Resume - Research Thesis on ANTENNA/RF

Misco Jobs

Resume #78215

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To obtain a full time employment in the area of RF systems, Antenna design, CDMA, or any area that meets my abilities and gives me opportunities to sharpen my technical knowledge.

SKILLS
* Languages: C++, SQL, VHDL.
* Operating System: UNIX, MS Windows, MS Office.
* Simulation Software: Ansoft Designer v3.0, MATLAB, PCAAD 5.0, Modelsim, TINA Pro.
* Hands On: HFSS v10.0, CST, Anechoic Chamber.

WORK EXPERIENCE (3.5 years)
* Research Assistant, Electrical Department, San Diego State. (2 Years)
Academic Grader, Research on Instrumentation Circuits, Antennas.

* Assistant Teaching Tutor: C++ language, San Diego State. (6 months)

* Technical Support: Flextronics Software Solutions, India. (3 months)
Troubleshooting Technical Issues for US company i.e. HughesNet

* Technical Support: IBM Daksh, India (5 months)
Troubleshooting Technical Issues for US company Hewlett-Packard.

INTERNSHIPS
* Semiconductor Complex Limited, India.
Engineer Trainee ~ VHDL Implementation & Simulation (Design and Implementation of VLSI Chips in VHDL)
* Jupiter Radios TEXLA Television, India.
Engineer Trainee ~ Assembling and Testing Unit

EDUCATION
* M.S. in Electrical Engineering (San Diego State, CA) (Aug 2006-May2009)
* Bachelor of Engg. in Electronics & Telecommunication (Rajasthan University, India) (2001-2005)
Achievement: Academic Honors (73%)

RELEVANT COURSEWORK
Antennas & Wave Propagation, Advanced Topics in Antennas, Digital Communications, RF Wireless Systems Design, Coding Theory, Digital Signal Processing.

M.S. THESIS

Title
" Performance of Microstrip Patch Antennas and Arrays on Electromagnetic Bandgap Structures "

Skills Learned and Completed
* Antenna radiation pattern measurements using a simple setup.
* Network Analyzers for the scattering parameter measurements.
* Antenna Simulated: Microstrip Patch antennas with different feeding techniques.
* Used network analyzer for impedance measurement and used simple transmitter/ receiver setup for radiation pattern measurement.
* Ansoft Designer full wave analysis software for modeling and simulation of various types of planar antennas and microwave components.

Continued…

KEY ELECTRICAL PROJECTS

* PERFORMANCE ANALYSIS OF BLUETOOTH EDR WITH BLUETOOTH v1.1
Basic baseband block of Bluetooth v1.1 and Bluetooth v2.1 – EDR standards and comparison of their performance for various parameters like BER, signal to noise ratio, receiver complexity, power efficiency.

* DESIGNING OF FM MODULATOR/DEMODULATOR USING 14 STAGE POLYPHASE FILTER:-
Achieved using 14 Stage Polyphase filter. It involved the designing of Gaussian pulse to mitigate the effect of Inter Symbol Interference.

* FREQUENCY AND TIME SYNCRONIZATION IN OFDMA:-
Using short preamble in between OFDM symbols, we can achieve frequency and time synchronization and by using long preamble we can achieve channel equalization i.e mitigating the effect of channel distortion.

* BASEBAND BEHAVIOURAL MODEL FOR A BLUETOOTH SYSTEM BASED ON STANDARDS:-
A brief introduction of Bluetooth specifications is given and the background knowledge for implementation of this model on a behavioral level is also presented. In the model, synchronization in demodulation part has been focused on.

* ARITHMETIC AND LOGIC UNIT and UART
ALU can perform shifting including all other options like Addition, Subtraction, Multiplication, Division with the use of Registers.

* HEXAPOD ROBOT
It was based on control systems; a microcontroller programmed chip was used. (The Robot takes another path if any obstacle comes in front of it.)

REFERENCES (Please feel free to contact them)

1) Prof. Satish K. Sharma, San Diego State. Email: ssharma@mail.sdsu.edu 2) Prof. P. T. Kolen, San Diego State. Email: kolen@mail.sdsu.edu
3) Team Lead, Samrat SenGupta, Flextronics Ltd, India Email: sammy08@gmail.com

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 1870)

Go to Search Parameters...

Brief Description

General manager of Services Company / QHSE and Management systems Oil and Gas sectors

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

I rely on over 14-year experience in Instrumentation & Control Engineering in FEED & Detailed Design Engineering, Construction, Supervising, QA/QC, Commissioning, Testing and Maintenance of Oil & Gas (Offshore, Onshore), Refining, Petrochemical and other major projects.

30+ yrs experience in the Oil, Gas, and Construction industries (within Onshore, Offshore and Overseas and in Senior Management & Shop-floor positions upon a Contract), and fluency in French, Portuguese and Spanish.

I have four years of hands-on benchwork experience in chemistry labs in University of Houston as a research assistant.

Over six years experience working as an engineering and environmental geologist. Manage, coordinate and field supervise all drilling activities and field work for large scale geotechnical and environmental projects for government and industrial clients in the eastern United States and Africa.

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

My technical specialty lies in installation, troubleshooting and repairing Electrical, Mechanical, Automation production problems. I can install conduit, cable tray, main panels, and sub-panels, distribution transformers, ground systems and, wide variety electro-mechanical devices

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

I am a qualified artisan skilled in hydraulics and heavy duty equipment, currently working as a product specialist and studying towards a mechanical engineer diploma.

I have eight solid years of experience in various Production Operations positions in Shell Gabon. the positions that I have held required leadership skills, excellent team working spirit and good communication skills which I firmly believe to be most valuable attributes.

Geologist with Exploration Experience

NEBOSH Certified HSE advisor, HSE Trainer, Tech-IOSH member

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

Highly organized and innovative Manager with an exceptional track record of cost minimization through creative procurement approaches and proactive management style focused on building trust and improving departmental teamwork in fast paced union environments.

I'm over 5 years experience in multinational and overseas company. Have strength in knowledge and leadership. I'm always give the best and reach the best in every role that I walk with.

PLANNER SMELTER

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

analyst

Research and Development Metallurgist . Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis

Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector

Seeking a full-time position in Quality Assurance

Junior GIS Specialist ( Mapinfo pro. - Arc GIS .....).. Geologist

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

7 years engineering and management experience in the oil and gas industry. PMP certified with extensive civil engineering experience.

SAP FICO consultant with 10 years experience

Graduated in the field of Mechanical Engineering and presently working with one of ADNOC Group of companies as a Maintenance Planner / Scheduler (Mechanical). Have been associated with Oil & Gas sector for more than 4 years. Work experience on CMMS and Primavera skills.

A senior cost & controls engineer with extensive experience and a professional qualification in Mechanical Engineering coupled with a strong background in project management,project controls, contracts administration,variation orders &claims management.International experience in large EPIC projects

Seeking Chemist or Laboratory Technician Position-will relocate

Research Thesis on ANTENNA/RF

Plant operations supervisor / trainer, remote overseas locations

Can handle all operations of a mine surface or underground. See resume for additional experience and qualifications.

Strong knowledge in electronics industries PCB design, assembling, trouble shooting

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Geologist with background experience in Mining and Exploration of mineral resources- gold and base metals. QAQC for sampling projects. Ability to prepare technical Exploration reports for Project Managers incl drilling proposals.MapInfo, Micro-Mine, Vulcan, MP3, MS-packages.Ore reserve calculation

I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Multi-skilled operator, decision making

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out