Resume - Fast track professional, successful in field of instrument, control and electric...

Misco Jobs

Resume #69405

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Fast track professional, successful in field of instrument, control and electrical for installation, commissioning, repairing, maintenance, calibration and modifications of Electronic, Pneumatic, Safety, Analytic instruments. and control systems.
Hands-on experience of calibration and maintenance of conventional and smart Fisher, Honeywell, Emerson, Foxboro, Yokogawa and many other companies.
Experienced on DCS "TDC 3000 & Experion PKS", E.B.I and ESD systems of Honeywell.
Experienced in designing of relay logic control circuits and PLC ladder of Allen Bradley.
Maintenance and calibration of transmitters, PID controllers, chart recorders, pressure, level and temperature switches, etc.
Maintenance & calibration of various analyzers (oxygen, moisture, PH & Multi-gas).
Configuration and maintenance of Saab radar tank gauging system.
Custody transfer system of Smith metering skids and provers.
Burner management system for boilers.
Executing FAT/SAT
Able to generate and study industrial drawings like P&ID, ILD, and PFD.
Familiar with international standards ISA, NEC, NFPA related to job
Aware of working under ISO 9001, ISO 14001 and OHSAS procedures.
I am a safety conscious person and practice HSE regulations by using PPE & PTW.

Accomplishments

Projects Completed successfully:

Migration project of DCS TDC3000x to DCS Experion PKS
SMS Radio Frequency based security management & vehicle tracking system.
Migration of conventional relay based systems to PLC (AB) based SCADA System.
Implementation of delta net FS90 (Honeywell) Fire Alarm and XL-50 based Gas Detection system and their integration with E.B.I Software
Commissioning of Radar Tank Gauging System (Rosemount Saab)
Boilers automation and burner management systems.
Completed project of Sybertrol Custody Transfer and meter proving system.

Handling current Projects:

Up gradation project of conventional Electronic and Pneumatic controlled HBU-I & HBU-II plants to State of art DCS Experion PKS System, 70% complete.
Installation and Commissioning of Double Block and Bleed valves for ESD system.
Working for implementation of CMMs (Maximo)
Working for implementation of ESD and DCS systems for Pre flash unit to enhance capacity of existing HBU-I plant from 20,000BPD to 32,500BPD
------------

OBJECTIVE:
------------
Seeking for a responsible position, challenging and carrier-oriented position as a member of maintenance team, I would like to under take exciting and challenging tasks that would effectively utilize my knowledge, further develop and enhance my skills and experience.

WORK EXPERIENCE:
------------
Sr. officer E&I:
Jan 2005 up to date Attock Refinery Limited
Rawalpindi. Pakistan
Officer E&I:
May 2002 to Jan 2005 Attock Refinery Limited
Rawalpindi. Pakistan
Executive Officer (Trainee):
May 2000 to 2002 Attock Refinery Limited
Rawalpindi. Pakistan

EDUCATION & CERTIFICATION:
------------
1997 DAE Instrument (59%)
Swedish Pakistani Institute of Technology, Gujrat

1994 Secondary School Certificate (80%)
Govt. Pilot Secondary School, Phalia

Trainings:
DCS Experion PKS (Innovative Engineering Lahore)
Safe work practices (ARL)
PLC based on SCADA System (Innovative Engineering Lahore)
Gas detection and Test Equipments (Ezzi Engineering Karachi)
Fire fighting (ARL)

Appreciations:
Quality work
Responsibility and Hard work

Software Applications:
Calibration & Size calculation programs.
Configuration Studio, Quick and control builder, display builder of Experion PKS.
RS view 32, RS Logix 5000/500, RS Links PLC (AB)
Radar Tank Gauging System (Saab Rosemount)
E.B.I Software for Fire & Gas detection
Software of security management and time information system
C++, HTML, Oracle 9i, SQL, etc; CAD 2006, Ms Office

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 1734)

Go to Search Parameters...

Brief Description

Lean Master and Master Black belt instructor, facilitator and coach currently with BMG (Breakthrough Managemnt Group). Main function currently as Six Sigma and lean account executive responsable for the deploymemnt of Lean and Six Sigma initatives with various local and international orgenisations.

MSc Mining geology student graduating this summer. Looking for a summer project in association with a company, preferrably in exploration, hopefully leading to employment. Interests are in Gold and Ni-Cu-PGE exploration. Extensive field experience in remote areas.

Fitter, Turner, Machinist, Planner, Scheduler

I am continuing my 4 year B.Sc course in Materials and Metallurgical Engineering in BUET in Bangladesh.

Supervision construction commissioning startup air separation ,heavy oil etc.

I have 20 yrs experience as a surveyor. I was trained in the U.S. Army as a Field Artillery Surveyor. I have experience on highrise buildigs and sub-divisions. I have surveyed oil and gas pipelines and power line routes. I also worked on marinas providing layout and volume reports.

Geologist Resume

Graduating student with B.S. in Mining Engineering. Experience in Surface M/NM, Underground Coal, Underground M/NM. Extensive Computer Application background. Seeking International Employment.

Automation and Instrumentation Specialist. College diploma in industrial electronics (Teccart Institute) option: regulation, instrumentation and automation. Graduated with distinction, May 1999.

Superintendent, Rotating Equipment - Estimate manhours, design schedule, Supervise and coordinate all rotoating equipment installations.

14 yrs. in the A/E industry

Geologist

Petroleum Mechanical Engineer Project Manager Technologist Operations Mining

I did BE Mech in 1999. I've Five years Experience in Die Casting field. Experience in Design and Manufacturing of Pdc dies. My skill is to prepare the fmea meeting of designing area with checklist presentation ie. functional & design related points and then all the drgs are submitted to Mfg team.

Rotating Equipment Engineer, Maintenance Engineer, Vibration Engineer, Reliability Engineer, Mechanical Engineer

Bsc (Hons) Surveying, 5 years experience, Competent with setting out, topograghical surveys, mine surveys,cadastral surveys

Researched and implemented a 32 X 32 CMOS Image sensor using ‘Cadence cmosp18 tech. Implemented the schematic circuit design and layout for Active Pixel Sensors (32 X 32), 32 CDS units and 32 differential amplifier units.

Fast track professional, successful in field of instrument, control and electrical for installation, commissioning, repairing, maintenance, calibration and modifications of Electronic, Pneumatic, Safety, Analytic instruments. and control systems.

Experienced chemist with over ten years working in EOR/IOR projects associated to laboratory and field to the oil & Gas industry in Venezuela. Coordinated and used different analytical equipments, methodologies and facilities, following standard procedures of laboratories and operations

Free! A seasoned, highly organized construction professional with over 39 years of heavy industry experience which includes both industrial construction sites and field/shop fabrication locations in all major industries worldwide

M.Sc. in Applied Geology, with Expereince in Geotechnology and Exploration Geology, with well computer knowledge

Operations, I&C, Electrical, Startup, Commissioning Experience. 11 years of progressive technical and supervisory roles in Oil/Gass and Power Plants. Includes Gas Turbine, Comined Cycle, and Pipeline Operations.

I am an experienced Mechanical Engineer in the field of Design & Welding (IWE) Engineering. I obtained my Dipl-Ing. certificate (equivalent of MSc(Eng.) in Design and Construction of Agricultural and Construction Machinery from the Technical University of Berlin in Germany

Drafter/Designer-Entry Level with some experience

Diploma in Surveying; Profficient in SURPAC; AutoCad, Vcad

Mining Diploma, Bachelor's degree in Mining Engineering

I am trained in the mechanics and operation of back hoe, bobcat, jack hammer, dumptruck, forklift, sissor lift, crane(boom truck), delimber, and rock crusher. I also have skills with tack welding, drafting and construction.

Data manager with over 10 years of experience in the mineral exploration industry providing high quality digital tools, data and information to geoscientists. Extensive experience managing IT projects and services on an international environment. Strong analytical, organizational and technical skill

Recently graduated from 4yr BA(Hons) in Geology, looking for FIFO work in any country, flying to/from UK/Ireland. Course & dissertation work provided some fieldwork experience. French to higher Leaving Cert level. Please see personal statement in resume for more details.

Fresh Mechatronics Engineering Graduate

Oracle dba, technical support

Java, JSP, Servlet, J2EE, JSTL, SQL, PHP, ASP, XML, HTML

Can work with computers, good communication skills, team player, can work under pressure

I am a Graduate Mining Engineer with 11 years of wide experience in different Mining Operations. Currently Located at London UK.

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

Fitter Including Machining and Diesel Fitting

experienced electrician with vast instrumentation and supervisory experience.

CIVIL ENGINEER WITH 12 YEARS OF EXPERIENCE IN CONSTRUCTION FIELDS

• More than ten years experience in project/operation management and real estate development

Marketing and Software experience with Oil & Gas (drilling) background

graduate metallurgist and holder of BSc Min in Metallurgy and Mineral Processing from the University of Zambia with merit.Am currently working for Konkola Copper Mines (KCM) at the Nchanga Tailings Leach Plant as a metallurgist.

Iam a Mechanical Design Engineer with experience in Heavy steel structures, Pressure Vessels ( Several Types), Power Generation, Material Handling. I have quite a number of projects to my name that have been completed succesfully

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

I wish to introduce myself as an Automation Engineer with over 8 yrs of exp in automation field.

Instruments: GPS Trimble 4000SST/SSE,Leica S 500, ETS Sokkia Set 310, Sokkia DT510, Digital Echosounder Marimatech, Raytheon, Paleport ATG, and Curent Meter, Software: Auto CAD 14/2004, LDD 2000i, Softdesk 8, Trimble Software (Trimnet, Trimvec), Geocalc, Hidropro V.6, Surfer v.8 and Office 2000

I am a Broadcast Technician ZBC-TV in Zimbabwe. In March 2006 I completed a 4 year apprenticeship with ZBC-TV and have worked as permanent staff ever since. I am a Class One journeyman and hold a National Diploma in Electronic Communication Engineering.

I have work experience in United States, SE Asia, and China. I am a registered Professional Engineer (Civil) in State of California, USA. I am looking for a professional/managerial position in civil engineering/construction. Project experience and publications are available upon request.

Skills: Auto CAD versions 9 thru 2006i, Prime Medusa, UNIX, Micro Station, Microsoft Office, along with several other computer based applications.

25+ years Procurement, Material Control and Logistics Experience / Public and Private Corporations

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out