Resume - Fifteen years experience in the oil and gas industry. Five years overseas work e...

Misco Jobs

Resume #77987

CONTACT INFORMATION:
View contact information...

Work Experience
Senior Mechanical Engineer AMEC Berca Indonesia, Jakarta, Indonesia 2007 to present
AMEC Berca Indonesia is a joint venture between the UK based international engineering company AMEC, and Indonesia's CCM group. The project I am currently involved with is engineering support for the construction of two offshore drilling platforms deployed off the eastern coast of Russia. The client is Sakhalin Energy and Investment Company (SEIC) a consortium involving Royal Dutch Shell and Russia's Gazprom.
* Troubleshooting and re-design of diesel fuel system for power turbines including pumps, heater and filtration system.
* Analysis of vibration problem with large API 610 firewater pumps.
* Installation of API 674 high pressure positive displacement pumps.
* Troubleshooting of a glycol heating system used for waste heat recovery and space heating.
* Gained familiarity with HVAC system design for offshore platforms.
* Use of HYSYS for hydraulic calculations and basic process simulation.
* Experience with various other equipment, including turbine power generators, diesel engine power generators, diaphragm pumps, pipe penetration fire seals, hoists, winches, padeyes, Stabmaster.

Mechanical Design Engineer Waha Oil Company, Tripoli, Libya 2003 to 2007
Waha Oil Company is jointly owned and managed by Conoco-Phillips, Amerada Hess, Marathon Petroleum and the National Oil Company of Libya. This position primarily involved design and management of oilfield facility upgrade projects.
* Installation of API 610 vertical and horizontal centrifugal pumps, rotary displacement meters, meter prover.
* Replacement of fuel gas supply systems for power turbines at two sites. Project involved the replacement of fired heaters, filter/separators, knock-out drums and interconnecting piping and control valves.
* Installation of fire detection and extinguishing system for crude oil storage tanks.
* Installation of fiberglass produced water piping system.
* Design duties included performing basic process modeling such as hydraulic calculations, working with drafting co-workers in the preparation of process schematics and arrangement drawings, reviewing vendor design drawings to ensure compliance with design standards.
* Project management duties included budget preparation, tracking project labor and material costs, coordinating with construction personnel, overseeing commissioning of equipment.
* Gained familiarity with API 610 for centrifugal pumps and API 682 for mechanical seals.
* Gained experience using HYSYS for process modeling.
* Provided mechanical engineering support to civil engineering projects such as evaluating and selecting ventilation and air conditioning equipment for installation in new buildings.

Mech. Design/Appl. Engineer Weatherford Global Compression, Calgary, Canada 1994 to 2001
Weatherford Global Compression (now Exterran) is a packager of reciprocating natural gas compressors, approximately 100hp to 6000hp in size. I had two positions at this company first in the applications department, preparing quotations for compressor projects, then in the engineering department in a design and technical support role with some project management duties.

Mechanical Design Engineering Position:
* Performed design and analysis of natural gas process and utility fluid systems for natural gas compressors.
* Selected components for process gas and utility fluid systems, such as manual valves, control valves, pumps, heat exchangers, transmitters, RTD's, thermocouples, switches and gauges.
* Designed structural and rotating systems for natural gas compressors.
* Designed pressure vessels and pressure piping to ASME codes.
* Researched rectangular flange design for pressure vessels and wrote a spreadsheet to perform the design calculations, saving the continued expense of hiring consulting firms to perform the calculations.
* Developed a procedure to design nozzles for pressure vessels, which standardized and improved the efficiency of the designs.
* Provided design concepts and calculations for development of standard intake and exhaust systems.
* Performed troubleshooting of operational problems with existing equipment.

Applications Engineer Position:
* Sized and selected major equipment to be offered in quotations on compression projects.
* Reviewed and commented on customer specifications (sometimes quite lengthy).
* Prepared design specifications for sub-equipment and solicited quotations from suppliers.

Engineer In Training Pillar Oilfield Projects Ltd., Calgary, Canada 1993
Worked at two oilfield construction sites in northern Alberta.
* Gained knowledge of field fabrication practices of piping systems, primarily welding.
* Observed types and usage of heavy equipment used in field construction projects.
* Gained knowledge of the types and usage of handheld tools.

Education
B.Sc. Mechanical Engineering University of Calgary, Calgary, Canada Graduated in 1993
* Overall GPA of 3.29 (4.00). Dean's List. Approximate class standing was fourth out of 70 students.
* Awarded Pearson Memorial Bursary and Trans-Alta Bursary for outstanding academic achievement.
* Completed two graduate level natural gas processing courses that included instruction on using HYSYS process simulation software.
* Completed an undergraduate course on Finite Element Analysis in the winter of 2003. This course included two projects using ANSYS version 6.

Professional Registrations and Memberships
* Registered with the Alberta Professional Engineers Geologists and Geophysicists Association (APEGGA).
* Member of the American Society of Mechanical Engineers (ASME). On the Board of Directors of the Southern Alberta Section of the ASME in 2002-03.

Career Interests, Hobbies, Miscellaneous
* Citizenship in three countries: Canada, USA and Ireland.
* Other areas of interest within the field of mechanical engineering include alternative energy systems, design for energy efficiency, fuel cells and hydrogen energy, control systems, mechatronics.
* Member of the board of directors of the condo building where I reside.
* Mechanical aptitude. Examples include hands-on projects requiring the use of basic hand tools such as performing auto repairs, the most complex being a transmission re-build.
* I very much enjoy traveling to and working overseas. The countries I have traveled to so far, starting with the most recent, are: Japan, China, Singapore, Indonesia, France, Spain, Russia, Egypt, Switzerland, Czech Republic, UK, Austria, Italy, Germany, Libya, Malta, Guatemala, Mexico, USA.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1850)

Go to Search Parameters...

Brief Description

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

I am Mine Surveyor with more than five years experience in the Zimbabwean mining industry. I established survey offices at Sino-Zimbabwe Cement Company and Murowa Diamonds being the first permanent employed surveyor at the Mines. I have experience in Surpac, AutoCad and Vulcan mining softwares.

Previously employed to Rusal (Guyana) as a Planning Manager

Production with safety

Mine Planning Superintendent

I am a results oriented Mining Engineer with nine years of mining in Africa. I am currently residing in USA and do have a valid work permit to work for any employer. I hold a Mining Engineering Degree and I graduated from college in 1993. I have risen through the ranks to become Production Manager.

Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax process simulation, Gas Dehydration, Water Treatment (both produced water and seawater injection), hydrocyclone, flotation and filtration technologies. Comfortable from the Pre-FEED level down to the nuts & bolts.

Being an AutoCAD Drafter/Technician, I have had tremendous experience (10 years) in the Building Construction as well as Mining industries.

Professional Mining Engineer (CEng MIMMM) searching for senior level position in a open pit mining project in FSU

Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey

Mechanical Designer using Catia -UG-Pro-E

B.Tech Mining Engg.

M.B.A. and Licensed Professional Mining Engineer with record of success in operations and engineering management. Creative problem solver with ability to develop real economic profits, lead during change management and create business strategies.

Graduate Mining Engineer that speaks Spanish, English, German and French willing to work in the mining industry.

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

Geophysicist

Junior Mine-Geotechnical Engineer, Rock Mechanics & Application, Explosives & Blasting, Numerical Analysis relate to Mine/Geotechnical project

Materials/Ceramic/Metallurgical Engineer/Materials Scientist; Skills: Materials Characterization, Metallography, Microfabrication, Ceramics, Titanium & Titanium dioxide, Superalloys, Mechanical Testing; Qualifications: MS and BS in Materials Science Engineering

To obtain employment in a mining environment so that my past skills and work experience as a Geological Tech can further grow and be challenged.

Computer ?Automation & Controls Engineer

To secure a position within a company with longevity and growth potential, while enabling me to utilize my practical skills and experience

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

Bilingual Mechanical Engineer with 22 years experience in planning, management and maintenance.

Highly motivated, graduating June 2003 from a Mineral Processing Engineering program, University of Toronto, worked in the Nickel and copper concentrator and semelter, familiar with diamond processing, proficient in Microsoft PowerPoint, excel, word. Hard working, bilingual and willing to relocate.

I have mining experience as an engineer and as a miner, in both domestic and international environments. I hope to establish roots writing a mining company starting with a junior engineer's positions.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

A highly experienced and motivated mine surveyor. Specified mine surveying and mine modeling.

Finishing my MS degree in Geology and looking for a career. I am willing to travel and/or relocate. I am able to work in the US, Europe, and Canada, although I could move anywhere.

Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D

Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

I am open pit mining technician with experience in drill and blast, load and haul and pit services. I have worked for both precious metal (gold) and base metal operation(chrome) in senior positions.

Operations manager with 30 years experience in the mining industry.

Project Manager / Engineer, Private & Public Sector Experienced

Free! I am a production geologist with over 15 years experience across a wide range of commodities including base metals, copper and gold in both open cut and underground environments.

Having a long-lasting interest in mineralogy, I am willing to find a job that will allow me to use and expand my knowledge and analytical skills in the field of mineral exploration.

Graduate Research Assistant, University of Nevada, Reno (Jan 2004-present)

I am Mining Engineer specialised in Driilling & Blasting

Drilling engineer - diamond core drilling

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

To carve a niche for myself in the organization I work for, and prove my abilities, in terms of strong work ethics, to give an advantage to the organization and as extra edge to my career.

I am a professionally registered mining engineer with 13 years experience in the mining industry. My strengths are leading miners and engineers, developing and executing mining and construction plans, excellent presentation skills, and the ability to make decisions under pressure.

Designer,Planner,Production/Engineering mainternance personeel,Commercial Engineer

Certificate III and IV Mining Exploration/Geoscience + 2 years experience

Worked in all phases of the industrial plants. In commisioning, start up and debotlenecking. As a process engineer, with experiencie in process, production, facilities and process control systems. Supervised group of 12 people, implement ISO 9000/1400, Osha 18000, economic evaluations and management

Have a progressive and responsible working experience of eight (8) years dedicated in field of piping engineering, design and drafting. Directly involved in a variety of oil & gas, petrochemical, refinery, and mining projects which starts from Estimation, Front End Engineering Design (FEED),

Licensed Mining Engineer

Time served apprentice trained mechanical fitter, with experience of large fixed plant in quarries, factories, foundries and cement plants

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out