Resume - Renwable Energy Expert

Misco Jobs

Resume #74797

CONTACT INFORMATION:
View contact information...

I am a Mechanical Engineer in Energy Systems with very good experience in design, analysis and quality control, specializing in the renewable energies.
I am proficient working and reading engineering drawings.
The enclosed resume summarizes my background in Energy Systems, High Gas Temperature Measurements.

As a person who enjoys working as a team, I feel I will be a valuable asset.
My potential to be of service to an organization can be more fully demonstrated in a personal interview. I look forward to hearing your comments.

Summary of Qualification:

. Three years experience in participating in different projects of the civil engineering environments.
. Highly skilled in using softwares like, Matlab, WindPro, COMFAR III and Microsoft Office
. Familiar with different parts of the Power Plants, Waste to Energy Plants.
. Familiar with different high gas temperature measurement sensors which are used in power plants and able to work with them.
. Familiar with Renewable Energy Systems such as Solar Energy, and Wind Energy Systems.
. Skilled in Energy Management and Energy Auditing.
. Familiar with different kinds of Road Machineries.
. Have a report in WWEA (World Wind Energy Association) international book 2007/2008
. Excellent team player, hard working, adaptable, detail oriented, accurate and quick learner.
. Fluent in reading, writing and speaking English, German, Turkish and Persian.
. Passing IELTS Exam with acceptable grade.

Education:

MASTER OF SCIENCE DEGREE IN ENERGY SYSTEMS ENGINEERING 2005
Aachen University of Applied Sciences Germany.

- Electrical Engineering: (AC-DC, DC-AC, Over Head Lines, Cables, Switchers)
- Renewable Energies Power Plant: contains all types of renewable energies power plant installation and sections information
- Advanced Control Systems: (Different Linear Control Systems And Making The Simulation With Matlab)
- Applied Thermodynamics And Heat Transfer
- Business Administration, Management And Organization
- Renewable Energies: ( Solar, Wind, And Biomass Energies)
- Mathematical Tools And Simulation: (Vector Spaces, Matrix, And Simulation With Matlab)….

Master Thesis:

- Simulating a power plant furnace in labor dimensions
- Constructing the furnace
- Installing the different types of temperature measurement sensors (contact and non-contact types)
- Temperature measurements
- Comparing the results

BACHELORE OF SCIENCE DEGREE IN MINING ENGINEERING 1999
University Of Tehran, Iran.
Thesis topic in Feasibility Study of a Sodium Sulfate Mine in Iran.

Work Experiences:

- Participating in Road Machines Filters marketing in the Cooperative Organization of companies in 1995 - 1996

FIELD ENGINEER
SAKHTEMANHAYE DARYAI CO. 1999-2003

This company makes contracts for constructing different projects in Iran.
. Participating in constructing Kerman University.
. Participating in constructing Jiroft University.
. Participating in constructing Mahan research center.

My activities in these projects were mostly in checking the engineering designs and maps, also controlling the construction procedure.

ENERGY EXPERT IN SOLAR AND WIND ENERGIES
RENEWABLE ENERGY ORGANIZATION OF IRAN (SUNA) FROM JANUARY 2007

. Shiraz Solar Thermal Power Plant Project with 250KW Capacity
- Curving process of mirrors
- Installing absorber tubes
- Operation of the power plant & steam generation

. Manjil Wind Power Plant with 100MW Capacity
- Wind turbine installation procedures such as, foundation, tower, blades and nacelle equipments
- Operation of the power plant and electricity generation
- Economic study of the power plant

. Report in latest WWEA International Book 2007/2008
. Studying new technical achievements all around the world in renewable energies
. International Affairs Expert
- Connection with foreign companies in solar and wind energies

Membership:
. Alumni of Faculty of Engineering.

References:
. Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 1758)

Go to Search Parameters...

Brief Description

Experience in Metrology and Quality Assurance, Instrumentation and Process Control. MSc. In Applied Physics - University of Zimbabwe

Land surveyor, Road, Stormwater, Sewer, Subdivision designer

Metallurgical Engineer

Career Objective: To contribute to the growth of mining industry in a position where I will have opportunities to utilize my interpersonal and professional skills to apply my knowledge and experience in mining technology.

I have 23 years of experience in a combination of skills including electrical troubleshooting, installations and repairs, PLC programming (AB, GE, Siemens) and installations, HMI programming and installations, Supervision and Project Management.

Metallurgical Engineer, Project Engineer, Operations Manager, Primary metals, petrochemicals.

management of R&D programmes, technology strategy, consulting and evaluation

Visionary leader leadership. P&L management, operations management, change management, strategic business planning, acquisitions and merges, mentoring and couching and globalproduct management.

Mechanical background with over 18 years of hands-on, field service experience working on Heavy Earth Moving Equipments, Construction Equipments, Deep Well Drilling Equipments, Marine Vessels and Liberation Plants amongst many others.

Computer Added Design

I am an experienced mining engineer in the field of coal as well as stone mine.

Several Years experience as drafter, on board last 15 on AutoCAD

Managing Mine Resources, Maintenance Planning, Mine Start-Up,

20+ years in Control Systems Engineering/Design. Experienced Intools user.

Metallurgist and Materials engineer with 3 years of experience. Wide range of skills in metallography techniques, SEM, TEM, Stastical tools and design softwares. Good communication and presentation skills. Published papers in journals and presented work at conferences.

I seek a position that will give me an opportunity to develop project strategies that enhance efficiency through the implementation of cutting-edge technologies, efficient application designs and intelligent reporting practices.

professional seeking new challenges.

Quality assurance, reserch and development. Section - Process control in charge, shift in charge

Renwable Energy Expert

Young geologist looking for Interesting Career

Graduate Surveyor, December 2008, Western Australia. Looking for mining jobs. Not limited to any location in Western Australia

Sr Structural Designer / PDS FrameWorks Coordinator and project set up.

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

PROFILE: A self-motivated and hard working Geologist with experience in Mining and Exploration of gems, precious metal and industrial metals. A capable leader, able to use own initiative and work as part of a team.

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

10 years experience of geotechnical investigation and environmental remediation

Controls & Instrumentation Engineer/Sr. technician with experience in GE gas turbine controls - (MK II, MK IV, MK V & MK VI), boiler & steam turbine control and protection, DCS, PLCs and instrumentation. I have a total of 15 years experience in the field of controls & instrumentation.

Entry level geologist

Having graduated from The University of Ballarat, Bachelor of Mining Engineering, I am still studying at this moment, and would like to gain some working experience to have a better knowledge about this vigorous industry before my graduation in 2008.

Bachelor degree of computer science and Seeking a challenging position, where my technical and communicational skills can be utilized and developed in field of software or quality assurance

Entry Level Mining Engineer

Mining Engineer Seeking employment in the mining industry that will allow career growth and the opportunity for advancement.

Geological Engineer, mapping, petrography, reserve estimates, exploration, mining, import/export, well drilling, GPS, logging, geoframe, geographix, excellent vocational English, MS Office, MBA in Business Administration, Experience in Marketing

Masters student in Materials Science and Engineering with BS in Applied Physics seeking engineering related position after graduation in Spring 2002.

FIELD OF SPECIALISATION (a) Design of method of extraction of pillars and their stability. (b) Design of support system for coal mines. (c) Multiple-seam coal mining. (d) Strata behaviour in Blasting Gallery method. (e) Design of supports and strata behaviour in Hydel Power Projects.

Process Engineer Graduated with a First Class from the University of Leeds 3-4 years experience of production, technical, commissioning and project management

Mineral Processing Engineer(16 yrs exp.)10 yrs as mill sup't in Cu,Zn,Au,Ag operations. Personnal traits: team leader, flexible, resourceful, team-oriented, good communicator. Skills: technical & managerial aspects of planning, operation, projects, budget, processes, training, HSE

Marine 1.Engineer Officer Certicate, 8 years experience with mechanical maintenance and as a watchkeeping engineer in the engine control room

I am a self motivated and ambitious Tanzanian holding a Bachelar of Science Degree in mining engineering who can work under pressure. I have got the basic skills in computer and user of Vulcan software.

To be a part of organization which enables me to cope-up with emerging as well as the latest trends and provide me scope for widening the spectrum of my knowledge.

HEAT TREATMENT METALLURGY

Quality, Environmental and Occupational Health & Safety Management Systems specialist, ISO 9001:2000 Lead Auditor, Quality Circles, Six Sigma, Use of Statistical Tools, Training, Auditing etc.

A mining engg from indian school of mines, currently I am working in NMDC an iron ore company, I am in charge of operation and safety aspects in the comapny,

Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)

Experienced in running a safe, productive, team based work place and the use of maintenance planning and recording computer systems. Have knowledge and understanding in heavy equipment and shop maintenance. Excellent in heavy equipments electronic engine, hydraulic and electrical troubleshooting.

Civil Engineer with an experience of 15+ years in IT area, managing, supervising, consulting and delivering IT solutions for the Oil and Coal Industry. Knowledge and experience in strategic planning, project management, e-learning, and Process Reengineering. Good HR activities and knowledge

2nd year of mining students.

One year and nine months of domestic mining experience, in a open cut, shovel/truck coal operation. Experience include, long term planning, road design, dump design, Pit design, scheduling, cost estimate, pit production supervisor of Shovel P&H and O&K fleet.

Mining Engineer, Programmer, Mineral Project Evaluation, CTL and GTL Technologies

Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.

1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out