Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #69035 next resume »»
CONTACT INFORMATION:
View contact information...

3. Date of birth: 28-03-1972
4. Country of Origin: Serbia (Yugoslavia)

Institution
[ Date from - Date to ] Degree(s) or Diploma(s) obtained:
Faculty of Technical Sciences, University of Novi Sad

November 2000 – September 2006 Ph.D. Traffic Engineering & Transportation Planning
(Pro-Active Road Safety Management)
Deutsches Zentrum fur Luft und Raumfahrt - IVF, Berlin, Germany

September 2002 – December 2002
Ph.D. Researcher (Accident Prediction/ Traffic Safety Modelling)
Faculty of Technical Sciences, University of Novi Sad

November 1997 – April 2000 (Full Time: 2 years – 4 semesters)

M.Sc.Eng.(Traffic Safety Engineering)
Faculty of Technical Sciences, University of Novi Sad

October 1992 – September 1997 (Full Time: 5 years – 10 semesters)
BSc.Eng.. (Traffic Engineering and Transport Planning)

Membership of professional bodies/ Professional activities:
Professional Engineer - Member of Institution of Highways and Transportation – MIHT, UK
DSA (Driving Standard Agency – DfT) approved translator for English language, Department for Transport, UK
Automobile and Motorcycle Association of Serbia (AMSS) – Member/ Expert for Drivers Training / Instructors Assessments and EU Driving Licensing System Implementation.

5. Other skills: (e.g. Computer literacy, etc.)

Completed Training:
* RoSPA – Royal Society for the Accident Prevention - ROAD SAFETY ENGINEERING AND ACCIDENT PREVENTION, 7 - 19 July 2003, Bedford, UK.
* INTRODUCTION TO ROAD SAFETY AUDIT, 24 - 26 Jun 2003, TMS Consultancy, Coventry, UK.
* KeyACCIDENT – Key Traffic Systems, 28 April 2004, Redditch, UK
* Defensive Driving – Black Top Roads, OTI (Occupational Training Institute – National Safety Council) 28th -29th November 2004, Muscat, OMAN
* Defensive Driving – Graded Roads, OTI (Occupational Training Institute – National Safety Council) 4th December, 2004. Fahud (Interior/ Desert), OMAN
* Basic Fire Extinguisher, National Training Institute – NTI, Muscat, OMAN, January 2005.
* Basic Life Support – First Aid, OTI (Occupational Training Institute – National Safety Council) 3rd to 5th September 2005, Muscat, OMAN
* Supervising Safety, National Training Institute – NTI, 3 - 5 January 2005, Muscat, OMAN
* Safe Journey Management, National Training Institute – NTI, 6th January 2005, Muscat, OMAN
* Job Hazard Analysis, National Training Institute - NTI, 2nd January 2005, Muscat, OMAN
* Tripod Beta Practitioner - Incident Investigation, Tripod Solutions, 10th to 15th September 2005, Muscat, OMAN
* Incident Investigation, OTI (Occupational Training Institute - National Safety Council) 19th to 20th September 2005, Muscat, OMAN

Advanced Computer and Programming Skills:
 MS Office (Word, Excel, Power Point, Access, etc.)
 Programming - Object Pascal – DELPHI (ISQL)
 Modelling, Simulation (OSCADY, PICADY, ARCADY, SAFENet, COBA, JUICE)
 GIS (MAPInfo, Auto Desk Map)
 Analytical/ Statistical Software (SPSS, Key Accident)
 Auto Cad
Driving Licence:
 Full UK Driving Licence
 Omani Driving Licence

6. Present position: Contract Manager, Road Safety Monitoring Services - PDO (DASET), Muscat, Oman

7. Years of working experience: 10+

8. International Experience
Country Date: from (month/year) to (month/year)
Oman/ Middle East 2004 to Present
UK 2002 to 2004
Germany 2002
Yugoslavia/ East Europe 1996 to 2002

9. Key qualifications:

Road Safety Engineering:

* Road Safety Schemes
* Accident Prevention & Reduction
* Road Safety Improvement Measures
* Transportation Planning/ Modelling & Simulation
* Traffic Engineering, Traffic Analysis & Modelling – Evaluation and Estimation
* Economic Assessment of Road/ Design/ Safety Schemes (PARs)
* Road Safety Management/ Planning/ Modelling
* "Black Spot" Management
* Road Safety Strategy & Policy Development
* Project / Contract Management Transport & Logistics Safety (HSE):

* Road Safety Monitoring
* 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)
* Accident and Safety/ Risk Analysis – Evaluation and Estimation
* Transport & Logistics HSE Management
* Road Transport HSE Case Development
* Road Transport HSE Specification Compliance Management
* Accidents/ Incidents Investigation Reconstruction & Reporting
* Driving Education and Training Management (standard courses and professional DDCs)
* Expert Witness Analysis

10. Professional experience (from most recent)
Date from - Date to Location Organisation Position Description
March 2004 to Present Muscat, OMAN DASET (Petroleum Development Oman) Contract Manager
(Road Safety Monitoring Service PDO) * Appoint personnel to perform services under the contract
* Procure materials and equipment to perform the services
* Manage and plan the equipment and personnel to effectively carry out a road, transport and logistics safety monitoring activities
* Ensure that Contractual commitments are fully complied with, such as HSE, Quality and Reporting requirements
* Administer the contract, including invoicing, planning and scheduling, and adherence to Company (PDO – Petroleum Development Oman) procedures
* Liaise with the Company Contract Holder
* Ensure that specific administration tasks detailed in the scopes of work are delivered complete and in a timely manner
* Providing road safety presentation at Interior and Coastal locations, attending Transport and Driver Forums, and Drive to Survive meetings.
* Developing road safety awareness/ briefing packages targeted towards drivers and drivers supervisors, vehicles and roads.

Managing the following activities
* Observations and counselling as required for on-road Driver behaviour with emphasis on defensive driving habits and adherence to statutory road rules and regulations.
* Roadside random vehicle checks as part of the RAS scheme-including Load Safety. Planned and targeted Vehicle Fleet checks, including pre-contract start up fleet inspections, per request from Contract Holders
* RAS Contractor Facilities-inspection/audits of RAS Inspection Facilities and RAS Inspectors.
* Safe Journey Management audits.
* Black Spot management/ Cluster Site Analysis.
* Vehicle workshop and maintenance systems /inspections and audits.
* Road Safety Presentations to Driver Forums, Driver groups, vehicle maintenance staff, their supervisors, both contractor and Company, on a wide variety of road safety topics, including for example: tyre safety, load restraining, driver conditions, common violations etc.
* Road Traffic Accident Investigations and Reporting.
* Expert Witness Analysis.
* Traffic Speed Checks using speed metres.
* Driver compliance with driver licensing, PDO permits, driving and rest hours, adherence to driving rules, traffic laws and regulations.
* Provision and sourcing of material for road safety campaigns to influence driver behaviour, including photography/video of road safety topics/violations to graphically portray wrong versus correct behaviour.
* Road Safety Audits/ Road condition, road signage and marking standards, geometric design elements, general layout design of interchanges and intersections, with emphasis on the visibility and sight distance, safe intersection sight distance, sight distance to queued vehicles.
* Report findings on all of the above to the Company
November 2004 – March 2005 Muscat, OMAN Bahwan Exel Regional Road Safety Advisor (PDO 4PL Operations) * Conduct routine HSE inspections & audits of rig move plans, vehicle roadworthiness, driver competency, load safety, journey management, dangerous goods transport, & other activities.
* Undertake and assist in Road Traffic Accident (RTA) investigations and reporting processes.
* Design & implement programs to ensure compliance with the HSE Management System.
* Facilitate and support Job Hazard Analysis, risk assessments & provide advice on controls.
* Maintain an Action Tracking Register that addresses actions from near miss reports, audits, hazard reviews and incident investigations.
* Assist in planning and executing emergency response drills.
* Compile HSE metrics & report at HSE meetings on statistics against performance targets.
* Provide training & communicate best HSE practice and lessons learnt.
* Liaise with all members of the Company HSE Team to ensure the most efficient use of resources and application of best practices.
March 2003 – October 2004 Bedford, UK URS Corporation Ltd. Road Safety Engineer * Transport Safety Planning
* Accident Investigation
* Risk Modelling
* Road Safety Schemes
* Road Safety Audit
Major Projects:
HGVs (Heavy Goods Vehicles) Safety Study, National road network, "Black spot" identification and revitalisation, Client: Highway Agency, UK
Junction 14 Motorway M1 Revised Study, AREA 8 MAC Contract, Full PAR (Project Appraisal Report), Accident savings estimation, Client: Milton Keynes Borough Council and Highway Agency, UK
A1 Side Roads and Accesses – Mandatory Signing, AREA 8 MAC Contract, Short PAR (Project Appraisal Report), Accident savings estimation, Client: Highway Agency, UK.
A5 Dunstable – High Street M1 Signs, Road Safety Audit (Stage 2), Client: Highway Agency, UK
A14 Spittal Interchange – Provision of Traffic Signals, AREA 8 MAC Contract, Accident investigation and analysis, Full PAR, Accident savings estimation, Client: Highway Agency, UK
A 508 Blacky Moore – Foot Bridge Provision, Northampton, Road Safety Audit (Feasibility Stage), Client: Highway Agency, UK.
A421 Marsh Leys Roundabout, Road Safety Audit (Stage 2/ Stage 3), Client: Highway Agency, UK.
BUS Priority Scheme, Traffic & Safety Study, Client: Highway Agency, UK.
Ridgmont Crossroads, Safety Study, Client: Highway Agency, UK.
A5 Dunstable – High Street M1 Signs, Traffic Survey and Analysis, Client: Highway Agency, UK.
A14 Eastbound Approach to Girton Interchange, Traffic & Safety Study, Client: Highway Agency, UK.
Accident Cluster Site/ "Black Spot" Identification on the A Trunk Roads, Area 8 MAC Contract, Client: Highway Agency, UK.
A43 and A45 Weather Station Provision, Road Safety Audits (Stage 1/ Stage 2), Client: Highway Agency,UK.

June 2002 – February 2003 Newcastle upon Tyne, UK Babtie Group Ltd.
Assistant Safety Engineer * Transport Safety Planning
* Accident Investigation
* Risk Modelling
* Road Safety Schemes
Major Projects:
* Road Safety Study – Trunk Roads in Scotland, Accident investigation and analysis, Client: Scottish Executive, UK.
* Local Road Safety Schemes – South Tyneside, Accident investigation and analysis, Preliminary road and junctions design, Traffic calming measures, Client: South Tyneside Council, Newcastle upon Tyne, UK
* Traffic Estimation and Development Planning – ASDA Cargo Fleet, Investigation of traffic development, parking and accesses in Middlesbrough, Traffic simulation and modelling, Client: Middlesbrough County Council, UK

February 1999 – May 2002

November 1996 – May 2002
University of Belgrade, Serbia

University of Novi Sad, Serbia

Police Academy

Traffic Research Institute Professor Assistant / Traffic Safety Consultant

Project Engineer/ Traffic Safety Consultant * Conducting and teaching traffic safety courses for senior traffic police officers and road safety enforcement organizations, traffic safety preventive and propaganda, traffic accident management and traffic accidents expertise.
* Supervising and managing over the whole process of driving education and training for B and C driving category
* International OSCE project regarding training of multi-ethnic police enforcement on South Serbia – Kosovo Border (supervision of road safety courses).

* Traffic Engineering and Transportation Planning
* Infrastructure Development Planning
* Accident Reconstruction and Investigation
* Urban Transport Planning
* Traffic & Transport Research
* Traffic Engineering & Road Safety courses teaching

Major Projects:
EU Driving Licence, Unification of EU Driving Standards and Regulations, Belgrade, Yugoslavia
Taxi Drivers Training/ Assessment and Certification, City of Novi Sad, Novi Sad, Yugoslavia
Logistics Base Optimization - NIS-Naftagas (Oil and Gas), Faculty of Technical Sciences, Novi Sad, Yugoslavia.
Public Transport Development in Novi Sad, Faculty of Technical Sciences, Novi Sad City Council, Novi Sad, Yugoslavia.
"Black Spot" Investigation in Vojvodina, Faculty of Technical Sciences, Novi Sad, FR Yugoslavia.
Causes and Appearance of Traffic Accidents in Novi Sad County, Faculty of Technical Sciences, Novi Sad, Yugoslavia.
Researching in the Filed of Communications - Road Safety Issues, Faculty of Technical Sciences, Ministry for Science and Development, Republic of Serbia, Yugoslavia.

Publications:
(Internal and Published Documents):

Slobodan Lazic: Addition to Definition of the Traffic Accidents Prediction and Estimation Possibility in the Function of Modern Road Safety Management Approach, Doctoral Dissertation (Ph.D. Thesis), University of Novi Sad, Faculty of Technical (Engineering) Sciences, Novi Sad, Serbia, 2006.
Slobodan Lazic: The Accident Database Analysis and the Black Spot Identification Methodology, VIII International Symposium "Traffic Accidents Prevention on Roads '2006", Novi Sad, Serbia, 2006.
Slobodan Lazic: The Concept of the Operational (Engineering) Road Safety Management, VIII International Symposium "Traffic Accidents Prevention on Roads '2006", Novi Sad, Serbia, 2006.
Slobodan Lazic: The Black Spot Treatment - Economic Analysis and Engineering Preventive Measures Evaluation, Conference - Traffic Accident Prevention on the Corridor "X", Belgrade, Serbia, 2006.
Slobodan Lazic: A Modern Road Safety Management Acknowledgment Reflection on the Traffic Police Role and Organisation, Conference - Traffic Accident Prevention on the Corridor "X", Belgrade, Serbia, 2006.
Slobodan Lazic: The Mathematical (Statistical) Modeling in Traffic Safety, XXI International Conference «Science and Motor Vehicles», YUMV - FISITA, Belgrade, Serbia, 2007.
Slobodan Lazic: HSE Plan & Procedures, DASET, Muscat, Oman, 2005.
Slobodan Lazic, RSMT Working Procedure, DASET, Muscat, Oman, 2005.
Slobodan Lazic, Road Traffic Accidents Reporting Procedure, DASET, Muscat, Oman, 2005.
Slobodan Lazic, RSMT Vehicles - Safety Operations Procedure, DASET, Muscat, Oman, 2005.
Slobodan Lazic: Road Safety Audits – A Key Process in Accident Prevention, TES 2004 – A New Tool in Transportation Engineering, IV International Symposium, Sombor, Serbia and Montenegro, 15-16 April, 2004
Slobodan Lazic: Road Accident Prediction - Dynamic Concept of Road Safety Management, SAFETY 2004 - 7th World Conference on Injury Prevention and Safety Promotion, Vienna, Austria, 6-9 Jun, 2004.
Slobodan Lazic: Statistical Methods and Tests in a Road Safety Valuation, VII International Symposium "Traffic Accidents Prevention on Roads '2004", Novi Sad, FR Yugoslavia, 2004.
Slobodan Lazic: The Police Respect and Attitude for Traffic Accident Prevention Activities in a Local Authority District, VII International Symposium "Traffic Accidents Prevention on Roads '2004", Novi Sad, FR Yugoslavia, 2004.
John Barrell, Slobodan Lazic: Speed Management and Traffic Safety, VI International Symposium "Traffic Accidents Prevention on Roads '2002", Novi Sad, FR Yugoslavia, 2002.
Slobodan Lazic: Linear Regression Models and Traffic Accident Prediction - Main Road Network in Vojvodina, Deutsches Zentrum fur Luft und Raumfahrt - IVF, Berlin, Germany, 2002.
Slobodan Lazic: Quantification of Road Equipment Influence on the Traffic Safety, International Magazine "Science-Security-Police", Belgrade, Vol.VI, No.1, FR Yugoslavia, 2001.
Slobodan Lazic: Characteristic Elements of Roads and Their Influence on the Traffic Safety-Technical Forming and Relevant Parameters, Periodical Magazine "Security", Belgrade, FR Yugoslavia, 2000.
Slobodan Lazic: Functional and Technological Components of Advanced Traveller Information Systems - ATIS, V International Symposium "Traffic Accidents Prevention on Roads '2000", Novi Sad, FR Yugoslavia, 2000.
Slobodan Lazic: Master Thesis: The Influence of Road Equipment on Traffic Safety (ITS Technologies), Faculty of Technical Sciences, University of Novi Sad, FR Yugoslavia, 2000.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1201 to 1250 of 1734)Go to Search Parameters...
Brief Description
Lean Master and Master Black belt instructor, facilitator and coach currently with BMG (Breakthrough Managemnt Group). Main function currently as Six Sigma and lean account executive responsable for the deploymemnt of Lean and Six Sigma initatives with various local and international orgenisations.
MSc Mining geology student graduating this summer. Looking for a summer project in association with a company, preferrably in exploration, hopefully leading to employment. Interests are in Gold and Ni-Cu-PGE exploration. Extensive field experience in remote areas.
Fitter, Turner, Machinist, Planner, Scheduler
I am continuing my 4 year B.Sc course in Materials and Metallurgical Engineering in BUET in Bangladesh.
Supervision construction commissioning startup air separation ,heavy oil etc.
I have 20 yrs experience as a surveyor. I was trained in the U.S. Army as a Field Artillery Surveyor. I have experience on highrise buildigs and sub-divisions. I have surveyed oil and gas pipelines and power line routes. I also worked on marinas providing layout and volume reports.
Geologist Resume
Graduating student with B.S. in Mining Engineering. Experience in Surface M/NM, Underground Coal, Underground M/NM. Extensive Computer Application background. Seeking International Employment.
Automation and Instrumentation Specialist. College diploma in industrial electronics (Teccart Institute) option: regulation, instrumentation and automation. Graduated with distinction, May 1999.
Superintendent, Rotating Equipment - Estimate manhours, design schedule, Supervise and coordinate all rotoating equipment installations.
14 yrs. in the A/E industry
Geologist
Petroleum Mechanical Engineer Project Manager Technologist Operations Mining
I did BE Mech in 1999. I've Five years Experience in Die Casting field. Experience in Design and Manufacturing of Pdc dies. My skill is to prepare the fmea meeting of designing area with checklist presentation ie. functional & design related points and then all the drgs are submitted to Mfg team.
Rotating Equipment Engineer, Maintenance Engineer, Vibration Engineer, Reliability Engineer, Mechanical Engineer
Bsc (Hons) Surveying, 5 years experience, Competent with setting out, topograghical surveys, mine surveys,cadastral surveys
Researched and implemented a 32 X 32 CMOS Image sensor using ‘Cadence cmosp18 tech. Implemented the schematic circuit design and layout for Active Pixel Sensors (32 X 32), 32 CDS units and 32 differential amplifier units.
Fast track professional, successful in field of instrument, control and electrical for installation, commissioning, repairing, maintenance, calibration and modifications of Electronic, Pneumatic, Safety, Analytic instruments. and control systems.
Experienced chemist with over ten years working in EOR/IOR projects associated to laboratory and field to the oil & Gas industry in Venezuela. Coordinated and used different analytical equipments, methodologies and facilities, following standard procedures of laboratories and operations
Free! A seasoned, highly organized construction professional with over 39 years of heavy industry experience which includes both industrial construction sites and field/shop fabrication locations in all major industries worldwide
M.Sc. in Applied Geology, with Expereince in Geotechnology and Exploration Geology, with well computer knowledge
Operations, I&C, Electrical, Startup, Commissioning Experience. 11 years of progressive technical and supervisory roles in Oil/Gass and Power Plants. Includes Gas Turbine, Comined Cycle, and Pipeline Operations.
I am an experienced Mechanical Engineer in the field of Design & Welding (IWE) Engineering. I obtained my Dipl-Ing. certificate (equivalent of MSc(Eng.) in Design and Construction of Agricultural and Construction Machinery from the Technical University of Berlin in Germany
Drafter/Designer-Entry Level with some experience
Diploma in Surveying; Profficient in SURPAC; AutoCad, Vcad
Mining Diploma, Bachelor's degree in Mining Engineering
I am trained in the mechanics and operation of back hoe, bobcat, jack hammer, dumptruck, forklift, sissor lift, crane(boom truck), delimber, and rock crusher. I also have skills with tack welding, drafting and construction.
Data manager with over 10 years of experience in the mineral exploration industry providing high quality digital tools, data and information to geoscientists. Extensive experience managing IT projects and services on an international environment. Strong analytical, organizational and technical skill
Recently graduated from 4yr BA(Hons) in Geology, looking for FIFO work in any country, flying to/from UK/Ireland. Course & dissertation work provided some fieldwork experience. French to higher Leaving Cert level. Please see personal statement in resume for more details.
Fresh Mechatronics Engineering Graduate
Oracle dba, technical support
Java, JSP, Servlet, J2EE, JSTL, SQL, PHP, ASP, XML, HTML
Can work with computers, good communication skills, team player, can work under pressure
I am a Graduate Mining Engineer with 11 years of wide experience in different Mining Operations. Currently Located at London UK.
Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)
Fitter Including Machining and Diesel Fitting
experienced electrician with vast instrumentation and supervisory experience.
CIVIL ENGINEER WITH 12 YEARS OF EXPERIENCE IN CONSTRUCTION FIELDS
• More than ten years experience in project/operation management and real estate development
Marketing and Software experience with Oil & Gas (drilling) background
graduate metallurgist and holder of BSc Min in Metallurgy and Mineral Processing from the University of Zambia with merit.Am currently working for Konkola Copper Mines (KCM) at the Nchanga Tailings Leach Plant as a metallurgist.
Iam a Mechanical Design Engineer with experience in Heavy steel structures, Pressure Vessels ( Several Types), Power Generation, Material Handling. I have quite a number of projects to my name that have been completed succesfully
I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.
I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.
I wish to introduce myself as an Automation Engineer with over 8 yrs of exp in automation field.
Instruments: GPS Trimble 4000SST/SSE,Leica S 500, ETS Sokkia Set 310, Sokkia DT510, Digital Echosounder Marimatech, Raytheon, Paleport ATG, and Curent Meter, Software: Auto CAD 14/2004, LDD 2000i, Softdesk 8, Trimble Software (Trimnet, Trimvec), Geocalc, Hidropro V.6, Surfer v.8 and Office 2000
I am a Broadcast Technician ZBC-TV in Zimbabwe. In March 2006 I completed a 4 year apprenticeship with ZBC-TV and have worked as permanent staff ever since. I am a Class One journeyman and hold a National Diploma in Electronic Communication Engineering.
I have work experience in United States, SE Asia, and China. I am a registered Professional Engineer (Civil) in State of California, USA. I am looking for a professional/managerial position in civil engineering/construction. Project experience and publications are available upon request.
Skills: Auto CAD versions 9 thru 2006i, Prime Medusa, UNIX, Micro Station, Microsoft Office, along with several other computer based applications.
25+ years Procurement, Material Control and Logistics Experience / Public and Private Corporations
1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   [ 25 ]   26   27   28   29   30   31   32   33   34   35  
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com