Resume - Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directiona...

Misco Jobs

Resume #68910

CONTACT INFORMATION:
View contact information...

CAREER SUMMARY

Mechanical Engineer with 10 years of experience in QA/QC,HSE, and MWD/LWD/Directional drilling services for the construction and oilfield industry. Excellent interpersonal and organizational skills, ability to interface with team members, customers and suppliers. Willing to travel & relocate.

WORK EXPERIENCE

HALLIBURTON Energy Services - THAILAND (06/2007 – YTD)
Special Drilling Services Consultant
Perform Measurements While Drilling (MWD) and Logging While Drilling (LWD) field services in off-shore operations (mainly Chevron Thailand Exploration Ltd. and PTT Exploration and Production Public Co. Ltd.) in Thailand.

ELICON LTD. (10/2006 – 05/2007)
QA/QC/HSE Advisor
Support inspection activities, review QA/QC obligation, plans and HSE procedures. Verify compliance to client's requirements. Review Inspectors deliverables; resolve QC and HSE issues.
QA/QC Inspector
Inspection of the Super heater Smelter for SOUTHERN PERU COOPER CORPORATION, under API 560 standard.
QA/QC Construction Supervisor
Construction Supervision of a Heater under API 560, ASME B 31.3, ASTM, and AWS D1.1 standards, on behalf of FIMA S.A.

PV INSPECTION SERVICES LTD. (05/2006 - 10/2006)
QA/QC Inspector/Construction Supervisor.
Support all phases of project: supervision, inspection, engineering; including but not limited to QA/QC, materials receipt verification, documentation review, logistics, and final visual/dimensional/welding quality inspection and shipment transportation. Interface with project/client/supplier personnel, at all phases of project development.
- Supervisor on behalf of PETRO-CHEM DEVELOPMENT INC. (USA), in the Super Heater Smelter construction mining Project.
- Monitor and Inspect specifications and procedures compliance, WPS/PQR's, welding (AWS D1.1, ASME B 31.3) heat treatment, endurance and pressure test, NDT activities.
- Inspect Castable installation (API 560) and contractor job development.

SCHLUMBERGER Oilfield Services (12/2000 – 03/2006)
Senior Drilling Services Engineer (DSE)
Perform Directional Drilling (DD ), MWD and LWD jobs in on-shore/off-shore oilfield operations worldwide.
- Directional Drilling Engineer (2nd hand) in Peru.
- Lead MWD/LWD Engineer in Brazil, Ecuador, Venezuela, Colombia, and USA.
- Quality Steering Committee (QSC) leader in Peru.
- Radiation Safety Officer (RSO) for nuclear LWD tools in Peru.
- Attended Quality, Health, Safety and Environmental (QHSE) training.
- MWD/LWD field instructor in Peru, Venezuela and USA.

GMN Projects. (1999 – 2000)
Mechanical Engineer Consultant
- Consulting services in engineering, structural design and project development with Finite Element Analysis (FEA) software (MSC Nastran).
- Structural analysis of a Head frames, mining reactive storage tanks.Improvements on Lake's floodgates.

PONTIFICAL CATHOLIC UNIVERSITY OF PERU (1998 – 1999)
Instructor and Teaching Assistant
School of Sciences and Engineering. Courses: Dynamics, Strength of Materials and Mechanical Drawing.

EDUCATION

Pontifical Catholic University of Peru. School of Sciences and Engineering (1992-1998)
Bachelor Science in Mechanical Engineering

TRAINING COURSES

- HUET -Helicopter Underwater Egress Training (Bangkok, Thailand)
- Sea Survival Training course (Bangkok, Thailand)
- Drilling Services Engineer 2 (TX, USA)
- Drilling Services Engineer 1 (TX, USA)
- Quality, Health, Safety and Environmental (QHSE). Schlumberger training program.
- Oilfield Services 3. Personnel Management (Rio de Janeiro, Brazil)
- Oilfield Services 2. Presentation Skills (Bogota, Colombia)
- Oilfield Services 1. Oilfield Services (OK, USA)

COMPUTER SKILLS

Proficient in the following programs: MS Office (Word, Excel, PowerPonint,Access, Outlook), MS Project, AUTOCAD, MathCAD, MSC Nastran (FEA software). Internet User.

LANGUAGE SKILLS

Spanish (native speaker), English (fluent), Portuguese (intermediate level), French (Basic knowledge)

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 1870)

Go to Search Parameters...

Brief Description

I wish to join a organization that can utilize my skills and training effectively that is commensurate with experience and qualifications and reward me accordingly. I am a well presented person and can take up new employment at short notice.

1991-1995 Electricity Engineering Azad University Of Kazeroon, Iran. 2002 Professional Media Production Barnet College, London. 2003 Professional Community Interpreter Workers' Educational Association London. 2004 Health and safety Weavers Trust, London.

Both geophysicist and computer enginner with good skills and experience in mining and oil & gas industry. Seeking a challenging position with growth and responsabilities.

Good knowledge Civil, Mechanical, and Electrical Work at Telecomunication Company. Also Site Acquisition work for BTS site.

Energy Industry Management Professional

Highly organized, detailed oriented and self motivated Lead Engineer having 6 years of professional experience in the field of product development/sustaining engineering

Dedicated Cost Engineering Professional with exceptional project corresponding skills, multinational work experience and extensive abilities in Cost estimation, Quantity surveying, Claim analysis, Tendering, Contract administration, Cost monitoring/reporting, Schedule monitoring, Bid management, Bud

Managed three R&D labs, namely, Failure Analysis Lab, Mechanical/Metallography Lab, and Metrology Lab

Experienced Mechanical engineer as Tunneling specialist in operation,maintenance,construction tunnels and executing projects.

I have successfully managed a business for some time and then completed an applied geology course at the Camborne School of Mines, this was essentially a practically based course that introduced and developed many aspects of geology, mining and environmental management systems.

Good analytical thinking, cross cultural communication and interpersonal skills, highly discipline, strongly motivated, dynamic personality, proven good organization and leadership skills; hard worker in any environments, experience using Dealer Business System, Asset Management Tools and microsoft

Presently working with PHILLIPS KILN SERVICES, MUMBAI as Project Engineer. it is a us-indo venture.

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

I have over 25 yrs experience in the oil and gas industry in various positions and with my technical training of 3 trades which are as follows; Licensed H.D. (diesel) mechanic, Licensed millwright, and Licensed motor mechanic I believe that I would be an asset to your organization.

Underground Blackhat Miner, EMT Miner Certification, Double-head Fletcher, Roof Bolter, Operate 488 Scoop

Mining engineer, master, underground and surface mining, feasibility studies, planning

Engineer / EMS / SCADA / Electrical / Telecom / Power Sector

Computer networking, electronics services and repairs computer maintainace communication system and intercom. Electrical power system,control systems and automation. I am holder of a Liecentiate in electrical engineering and a certificate of enginnering in electrical and electronics enginneing

Primavera P3/P5/P6 Senior Planner / Planning Manager with Expat experience in Middle east and South East Asia. I am seeking a position working along side local workforce where i can assist with local development.

A dedicated and enthusiastic Master’s graduate in Control Systems & Instrumentation with two years job experience in the industry

MS in Environmental Engineering - Geo-Resources Emphasis ( 5years )+ Diploma of Specialization in Mining Sciences and Technologies (Post-graduate Research 3 years) - Freelance experience in QUARRY PLANNING-DESIGN and ENVIRONMENTAL ASSESSMENT (2 years)

GIS Analyst/ Geoscientist...M.Sc. Geology, M.Sc. GIS, Cert. Data Processing and Info Tech

Fast learner and and succeed at everything I set out to accomplish.

To use my wealth of experience and full potential to contribute in a challenging organization.

Degree electronic engineer - 3 year expr. in industrial autoamtion - key skill PLc programming, SCADA developemnt; Robot programming; maintenance if industrial control system

QA QC Engineer, Laboratory Manager,

HR driver licence [Austr], Austr QF cert 3, Austr ESI cert 3, International switching Authorisation up to 88kv, Victorian line worker registration, WA licence for High Risk work, First Aid, Oh service testing [Metrel, NST], Safety blue card, EWP card, Internat Maint Electrician 4yr appy + 8yr exp

Mechanical-Piping Engineer - experienced in piping and procurement related activities for both offshore as well as onshore facilities

1. Mines planning engineer. 2. blasting engineer. 3. excavator incarge. 4. suppervisor. and 1. Bachellor of Engineering (Mininig Engineering). 2. Blasting Certificate.

As a Project/Contract Mgr, my background is in Construction. I have worked with Owners/Clients, Architects, & Engineers. I am experienced in continuous improvement in construction, process, & people mgmt. I'm experienced in business & project mgmt in small, large, & mega const. projects.

Good knowledge and efficient use of computer in data processing, record systems and the Internet (Microsoft Office packages, Operating Systems, Computer Maintenance and Assembling). B.Sc. Physics with Applied Geophysics (Second Class Honours, Upper Division).2005

Projects Estimation Engineer

Geospatial Analyst with over 10 years in GIS, 4 years in remote sensing, 8 years in autocad, 4 years offshore drilling, and a Geology degree.

Areas of expertise include Civil/ Mining Management, Construction Supervision, Project Management and Procurement.

Environmental project scientist with project management experience in the areas of oil and gas and dry cleaners. I have extensive Phase I and Phase II experience. I have a proven track record of being on time and within budget while working on multiple projects.

Bachelor of mechanical engineering working as rotating equipment engineer for condition monitoring and predictive maintenance using vibration analysis, ODS, alignment, lube oil analysis, Thermal imaging (Thermography), videoscope, operating parameters

Electrical engineer, Matlab, PLC, Labview

Bs. in Metallurgical Engineering, Ms. Environmental Engineering, Ms. Mining Engineering. 3 years experience in mineral processing and mining and 1 year experience in environmental auditing. I'm analytically skilled, good at working in a team, can carryout complex task with no supervision

Skills - Design, Procedures, Projects, Commissioning, Calibration, Maintenance. My qualification is Instrument/Electrical Engineering Technician. I have in Nuclear Power Plant, Chemical, Mining, oil and Gas Industry in Europe and Australia

In May 2009 I will graduate from Texas Tech University with a Masters Degree in Transportation Engineering, with 3.66 GPA. With over 1 year of experience in Commercial Project, I have developed a strong background in Planning and designing.

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services

Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.

Degree in Geological Sciences. Experience in laboratory of total and clay mineralogy analysis, sedimentology and petrography. Use of stereomicroscope and polarizing microscopy. Good knowledge of Office programs and basic AutoCAD and ArcGIS program.

Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor

Network Engineer

Arc view 3.2a, ERDAS Imagine 8.7,Arc GIS 9.1, (All extensions),AutoCAD/DeskMap,Ms Office ,DEM,Spatial analysis,DBMS

GIS, Geophysical Data Processing, Mapping, Airbone Surveying

Business Process Modeling • Process optimization • Project management • Lean Six Sigma • Predictive and Simulation modeling • Manufacturing reengineering • Data analysis • Metrics development and reporting • Organizational development • Sales effectiveness • Supply Chain Management • Patent engineer

Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out