Resume - My capabilities have been achieved through many experiences which include traini...

Misco Jobs

Resume #80378

CONTACT INFORMATION:
View contact information...

I am seeking a challenging position utilizing my professional experience, skills, education, with motivation to grow and advance.

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.
The support includes the use Microsoft and CAD software. My experience spans the use of excel functions, such as logic equations and tools such as data links, assisting in the migration of data to and from CAD, reducing the need of redundant data entry.
A primary objective has been to focus on the improvement of productivity. By stream lining the design process; understanding local & regional jurisdictional standards and UBC codes. By using specific tools; road sections can be created, specific singular modifications can be made, benches at right of ways can be extended, cut/fill slopes modified,… as break lines are imported defining centerlines, flow lines, curbs and daylight boundaries. Subsequently; in highway design, drainage problems are identified, super-elevated curves are manipulated as speed changes effect site distances and in residential design, pad elevations projected. A 3D model is created,… rendered. With minimal effort you now can then provide volume calculations, quantity takes-offs and area tables using CAD tools and VBA/lisps.
My recent experience has allowed me to model in excess of 80 existing pipelines (tile drains); created within 5 pipe networks. In addition, proposed sewer, water and storm drain networks. The model included multiple surfaces; existing ground, multiple proposed rough and finish grade surfaces derived from a tentative tract map of a master planned community encompassed by of 3 major arterials. As well as the natural water level since the project was located at a negative surface level. The key purpose was to show the impact each existing pipeline had on the proposed and how each surface impacted each other. By cutting sections across model we were able to identify the multiple impacts, enabling us to alter specific pipelines, utilities and roadways as needed.
My experience includes many public works projects, from sewer and water extensions, to roadway widening, culvert crossings along with miles of overlay. I have assisting in the process identifying cost savings by eliminating excessive removals with the use of survey data verse proposed designs. This was achieved by manipulating roadway designs, adjusting site distances and other vertical design criteria.
Additionally, I am familiar with military environment and I have over ten years of experience working in the compressed gas industry; including the design, installation and maintenance of automated control systems for piping, storage vessels, cryogenic pumps, and vaporizers. Including the use of analytical hardware and processes used to maintain component purity.

In this brief summary, my objective has been to give you a small explanation of how my level of experience with the use of a continuously evolving software, can productively, through planning and with incite perform as a Sr Designer/Project Engineer.

OBJECTIVE

I am seeking a challenging position utilizing my professional experience, skills, education, with motivation to grow and advance.
My objective has been to give you a small explanation of how my experience with the use of a continuously evolving software, can productively, through planning and with incite perform as a Sr Designer/Project Engineer.

EXPERIENCE

2008- Present Sr. Cad Technician
Engineering Consulting Services, Inc. Lexington, KY

Responsible for the design and creation of surface mining maps for permitting the extraction of geologic coal seams. Using design methods and Cad standards as defined by the state standards and other specific requirements defined.
Responsible for running earthwork calculations; volume take-offs, etc.
Responsible for initiating in house design standards and continuing advancements towards bringing the latest Cad technologies on line and in use. Lead and coordinate user as advancements are established.
Review drawing and designs, files, naming conventions to ensure adherence to established standards.
Responsible for preparing planning exhibits and conceptual designs through verbal and written communication.
In charge of maintaining of overall design, file structures, and design standards for assigned projects.

2005- 2008 Project Engineer \ Sr. Designer
K & A Engineering, Corona, CA

Responsible for the design and creation of TTM's, on through the production of rough grading, street, sewer and water…etc. Using design methods and standards as defined by jurisdictional standards and other specific requirements defined. Responsible for the direct transition into production as a final design is approved.
Responsible for running earthwork calculations; volume take-offs, etc.
Responsible for coordinating design teams, ensure smooth, correct and timely production of workload.
Responsible for continuing advancements towards bringing Civil 3d (2008) on line in our office. Lead and coordinate user lunch and learning events, coordinate training on site or off site. Review drawing and designs, files, naming conventions to ensure adherence to established standards.
Responsible for preparing planning exhibits and conceptual designs through verbal and written communication from clients.
Responsible for communication and coordination to maintain client relationships.
Responsible for billings and budgets.
In charge of maintaining of overall design, file structures, and design standards for assigned projects.

2000- 2005 Designer / Project Engineer
Nolte Associates, Corona, CA

Responsible for training, Cadd support, project file structures and design standards for Corona office.
Design and processing of subdivision and public roadway projects.
Responsible for keeping projects within budget.
Responsible for dealing directly clients.
In charge of maintaining the CSUF Master Plan. Working directly with CSUF engineering department. Point of contact for all new projects for ongoing CSUF expansions. (Projects to date; Parking structure I, & II, College blvd. realignment and the addition of the new Law college expansion)

1997-2000 Computer Design/Engineer, Partner
Gas Technology Systems, LLC

Designed, programmed, built and installed Automated Compressed Gas filling & Analytical (data acquisition) systems into regional Gas plants.
Gas Systems automated the complete process from the Storage vessels, the cryogenic pumps, vaporizers, to the single cylinder filling manifolds to pallet filling of air gases (Ar, N2, O2) and other components (CO2, He & H2) to mixtures.

Analytical System also automated the process of analyzing the components validating the specific specifications for different products (industrial, food, high purity and medical grades). The automated process controlled trace oxygen, moisture, hydrocarbon analyzers measuring specific components to part per million levels. The system controlled gas chromatographs with differing columns to quantify percent of ingredients.
Create customized software allowing single point selection of component, or mixture from a customized database.
Created new programs to facilitate the processing DOT requirements for Medical Gases.
Provided 24/7 support, including onsite training for end users and
Administrators.
Linked filling process to second party tracking software.

1993 - 1997 Computer Design/Engineer, Owner
MJK Analytical Systems

Designed, programmed, built and installed Automated Compressed Gas filling systems.
Automated the process of pumping cryogenic (liquid) air gases (Ar, N2, O2) and other mixing components (CO2, He & H2) using high pressure cryogenic pumps, ambient and high temperature vaporizer to fill high pressure cylinders. The process used pressure vs. temperature and/or weight to measure the appropriate volumes.
Create software allowing single point selection of component, or mixture from a customized database.
Created programs to facilitate the processing DOT requirements for Medical
Gases.
Provided one-on-one onsite training for users and administrators.

1990 - 1993 Technician
Air Liquide, Inc
Santa Fe Springs Ca & Walnut Creek, Ca

Responsible for maintaining plant processes.
Responsible for designing and installing new processed upgrading existing plant design.
Investigated existing plant production for funding of production enhancements.
Responsible for training, production crew for OSA requirements, basic operation and plant updates.
Worked globally with Air Liquide headquarters USA, Canada & France, enhancing and developing worldwide production methods.

EDUCATION

1980 - 1983 USMC, Paris Island, SC Combat Engineer
Camp Lejuene, NC Journeymen (Engineer Training)
Camp Pendleton, CA Demolitions (Combat Engineering)

1983-1985 University New Hampshire, Industrial Electronics
Associates in industrial Electronics
Durham, N.H.

1986 Beta Technical Institute
Computer Added Drafting Technologies,
Bellflower, CA

2003-2005
2008 Fall Mount San Jacinto Community College,
Continuing my pursuing for an EIT
Menifee, CA

Ongoing Courses in AutoCAD, Land Development Desktop, Civil 3D, 2006, 2008
Carlson, Civil
Microstation, Inroads
Microsoft: Word, Excel, Access, PowerPoint

*Private & Public Project Experience and Referrals upon request.

SKILLS

Software AutoCAD, Land Development Desktop, Civil 3D, thru- 2008
Carlson, MapCad, Microstation, Terramodel
Haestad Methods; Storm CAD - Storm & sewer Systems
Microsoft: Word, Excel, Access, PowerPoint

Areas of Design Commercial, mapping, grading, drainage, engineered waste management plans Land Development, residential tracts, grading and earthwork,
Mapping, Final maps, Tentative Tract Maps, Permitting
Public works, utility extensions, roadway widening, rehab/overlays
Road design, widening, striping, rehab/overlays
Utilities; sewer & water, storm Drain.

During the time I worked with Engineering services I used core samples to identify coal seams within 4 adjacent permits. With client input the specific mining types were identified by seam. Using aerial topography a collective 3d model was built. Using contour, area or augur mining, an undercut surface was built projecting from down from upper most seam with defined slopes and benches. With the subsurface built a post surface is projected from the lowest seam matching the preexisting terrain unless added criteria were defined. Volumes were the extrapolated for spoils, reclamation and coal for each permit.
When I began with K & A Engineering I assisted in providing initial engineering services preparing lot studies, land use plans, utility layouts and tentative tracts maps, in addition to providing mapping. I lead the generation of a continuously evolving 3d surface with infrastructure for eight of twelve concurrent tentative tract maps for the Boulder Springs project.
Once final engineering was underway, I assisted in the prepared Rough Grading Plans, Street improvement Plans, Sewer and Water Improvement Plans. These plans included off site Sewer Lift Stations, 8,000 feet of off site sewer main with 5,000 feet being a force main.
Once Final engineering was underway on the Boulder Springs South project I began working on as the project engineer. This project was similar, starting with 334 lots on the tentative map. This project was intricate because the project was split by a 300' wide water course being crossed by a 6 lane arterial. The crossing requiring three 40' by 9' arch culverts. Additionally in order to provide secondary access to the second half of the project it was necessary to run an arterial to the nearest primary county route three miles away. This added a lot of coordination since the undeveloped land had existing tentative tract maps owned by multiple developers.
Working with Nolte Associates I worked on Canyon Heights which is a 400-lot subdivision rated as rural mountainous, which has slopes of 25% or greater. Beside the normal challenges, it was necessary to make drastic changes to the adjacent primary access road after new county ordinances upgraded its speed and capacity. In turn it became necessary to minimize right of ways, super elevated the cross-section to met speed requirements and enable site distance requirements to be met.
The project design included: constructing a grass-lined, trapezoidal, channel section in an existing unnamed stream bed; the construction of drop structures; a rip rap revetment to protect proposed homes; off-channel water quality basins and an existing, "in-channel", 65-acre-ft, detention basin.
Another stimulating project was for the City of Poway making improvements to Poway road (one mile). The project included the widening, the construction of landscaped center medians, pavement rehabilitation, restriping for increased street capacity and the reconstruction of an adjacent earth channel. Additionally, as part of the widening, the expansion of & addition of a box culvert, doubling the capacity was necessary.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 1870)

Go to Search Parameters...

Brief Description

MSc Mining geology student graduating this summer. Looking for a summer project in association with a company, preferrably in exploration, hopefully leading to employment. Interests are in Gold and Ni-Cu-PGE exploration. Extensive field experience in remote areas.

Inventory Management, Materials Planning, ERP, Heavy fabrication, Production planning, Project Management, M.S Project, Supply Chain, Manpower handling, ALPS, Erection, MS Office, Internet Researcher, MATLAB, C, C++ and AutoCAD

Graduating student with B.S. in Mining Engineering. Experience in Surface M/NM, Underground Coal, Underground M/NM. Extensive Computer Application background. Seeking International Employment.

Automation and Instrumentation Specialist. College diploma in industrial electronics (Teccart Institute) option: regulation, instrumentation and automation. Graduated with distinction, May 1999.

Diverse experience in the fields of failure analyses, corrosion of steels, protective coatings and paint film systems, welding and materials selection, complemented by a strong background in mechanical engineering. Excellent communication and organization skills, dedicated to quality and accuracy wi

Geologist

MSc Engineerign Geology, experienced in geotechnical engineering designs and SI

Vast experience in Engineering, Construction, Mining and Design:

I did BE Mech in 1999. I've Five years Experience in Die Casting field. Experience in Design and Manufacturing of Pdc dies. My skill is to prepare the fmea meeting of designing area with checklist presentation ie. functional & design related points and then all the drgs are submitted to Mfg team.

Rotating Equipment Engineer, Maintenance Engineer, Vibration Engineer, Reliability Engineer, Mechanical Engineer

Bsc (Hons) Surveying, 5 years experience, Competent with setting out, topograghical surveys, mine surveys,cadastral surveys

Logistics, Technology, Transport and Management Professional

Quality, Health & Safety and Environment Management/Auditing

A seasoned, highly organized construction professional with over 39 years of heavy industry experience which includes both industrial construction sites and field/shop fabrication locations in all major industries worldwide

Unlicensed Engineer, Diesel Mechanic

I am an experienced Mechanical Engineer in the field of Design & Welding (IWE) Engineering. I obtained my Dipl-Ing. certificate (equivalent of MSc(Eng.) in Design and Construction of Agricultural and Construction Machinery from the Technical University of Berlin in Germany

Diploma in Surveying; Profficient in SURPAC; AutoCad, Vcad

Project Manager, Business Systems Analyst, and Information Developer

Mining Diploma, Bachelor's degree in Mining Engineering

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

Land Surveyor Crew Chief

I am trained in the mechanics and operation of back hoe, bobcat, jack hammer, dumptruck, forklift, sissor lift, crane(boom truck), delimber, and rock crusher. I also have skills with tack welding, drafting and construction.

GIS Specialist, MTech(GIS), M.Sc & B.Sc Honors(Geology), Expert in ArcGIS, AutoCad, MapInfo and database managment.

I am a Graduate Mining Engineer with 11 years of wide experience in different Mining Operations. Currently Located at London UK.

B.Sc. , Microsoft® & CCNA Certified / 10-years IT experience in India/GULF

Fitter Including Machining and Diesel Fitting

• More than ten years experience in project/operation management and real estate development

Marketing and Software experience with Oil & Gas (drilling) background

graduate metallurgist and holder of BSc Min in Metallurgy and Mineral Processing from the University of Zambia with merit.Am currently working for Konkola Copper Mines (KCM) at the Nchanga Tailings Leach Plant as a metallurgist.

Wireline engineer (Trainee Engineer, Junoir Engineer, Field Engineer)

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

Construction manager, laborer, Class A CDL Drivers license, mechanic

Maufacturing Automation

I have work experience in United States, SE Asia, and China. I am a registered Professional Engineer (Civil) in State of California, USA. I am looking for a professional/managerial position in civil engineering/construction. Project experience and publications are available upon request.

With 8 years of extensive management & engineering experience in construction field, I seek a senior management position which will allow me to utilize my experience at higher positions.

A female mechanical Engineer with good analytical skills and can work effectively in a team.

I am a graduate in Chemical and Process Engineering.

Surveyor engineer, civil Engineer, quantity surveyor

US mining engineer with Masters in mineral economics. Will relocate anywhere.

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

Telecommunication Engineer seeking a Summer Internship with high skills in wireless and broadband sector. Proficient in C,C++ and JAVA programming.

I am a plant and piping designer (PDS) - 11 year experience

see resume

Mechanical Engineer with approximately four years experience in a variety of industries including Oil and Gas, Commercial HVAC, Mining, and Power (Utilities). I have been involved in the design and layout of mechanical systems, technical writing (spec's and reports) and pipe stress analysis.

Senior Document Controller. 9 years experience. Oil & Gas, pharmaceuticals, petrochemicals. Bachelor of Science in Electrical Engineering graduate. Using WebDMS. Electronic transmittals, document store, electronic issue of documents. ISO standards. Can lead Doc con group. Coordinate with Clients,

D.A.E. (Mechanical) 1970/3300 Second 1989

Exploration geologist: Geological mapping, hydrogeological modelling with modflow, sedimentary petrography and petrophysics (cathodoluminescence), drilling supervision, geotechnical investigations: SPT, CPT, seabed CPT, Vibrocore, Softwares: Arcgis, Modflow, Terrasurf, Qinsy

I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out