Resume - Pressure Vessels; Package Equipment; Static Equipment; Compress, PV Elite, Auto ...

Misco Jobs

Resume #79593

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To look for challenging work which will utilize my skills and experience in static equipment design, requisitioning, bid evaluation, selection of equipment and vendor documents reviews.

PROFILE
- Over 13 years of strong mechanical experience in equipment design in EPCM and Fabrication industries.
- Experienced in Oil Sands SAGD projects, Refinery projects, Petrochemical and Chemical Industries projects.
- I have handled following major equipment
* Treater – 4,877 mm ID x 36,576 mm S/S Horizontal Dual Polarity Electrostatic Treater o Design pressure 1,470 kPag, and temperature of 163°C
o Designed for Dilbit flow rate of 324,102 kg/hr
* FWKO – 5,791 mm OD x 19,182 S/S Horizontal Free Water Knock Out Drums o Design pressure 1,470 kPag, and temperature of 163°C
o Designed for Dilbit flow rate of 380,283 kg/hr and Produced water flow rate 588,123 kg/hr
* High Pressure Steam Separator – 1,371 mm ID x 8,534 mm S/S vertical vessel c/w SS vanes o Design pressure 14,700 kPag and temperature of 343°C. Shell thickness 89mm (3.5")
o Designed to process 384,540 kg/hr of 75% steam. Separation efficiency of 99.7 % and 100 % for more than 8 microns of droplets removal from steam.
* Diluent Stripper Column – 5,487 mm ID x 28,823 mm T/T vertical vessel o Design pressure 525 kPag and temperature 350°C.
o Material of construction CS and SA-264 (CS+317L Clad), Internals SS 317L
- Experienced in detailed design calculation reports, preparation of engineering data sheets, bid documents, bid evaluation & recommendations, preparation of purchase requirement (MRP), shop fabrication drawings, trouble shooting of design problems resulting from shop and field capabilities and final documentation.
- Have good knowledge of welding and non-destructive testing.
- Fully conversant with ASME Sec. VIII Div. 1, TEMA (R, B, C), ASME (B16.5, B16.47, B31.3), BS 5500, API (650), UBC, NBC, AISC.
- Fully conversant with material specifications (ASME Sec II – Parts A,B,C,D, ASTM, DIN, BS), welding requirements (Sec IX), PWHT / NDE / MDMT requirements. Interact with all combination of materials like carbon steel, stainless steel, HIC and NACE resistant steels, and non-ferrous material.
- Wind and seismic analysis, Zick analysis, Nozzle reinforcement calculations (self reinforced, axial, radial), pressure calculations (internal & external), flange design, tube-sheets, local load analysis (WRC 107, BS 5500), support design (saddle, leg, lug, skirt), lifting arrangement.
- Hands-on experience with design handbooks such as Bedner, Megyesy, Brownell & Young, Moss etc.
- Fully familiar with PFD, P&ID, HAZOP reviews and model reviews.
- Technical coordination among various disciplines, vendors and clients.
- Excels in fast paced environment; successfully meets critical deadlines.
- Self-motivated, goal-orientated team player with effective communication and interpersonal skills.

Education & Certification

- BSc., First class with Distinction, 1995, Mechanical Engineering, The Maharaja Sayajirao University of Baroda (Baroda, India)
- Post Graduate Certificate course in Industrial Purchasing and Materials management, 1996-97, The Maharaja Sayajirao University of Baroda (Baroda, India)
- NDT level – II in radiography testing
- Internal Quality Auditing course certification – Lloyd's Register

ASSOCIATIONS/MEMBERSHIPS

- Association of Professional Engineers, Geologists and Geophysicists of Alberta (APEGGA) - Professional Engineer
- Professional Engineer of Ontario (PEO)

Computer Skill

- Design software: Compress, Code Calc, PV-elite, B-Jac, In house developed software/excel spread sheets
- AutoCAD 2004/2002/2000 and 14 (Custom AutoCAD Mechanical certification – Solid Caddgroup Inc), Vessel drafting programme, Visio
- Windows, MS-office (MS-Excel, MS-Word) & Internet utilities.

EMPLOYMENT HISTORY
Jacobs Canada Inc – Calgary, Alberta Sept 2005- Jan 2009
Senior Mechanical Engineer
- Preparation of equipment datasheet, RFQ packages for bid.
- Design run for the equipment thickness with applicable loading.
- Prepare and update mechanical equipment list and cost estimates.
- Carry out review of vendors' bids and documentations for technical acceptability. Prepare technical recommendation to select technically acceptable, safe and economical mechanical equipment and packages.
- Carry out above functions as per department work instructions, quality management manual, customer's specifications and codes & standards.
- Preparation of material requisition for purchase.
- Review of vendor drawings, documents and design calculation. Compare calculations with design run.
- Interfacing with vendor, other departments and client.
- Trouble shooting fabrication queries and maintain correspondence track.
- As built datasheet preparation.

Projects Handled
- Suncor Firebag 3+ (SAGD-62.5 kbcd design capacity / stage 3,4,5&6 - Total 250 kbcd)
- Suncor Energy o Responsible Engineer for Treater and Free Water Knock Out Package, High Pressure Steam Separators, Diluent Stripper Column, Flash Drums, Rich Fuel Gas Separator and Mixed Fuel Gas Separators
- K3 Sulphur plant SuperClaus retrofit - Central Alberta Mid Stream o The project is retrofit job. Trouble shoot site and/or fabrication queries for retrofit and new equipment.
- Shell Carmon Creek - Shell Canada o The project is a conceptual design and feasibility study for SAGD plant.
o Prepare cost estimate for static equipment

WorleyParsons MEG – Calgary, Alberta July 2005 – Sept 2005
Jr. Mechanical Engineer
- Preparation of equipment datasheet, RFQ packages for bid.
- Preparation of bid analysis and recommendations for static equipment and packaged equipment.
- Review of vendor drawings and design calculations.

Designer / Engineer
Pro-Bel Engineering Limited – Ajax, Ontario Oct 2003-May 2005
Equicon Engineering Limited – Mississauga, Ontario Feb 2001- Oct 2003
- Detail study of clients'/customers' architectural and structural drawings.
- Preparation of concept drawing c/w design calculation for incorporation in shop drawings.
- Preparation of shop drawings and fabrication drawings on Auto-cad.
- Preparing design calculation for rigging sleeves, anchors and davits for approval of professional engineer.
- Preparation of fabrication drawing with bill of materials, welding sizes, tolerances.

Mechanical Design Engineer
L&T Chiyoda Limited - Baroda, India Jun 1998- Sep 2000
Project Technologists Pvt. Ltd. - Baroda, India Aug 1995- Jun 1998
Engineering, procurement, fabrication and construction related to oil and gas, refinery, petrochemical, chemical industries.
- Detail Engineering experience of static mechanical equipment such as pressure vessels, heat exchangers, columns, storage tanks and other process equipments.
- Experienced for different types of heat exchangers.
- Engineering drawing and vendor drawing checking experience.
- Supervise, schedule and coordinate design and engineering work.
- Interface with vendor and consultant for the approval of drawing and design calculations.
- Co-ordination with process, piping, instrumentation and civil department for interfacing.
- Proposal engineering for equipment with Technical Bid Analysis (TBA). Contacted appropriate vendors and conducted techno-commercial evaluation of offers.
- Site deputation for erection of vessels, columns, heat exchangers, tanks, converters, sulphur condensers, combustion chamber
- Preparation of overall project cost, materials, item specification & indenting of materials.
- Verified and approved equipment drawings for mechanical design done by other engineers or by vendors.
- Validation of software.

Projects Handled
- Solvent Deoiling / Dewaxing Unit - Indian Oil Corporation Limited (IOCL) Digboi, India o Responsible Engineer for Heat Exchanger mechanical designs.
- Sulphur Recovery Unit - Bharat Petroleum Company Limited (BPCL) Mumbai, India
Sulphur Recovery Unit - Madras Refinery Limited (MRL) Madras, India o Responsible Engineer for Pressure Vessels, Sulphur Condensers, West Heat Boiler, Vacuum towers.

REFERANCE: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 1852)

Go to Search Parameters...

Brief Description

Maintenance manager

Exploration,Groundtruths-GPS,Drilling - Log analysis,M.Tech,81%, Geological Remote Sensing and GIS,Centre For Remote Sensing,BARD University,2005

Laboratory Analysis, Administration, Safety

Qualifications- NEBOSH Certification, OSHA-510 Certification and OSHA-500 Trainer Certification. Skills- HSE Mgt System, QA/QC Mgt System, Contractor HSE Mgt, Project Mgt, Personnel HSE Training, Regulatory Compliance Mgt, Resource Management, Sustainable Development & Conflict Resolution.

Geologist available immediately for contract work in Mineral or Oil & Gas Exploration and Environmental

As a professional in oil and gas industry with 10 years experiences, I have been working in various positions : Supervisory; Instrument- Control, Power System, Reliability Engineering; and Maintenance Planner. Within these positions, I have greatly enhance my analytical & mangerial skills

Mechanical Engineering Technologist

Project Recruitment Specialist

LANGUAGES Basics of C & C++, OPERATING SYSTEMS MS-Office, Windows 2000, XP. APPLICATIONS MS-OFFICE

As an Electrical Engineer with some Experiences and Qualifications, include Instrumentation, PLCs, Control and Automation, High Technology Machineries and Equipmens Applications Skill, Engineering & Project Management, Computer Applications, Communications, and Leadership Skill.

Pressure Vessels; Package Equipment; Static Equipment; Compress, PV Elite, Auto cad Software

Solid Waste Management, Health, Safety and Environmental Management, Fumigation, Site Inspection, First Aid Service etc.

SALES , MARKETING AND PROPOSALS ENGINEER.

IT Project Management, IT Infrastructure/Network Specialist, DRP & DRS Projects, ERP Implementations, Systems Administration & Support, etc. / Bachelor of Science in Computer Science (BCS).

African experienced exploration hydrogeo / geologist Liberia Ethiopia Sudan

A highly motivated intelligent manager, who is very hard worker both individually and in a team, copes well under pressure, well presented, enthusiastic. Excellent communications skills, creative, and problem solving skills, and an effective organizer. Adaptable to new situation, determined

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

LICENCED AIRCRAFT MAINTENANCE ENGINEER

Having 5 years experience in mining operation and related management of environment. Also 4 years of experience in Marketing of Earth Moving/Mining Eqpts. Btech Degree in Mining Engineering, PG Diploma in Environmental Management, Also PG Diploma in Business Management

Inspeection and repairs Daf Trucks, Matlab, Simulink, Excel, MS Word

Senior Engineer, Project Controls, PMP ( Civil Engineer) with 5 years exp. in Project Planning & Controls

Automatic control panels design, microcontroller programming.

Cu Au Exploration Geologist

Cad design, cnc machine operation, electrician residential, commercial and power company

Electrical Manager with 15 years Project Management & Maintenance Experience with Hands on Experience on 220KV, Hot ESP, 4000KW VVVF drive, Furnace Transformers etc

GIS, Geologist have more than 7yrs experience, ArcGIS, CAd, GPS, Field survey

B.E Mechanical Engineer with 3.4 years Direct Sales & Marketing Experience

Certified CISCO, CCNA (Cisco Certified Network Associate), Microsoft Certified Windows 2000 Server, Microsoft Certified Windows XP Professional, Certified VLSI-Based Communication Application Design, Very Good knowledge of Operating Systems Win 3.11/95/98/ME/2000NT, Good knowledge of GSM and GPRS

Mechanical Engieer

Electrical Eng./Supervisor - Power Plant

7 years experience in designing structure,Mechanical & piping systems in 2D & 3D, using AutoCAD 2008, fast learner of new design programs, use MechQ full suite, Cadworx pipe, Bentley Plantspace v8, Bentley Navigator, no problem to work with other designing software

A Procurement and Logistics professional with comprehensive experience of administration, procurement, contracts, logistics and management

Occupational Hygiene

I’m a mechanical engineer with more than fifteen years of experience in project engineering, project management, procurement and maintenance management. I’m a team oriented person with excellent communication skills and strong leadership.

Hard Worker, Honest, Trust, Finish objectives in time and in proper way

I'm a 23 years old guy done with his Electronics BS degree with minor study of Biomedical engineering and a 3years experience in this field and I'm going to graduate with my second BS degree in Electrical engineering in February 2008.. I'm looking to be a part of a team in good company..

Sub: Application for the post of Head (Geotechnical Design)

High Voltage 3.3 - 275 KV , SAP maintenance programmer

Fresher with diploma&engineering and with good knowledge in design and design softwares like CATIA,UG,PRO-E

I have done a 4year degree course (B.Tech) in Mechanical Engineering from an autonomous institute. My software knowledge is eqipped with Auto Cad and Pro-E Softwares.My communication skills are excellent.

I am entry level Geological Engineer eager and willing to learn and see the world!

Mechanical Engineer hands-on

diesel engine mechanic, rig mechanic , generator mechanic

Engineering Management/Research Consulting Position—where my environmental, health and safety engineering research expertise, industrial engineering competencies, effective communication skills, strong leadership qualities, and potential to conceptualize and implement improvement initiatives

PhD in geochemistry, experience in trace and major elements, radiogenic Isotopes (Sr-Nd-Rb-Sm-Pb-Hf) and U-series isotopes. My research focused on the application of short-lived, U-series isotopic disequilibria to constrain, the time scales of magma formation, transport and differentiation.

WELDING ENGINEERING, WELDING INSPECTIONS, MANAGEMENT, QA/QC, NDT INSPECTION

B Tech Polymer Engineer, MBA - Financial Management, 3 years experience as Quality controller and 1 year as Accounts Assistant

Junior Engineering Design and Drafting Technologist

Professional engineer with wide ranging international experience in project, engineering, reliability, business development, sales and commissioning of refinery.

Hope to work as ore control/exploration geologist to provide information to the mine regarding the type, quantity, and quality of blasted material in the mine. Provide knowledge to ore control geologist with data entry and geologic interpretation. Assist ore control geologist with blast hole logging

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out