Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #77277 next resume »»
CONTACT INFORMATION:
View contact information...

Health Physicist
Radiation Safety Officer
Environmental Manager

Education, Certifications, Registrations
M of Engineering, Engineering Management, 2007
MS, Materials Science, 2000
MS, Environmental Science and Engineering, 1994
BS, Biology, 1976
Certified Health Physicist, 1994, 3218, Active, Nationwide, 12/2006 through 12/2010
Overview of Applicable Training
Earned Value Management-24-hr., 2008,
40-hour HAZWOPER, 2008
First Aid, AED, CPR, 2008
ABHP Preparation and Exam, 1994
Internal Dosimetry, 1993
Applied Health Physics, ORAU/DOE/USNRC (5 wk. class), 1984
Radioactive Materials Licensing, 1983
Radiological Emergency Response Operations (RERO), 1982
MILDOS Modeling, 1981
Radiological Accident Assessment, 1981

Experience Summary
Mr. Brown has more than 25 years of experience as a health physicist, with specialized experience in quality assurance and quality improvement techniques, licensing, environmental safety, environmental engineering, waste management, integrated safety analysis, nuclear safety analysis in an NRC environment, hazard analysis, accident analysis including dispersion modeling for excursions and normal operations, as well as compliance and enforcement programs. This experience involved addressing Atomic Energy Act, Clean Air Act, Clean Water Act, Toxic Substances Control Act, Food and Drug Administration, and Occupational Safety and Health Administration Regulations, CERCLA, RCRA, and Department of Transportation issues. He has implemented a wide range of national and international industry standards and codes.

Mr. Brown has supported remediation projects in all of the EPA regions, and has worked with DoD, DOE, NRC, and commercial clients. Mr. Brown has worked on a number of process improvement and quality assurance teams in environmental and industrial programs leading either cost savings or revenue capture over $11 million.

Mr. Brown has been listed as Radiation Safety Officer on four radioactive materials licenses including Consulting, D&D, and specific licensing experience involving source, special, and byproduct material. This experience included extensive interaction with NRC and Agreement State regulators processing submittals, license applications, amendments, obtaining reciprocity, license termination, and release of properties for unrestricted use. Mr. Brown's experience includes all four NRC regions and headquarters, as well as activities in 13 states and one US territory. Mr. Brown has also been involved with establishing clean-up levels by identifying ARARs and developed DCGLs for remediation and decommissioning projects. Mr. Brown has extensive knowledge and skill in performing accountability and mass balance for processing materials.

Relevant Experience
Technical Manager, Health Physicist, multiple sites, Commercial Clients, Lakewood, CO (06-08-present)
Prepared FSS Reports, Sections of Preliminary Remedial Action Reports, and sections of commercial proposals. Prepared a chapter for submittal for a Part 70 licensing action, decommissioning plan, and worked with licensing personnel on coordinating language between decommissioning plan and RAI submittals.

Site Radiation Safety Officer, Shattuck Chemical Superfund Site, USACE, CR, Denver, CO (08/04 – 10/06). Responsible authority on radioactive materials licenses. Reviewed and prepared monthly analytical reports. Prepared Final Status Survey (FSS) reports for SU003-27, releasing the units as well as the site for unrestricted use. Technical reviewer and author/contributor for 12 operational procedures (site-specific Radiation Work Instructions for the conduct of work commensurate with the level of hazards present) and reviewer of the Radiation Protection Plan, Site Specific Health and Safety Plan. Created implementation materials for an amended radioactive materials license, and created internal audit components to initiate and maintain compliance for a Radioactive Materials License Compliance program. Built spreadsheet QA/QC chart tools to validate/document daily instrument performance checks. Mr. Brown prepared over 10 submittals to either the NRC or an agreement state. Concurrent with and immediately following this project support, Mr. Brown has also supported projects from coast to coast and beyond, including Guam and the Kingdom of Saudi Arabia, a commercial retail client from coast to coast, and been involved in business development throughout North America.

Project Professional IX, Earth Tech Inc., multiple sites, AFCEE & DOE, CR, San Antonio, Texas (04/03 – 05/04). Prepared FSS reports for DOE (LANL) and DoD (Kelly AFB) facilities contaminated by NORM and tritium, developed QA and program plans to conform to 10 CFR 830, 10 CFR 835, and DOE Orders 414.1A, & 450.4-6 (ISMS). Radiation Safety Officer at a Superfund clean-up site contaminated with radioactive materials (radium, thorium, and cesium), lead, and PCB, in Fairbanks, AK. Prepared control charts for radiation detection instruments calibration/ performance checks. Prepared draft report summarizing work at the Arctic Salvage Yard Superfund Site. Mr. Brown served as RSO for a building demolition (D&D) project at Savannah River Site (SRS) (building 320(M)). Mr. Brown prepared facility maintenance and D&D plan for a private concern in Columbia, SC.

Health Physicist 2, Safety and Ecology, Inc., DOE for Bechtel Jacobs, CR, Piketon, Ohio (08/02 - 04/03). Managed RWP activities, waste management, involved in internal audit processes, investigated air sample results, Multi-Agency Radiation Site Survey Investigation Manual (MARSSIM)/free release criteria implementation, and conducted ISMS training. Reported on special dose assessments for radiological occurrence reports, performed statistical analyses, and prepared presentations of environmental statistics information to drive cost savings initiatives, in excess of $100,000.

Metrology/Yield Engineer, Intel Corporation, Direct, Rio Rancho, NM (06/00 - 07/02). Performed advanced quality improvement and process control change analyses for an inspection tool-set supporting multiple technologies and processes throughout the local fab and the virtual factory. Managed over 1200 control charts weekly, and maintained over a hundred tools on the local factory floor. Performed intensive troubleshooting and supported multiple introductions of new technologies to the factory.

Senior Scientist, Versar, Incorporated, AFCEE, CR, Northglenn, Colorado (11/96-07/97). Mr. Brown developed project work plan, training plan and materials, and strategic plan to review Air Force Radioactive Materials License documentation, verifying the adequacy of radioactive materials license termination procedures/documentation prior to property transfer. Designed a survey strategy using the draft MARSSIM, a joint release by DOE, NRC, EPA, DoD, and other NRC guidance, to conduct a radiological characterization to decommission 11 buildings using statistically defensible sampling methods, supporting decision process for a Finding of Suitability for Transfer (FOST). Used Internet search engines to identify regulations, standards, plans, specifications, and obtain guidance to economically obtain hardware and documents. Selected methods and instruments, developing procedures, training and supervising staff, using DOD, DOE, and NRC guidance, including NUREG-5849, and Multi-Agency Radiological Site Survey Investigation Manual (MARSSIM) approved by DOE, DOE, USEPA, and NRC), providing industrial hygiene, health physics, and industrial safety expertise to work plan tasks development. Mr. Brown examined groundwater interactions of trace quantities of halogenated solvent contamination involving TCE and PCE and thee installation of a reactive wall groundwater barrier.

Prior experience (4/81-9/96). Colorado Department of Public Health and Environment (4/81 - 9/89). From 1981 through 1989, Mr. Brown was a project manager for licensing actions including processing applications and submittals for new licenses and amending existing licenses. Chief among these duties was Source Material milling (i.e., Uranium Milling) licensing, inspection and enforcement, environmental health and safety at manufacturing and chemical processing facilities, as well as a complete initiation to project completion perspective on CERCLA and RCRA response actions.

Other Mountain West (9/89 - 9/96). Mr. Brown was involved in high-level SNM and byproduct material management involving over a dozen submittals at INEL and prepared dozens of procedures for managing and accounting SNM at Rocky Flats Environmental Technology Site, as well as developing contingency plans for managing incidents involving SNM.

Computer and software experience: Mr. Brown has used a full complement of Microsoft Office suite software for problem solving, presentation and analysis. Facility with specialty software and codes includes: Microshield, Varskin, the ResRad family of codes (ResRad6.3 & 6.4, ResRad-Build 3.3 & 3.4, ResRad-Biota, ResRad-Offsite, ResRad Recycle 3.10); MILDOS, RadDecay, Radon-Flux, Airdose, ValleyModel, Cap-88-PC, Code for INternal DosimetrY (CINDY), CrystalBall, Statgraphics, NCSS, JMP, & JUMPN, MINITAB, MVPStats, and SPSS for windows, MathCad and Mathematica.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 701 to 750 of 1852)Go to Search Parameters...
Brief Description
Metallurgist and Materials engineer with 3 years of experience. Wide range of skills in metallography techniques, SEM, TEM, Stastical tools and design softwares. Good communication and presentation skills. Published papers in journals and presented work at conferences.
I seek a position that will give me an opportunity to develop project strategies that enhance efficiency through the implementation of cutting-edge technologies, efficient application designs and intelligent reporting practices.
professional seeking new challenges.
Superintentant sand and gravel mining, from start to reclamation./ Clean construction debris and recyling site experiience.
Quality assurance, reserch and development. Section - Process control in charge, shift in charge
Young geologist looking for Interesting Career
Sr Structural Designer / PDS FrameWorks Coordinator and project set up.
Masters Degree in Mining Engineering and Mineral Processing; +3 yrs work experience as Research Scientist within Global Engeering Services of International Industrial Minerals Company; fluent in English and German language
Accomplished, Achievement-driven, Results Oriented and Passionate about realizing a challenging career that allows meaningful contribution to Metal/Manufacturing Industry .Had 3 years of primary aluminum production industry experience and recently graduated in material science and engineering
Piping Design & Stress Engineer, Caesar II, Rohr II, PDMS, Auto Pipe
Radiation Safety Officer, Certified Health Physicist, Environmental Manager
PROFILE: A self-motivated and hard working Geologist with experience in Mining and Exploration of gems, precious metal and industrial metals. A capable leader, able to use own initiative and work as part of a team.
Smart, skilled and experienced, electrical/ mechanical available for camp/ remote locations ( extreme camping)
Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries
Young academically accomplished geotechnical engineer, practical experience in the mining industry both domestic and overseas.
Knowledge of Hydrotreating & Hydrocracking, Catalytic Cracking, Distillation and Amine plants. Knowledge of Process simulation (HYSYS, ASPEN Plus, PRO II and HTRI), PFD, P&ID, Flare and Relief systems, LDT, Hydraulic calculation, HAZOP review, Equipment sizing, TBE, DPDT and process data sheet
Entry level geologist
Bachelor degree of computer science and Seeking a challenging position, where my technical and communicational skills can be utilized and developed in field of software or quality assurance
Career Objective
Entry Level Mining Engineer
Mining Engineer Seeking employment in the mining industry that will allow career growth and the opportunity for advancement.
Geological Engineer, mapping, petrography, reserve estimates, exploration, mining, import/export, well drilling, GPS, logging, geoframe, geographix, excellent vocational English, MS Office, MBA in Business Administration, Experience in Marketing
Masters student in Materials Science and Engineering with BS in Applied Physics seeking engineering related position after graduation in Spring 2002.
FIELD OF SPECIALISATION (a) Design of method of extraction of pillars and their stability. (b) Design of support system for coal mines. (c) Multiple-seam coal mining. (d) Strata behaviour in Blasting Gallery method. (e) Design of supports and strata behaviour in Hydel Power Projects.
Process Engineer Graduated with a First Class from the University of Leeds 3-4 years experience of production, technical, commissioning and project management
Engineer with practical business, design and management experience in the areas of Civil and Geotechnical Engineering. Educated professional, committed to continuous improvement, ethics, teamwork and quality service. Detail oriented, excellent communicator, and capable of managing multiple projects
Mineral Processing Engineer(16 yrs exp.)10 yrs as mill sup't in Cu,Zn,Au,Ag operations. Personnal traits: team leader, flexible, resourceful, team-oriented, good communicator. Skills: technical & managerial aspects of planning, operation, projects, budget, processes, training, HSE
To obtain Position in Project Management or Project Engineering in an International Environment
PROJECT GEOLOGIST with 19 years experience in Environmental Consulting including soil and groundwater investigations and site remediation, and Oil and Gas Exploration.
I am a self motivated and ambitious Tanzanian holding a Bachelar of Science Degree in mining engineering who can work under pressure. I have got the basic skills in computer and user of Vulcan software.
To be a part of organization which enables me to cope-up with emerging as well as the latest trends and provide me scope for widening the spectrum of my knowledge.
LSIT, US Citizen, Willing to relocate
A highly qualified Materials Engineering Graduate, with extensive technical, inter-personal, analytical, and troubleshooting skills, seeks a challenging and exciting engineering position
A mining engg from indian school of mines, currently I am working in NMDC an iron ore company, I am in charge of operation and safety aspects in the comapny,
Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)
I headed the Paloncha coal project and Jangareddygudem coal projects as Project Manager and monitored the Exploration activities of the projects and successfully and achieved the stipulated targets (Oct 2006 to 10th July 2008)
I am a Materials and Process Metallurgist,, and a Plant Metallurgist ,who have seven years experience in both gold and materials processing in Ghana.
SAP, AutoCAD, Pro-E, ANSYS, ARENA, FMEA, DOE, Kaizen, Kanban, 5S, Six Sigma, MS-Office
Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;
One year and nine months of domestic mining experience, in a open cut, shovel/truck coal operation. Experience include, long term planning, road design, dump design, Pit design, scheduling, cost estimate, pit production supervisor of Shovel P&H and O&K fleet.
Mining Engineer, Programmer, Mineral Project Evaluation, CTL and GTL Technologies
I like new challenge and gain valuable new experience to develop my skill become a potential engineer. I am very familiar to operates computer and applies field equipments. I am a hard working person and be able to work under pressure as a team or individual, a dynamic, self-motivated, have
Structural Design, Stress Analysis, FE Analysis (Nastran / Patran, ANSYS 11.0) and Hand Calculations in MathCAD (Ref: Roark’s, API, ASME B31.3 and DNV)
Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.
Graduated Professional Chemical Engineer I have many years project engineering experience and this in a number of positions and countries.
Having experienced more than 23 years at various E & I projects consist of: Construction, Pre commissioning and commissioning
Over 25 years of progressive mining industry experience with significant achievements in management of mine development, engineering and operations. Proven track record of delivering results and affecting change.
Surface 04 card, Equipment operator, Electrician, Control room, Foreman
Offshore Geological Specialist
20+ years of international experience in the study, process design, engg., procurement & project management & operations. Having led multifunctional teams for EPCM for hydrometallurgical( Leaching, SX-EW), benificaition & pyro( Smelter & Electro refining) for copper, Cobalt, zinc and lead metals.
1   2   3   4   5   6   7   8   9   10   11   12   13   14   [ 15 ]   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37  
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com