Resume - As shown in my resume, i have a bit of experience in Petroleum Refinery and as ...

Misco Jobs

Resume #70111

CONTACT INFORMATION:
View contact information...

OBJECTIVE To get further experience in Chemical Engineering fields
And to apply my knowledge and experience.

STATUS Permanent Residence (Greencard Holder)

EDUCATION

M.S in Chemical Engineering 2007-Present
Northeastern University, Boston, MA

Graduate Certificate in Biotechnology & Bioprocess 2005-2007
University of Massachusetts, Lowell, MA

B.S in Chemical Engineering 1997-2002
Kwame Nkrumah University of Science and Technology
Kumasi, Ghana
Senior Secondary School Certificate 1993-1996 Swedru Senior Secondary School, Agona, Ghana

INTERNSHIP
EXPERIENCE
PROCESS ENGINEERING INTERNSHIP,1999-2000
Tema Oil Refinery (TOR), Tema, Ghana
* Process control of process parameters
* Catalyst Efficiency evaluation
* Energy and material balance calculations
* Determination of feedstock properties (API-Gravity, sulfur content, Pour Points, Carbon Residue, Salt Content, characterization factors, Distillation Range and desalting)
* Create Distillation Curves,
* Application of statistical data control in the are of experimental design and lean sigma.
* Economic evaluation, analysis and Cost Estimation

WORK
EXPERIENCE
Senior Manufacturing Technician, January 2008-Present
Kelly Engineering (Wyeth Pharmaceutical), Andover MA
* Writing SOP's for various unit operation equipment and processes
* Operating manual chromatography skids
* Performing CIP and SIP
* Work with Process development group on Process specifications, system transfer, scale-up, validation and shake down
* Training New hires

Purification Associate, May 2007- Dec 2007
Biogen Idec, Cambridge, MA
* Operate various Automated and Manual chromatography Skid
* Ran Ultrafiltration and Diafiltration systems
* Work on CIP and SIP Systems
* Operate various process control systems
* Work with Process development group on Process specifications, system transfer, scale-up and validation,
* Follow SOP's to operate various purification systems under Aseptic and cGMP environment for documentation.
* Prepare Buffer solutions
* Follow protocol to perform change-in and change-out operations before and after each campaign.

LABORATORY TECHNICIAN, 2004-2007
Astrazeneca Pharceuticals, Waltham, MA
* Solubilizing compounds in DMSO and other solvents.
* Following instructions to execute laboratory automation and trouble shooting
* Compound reagent management
* Calibrated laboratory balances
* Using HPLC
* Ordering of dry compounds, solutions and delivery
* Maintain accurate compound inventory in pharmaceutical library

District Coordinator, 2002-2003
Environmental Protection Agency, Accra, Ghana
* Ensured that companies within district follow EPA code
* Worked with the World health Organization (WHO) to solve some health problems.
* Prepared technical reports
* Problem-solved to create solutions for companies with serious pollution issues
* Worked in conjunction with the town council to assist towns with sewage and drainage problems

LANGUAGE
SKILLS (reading, writing and speaking)
* English
* Akan
* Ga

COMPUTER
SKILLS Advanced proficiency in Microsoft Office software including:
* Word
* Excel
* PowerPoint

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 1758)

Go to Search Parameters...

Brief Description

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Assignments in Mould Design / New Mould manufacturing / Mould repairing / Reverse Engineering / New Product Development / Quality Management with a growth oriented organization of repute

I have about 2 years experience as a Geologist.

Free! Lead Electrial Planner, Safety & Environmental Manager, QA Manager

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

PLANNER SMELTER

AutoCad Mechanical Desktop AutoCad Inventor 3D Modeler

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

analyst

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry

7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

I did both undergrad and master's in mechanical engineering with broad range of experiance both in mechanical engineering along with IT

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

10 Years Working As A Cartographer For QARUN Petroleum Company

As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

Instrumentation project management/Instrumentation designer

Management Graduate with Bachelors in mining engineering, excellent knowledge of SAP, Internet, Microsoft office etc. Sales in Oil and Gas, Energy sector, Training Expert. Good experience of handling people.

Bachelor degree of Business Administration graduate and very well know MS - Office, other computer languages also.

Working experience - 16 years & 3 months. Highly skilled, experienced, expertise and knowledge as a driller

Plant operations supervisor / trainer, remote overseas locations

A fully qualified GIS specialist with experience in the delivery of major asset management projects. Adaptable to business requirements, with management experience. Well versed in the use of ESRI ArcGIS 9.1, WINGS 2.4.10, AutoCAD 2008, Corel Paint Shop Pro XI. IT literate.

E-Business,E-Tendering,International Business Development

Desired employment / Occupational field Financial & Economic / Project Analyst

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

I am a young energetic Mechanical Engineer with hands-on experience in Upstream Oil and Gas industries and Masters degree in Project Management from National University of Singapore. I came to Singapore to gain the best of knowledge of the industry and the field exposure so as to increase my profess

A result oriented professional with over 15 years of cross functional experience in Sales & Marketing, Business Development, Techno-Commercial operations and handling timely Project Supplies

Strong knowledge in electronics industries PCB design, assembling, trouble shooting

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.

5 years experiences in Project Controls Engineer specifically with Cost & Planning engineering on major projects valuing approximately $4.5 Billion. I have experience in all phases of engineering, procurement, construction and have been involved in a wide variety of different contract PMC & EPC

Multi-skilled operator, decision making

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

ULLS-G, TAMMS, maintenance supervisor, mechanic, Bradley Vehicle, light track, wheeled vehicle, AOAP, ASE, MVAC, maintenance Manager, QA/QC,

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Eletro/Mechanical Technician, Applications Engineer

Pro Engineer 2+ years experience

Managementskills NQF level 6,NQF level 4, operationalskills NQF level6,Facilitationskills,trainingskills,computerskills

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

Enthusiastic recent graduate with a BS in Geology looking for a full time entry-level position where I can utilize my knowledge of geology and recently learned skills. Graduated with Departmental Honors and a 3.39 GPA in geology courses.

Geotechnical, Geological Exploration, Resevoir geologist

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out