Resume - Degree Obtained: BTech Degree Extractive Metallurgy Engineering (2006), Regist...

Misco Jobs

Resume #66029

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Institution: Tshwane University of Technology
Bridging Course: Laboratory Assistant (1999)
Certificate Achieved: Certificate in Laboratory Assistant (2000)
: Certificate in Comprehension and Reading Skills (2005)
Diploma Obtained: National Diploma in Metallurgy Engineering (2005)
Degree Obtained: BTech Degree Extractive Metallurgy Engineering (2006)
Institution: University of Pretoria (2007)
Registered Degree: BSc (Honours) Applied Science Metallurgy(2007-2009)
Majoring Subjects: Project Management, Hydrometallurgy, Mineral Processing and Research Methodology

OBJECTIVE:
------
I want to gain a challenging entry-level in competent Engineering position in one of the big companies that utilizes production planning, operations and process management and believe it will assist me in reaching my career objectives.------

WORK EXPERIENCE:
------------
.October 2007- to date: Exxaro Resources Pty Ltd
Position: Professional In Training (Metallurgy Engineer)
Duties
* Product and process research for Heavy Minerals, Coal, Zinc, Dense Medium.
* Create Project Charter, plan testwork resources, execution of teswork, and report writing.
* Liaise with project leader on projects objectives and execution.
* Draw up test work procedures/flow sheets pertaining to the particular sample to be tested, as well as the required equipment and conduct or supervise test work.
* Liaison with other divisions on obtaining samples for testwork.
* Liaison with equipment and chemical suppliers on correct requirements for each project requirements.

March 2006 – September 2007: Multotec Process Equipment Pty (Ltd) based at Kempton supplier of Magnapower Magnetic Separators
Position: Technician
Duties
* Liaise with Divisional Manager/Senior Process Engineer and/or client regarding test work on Magnetic Separators.
* Draw up test work procedures/flow sheets pertaining to the particular sample to be tested, as well as the required equipment and conduct or supervise test work.
* Submit samples for analysis to the relevant client or laboratory.
* Evaluate the results, do mass balances and prepare flow sheets from the results obtained.
* Compile reports for the client complete with recommendations and findings of the test work.
* Liaise with clients, set up equipment and train mine personnel if required, to conduct the test work.
* Commission equipment on site and Application Research
* Identify new and expansion projects from local and international mining and metallurgy industry and equipment selection for application
* Improvement of existing products and Development of new products where appropriate.
* Product and process research and Implement SOP for Magnetic Separators

In-Service Training (P1) and (P2)
October 2003 – October 2004: Refraline Pty (Ltd) based at Assmang – Machadodorp and Samancor Ferrometals – Witbank
Position: Trainee Refractory Engineer
Duties
* Monitoring and adjusting the refractory parameters for optimal operation, which included time studies and trials on monolithics, alumina-bricks, furnace lining bricks including BOF, parting agents, gunning materials, runner tip and granulation precast shapes
* Monthly monitoring furnace electrodes sealing procedures and systems used.
* Monthly Reports on Ladles Life-cycles and Assisting the Plant Manager with Ladle Management documentation.
* Stock Management and Supervision and Periodic Cost Analysis and benefit capturing.
* Participating in the Institute of Refractory Engineers for research studies conducted and benefits capturing.

EDUCATION & CERTIFICATION:
------------
School: Prospect Senior College
Certificate: Matric
Subjects: Zulu (HG), English (HG), Afrikaans (HG)
Mathematics (HG), Biology (SG)
Physical Science (HG), Geography (SG)
Achievements: Best Student in Mathematics
Awards: Jet-Plane trip around Pretoria Award
Activities: SRC Member
TERTIARY
Institution: Tshwane University of Technology
Bridging Course: Laboratory Assistant (1999)
Certificate Achieved: Certificate in Laboratory Assistant (2000)
: Certificate in Comprehension and Reading Skills (2005)
Diploma Obtained: National Diploma in Metallurgy Engineering (2005)
Degree Obtained: BTech Degree Extractive Metallurgy Engineering (2006)
Institution: University of Pretoria (2007)
Registered Degree: BSc (Honours) Applied Science Metallurgy(2007-2009)
Majoring Subjects: Project Management, Hydrometallurgy, Mineral Processing and Research Methodology

ADDITIONAL INFORMATION:
SKILLS
* Interpersonal and Communication skills
* Attaining objectives through teamwork processes
* Work independently
* Report writing and Presentation skills
* Computer literacy – Microsoft Word, Excel, PowerPoint
* Project Co-ordination – During this period I learned to organize resources for project start-up, planning, testwork, data analysis, and report writing.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 1734)

Go to Search Parameters...

Brief Description

Engineering Maintenace Management, Project Management, Production Management

Technical and Operations Experience. Currently Long Range Planner / Dispatch Engineer. BEng educated at Laurentian University School of Engineering in Sudbury, ON, Canada. I am looking for advancement opportunities, in a fast-paced and team-oriented workplace.

Exploration Geologist

I am a CWI, Level II in MT, UT, PT and RT film interpretation. I have US and overseas QA/QC project and manufacturing supervisory experience in the construction, petroleum, mining and aerospace industries. References and copies of certs. will be provided upon request.

I am a qualified Mining Engineer with 3 years of practical experiance undertaking various short term planning roles including; dragline engineer, production engineer and drill & blast engineer as part of Rio Tinto's Australian coal operations

two national publications, one international presentation and one national presentation.

Condition Monitoring Management Consultant

An enthusiastic, adaptable and self-motivated team player with broad ranging exposure in Mining Engineering and Engineering as a whole. Possess appreciable communication skills and leadership skills with the ability to relate well to people at all levels. Target-driven, responsible Person.

B. Engineering Hons ( Chemical), 1 year experience in nickel and copper hydro-metallurgy, copper-nickel pyrometallurgy, 1 year experience in sponge iron manufacturing, 2 years experience in pyromet and production of high carbon ferrochrome.

Mining and Geodetic Engineer with an MBA

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.I have experiences on leading the project with more than 1000 multinational employees and managed many sub contractors.

Electrical instrumental and electronic technologist 16 year experienced including 2 years in Africa as supervisor and trainer for local peoples, in maintenance department. speaking english and french. I'm able to work under pressure and i have a high capabilitie to transfert my knowledge.

Experienced in mining industry equipment, mechanical, electrical, hydraulic skills.

Hard working Mining Engineer with 10 years experience in underground mine development, mine prodution and monitoring including safety, health and environment aspect of underground and open cast mining operation.

I hold a bachelors degree in mining engineering, Kwame Nkrumah University of Science and Technology, did my national service @Anglogold Ashanti,Obuasi Mine, Ghana; worked there as a Geotechnical Engineer and is now working with Ghana Bauxite Company Ltd Riotinto Alcan as a production shift superviso

I have succesfully completed BSc. Marine Engineering Degree and have neer two years working experience in Sri Lanka.Also have good knowledge in English, Computer Software (AutoCAD,Matlab,MAAST Ship designing), Internet and e-mail etc.

Diploma in Mechanical Engineering

Over 16 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 8 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

After hearing about the company and the job responsibilities of the position, I am very excited about the prospect of working at this position.

Engineering and Production cost are a significant overload. Apprpriate Control, good management and best Training practices are vital. I have been involved in mining from 2001 as a student engineer to 2008 as a Dispatcher/Senior Mine Supervisor.May I help in this important areas?.My Extensive skills

Seeking a position where I will be able to use my knowledge and talents to meet my employer's expectation.

9 months experience as a mining engineer creating drill and blast design for underground operation. 2 years experience in Bureau of Mines and Geosciences in Philippines. Undergone Surpac Introduction and AutoCAD trainings.

Junior Project Manager / Procurement Manager

Field Engineer, Instrument Specialist, Instrument Technician, Instrumentation and Controls, DCS, PLCs, Turbine Controls, Power Plants, Pipelines, Refinaries, Steel Mills

Experienced Mining engineer in large scale openpit Mines with knowledge of SAP and Materials Management and controlled blasting

Bachelors degree in Chemical Engineering with Minerals Engineering, 4 years experience with a global mineral processing company.

Being a Post Graduate Engineer in the field of Metallurgy and having a vast experience in the field of Non Ferrous Extractive Metallurgy of Zinc,Lead,Copper. Presently In charge of a Copper Smelting and Refining Project in India. Seek change in the position of Middle Management.

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

Professional Geological Technician with practical experience in Grassroots Exploration and mine base Exploration, Mine geology and Grade control.

Mining Engineer with 6 year 0f experience in mining industry

To gain a responsible position with the company, which will utilize my skills and experience in the field of Mechanical design/sales Engineer.

I am a mining engineer with more than 2 years experience. I am expert in mining softwares like Datamine, Surpac, Mine-24D, CenturySystems products for tools from Exploration up to Mine Planning and Design with short term and long term mine plans. Also known of mine optimization packages.

SENIOR PROFESSIONAL MINERAL EXPLORATION GEOLOGIST/MANAGER with 26 years Global Experience. Gold Specialty but experienced in Base Metals and Diamond. Practicing Independent Qualified Person (QP) for Canadian Securities Reporting and Resource Estimations. MapInfo/Discover GIS User.

Manager of explosives sales in under-ground and surface mining enviorment. Provided technical training to market place in initiations and explosive blast designs.

Mining Engineer with 30 years experience in metal/precious stones/alluvial deposits seeking managerial or consultant position with new or established mining projects

I'm an Electrical Engineer and since 2005, i occupy the post of Maintenance Engineer (Electricity, instrumebntation and mechanic) in a mining industrie.

Tunneling , dam and road construction , technical office

I am a mine engineer with 8 months of open pit experience. I have numerous computer skills including Surpac. I also speak Spanish.

process engineer

Jr. Engineer looking for new challenge

I seek responsibility rather than avoid it. Contagiously enthusiastic and an excellent team worker, I show independence in all my work. I have much exposure to the engineering, IT, and construction industries. I communicate with ease and am known for my diplomacy and teaching skills.

A dynamic enthusiastic, young surveyor Desire a challenging and demanding work experience with a solid company with excellent advancement opportunities to inspire, learn and impart my technical knowledge and professional resources and contribute to business development.

Diamond Exploration and running diamond exploration laboratories,

Study of techno-economical aspects of closure planning of underground mines

Degree Obtained: BTech Degree Extractive Metallurgy Engineering (2006), Registered Degree: BSc (Honours) Applied Science Metallurgy(2007-2009),• Product and process research for Heavy Minerals, Coal, Zinc, Dense Medium.

I am a Mining engineer and I got Manager's certificate.I got four years experience with Continuous Miner technology and also I got quite good knowledge of Strata Monitoring instruments.I also got very good Computor skill.

currently postion: site engineer, with Orica PNG ltd, graduated with a Diploma form the University of Technology Lae, PNG.

For the past 6 years, I have had a rewarding career as a mining and geotechnical engineer and as a surveyor. My educational background includes different aspects of earth sciences (Master of Science in Mining Engineering). I have worked in mining operations and R&D as well.

MECHANICAL ENGINEER

New calédonian based Exploration and Mine Geologist, 5 years experience. Project management, core logging, mapping, strong structural geology skills. Proficient in the use of SURPAC, MAPINFO, GPS programs, Corel graphics and database programs. Available worldwide. x

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out