Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #76980 next resume »»
CONTACT INFORMATION:
View contact information...

EXPERIENCE

6/07 – Present, GEOLOGIST/INSPECTOR, Kleinfelder, Las Vegas, Nevada
Observe grading operations, drill shafts and soil nails at McCarran Airport. Log soil and core borings and trenches. Perform perc tests. Perform GPS survey for SNWA pipeline. Map earth fissures.

4/07 – 6/07, GRADING INSPECTOR, Angle Engineering, Las Vegas, Nevada
Observe grading operations for residential and hillside developments with problem soils. Perform density/moisture tests.

10/05 – 4/07, GEOLOGIST, PSIUSA, Las Vegas, Nevada
Perform core logging for mountainous subdivision and road cuts to identify landslides near the Wasatch Front. Installed inclinometers in landslide areas. Observe grading operations for commercial, residential and hillside developments in Las Vegas. Observe fabric lining of channel, installation of rockery walls, and trenching for utilities. Perform density and percolation tests.

3/05 – 10/05, STORM WATER INSPECTOR, Paradigm Engineering, Las Vegas, Nevada
Inspect residential and developmental construction sites for storm water compliance.

6/03 – 2/05, CONTRACT GEOLOGIST, CivilWorks, Las Vegas, Nevada
Conduct Phase 1 and 2 environmental site assessments and write reports.

10/02 – 3/03, GEOLOGIST, ONSITE / KHM Environmental, San Jose, California
Logged and sampled drill cuttings and measured VOC's with PID, installed monitor wells for Shell Service Stations in California and Nevada as part of their groundwater assessment program.

6/02 – 9/02, GEOLOGIST, ONSITE / SCS Engineers, Las Vegas, Nevada
Measured water levels and installed transducers in wells. Downloaded dataloggers. Performed GPS surveys and calibrated methane monitoring equipment at the Sunrise Mountain Landfill.

11/98 – 3/02, CONTRACT GEOLOGIST, Nye County Nuclear Waste Repository Project Office, Pahrump, Nevada.
Logged and sampled drill cuttings, installed monitor wells and Westbay systems, and assisted with pump tests for the Early Warning Drilling Program to monitor possible down-gradient contamination from the proposed Yucca Mountain repository. Canvassed wells and measured water levels in the Pahrump and Amargosa Valley area. Prepared procedures.

3/97 - 9/98, SENIOR GEOLOGIST, SAIC, Yucca Mountain, Nevada.
Logged and sampled core from underground and surface drilling operations and instructed other geologists on QA procedures. Performed duties of drilling engineer.

3/95 - 3/97, GEOLOGIST, Agapito Associates, Yucca Mountain, Nevada.
Performed construction monitoring of 25-foot diameter exploratory tunnel for high-level radwaste repository. Provided design verification for tunnel support through rock mass quality data.

6/92 - 9/94, GEOLOGIST, Raytheon Services Nevada, Mercury, Nevada.
Collected, interpreted, and reported geotechnical data in support of site characterization studies for low level radioactive waste management sites including collapse zones and chimneys beneath nuclear-generated craters. Supplied geologic support to Odex drilling, instrumented pilot wells, sampling, and testing phases of program. Containerized waste for shipping. Measured water levels, collected water samples, and performed recovery tests. Tested samples for volatile hydrocarbons, radioactivity and magnetic susceptibility. Performed geologic mapping and sampling of trenches. Prepared test plans, SOPs, and wrote reports.

1/85 - 3/92, STAFF GEOLOGIST, Sergent, Hauskins & Beckwith (AGRA), Phoenix, Arizona.
Supervised geotechnical and hydrogeologic investigations for buildings, dams, storage tanks, highways, transmission lines, pipelines, landfills, sewage treatment plants, power plants, low-level radioactive disposal sites, leach pads and mining facilities in Arizona, California, Nevada, Utah, Texas, Colorado and Wyoming. Field functions included sampling and logging of soils and rock, trench logging, geologic mapping, fault investigations, landslides and rock falls, installation and development of monitor wells, pump testing and permeability testing. In addition work was performed on underground storage tank removals and evaluations of aggregate and borrow sources. Office functions included report writing, slope stability analysis, applying for well permits and variances, writing environmental site assessments, mine permits, preparing request for proposals, QA/QC procedures, budgets and schedules.

1/83 - 1/85, CONSULTING GEOLOGIST, Elko, Nevada.
Performed gold exploration using drilling and geophysical methods. Staked mining claims. Drilled, blasted, loaded and hauled rock for rip rap. Inspector for a 34-lot subdivision. Prepared inventory of water resources and collected and ran field tests on water samples for the B.L.M.

4/81 - 1/83, SENIOR GEOLOGIST, Eisenman Chemical Company, Elko, Nevada.
Developed two major barite deposits. Performed core logging, geologic mapping and geophysical surveys. Calculated ore reserves and prepared mining plans. Evaluated barite, hematite and bentonite prospects in Nevada, California and Texas.

7/75 - 4/81, ENGINEERING GEOLOGIST, Bechtel Civil & Minerals, San Francisco, California, Bethesda & Gaithersburg, Maryland.
Supervised all aspects of subsurface investigations for power plants and other structures throughout the United States and St. Croix. Office functions included preparation of proposals, schedules, budgets, specifications, geotechnical reports and responses to Contractor's claims for differing site conditions. Field activities consisted of core logging, supervising the installation for monitor wells and piezometers. Performed pump tests and permeability tests including packer, falling head and constant head tests. Monitored blast vibrations and supervised and monitored instrumentation to measure rock and soils movement including strain gauges, inclinometer and extensometers. Conducted extensive geologic mapping of excavations and tunnels for the Washington, D.C. and Boston rapid transit systems.

12/74 - 7/75, EXPLORATION GEOLOGIST, Phillips Petroleum, Casper, Wyoming.
Conducted uranium exploration in the Powder River Basin. This included logging drill holes, assessment work, interpreting geophysical well logs and calculating ore grade and reserves.

4/72 - 8/74, ENGINEERING GEOLOGIST, Bechtel Power Corporation, Norwalk, California.
Supervised subsurface investigations for nuclear and coal-fired power plants, cooling ponds and dams. Performed geologic mapping, soils and core logging, trench logging and geophysical well log interpretation. Conducted exploration for rip rap, limestone and lignite. Correlated coal seams, prepared isopach and structural contour maps and calculated reserves for Kaiparowits coal deposit in southern Utah. Conducted reclamation and reseeding of area.

9/70 - 1/72, SENIOR GEOLOGIST, Hall, Relph & Associates, Pty. Ltd., Sydney, Australia.
Conducted exploration for sedimentary uranium deposits including siting of drill holes, logging core and drill cuttings and geophysical well log interpretation. Performed geochemical surveys.

6/69 - 7/70, EXPLORATION AND MINING GEOLOGIST, Milchem Inc., Battle Mountain, NV. Responsible for all aspects of exploration and development of barite properties, including siting drill holes. logging core and cuttings, geologic mapping, surveying, claim staking, assessment work, ore grade control, blasting, geophysical surveys and metallurgical testing. Also evaluated barite, fluorite, gold, silver and mercury prospects.

EDUCATION
B.S. Geology, University of Nevada, Reno, 1969
REGISTRATIONS, LICENCES & CERTIFICATIONS
Professional Geologist: Alaska, Licensed Monitor Well Driller: Nevada. OSHA 40-Hour HAZWOPER. MSHA 24-Hour Surface Mining, Portable nuclear gauge and Hazmat certificates. SWPPP Inspector certification. Clark County, NV approved grading (G) and drill shaft (R) inspector

View contact information...
«« previous resume next resume »»
Search Results (Resumes 751 to 800 of 1873)Go to Search Parameters...
Brief Description
Surface 04 card, Equipment operator, Electrician, Control room, Foreman
Offshore Geological Specialist
20+ years of international experience in the study, process design, engg., procurement & project management & operations. Having led multifunctional teams for EPCM for hydrometallurgical( Leaching, SX-EW), benificaition & pyro( Smelter & Electro refining) for copper, Cobalt, zinc and lead metals.
Discovered 2 World Class & 2 Medium Size ore deposits - base and precious metals, gold, platinum, iron, open pit, under developed contries, Spanish, Portuguese, English, reg mining engineer & geologist USA & Brazil, Central & South America, Africa, Amazon, excellent Vice President, General Manager
Skills: Characterization, heat treatment, basic computer work. Education :Masters in Material Science & Engineering, Bachelors in Metallurgy. Two related projects and one metallurgy internship.
I am very interested in seeking employment as a field Exploration Geologist. I have field experience including long hours in the jungle, desert and arctic that involved mapping, unit description, sample collection and claim staking. I speak Spanish.
I hold a work permit for South Africa.I have eleven (11) years experience in multidisciplinary drawing offices with Zimbabwe Alloys, BOC GASES, Manhattan mining and TMP Process Plants. My skills are in designing and drawing (for heavy engineering equipment, petro-chemical plants, production plants,
Mining/Mechanical Engineer with 5+ years experience, with a background in Environmental Engineering seeking employment.
Well qualified Geologist, with three years active experience in open cast mining and quarry operations, raw materials reserve exploration, estimation, mine and project planning, scheduling. Including also mobile plant allocations.
An Engineer with a wide range of experience in the Mining / Engineering industry. Able to work on own initiative and as part of a highly efficient team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.
To work in a dynamic and innovative environment where challenges and Development is highly encouraged. To transform my acquired skills, education and experience to solving real life problems
I am currently employed at Yenter Co., a regional drill and blast contractor. For two summers and one semester, I worked at North Antelope Rochelle Coal Complex in Gillette, WY as an engineering intern. I am proficient with AutoCAD, Vulcan, and several other softwares.
IM Supervisor, DM Manager, Expediter, Technical Writing skills in authoring procedures, Business Development with Green conceptual ideas
Supervisor maintenance and of trades/millwright / mechanic/water/rail
A results-focused manager and leader who drives project teams to deliver outstanding results. Professional Engineer with 21 years of diverse experience in the hydrocarbon processing and minerals processing industries. Has exceptional experience on owner & EPCM teams.
Heavy Industrial Fitter with extensive experience on Fixed & Mobile Plant & Machinery. I have worked in Cross Cultures as a Mechanical Trainer/Supervisor.
Master of Science in Geology and MBA from a leading Australian Business School. Having 25 yrs experience in mining industry in exploration, mining geology, financial analysis, consultancy and feasibilty reports and financial studies
Strong engineering management and design background with a broad range of skills including: construction management, process plant design, subcontractors management, mechanical equipment specifications, project controls, material handling design including barge loading and unloading, AutoCAD
Geologist / Geotechnical engineer
industrial electrician, locomotive electrician, locomotive test electrician
Over six years of experience in geotechnical engineering including earthquake engineering and mining engineering. Has performed numerous analyses in ground deformation, lateral spread and foundation settlements caused by static and seismic loading using both traditional analytical methods and advanc
Mining Engineer From PT Freeport Indonesia
Broad knowledge base and experience in both the design and construction of oil and gas facilities. Forward thinking individual with the ability to take on many tasks at one time. Motivated leader focused on building strong professional relationships.
Three years of domestic mining experience, and one year of international experience in South Africa, including strong technical skills with Mincom Minescape software applications and other packages like Talpac, Xpac, Xeras. Focusing in be efficient and effective
Qualified Quality Represetative from Germany and Metallurgist.
Open Pit Slope Design, Tailings Dams, Plant Foundation Investigations, Earthworks
Engineer looking for job in Los Angeles area.
Bachelor of engineering degree in metallurgical and materials engineering (b.eng). grade: second class upper division.
x
Qualification: B.E (Mining Engineering)
Experienced Project Manager/Engineer
Diploma in Mining Engg, AMIE Sec A&B in Mining Engg from IEI.
Junior geologist with keen interest in exploration geology, especially in field work.
Responsibilities include the organisation and planning of all engineering work to be carried out on a daily basis also planned shutdowns, within the Milling and Crushing circuits.
Mine Manager, diamond mine. Work in Angola for 6 years, Excellent knowledge of Pans, DMS, Xray machines, Screens, Crushers, Flotation (Zn, Pb, Cu,Platinum), Spirals, Nelson concentrators, Spreak/read/write English, Afrikaans, Fanakalo,Portuguese
Mining engineer and experienced manager with over 20 years of successful executive management, project development, engineering, construction and operations experience in the mining, tunneling, fossil power, rail and heavy construction sectors.
Construction Management professional with Heavy Industry ,Power, Energy, Mining sector experience
Holder of a Mining Engineering degree who is well knowledgeable in aspects of development, production, shaft operations, budgeting and cost control, mine planning and scheduling and ground control management practices coupled with an outstanding safety record and excellent leadership skills.
I am actively seeking a position in the mining industry where I can utilize my pedigree education from Colorado School of Mines and get back to studying and working in the field that I am most educated and best suited for. I have 3 years experience as a lead engineer.
I am looking for an entry level Geologist position starting in the near future. I have been attending Simon Fraser University for 5 yearsand recently completed a Bachelors of Science. I've worked in mineral exploration for the past two summers in northern BC
LARGE AND STRATEGIC PROJECTS MANAGEMENT - BUSINESS AND OPERATIONS MANAGEMENT
12 Years experience in civil engineering, design, procurement, construction & supervising of particular relevance to the project are as follows :
10 Year Experience, 5 years Implementing SAP FI/CO and BW / BI / Netweaver Solutions for Banking, Manufacturing, Sea port industry, Maintaining SAP BW Solution for Oil and Gas Industry
I am a geologist with multidisciplinary experience, including experience in geotechnical engineering, mining, exploration, tunneling, groundwater, drilling, environmental and construction monitoring. I am a licensed monitor well driller in Nevada and OSHA Hazwoper, MSHA, SWPPP and nuclear gauge cert
Gold Mine Mill Foreman
Land surveying relating to boundaries, design, construction, and mapping.
Motivated, proven performer with a 17 year record of demonstrated success in Operations Management, Project Management, Distribution/Logistics Management, and Mechanical Engineering across multiple fields from Military Operations, Municipal Management, Telecommunications, Software Development, Call
Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.
Professional Sales Person with a sound Technical background. “Hands On” approach. A proven track record of strategic business planning, financial & corporate leadership experience conceptualizing ideas, seizing opportunities, building operations, leading highly successful new business development in
A metallurgy n materials engineer with 3.5 years of experience in the field of Metallurgy, QA, Heat Treatment and Inspection & Testing. Worked with various international standards viz. ASTM, ASME, NACE, EN ISO and DIN, also well versed with customer specific standards like Aramco, Shell MESC etc.
1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   [ 16 ]   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38  
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com