Resume - Experienced chemist with over ten years working in EOR/IOR projects associated t...

Misco Jobs

Resume #68383

CONTACT INFORMATION:
View contact information...

KEY COMPETENCIES

*Petroleum Laboratory management
*Setting up, adjusting and operating laboratory equipments
*Control processes in laboratory and bench scale
*Special and conventional core analysis. Coreflooding Studies
*Water/Gas and chemical flooding to IOR/EOR projects.
*Formation Damage and Heavy oil enhancing
*Strong Knowledge of Organic Chemistry
*Chemical formulations development
*Physical chemistry of polymers & surfactants
*Technical support in onshore/offshore operations
*Field/plant production fluids Samplings
*Handling/Treatment/Separation of oil/water samples.
*Knowledge of standards ISO-9000/ISO-14000
*Promotion of chemical products.
*QC/ Chemical analysis by ASTM/API Methods, UV-Visible spectrometry and HPLC.

PROFESIONAL EXPERIENCE

2005 –2007 (Present) Neotechnology, C.A, Venezuela – Germany
Laboratory & Field Chemist

* Coordinate and perform laboratory studies to evaluate new technologies to enhance oil & gas production. Evaluation of chemical formulations to sand control involving the following technical parameters: Porosity, Permeability retention, pore volume optimization, injection rate, proppant types, temperatures, pore pressure, initial fluid saturation, confinement pressure, fluids compatibility in aqueous and non aqueous systems, chemical preflush, among others. Treatment and separation of oil water samples. Fluids rheology
* Develop rock specimens under P/T controlled conditions to evaluate curing time, type of chemical formulations and evaluate mechanical properties through UCS and PLT.
* Evaluate gelling time in static and dynamic conditions using different starters of polymerization.
* Design and set up equipment to evaluate different processes at reservoir conditions. Maintenance and calibration of laboratory equipments. Calibration gauges, transducers, high-pressure syringe pumps.
* Serve as a sale representative promoting chemical products
* Design of methodologies -standard operating procedures (SOPs)-state of the art studies

2003/2005 Universidad Central de Venezuela, Petroleum engineering faculty.
Technical Support Chemist

* Responsible for the reactivation of the PVT laboratory. Maintenance and calibration of PVT equipments: Blind liquid phase PVT Cell and volatile/condensate fluids cell. (Compressibility up to 8000 psi). Calibration of rolling ball and Brookfield viscosimeters
* Served as technical support to undergraduate students & technicians in the reservoir rock and fluid properties laboratories from petroleum engineering faculty. Water/sediments, air/water permeability, porosity, fluids saturation, capillary pressure and ASTM/API methods.
* Worked in an experimental methodology to eliminate phenol from phenolic wastewater effluents of a naftenic acid plant by a laboratory ozonation system.

1989/2003 Research Centre of PDVSA-INTEVEP, Venezuela:
Advanced professional II; Activity Leader for La Salina project and Professional I, Laboratory and activity coordinator for Lagomar project. Offshore projects. 1996/2002,

* Designed, organized and performed laboratory activities to establish alkali-surfactant-polymer (ASP) formulations to the reservoirs LL-03 and VLA 6/9/21, involving fluids characterization, conventional and special core studies. Fluids studies involved: phase behavior to oil-water-surfactant systems, optimum polymer concentration, critical micelar concentration and ultra low interfacial tension to surfactants. Rheological behavior, molecular weight effects, thermal stability (bottle tests, anaerobic chamber), fluids compatibility, solubility, interfacial phenomena and compatibility of polyelectrolytes and additives in formation, injection and soft water. Evaluated Antiscalants. Conducted Coretestings and Fluid-rock interactions tests: chemical retention, Absolute and relative permeability, capillary pressure, wettability, porosity, pore volume and oil recovery.
* Studied the surfactant/polymer interactions by rheology and tensiometry.
* Contributed to the technological risk analysis for an ASP full field application and worked as a part of a team to generate a pilot design to determine the effect of gas lift on the produced fluids and the effect of the transport of injected blends on the viscosity at the experimental well "CEPRO"
* Coordinated and oversaw the quality control and preparation of whole slug of ASP injected in the well 1325, during the pilot test "SWCT" to evaluate the efficiency of ASP process in Lagomar field (offshore). On-site inspection of the barge facilities to evaluate mixers and tanks integrity. Installation of equipments required to monitor and ensure the quality of the polymer and surfactant blends, previous the pilot test
* Performed water/oil separation in the field using portable separator and demulsifiers. Oil and water (Brine) tests by ASTM, API and SMWW methods.
* Analyzed asphaltenes content, water and sediment content in crude oil by (ASTM 4007-02, API MPMS Ch. 10.3/10.2), density, specific and API gravity, carbonates and bicarbonates in brines (Alkalinity), chlorides, total dissolved and total suspended solids in brines.
* Served as a technical support in project "Exploitation and unconventional uses of heavy and extra heavy oils" to demonstrate the cracking and hydrogenation of heavy oil by electrochemical treatment.
* Technical support during the injection and sampling of tracers in the Lagomar field.
* Supported the preparation, mixed and injection of emulsions with heavy oil at the FN-2 well, Furrial field.

Associated Research Technician III (Field technician) to both Projects "Support to the Integrated Studies to the fields: Centrolago (offshore) and El Furrial(onshore)". 1992/1996

* Investigated the fluid-fluid compatibility and fluid-rock compatibility through filtration tests and fines migration studies (critical velocity) on oil free and aged cores and helped scale data to field condition.
* Carried out reactivity tests of heavy oil to activate natural surfactants.
* Sampled oil-water to extract chemical and radioactive tracers to monitor water breakthrough in production wells and sampled H2S at wells of the Furrial field. Designed and improved the laboratory facilities for treatment and separation of oil/water samples containing tracers using demulsifiers, ultrasound and electrical treatment. Collaborated with the risk analysis using the methodology "What IF" to use this process in laboratory.
* Sampled light oil with needles on well head and well pipe (HP&HT) to geochemistry analysis.
* Selected and evaluated HT resistant polymers and its blends with alkali-surfactant for HT reservoirs.

Principal Research Technician, Reservoir Technology Department, 1989/1992

* Set up systems with different types of porous media and handled the tomography technique to evaluate the distribution of fluids inside the cores.
* Performed extra-heavy and heavy oil thermal treatment tests using hydrogen donors, methane, water and steam in static & dynamic conditions. Evaluated the steam injection with solvents on heavy crude oil. Characterized these samples by density, °API, viscosity and thermal analysis.
* Conducted the preparation/injection of polymer/biopolymer solutions in reservoir cores to evaluate flow parameters; injectivity, resistance factor (RF) residual resistance factor (RRF), brine injection, oil recovery and polymer retention, monitoring polymer concentrations by UV-Visible spectrometry and HPLC.

EDUCATION
2000 BS in Chemistry (Technology)
Universidad Central de Venezuela, Caracas, Venezuela

1986 Associated degree in Chemistry
University Institute of Technology Capital Region, Caracas, Venezuela

OTHERS SKILLS
* Microsoft Word, Microsoft PowerPoint, Microsoft Excel, Basic reservoir simulation with STARS
* Languages: Spanish: Mother Tongue/English: Spoken and Written (High Intermediate Level)
* Supervision of small group of professionals and students in laboratory and field work
* Analysis, treatment and purification of gold of mines and jewels. Goal-oriented/Fast learner/Innovative
* Data/results interpretation and preparation of progress/final reports
* International exposure during technical visit to partners in North America and Europe
* Co-author of international technical publications in chemical flooding (EOR)

NOTICE PERIOD: One month CURRENT LOCATION: Venezuela

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 1734)

Go to Search Parameters...

Brief Description

Lean Master and Master Black belt instructor, facilitator and coach currently with BMG (Breakthrough Managemnt Group). Main function currently as Six Sigma and lean account executive responsable for the deploymemnt of Lean and Six Sigma initatives with various local and international orgenisations.

MSc Mining geology student graduating this summer. Looking for a summer project in association with a company, preferrably in exploration, hopefully leading to employment. Interests are in Gold and Ni-Cu-PGE exploration. Extensive field experience in remote areas.

Fitter, Turner, Machinist, Planner, Scheduler

I am continuing my 4 year B.Sc course in Materials and Metallurgical Engineering in BUET in Bangladesh.

Supervision construction commissioning startup air separation ,heavy oil etc.

I have 20 yrs experience as a surveyor. I was trained in the U.S. Army as a Field Artillery Surveyor. I have experience on highrise buildigs and sub-divisions. I have surveyed oil and gas pipelines and power line routes. I also worked on marinas providing layout and volume reports.

Geologist Resume

Graduating student with B.S. in Mining Engineering. Experience in Surface M/NM, Underground Coal, Underground M/NM. Extensive Computer Application background. Seeking International Employment.

Automation and Instrumentation Specialist. College diploma in industrial electronics (Teccart Institute) option: regulation, instrumentation and automation. Graduated with distinction, May 1999.

Superintendent, Rotating Equipment - Estimate manhours, design schedule, Supervise and coordinate all rotoating equipment installations.

14 yrs. in the A/E industry

Geologist

Petroleum Mechanical Engineer Project Manager Technologist Operations Mining

I did BE Mech in 1999. I've Five years Experience in Die Casting field. Experience in Design and Manufacturing of Pdc dies. My skill is to prepare the fmea meeting of designing area with checklist presentation ie. functional & design related points and then all the drgs are submitted to Mfg team.

Rotating Equipment Engineer, Maintenance Engineer, Vibration Engineer, Reliability Engineer, Mechanical Engineer

Bsc (Hons) Surveying, 5 years experience, Competent with setting out, topograghical surveys, mine surveys,cadastral surveys

Researched and implemented a 32 X 32 CMOS Image sensor using ‘Cadence cmosp18 tech. Implemented the schematic circuit design and layout for Active Pixel Sensors (32 X 32), 32 CDS units and 32 differential amplifier units.

Fast track professional, successful in field of instrument, control and electrical for installation, commissioning, repairing, maintenance, calibration and modifications of Electronic, Pneumatic, Safety, Analytic instruments. and control systems.

Experienced chemist with over ten years working in EOR/IOR projects associated to laboratory and field to the oil & Gas industry in Venezuela. Coordinated and used different analytical equipments, methodologies and facilities, following standard procedures of laboratories and operations

Free! A seasoned, highly organized construction professional with over 39 years of heavy industry experience which includes both industrial construction sites and field/shop fabrication locations in all major industries worldwide

M.Sc. in Applied Geology, with Expereince in Geotechnology and Exploration Geology, with well computer knowledge

Operations, I&C, Electrical, Startup, Commissioning Experience. 11 years of progressive technical and supervisory roles in Oil/Gass and Power Plants. Includes Gas Turbine, Comined Cycle, and Pipeline Operations.

I am an experienced Mechanical Engineer in the field of Design & Welding (IWE) Engineering. I obtained my Dipl-Ing. certificate (equivalent of MSc(Eng.) in Design and Construction of Agricultural and Construction Machinery from the Technical University of Berlin in Germany

Drafter/Designer-Entry Level with some experience

Diploma in Surveying; Profficient in SURPAC; AutoCad, Vcad

Mining Diploma, Bachelor's degree in Mining Engineering

I am trained in the mechanics and operation of back hoe, bobcat, jack hammer, dumptruck, forklift, sissor lift, crane(boom truck), delimber, and rock crusher. I also have skills with tack welding, drafting and construction.

Data manager with over 10 years of experience in the mineral exploration industry providing high quality digital tools, data and information to geoscientists. Extensive experience managing IT projects and services on an international environment. Strong analytical, organizational and technical skill

Recently graduated from 4yr BA(Hons) in Geology, looking for FIFO work in any country, flying to/from UK/Ireland. Course & dissertation work provided some fieldwork experience. French to higher Leaving Cert level. Please see personal statement in resume for more details.

Fresh Mechatronics Engineering Graduate

Oracle dba, technical support

Java, JSP, Servlet, J2EE, JSTL, SQL, PHP, ASP, XML, HTML

Can work with computers, good communication skills, team player, can work under pressure

I am a Graduate Mining Engineer with 11 years of wide experience in different Mining Operations. Currently Located at London UK.

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

Fitter Including Machining and Diesel Fitting

experienced electrician with vast instrumentation and supervisory experience.

CIVIL ENGINEER WITH 12 YEARS OF EXPERIENCE IN CONSTRUCTION FIELDS

• More than ten years experience in project/operation management and real estate development

Marketing and Software experience with Oil & Gas (drilling) background

graduate metallurgist and holder of BSc Min in Metallurgy and Mineral Processing from the University of Zambia with merit.Am currently working for Konkola Copper Mines (KCM) at the Nchanga Tailings Leach Plant as a metallurgist.

Iam a Mechanical Design Engineer with experience in Heavy steel structures, Pressure Vessels ( Several Types), Power Generation, Material Handling. I have quite a number of projects to my name that have been completed succesfully

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

I wish to introduce myself as an Automation Engineer with over 8 yrs of exp in automation field.

Instruments: GPS Trimble 4000SST/SSE,Leica S 500, ETS Sokkia Set 310, Sokkia DT510, Digital Echosounder Marimatech, Raytheon, Paleport ATG, and Curent Meter, Software: Auto CAD 14/2004, LDD 2000i, Softdesk 8, Trimble Software (Trimnet, Trimvec), Geocalc, Hidropro V.6, Surfer v.8 and Office 2000

I am a Broadcast Technician ZBC-TV in Zimbabwe. In March 2006 I completed a 4 year apprenticeship with ZBC-TV and have worked as permanent staff ever since. I am a Class One journeyman and hold a National Diploma in Electronic Communication Engineering.

I have work experience in United States, SE Asia, and China. I am a registered Professional Engineer (Civil) in State of California, USA. I am looking for a professional/managerial position in civil engineering/construction. Project experience and publications are available upon request.

Skills: Auto CAD versions 9 thru 2006i, Prime Medusa, UNIX, Micro Station, Microsoft Office, along with several other computer based applications.

25+ years Procurement, Material Control and Logistics Experience / Public and Private Corporations

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out