Resume - Working experience - 16 years & 3 months. Highly skilled, experienced, expertise...

Misco Jobs

Resume #67588

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION

I am confident in my ability to be an efficient team worker. I am equally comfortable at working independently. I have always been keen to develop professionally and am ready for a new challenge

As an ethical, passionate worker, I am dedicated to rendering a quality service to my employer. I am a meticulous, professional person with an outstanding leadership record, skilled in managing and conducting whenever needed and at any task given to me. I am efficient and organized and a very hard worker. My track record speaks for itself. I am absolutely loyal and committed to my employer and expect the same in return.

I have an outstanding and vast amount of experience in my line of work and I also have a vast amount of experience working with diverse, multi cultural and ethnic societies all over the world and therefore I am able to adapt successfully to any given circumstance.

I am honest, reliable, inquisitive, positive, adaptable and determined to be a success in my job when given the opportunity.

PROFESSIONAL OBJECTIVE

To obtain a challenging career utilizing and expanding my practical experience, expertise and knowledge to be successful in everything I do and to be an asset and a success to an employer in the sense that my employer can benefit from my experience, knowledge and expertise.

I am ready and experienced to step up to a higher level in my career and I am confident that I will be a success.

WORKING EXPERIENCE – 16 YEARS & 3 MONTHS

8 years in New Zealand

1. I have worked at the Wellington based branch of Webster Drilling as well as extensively throughout New Zealand.
2. I regularly work overseas on contracts such as Samoa, Fiji Islands, Papua New Genii, Seychelles etc.
3. my duties at Webster Drilling were initially workshop orientated, fabricating the heliportable drilling rigs and compressors for various local and overseas projects, as well as maintenance of the fleet of drilling rigs.

My experience in the field was then utilized to do site surveys and operations, inclusive of my drilling knowledge. I am now currently between being a full time driller, both locally and abroad, and workshop technician when necessary.

8 years & 3 month in South Africa

1. I have worked in Swaziland, Lesotho, Botswana and various other places throughout Africa.
2. workshop and field service maintenance
3. on site mechanic and assisting with blasting
4. varied experienced in drill rig repairs
5. re-building of all CM350 to ECM351 crawler airtrack rigs, hammer rigs, and down-
hole hammers.
6. setting up and running workshops and stores on site and in the field
7. maintain and repair all vehicles and plant equipment, including major repairs to all types of low and high pressure compressors
8. supervision, instruction, and the re-building and management on pneumatic jack hammers
9. complete re-building and re-designing of all types of drill rigs including trackless and track driven
10. re-building of all LM500,550,600 & 660 hydraulic crawler rigs, Tamrock, Gardener, Denver, Furukawa & Ingersoll Rand rigs etc.
11. site supervision and set up

EDUCATION

Trade – Diploma/Certificate: Fully qualified Heavy earthmoving equipment mechanic – Olifantsfontein South Africa

Diplomas/Certificates: Earth Moving Equipment Mechanic
Practical Introduction to Oil Analysis
Hydraulic Rig Maintenance
LM500 Operator Technician
Hydraulic Rig Technician
DM30 Technician
LM500 Hydraulic Crawler Drill
Alpha Care – first aid
New Zealand Red Cross First Aid Certificate
2nd Regiment – South African Defense Force

Highest Standard passed: Year 12 – Benoni High School South Africa

EMPLOYMENT HISTORY

EMPLOYER: WEBSTER DRILLING & EXPLORATION LTD NEW ZEALAND

POSITION: Drilling Engineer / Workshop mechanic / Site Supervisor

DUTIES: My duties initially started with the utilization of my engineering skills in the workshop.I started with rebuilding track and truck mounted drilling rigs and moved onto the fabrication and repairs of the websters custom heli-portable rig.I then moved onto mass fabrication of these including many modifications for use abroad in various countries across the globe ie;papau new guinea,iran,Antarctica,pacific islands etc.

After about 3 years I was put in the field around new Zealand physically doing the drilling!My experience here has been varied ranging from anchor and retension drilling and testing,geotechnical soil and rock investigation work,scientific investigation drilling,monitoring bores and wells,seismic and trigonometric drilling,coring from nmlc to pq,

I particularly get allotted many difficult and challenging drill projects because of previous experience and my knack of ensuring the projects are completed from start to the all important finish!I have 15 years field experience now which definitely supports the challenge of difficult and arduous ground conditions especially in new Zealand!

Drill techniques I've used have been blast hole drilling with pneumatic/hydraulic top hole/down hole hammers and driftrers.Wash and air drilling,flushing and casing,concentrix and odex overburden casing,coring nmlc to pq.

Rigs have ranged in size from our 460kg heli-rigs to 36 ton heavy track blasthole rigs.

Repair and maintenance of a range of truck mounted, track baseframe, heliportable, tunnel drill, diggers and drill rigs. Design, manufacture and engineering of all components used on these machines. Site investigations, set up, client liaison, mobilization, drilling, demobilization and any restoration work required. Send on short and long term drilling projects both locally and overseas. Drilling includes geotechnical, scientific, environmental, monitoring and soil sampling, most types of anchor constructions.

PERIOD: October 2000 – current. (8 years)

EMPLOYER: B & E (BLASTING & EXCAVATING)
Phoenix Nickel Mine in Botswana

POSITION: Hydraulic Mechanic / Ingersoll Rand & Tamrock maintenance & repairs

DUTIES: Complete reconditiong of cylinders, pumps, final drive idlers and components. Full reconditioning of pneumatic & hydraulic drilling components. Rebuilding of down-hole hammers. Fitting of reconditioned & dyno tested CAT 3306 & 3406 and Deutz diesel engines.

PERIOD: January 1999 – March 2000 (contract) (1 year & 2 months)

EMPLOYER: BELUGA MINING (PTY) LTD Kaalfontein South Africa

POSITION: Pneumatic & Hydraulic Mechanic

DUTIES: Complete re-building of Ingersoll Rand CM350 & CM351 Crawl Air Drilling Rigs. The re-building of these rigs included: Fitting, Turning & Welding of components and the manufacture, re-design of components. Re-building and fitting of CAT, Deutz, Hatz, Detroit & Cummings Diesel engines & the air end of compressors.

PERIOD: April 1998 – December 1998 (contract) (8 months)

EMPLOYER: B & E (BLASTING & EXCAVATING)
Jet Park, Johannesburg South Africa

POSITION: Diesel Mechanic / Hydraulic & Pneumatic Fitter / Technician

DUTIES: Re-building of all Ingersoll Rand, Cardner, Denver, Tamrock Montabert & Furukawa pneumatic & hydraulic components. Re-building, Dyno testing & installation of CAT, Detroit, Hatz & Cummings engines. 50% of my working time was involved in fitting of components within Africa.

PERIOD: July 1993 – April 1998 (4 years & 9 months)

EMPLOYER: COMMUNICATION ENGINEERING LTD

POSITION: Mechanic workshop assistant

DUTIES: Re-building of Nissan & Mercedes Truck bodies and trailers

PERIOD: February – June 1993 (contract) (5 months)

EMPLOYER: KAWASAKI BENONI

POSITION: Apprentice motor cycle mechanic

DUTIES: Apprenticeship- motorcycle rebuild, repairs & racing spec dynotuning.

PERIOD: January 1992 – February 1993 (1 year & 1 months)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 1734)

Go to Search Parameters...

Brief Description

I have successfully participated in medium and large scale projects within a variety of high profile companies. These experiences gave me the opportunity to develop a strong knowledge in administration, procurement and commercial sectors, and get a broader view towards mangement strategies.

Civil, electrical, and mechanical inspector

I have been working as a diesel mechanic.

Bs. in Metallurgical Engineering, Ms. Environmental Engineering, Ms. Mining Engineering. 3 years experience in mineral processing and mining and 1 year experience in environmental auditing. I'm analytically skilled, good at working in a team, can carryout complex task with no supervision

Basic automotive schooling at technical school. One year automotive experience and three years work on Semi Tractor and Trailors

Skills - Design, Procedures, Projects, Commissioning, Calibration, Maintenance. My qualification is Instrument/Electrical Engineering Technician. I have in Nuclear Power Plant, Chemical, Mining, oil and Gas Industry in Europe and Australia

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

M.Sc. Applied Geology (68%Marks), M.Tech Petroleum Geology(67%Marks). 1 Month industrial trainings in National Oil companies. Petroleum Geosciences is my career subject. Besides,having soft skills, i also am user of GIS softwares and also know some petroleum upstream softwares.

Engineering

Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services

Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.

AutoCAD, Office, CFD (Computational Fluid Dynamic), Basic Electric, Mechanical and Hydraulic.

Arc view 3.2a, ERDAS Imagine 8.7,Arc GIS 9.1, (All extensions),AutoCAD/DeskMap,Ms Office ,DEM,Spatial analysis,DBMS

General manager of Services Company / QHSE and Management systems Oil and Gas sectors

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Wide experience as HSE Coordinator as well as Safety Manager on several construction projects in live plants and heavy construction sites.

MECHANICAL ENGINEER

Developement,depillaring with syowing,shortfirng,spporting,ventilation,surveying,

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

Shift in-charge (Production Operator) & Maintenance Engineer-Electrical, 5+years experiences, MSc Power Engineering, Chalmers Technical University, Gotenborg Sweden, Management training, Computer operations (Windows application software, comsol multiphysics, Mathlab) skills, Plant safety training, p

I rely on over 14-year experience in Instrumentation & Control Engineering in FEED & Detailed Design Engineering, Construction, Supervising, QA/QC, Commissioning, Testing and Maintenance of Oil & Gas (Offshore, Onshore), Refining, Petrochemical and other major projects.

I have work on 5 years experience in designing in mechanical engineering using Pro-Engineer, Pro-Intralink, Solidedge, Mechanical Desktop, Ansys

30+ yrs experience in the Oil, Gas, and Construction industries (within Onshore, Offshore and Overseas and in Senior Management & Shop-floor positions upon a Contract), and fluency in French, Portuguese and Spanish.

Project Management

Enviromental Process Engineer/Technician

Bachelor of Science in Mineral Engineering, eight years experience as a project/test manager for the explosives and ammunition testing industry. looking to transistion into the mining industry.

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Assignments in Mould Design / New Mould manufacturing / Mould repairing / Reverse Engineering / New Product Development / Quality Management with a growth oriented organization of repute

I have about 2 years experience as a Geologist.

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

PLANNER SMELTER

AutoCad Mechanical Desktop AutoCad Inventor 3D Modeler

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

analyst

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry

7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

I did both undergrad and master's in mechanical engineering with broad range of experiance both in mechanical engineering along with IT

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

10 Years Working As A Cartographer For QARUN Petroleum Company

As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

Instrumentation project management/Instrumentation designer

Management Graduate with Bachelors in mining engineering, excellent knowledge of SAP, Internet, Microsoft office etc. Sales in Oil and Gas, Energy sector, Training Expert. Good experience of handling people.

Bachelor degree of Business Administration graduate and very well know MS - Office, other computer languages also.

Working experience - 16 years & 3 months. Highly skilled, experienced, expertise and knowledge as a driller

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out