Resume - I started my career in 1991. I am a qualified fitter & turner (trade) Currently ...

Misco Jobs

Resume #77142

CONTACT INFORMATION:
View contact information...

Years of Experience: 17 years Present Location: South Africa

Expertise

Category Subcategory Ability Experience
Artisan Mechanical & Experienced 17 years
Maintenance
Technician Level Mechanical & Experienced 13 years
Maintenance
Management / Mechanical & Experienced 5 years
Foreman Maintenance

PERSONAL PROFILE

I have a total of more than 17 years experience in oil and gas sector (Petro SA) onshore. I started my career in 1991 and after serving a full apprenticeship, I qualified as a fitter & turner. The majority of this time I spend in the machine shop, valve shop, turbine shop and on site. This equipped me with excellent skills and knowledge in the petrochemical sector.

In 2007 I made a career change; I was offered a senior position as a researched and development foreman (TMS Group Industrial Cleaning). Still working hand in hand with the petrochemical sector (Sasol, Engen, Sapref refineries).

I am of opinion that the diversity in my career has equipped me with the required skills to meet all standards. I regarded myself as an excellent leader and a good team player, accepting criticism and dealing calmly and effectively with high stress situations.

I approach my work in a safe and professional manner; my goal is to add value to an organization by using my skills abilities to the advantage of the organization.

CAREER HISTORY

PERIOD: COMPANY NAME: POSITION HELD:

1991 to 1995 Petro SA Apprenticeship

* Served a full apprenticeship at Petro SA (petrochemical refinery)
* Spend my time in machine, valve, and turbine shop; where I learned all the necessary skills to become an artisan.
* This skills included all the measuring equipment (verniers, micrometers ect.)
* Marking off, drilling holes.
* Learning thread cutting (metric, imperial, acme and trapezoidal)
* Assisting in overhauling pumps (single and multi stage pumps etc.)
* Alignment of pumps and motors.
* Stripping and assemble of valves (gate valves, boll valves, psv's, etc.)
* Basic turning and milling.
* Drill shapner machine, tool and cutter grinder and basic surface grinding.
* Basic programming.

PERIOD: COMPANY NAME: POSITION HELD:

1995 to 2007 Petro SA Qualified - Fitter & Turner

* Turning and milling operations that require complex calculations, very close tolerances with a range of materials, with minimal supervision.
* Interpret and produce complex engineering drawings and job/work instructions.
* Apply quality check on machined components.
* Adhere to safety rules and regulations (occupational health and safety etc.).
* Understanding of safe work procedures.
* Internal and external grinding of complex components (cylindrical grinder).
* Horizontal boring and vertical boring (gate valve seats and wedges) using a range of accessories and tools.
* Tool and cutter grinding.
* Surface grinding to tolerances.
* Programming and operation of all the following cnc machines.
* Cnc turning – Mazak Quick turn 32 - Mazatrol T32/2 controls
Mazak 150, 200 - Lexis nexis controls
* Cnc Milling – Sachmann - TNC 355 controls Heidenhain
* Boring mill - Union - iTNC 530 controls Heidenhain
* Machining of all plant related jobs.
* Ensure adherence to quality standards and maintaining all related documents.
* Servicing and maintaining single and multi stage pumps.
* Maintain gearboxes.
* Refurbish machines.

* Servicing and maintaining and testing valves this includes safety valves.
* Basic experience in maintaining compressors.
* Perform preventative / proactive maintenance.
* Working strictly to permit procedures and followed correctly.
* All work done safely within time limits and according to ISO standards.
* Involved in shutdowns and break down jobs.
* Done six shutdowns as a supervisor in the time I worked for Petro SA.

PERIOD: COMPANY NAME: POSITION HELD:

2007 - current TMS Group Industrial Services Research & Development
Foreman

* I am currently in charge of a workshop where we do manufacturing and designing on high pressure equipment. This equipment is used by us on the refineries.
* Working strictly to ISO 9001: 2001 (international standards),
* NOSA 14001:2004 (environmental) and
* Safety and Health 18001:2007
* Working hand in hand with safety and ISO standards ensuring that the correct procedures are in place to prevent accidents and deliver a top quality product.
* Excellent management skills of planning.
* Expertise in implementing cost saving measures to achieve substantial reduction in terms of man days, project cost, raw materials.
* A keen strategist and planner with skills to enhance workshop productivity.
* An excellent communicator with good analyzing and problem solving skills.

Maintenance
* Planning and effective preventive maintenance schedules of various machines and instruments to increase machine time and working strictly towards time limits.
* Making sure equipment is being maintained.
* Reducing repair time thereby increasing productivity.
* Executing cost saving and work within the budget.
* Exposure to the maintenance of hydraulics and pneumatics.

Management
* My management skills have made myself and my team grows into a strong business, working safely and efficiently.
* An excellent communicator with good analyzing and problem solving skills.
* Assuring that staff understands the risks involved while working with machines and in refineries and know what action to take in case of incidents.
* Involved in training people to improve there knowledge and increase production.
* Compiling weekly and monthly reports.
* Promote cost saving within the team (reduce consumable costs etc.).
* Carrying out appraisals & performance reviews and providing feedback to the team.

Quality Control/Assurance
* I am involved in QC where we got a team that goes out checking and making sure that the quality of our work is of high standard.
* Ensure adherence to quality standards and maintaining all related documents.
* Identify areas of quality failures and take steps to rectify the system.
* Practicing quality standards with key emphasis on improving quality.
* And providing a service to our clients that walk hand in hand with safety.

EDUCATION & TRAINING

1988 Hugenote High School Grade 12

1995 Department of Labour Trade Test / Fitter & Turner
Manpower Training no. S95/282

2003 School of Welding Competent persons pressure
Technology. Vessel inspection

2007 School of Welding Welding/Fabrication Inspector Level1
Technology. Magnetic Particle Testing Level 1 and 2
Penetrant Testing Level 1 and 2

Safety Training
* Combined Offshore Survival & Firefighting.
* Under water Escape Training.
* First Aid Training.
* NOSA Health & Safety Representative Training.
* Hazardous Materials Training.
* Breathing apparatus Training and confined space.
* Permit to work course.

Job related Training
* Carry Deck Crane – Capacity 8000 Kg, Code 43.
* Overhead Crane Pendant Control – Capacity 40000 Kg, Code 30.
* Reciprocating Compressor training Program. (Thompson)
* SKF 603 Bearing Maintenance and Service Certificate.
* Certificate in CNC Heidenhain Programming (Tshwane University of Technology).
* Mazak – Mazatrol course.
* Certificate in Tyco Valves & Controls / Pressure Relief Valve course.

Management and Supervision
* Certificate in basic management.
* Shutdown supervisory training course.

QC and inspection courses
* Welding/Fabrication Inspector Level 1
* Penetrant Testing Level 1 and II

* Magnetic Particle Testing Level 1 and II
* Starting Quality Engineering Diploma.

Computer skills
* SAP Training.
* Microsoft officeWord and Excel training.
* E-mail

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 1870)

Go to Search Parameters...

Brief Description

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

Eletro/Mechanical Technician, Applications Engineer

Pro Engineer 2+ years experience

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

I am Proficient in Process Modeling/Simulation and Oil & Gas Production Optimization using Nadal Analysis (SAM, PERFORM, PROSPER). I have experience in Oil Analysis, NDT corrosion inspection, and equipment condition monitoring.

Experienced Automation/Process Control Engineer

DRILLING FLUID ENGINEERING ( MUD ANALYSIS), SURVIVAL AT SEA AND HELICOPTER UNDERWATER ESCAPE TRAINING, M S SUITE

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

Geotechnical, Geological Exploration, Resevoir geologist

Im instrument Engineer ,experianced in controlling physical parameters(temp, press,flow) using microcontrollers,control aspects, designing new control systems,installation and maintainence

Organizational Development •Procurement & Purchasing Systems & Hardware • Operations Management •Business Development • System Analysis • MIS Administration • Inventory System Control • Team Management • Regional ICT Management • Regional MIS Management • Regional Database Management

Qualified Instruments Technician with a National Diploma and Certificate of Apprenticeship

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Project Control (Cost & Planning) with +5 years of exp

I have well rounded gold and base metal exploration skills with plenty of exposure to modern methods. I've worked in several supervisory roles and enjoy running a proactive team.

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Survey Technician/Mapper/Drafter

Seeking a position in Quality Control/Assurance Management where my extensive background, abilities and expertise will be used efficiently.

Instrument Technician with Overseas Russian Experience.

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Environmental Consultant (Engineer/Scientist)/Geoscientist

Profoundly talented and skillful UT/welding Inspector with over ten years experience in field of Quality control and inspection of light and heavy fabrication for refinery, oil and gas transmission line and onshore/offshore steel structure.

Bachelor Engineering of Mineral Resources

Coiled Tubing, Stimulation, CTD, Cathodic Protection, Telecomunication

Graduate Geologist with over one years work experience in both mining and exploration in Western Australia on gold and iron ore projects. Strong technical knowledge, attention to detail, can be relied on to work independently, and I work well with others. Flexible to travel.

I am a professionally qualified Process Engineer with experience of process and product development, as well as quality control at Energy and Telecommunication Industries. I am accomplished to multinational environment, related to process modeling, project leadership, quality control and auditing.

Chemical Engineering, Control System engineer. Pipeline operation. Catalyst

HEAVY EQUIPMENT OPERATOR

Livelink Administrator, Causeway Collboration Administrator

I completed my Bachelor of Science in Agricultural Economics and Agribusiness in the year 2001 and have completed the MBA programme majored in International Business in August 2008.

Surveyor and navigator (I love trouble shooting)

Good in warehouse/steel company settings. Good use of math and industrial tools. Can be self starter.

I'm a 33 year old African (Tanzanian) male, a holder of Bachelor of science (chemistry/Botany) degree. I've over the years accumulatedgreat analytical and technical skills, excellent communication and interpersonal skills, a team player and a very fast learner able to cope and fit in fast.

Catia, Solid Works, Solid Edge, Pro/ENGINEER, Adobe, Microsoft Office ( PowerPoint, Access, Project ), Photoshop, Blue Prints, Design, Product Development, Plant Layout Strategy, Six Sigma, Lean Manufacturing, 5S, , Injection Mold Press, Class A/CDL license, Lathe, Forklift, Donkey-lift, Milling

Instrumentation Technician and Mechanical Engineering Technician. Strengths in DCS, PLC's vibration monitoring equipment and thermography

I am conversant with offshore rig operations,such as;logging while drilling,measuring while drilling, mudlogging,formation evaluation.I got this skills at chevron,during a nine months intership.

Bilingual Electronic Engineer with some experience in pattern recognition and ultrasonic sensors, seeking an entry level position. Background in networks and telecommunication systems theory. Experience in Analog and digital circuit simulation, Visual Basic and C language programming.

i am having 13 years of experience in condition monitoring and in plant inspection includes vibration, vibration analysis, balancing, ndt, coating & corrosion and welding inspection.

Electrical Engineer

Qualifications: Diploma of Engineering, Engineering Tradesperson Mechanical (Trade Papers)

Over six years experience as a professional geologist with training in petroleum geology, mining geology and geochemistry

Mining Engineer with Business Administration experience in one of the world's largest cement company

With 20yrs of my experience, I have developed a sound background in infrastructure civil project and management, methods and procedures, which includes Commercial & Residential buildings, Roads, bridges, Tunneling, Dams, Environmental Remediation and Extensive Construction Quality Assurance/Quality

Young Mining Engineer (short experience in geophysics - jr Observer, HSE Officer, and coal mines - trainee)

I'm a P.Geo with a B.Sc. Hons in Geological Sciences and 5 years experience (dominantly exploration), varying from core logging to project planning. I set high standards for myself and I work extremely hard to complete anything I set out to do. I'm organized and I pride myself on perfection.

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

To secure a full time Mechanical Engineering position in which I will utilize my technical and interpersonal skills to further the company and myself.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out