold Ashanti Ltd as mine planning engineer. I have been working in the company since march 1991.

Process economist for complex chemical and metallurgical processes

Qualified Drilling Engineer ready to work in any Diamond Drilling Company

An experienced industrial minerals processor with vast knowledge of kaolin and talc processing. Work experience include 10 years in R&D (process and new product development) and 10 years in academia. Looking for the right opportunity outside the USA and Canada.

SCADA Engineer. Computer Technologist

Chemical Engineer 25+ years experience in SCADA / PLC based Control Systems

Preliminary Project Evaluation and Planning,, Process and Flowsheet Development,m Process Equipment Sizing and Design , Plant operation & Commissioning , Continual Technical Support to Marketing

Exploration Geologist

Prospecting and exploration of mineral deposits, calculation of reserves and resourses, managment of exploration department

Twelve years’ experience in Base metal Exploration, Evaluation and Mining

Aircraft electrical maintenance field

I am a Geologist with an experience of over 23 years in Mineral Exploration,Mine Development and Environmental Studies.

Maintenance Supervisor /Maintenance Planner

Preliminary Project Evaluation and Planning,,Process and Flowsheet Development,,Process Equipment Sizing and Design, Plant Commissioning Assistance,Continual Technical Support to Marketing

Operating Systems: Windows XP, Windows 2000, Windows 98, UNIX, OS/2, DOS. Programming Languages: C, C++, Visual Basic .NET, Visual Basic 6, HTML, XML, Visual Studio development environment. Databases: SQL Server, Microsoft Access. University of Teesside: MSc Information Technology, BSc Mathematic

GEOLOGIST WITH A WIDE EXPERIENCE IN MINING EXPLORATION

MINE PLANNING AND PRODUCTION

Computer literate in Microsoft Word, Excel, MS Project and basic knowledge in Auto CAD, Promine and GEMCOM mining software.

Heavily involved in strategic planning and supporting business improvement initiatives. This experience combined with past exposure to managing teams, working in a variety of different contexts and at various levels of an organisation.

Sr. Geologist / GIS Analyst / Mine Geologist / Structural Geologist

22 Years of experience in Granite and Minerals Industry. Project Head and Managerial cadre experience.

Almost twenty years experience in both surface and underground mining in Ghana, Africa.

Sectional Surveyor at Lonmin Platinum - Certificate of Competancy for Mine Surveyors - Leica, Trimble and Topcon instruments - Autocad, stopecad, ModelMaker, Microsoft office, Microstation, LGO, TGO softwear - 20 years as Surveyor

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out