Resume - Skills in 2D/3D modelling of Piping / Mechanical works using Autoplant Bentley 2...

Misco Jobs

Resume #77996

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE

To pursue career in a challenging and growth oriented technical environment to broaden my scope of expertise by gaining experience and improving my knowledge and skills.

EDUCATION

Mapua Institute of Technology, Intramuros Manila
Bachelor of Science in Mechanical Engineering, July 2005
Board Passer – April 2006 Mechanical Engineering Licensure Examination

PROFESSIONAL EXPERIENCE

* October 22, 2007 – Present

AUSENCO ASIA PTY. LTD.
3rd Floor Rufino Building Ayala Ave. cor V.A. Rufino St.,
Makati City, Philippines

Position: Piping / Mechanical Design Drafter
Mechanical / Piping Engineer (on training)

Projects Involved: Didipio Gold -Copper Project
Carborough Downs CHPP Project (Shop Detailing)
North Mara Gold Project

Duties and Responsibilities:

* Prepare engineering drawings in the Mechanical and Piping disciplines, using Bentley AutoPLANT software, including both 2D and 3D modeling.

* Prepare drafting of Piping and Instrumentation Diagram and Process Flow diagram.

* Undertake material take-off from drawings and prepare schedule of materials.

* Report on status of work being undertaken and provide estimates of time to complete the allocated work.

* Generation of the 3d plant model arrangement using Bentley piping work area setup for clash checking and other concerns.

* Clash checking of 3d mechanical and piping models using Bentley Explorer.

* Carry-out checking of drawings and schedules from other Engineers and Drafters to ensure correctness, proper coordination, and compliance with relevant standards.

* May 16, 2007 – October 16, 2007

VENTECH INTERNATIONAL SERVICES PHILIPPINES, INC.
23rd Floor Insular Life Corporate Centre, Insular Drive, Filinvest Corporate City, Alabang, Muntinlupa City, Philippines

Position: Piping Designer 1
Project Involved: Caltex Batangas Refinery Dismantling

Duties and Responsibilities:

* Site inspection and squad checking
* P&ID walkthrough and Isometric match marking
* Coordinating with a team for Caltex Dismantling
* Piping Material Take-Off and Piping Continuity checking
* Pipe spooling
* Isometric scrubbing using Autodesk Raster Design
* Detailing of P&ID and Isometrics using Autodesk Autocad 2004

* August 1, 2006 – May 15, 2007

MITSUBISHI HEAVY INDUSTRIES – TECHNICAL SERVICES CORPORATION
25TH Floor BPI Buendia Center, Sen. Gil Puyat Ave., Makati City

Position: Mechanical Design Engineer (Engineer 1)
Projects Involved: China Wuhu Power Plant Project, Vietnam Omon Power Plant Project,
Mexico Pacifico Power Plant Project

Duties and Responsibilities:

* Preparation of fabrication detail drawings of power boiler's pressure and non-pressure components such as air and gas duct system, economizer hopper and boiler buckstay.

* Provides material bill of quantity and specifications for cost estimation.

* Revise drawings by optimum utilization of AutoCAD 2005 as per other design section comments and equipment manufacturer comments.

* Coordination and correspondence with MHI – Nagasaki, Japan counterparts concerning design progress, any design and technical changes.

TECHNICAL SKILLS

* Proficient in Autodesk AutoCAD 2006 2D & 3D
* Knowledge in Autodesk Inventor 2008
* Knowledge in AutoPLANT 3D Bentley Mechanical, Piping and Structural
* Knowledge in Bentley Explorer 2004
* Knowledge in Autodesk Raster Design 2007
* Knowledge of Microsoft office, the Internet and all associated applications.
* Knowledge in computer hardware and software troubleshooting

TRAININGS AND SEMINARS ATTENDED

* Autodesk Inventor 2008 Training - Aug. 30, 2008 – Oct. 4, 2008
MicroCADD Technologies Co., Inc. Cubao Quezon City

* Bentley AutoPLANT 3D Mechanical / Piping Training - Nov. 19 – 21, 2007
Ausenco Asia Pty. Ltd

* Autodesk AutoCAD 2006 with Color Rendering – Level 1 & 2 - Aug. 22 – Sept. 6, 2005
MicroCADD Technologies Co., Inc. SM Manila

* Energy Technology Conference – Transport Forum - Oct. 19, 2004
EDSA Shangri-La Hotel

* Fire Protection - Aug. 6, 2004
Mapua Institute of Tehcnology Intramuros, Manila

CHARACTER REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 1871)

Go to Search Parameters...

Brief Description

Strong in mechanical,electrical and plumbing.mobile or fixed equipments or engines are my categories where I am efficient as a hard worker, innovative, result oriented

B.Sc Honours Mining Engineering

BSc Hohours Degree in Mining Engineering, Now working as Planning Manager for an Open Pit operation. Very good in Planning , using Surpac Mining software.

My experience in construction 6 years with contactor company.

Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt of Multidisciplinary Projects, Numerical Modeling, Rock Mechanics, Ground Support Design, Tunnel Inspections, Hands-on Experience in Applying FLAC, FLAC3d, UDEC and 3DEC Codes in Design, Work Under NQA-1 Q A Program

Experienced, long and short range, production planner for open cut gold and copper mines in California and Arizona. Skilled professional with supervisory experience. Twelve years MEDSystem experience. Team player with excellent communication skills and perfect safety record.

Recent geological engineering graduate (EIT). Cooperative education background includes various forms of exploration, open-pit and underground mining experience, construction supervision and inspection, monitoring programs, and general geological, environmental, and civil engineering practices.

To obtain a position as an Engineer within a company where my experience and education will provide the opportunity for further growth.

Field and Exploration Geologist in Opencast mines on Beach Placer Deposit.

I have a keen interest in science and its application towards solving problems. I am a creative individual who takes initiative when the situation calls for it. I am very determined and believe in completing what I start, from the planning phase, to the design phase and ultimately the implementation

I am a young professional with BSc Geological Sciences degree, working for exploration company in the position of GIS Intern. I'm self motivated and always in the position to be taught and I'm very fast to understand the need and applications that may be required by any employer.

Geophysicist, Information technology & Communication, Network Engineer, System Administrator, Hardware & Software developer

PhD and MD in Mining Engineering, Environmental Pollution due Mining Activity, Assesment Impact of the Mining Industry on the Environment

Electrical engineering (HC) Diploma; Electrical Power Engineering B-TECH; N4 Electrical engineering; computer skills; decision making; communication skills; problem solving skills; report writing skills; Motivation skills; Interpersonal skills; project management skills; technical skills

Work well in a team environment Sound judgement, strong quantitative and analytical skills Highly detail orientated and organised Well-developed written and oral communication skills

draughting

1.B.E. in mining engineer

I'm a metallurgical engineer seeking for a challenging position in the mining industry to further enhance skills and analytical abilities while at the same time giving value to the company of which I am working with

I was a Commissioning Engineer at the Rio Tinto Cape Lambert 80 MTPA Port Upgrade in 2008. In 2007 I was the Electrical Engineer responsible for the decommissioning of the original inloading and outloading circuit at the Dampier Port Upgrade Phase B. I excel in a team environment and have a very goo

Skills in 2D/3D modelling of Piping / Mechanical works using Autoplant Bentley 2004 & Autocad 2006

Dual Post Graduate with Mechanical + Management with 8 years of Industry Experience is looking for fresh chanllenges.

11 years experience in various projects includes design, costing, construction and control. Project support experienced working in fast-paced environmental demand strong organization, technical and interpersonal skills

Metallurgist with heat treatment and quality control exp. as a technican.

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

Geological Mapping - surface and underground. GIS, 3D CAD/mine planning software, computer programming C, C++, Fortran. Rock Mass Stability - including mechanical and geophysical properties. Technical and business writing, public speaking, and teaching skills. Knowledge of seismic risk assessment.

Competent Mechanical Engineer currently working with ACC Ltd. HOLCIM INDIA

4-years BSc. Mining Engineering, 1-year working experience in both Surface and Underground Mining Operations, basic knowlege in Surpac, Talpac, XPAC and Whittle mining softwares

I am applying as chemical engineer

Diploma in Land Surveying and have vast experience in engineering, cadastral, topographical and mine survey. I have experince using Leica instruments such as GPS System 1200 and TCR407, TC1610 total stations.Currently working as a contract surveyor at the Unki Mine Project (Anglo Platinum)

Sales & Marketing - Valve specialist

B.S. - Mining Engineering. 20+ years experience as a mining engineer and staff supervisor in open cut copper mining utilizing earth-moving, drilling, blasting, drainage maintenance, and dewatering equipment. Also have several years experience with open-cut coal mining. Willing to relocate.

Good experience in the operation of mining and quarry activities

Piping Designer PDS CAD

An enthusiastic and dedicated professional with extensive experience across all areas of land surveying with exception leadership skills who is able to develop and motivate others to achieve targets.

I am a qualified geological technician with 7 years mining experience both underground and on surface. I am hard working and can work independently in any condition.

Ten and half years of extensive experience in applying rotating equipments skill: the main responsibility includes EPC, estimate and procurement of equipment, technical bid evaluation, prepared purchase orders, approval of GA drawing, vendor documentation, commissioning, start-up, & trouble-shooting

Process control, flow sheet diagram, presentation, quality inspection, analysis (XRD, XRF, SEM, MALVERN)

Mine Geologist; Mapping; MineSight; MapInfo; Economic Geology; Leadership; Geostatistics; Underground; Exploration; Open Cut; Pit

I am a piping designer with 35 yrs of experience in a diverse background.

Surface Mine Engineer

Mechanical Engineer with 11 years experience. Skills on corrosion and production engineering. Corrosion engineering experience includes: chemical treatment, NDT and corrosion monitoring. Production engineering experience involves beam pumped, PCP and gas lift wells production optimization.

Electrical / Instrumentation Controls Designer with Intools, Autocad, & Microstation

Sr. E&I designer with over 20 years field engineering experience. US & Canadian citizen/

Registered Professional Engineer with more than six years of work experience in the areas of Field Engineering, and Construction Management.

Objective: positions utilizing my extensive knowledge and expertise in the field.

Please find herewith the enclosed resume of mine for the post of Mechanical engineer. As I have more than 10 years full experience in the field Heavy earth moving equipment.

Metallurgical engineer seeking an extractive metallurgy or mineral processing position. Interested in areas where the main objectives are process improvements and quality control. Analytical and inquisitive with a Midwest work ethic.

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

13MONTHS - SAFETY 7 YEARS - SHAFT 5 YEARS - DRIFTS 6 MONTHS - STOPES

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out