Resume - Nace level 3 coating inspector, CINI certified insulation inspector & Chartek ce...

Misco Jobs

Resume #80431

CONTACT INFORMATION:
View contact information...

Nationality: Dutch
Languages: Dutch, English and German, fluent in speak & writing

Education: MBO-High school painter school / Nimeto
Corrosion engineering study
Chemistry study at former employer/Paint manufacturer.

Computer skills: MS-office / Excel etc. (Notebook etc available)

Certificates: NACE Certified Coating Inspector # 12470 / Level 3.
Chartek Certified PFP Inspector/ Certificate no. EMEA-
QC029 VCA ** Safety course certificate.
CINI Full Certified Insulation Inspector Thermal /
Acoustic & Cryogenic.

Work location: Worldwide

Mobility: Single International Mobile, Rotational, Hardship
Location.

Training: NACE CIP course level I, II and III Peer review.
: Chartek Approved Fireproofing Inspector.
: NTCI CINI full insulation course
: Sigma Coatings training course(s) on corrosion and corrosion control.
: Course on application and inspection of passive fire proofing materials-AkzoNobel/Chartek
: Plural component pump applications WiWa-Germany
: VOM courses surface treatment / anodizing / Galvanic 1
& 2
: NACE Bridge and marine stamp soon.
: Chemistry and corrosion courses.

Professional Membership: NACE - National Association of Corrosion Engineers

Professional Equipment: Owns latest and most sophisticated equipment for professional inspection, surveying, claim investigation etc.

SUMMARY OF EXPERIENCE

Over twenty years as Senior Coating Inspector / Coating Consultant / Coating Surveyor / Coating Supervisor / Coating superintendent/ fireproofing inspector / Insulation inspector.

Fully conversant with a diversified range of coatings, paints, paint techniques, and specialized coatings such as; Spray Applied Coatings, Reinforced Linings, Thermal Spray (flame and arc), Pipe Coatings, Tank Refurbishment, Fireproofing Coatings, Plural Component Spray, Shop Painting, Floor Coatings, Cementitous Coatings, Inorganic Zinc Silicates, Yacht Coatings, Rubber Coatings, Fouling Release and Hot and Cold Insulation, Ceramic coatings etc.

FULLTIME INSPECTION

2007 Oktober- Present/ ending March/April 2009
Client – BP Norge A/S
Project – Valhall Re-development Project.
Duties – BP coating inspector / fireproofing inspector / insulation inspector.

2007 September- 2007 October
Client – Beckers Netherlands
Project – Re-fit / Tank coating and hull coating Thailand.
Duties – Owners coating representative.

2007 July – 2007 August
Client – Pamela Shipping Belgium
Project – Tank refurbishment project
Duties – Owners coating representative.

2007 May – 2007 July
Client – BP Belgium
Project – Land storage tank refurbishment project
Duties – Owners coating representative.

2006 November - 2007 April
Client - Chevron Houston USA.
Project - Chevron Nigeria Escavados Gas Project Phase 3A / Frade FPSO project –
Abu Dhabi / Dubai UAE
Duties - Owners Coating Inspector / Senior Coating Inspector

2006 September- 2006 October
Client - Disney Cruise lines USA
Project - Refurbishment Cruise liner MV Disney Wonder / Norfolk USA
Duties - Senior Coating Inspector / Team leader inspection team.

2006 August-2006 September
Client - Wisco USA
Project - FBE pipeline Turkey Socotherm / Adria Italy
Duties - Senior Coating Inspector, owner's representative

2006 April - August 2006
Client - Dutch Government
Project - BMK Project / Watergate dam refurbishment / Netherlands
Duties - Senior Coating Inspector/Consultant

2005 October-2006 April
Client - Van Uden international Shipping
Project - Conversion / refurbishment of two Ro-Ro vessels / Tivat Montenegro
Duties - Owners Coating Representative

2005 September
Client - Noble Drilling USA
Project - Refurbishment Drilling Platform Al White / the Netherlands.
Duties - Owners Coating Representative / Coating Inspector

2005 July – 2005 September
Client - Wagenborg Shipping
Project – Refurbishment MV Slingeborg Gothenborg Sweden.
Duties - Owners Representative / Coating Inspector

2005 June -2005 July
Client - ADM Europoort / Chemical Plant
Project – HCL tank refurbishment / Insurance job
Duties – Insurance Coating Inspector.

2005 May - 2005 June
Client - Flinter B.V.
Project - Tank and hull re-coating program / Las Palmas Canaries islands.
Duties - Owners Representative / Coating Inspector

2005 May
Client - Wagenborg Shipping
Project - Hull recoating with hot spray Ice class coat. Bremerhafen Germany
Duties - Owners Representative / Coating Inspector

2005 April
Client - Jotun Netherlands
Project – Super Yacht MV Berzinc / Complete Hull recoating.
Duty - Senior Coating Inspector

2005 February - 2005 April
Client - Fabricom GTI/Sicon Major Projects
Project - STATOIL Hammerfest Snowwhite COLDBOX Assembly Project Antwerp/Belgium
Duties - Senior Coating Inspector/Fireproofing/Insulation Inspector

2004 August - 2005 March
Client - Dutch Government / Province State Department.
Project - Complete refurbishment and Recoating of Boskoop bridge
Duties - Project manager / Coating supervisor.

2004 January - 2004 March
Client - Allseas Group S.A.
Project - Full recoating of hull pipe laying vessel / Freeport Grand Bahamas
Duties - Owners representative / Senior Coating Inspector.

2003 June – 2003 September
Client - Vroon Shipping
Project - Full recoating of hull vessel and tank survey / Viano di Costello Portugal
Duties - Owners representative / Senior Coating Inspector.

2003 June - 2003 July
Client - Heerema Marine Contractors
Project - Survey Crane Vessel Hermod / Fort Fuchon USA
Duties - Owners representative / Senior Coating Inspector.

2003 January - 2003 June
Client - Sigma Coatings Netherlands.
Project - Several Surveys / Far East Asia.
Duties - Senior Coating Inspector.

2003 January – 1991 October
Worldwide inspections / survey etc. Chief / senior coating inspector for Sigma Coatings international inspection and field services department. FPSO's, FSO's, VLCC's, Offshore modules, Bridges, Tank Linings etc.

EMPLOYERS AND DUTIES

Freelance
2003 - present
NACE Certified Coating Inspector / Supervisor / Consultant and Surveyor at refineries, power plants, marine, yachts, offshore, Hot & cold + acoustic insulation inspector, fireproofing inspector

Sigma Coatings Netherlands
2003 January – 1991 October

Senior coating inspector International Field Department / Head Office Netherlands.

World wide tank coating projects. New building of tankers, Bulk carriers, Bridges, Tank rehabilitation and refurbishments, FPSO's, FSO's, Offshore installations and modules, Yachting, Team leader of inspection teams.

DNC/DNL/ Paint contractors
1991 October - January 1991

Assistant manager paint contractors in Netherlands and abroad

In charge of large projects as assistant project manager in new building and renovation i.e. maintenance offshore production platforms, drilling rigs, FPSO/ FSO/ FSU, marine jackets, topsides, ships, bridges, water gate dams, tank linings and refurbishment, pipelines FBE or coatings, TSA & TSZ ( thermal sprayed aluminum or zinc), cold and hot insulations etc worldwide. Worked with customers, owners and government, advisors, and naval and construction architects i.e. engineers world-wide.

International paint
1991- 1990
Paint Inspector
Paint Inspector on mostly ships either new building or dry dockings, FPSO / FSO, yachts but also pipelines and tank coating, structural constructions or plants, and offshore modules, topsides etc. The inspections were carried out world wide.

Maincon / Dietsmann / 3C / DNL
1990 – 1983
Foreman / Assistant project manager
Different contractors for onshore and offshore

After period as foreman to collect experience assisting the project manager for new building and maintenance of drilling oilrigs, production platforms also with riding squads at sea, cold and hot insulation, FPSO/FSO, pipelines, chemical plants, refineries, bridges etc.
Arranged labor, logistics etc. made calculations for pricing, product specifications and quality control and inspections etc.

REFERENCES (Also as manufacturers technical representative Sigma Coatings Marine / PC)

Chevron Texaco EGP Project - UAE
Pennzoil / Wintershall offshore platforms - Netherlands.
Unocal offshore platform - Netherlands.
Conoco offshore platform - Netherlands.
Paktank/Vopak new building plant / Singapore.
Elf Aquitaine platforms- Norway.
Vroon Shipping - Pusan Korea
NATO Tanks - Turkey, Iskenderun.
NATO Tanks – Malta, Valletta.
NATO Tanks – Gibraltar.
Norsk Hydro - Norway.
Öresund bridge – Sweden.
Roller coaster for Phantasia Bruhl –Germany.
Tanker refit project Beckers Thailand.
Socotherm Group pipe manufacturer – Italy / Nigeria.
Group five pipe. Pipe manufacturer – Republic South Africa.
SPS pipelines. FBE - Kenia
ABB Power station's – Aqcaba Jordan.
Snovit project Statoil Norway.
CPL- Tank refurbishments – Warri/ Port Harcort Nigeria
Allseas – Grand Bahamas
Barber Ship Management– Shanghai China
Statoil - Norway.
Kizomba A FPSO
Fertilizer plant new building – Orange Free State South Africa.
Float Glass Factory – Mersin Turkey.
Windmills – Netherlands
FPSO Turret Mooring Bluewater – Netherlands.
Bonga Project.
Umgeni water board Pipeline – Kwa-Zulu Nathal / South Africa.
Sea trucks/ West African Dry docks- Port Harcourt Nigeria
Maersk- Carena Abijan Ivory Coast
Maersk Malaysia.
MOL refinery – Budapest Hungary.
Petroland offshore-North sea.
Placid Oil offshore-North sea.
Mathilda bay Beer brewery- Freemantle Australia
Caltrex refinery – Australia.
Stena Lines - Ireland
Global offshore drilling platform – Port Gentil Gabon.
Heerema crane ship "Balder"-Rozenburg, Netherlands.
Heerema crane ship "Thialf"- West African Coast
Heerema crane ship "Hermod"- Fort Fuchon / New Orleans USA
MV Disney Wonder – Norfolk Virginia USA
P&O MV Ocean Princess cruise vessel – Italy / Grand Bahamas.
Princess lines MV Grand Princess cruise vessel - Italy
Princess lines MV Dawn Princess cruise vessel – Italy.
Princess lines MV Sun Princess cruise vessel – Italy.

COATING CONDITION SURVEYS

Heerema Marine Contractors

Thialf S.S.C.V Complete coating survey including tanks for 3 months.
Hermod S.S.C.V Coating survey of both cranes and A frames.
Balder S.S.C.V Coating survey of both cranes and A frames.

ADM Plant Rotterdam.

HCL tanks survey condition on rubber and glass lining.

Turkey

Bosphorus bridge survey condition to establish coating condition
NATO underground tanks Iskenderun.
Silos of float glass factory Mersin.
Pipelines at Hendek

Jordan

Aqaba Power plant survey. Was coating inspector at new building, survey after five years guarantee.

Kwa-Zulu Nathal South East Africa.

Drinking water pipe line of Umgeni valley water board survey of coating condition.
Was the responsible coating inspector during factory coating at Group Five Pipe in Johannesburg RSA.
Kenia

Nairobi ASP pipeline group. Surveyed pipelines coated with FBE for owner.

TANK COATINGS and LININGS
New building/maintenance, coating inspection, corrosion survey (incl. glass mat reinforced / hand lay up mat or chopped fiber spray) inorganic/organic and plural pump application at NATO, Vopak, Oil tanking,, Shell, Exxon, Elf, MOL, Petrobras, Q8 etc. in Russia, Europe, Africa, Middle East, Far East and Australia.

MARINE
For various ship owners such as Stolt Nielsen,, Jo Tankers, Barber, Royal Dutch Navy, Odfjell SA, Bluewater FPSO, Bergesen Norway, Heerema, Maersk etc.- tank linings, hull coatings, coating condition survey, maintenance, repair and new building in Europe, USA, Africa and Far East.

PLEASURE CRAFTS

Inspection of surface preparation, faring & yacht finish application on new buildings and for various yacht owners. Especially on fouling release coatings.

INSURANCE
Various coating inspection jobs on ship new buildings, ballast tanks, cargo tanks, hull coatings and chemical plants.

COATING DEVELOPMENT
As Senior Field Service Engineer involved with field development i.e. Fouling Release / Silicone coatings / Solvent free tank coatings / GRE tank linings field and laboratory tested in the U.S.A., South America, Netherlands, Scandinavia, Mediterranean Area, Africa and Far East Asia.

TROUBLE SHOOTING
As Senior Field Service Engineer and Freelance Inspector involved in handling and solving coating problems i.e. failures of various nature.

REPORTING
All the mentioned activities have been reported in detail to the customers in the English language.

COATING STANDARDS
Familiar with international coating standards like; A.S.T.M., ISO, N.A.C.E., S.S.P.C., etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 1874)

Go to Search Parameters...

Brief Description

I am a young energetic Mine Surveyor who has a three year diploma certicate from Kwame NkrumahUniversity of Science And Technology, School of Mines, Tarkwa, Ghana. I have the ability to deliver on time to time and with minimum supervision.

To obtain a challenging position that utilizes proven experience and skills.

Primavera Experience

I have completed B.E,(Electrical & Electronics Engg) in may 2006 with 70% as the aggregate from Anna University(Kamban engg College) India.Having 2 years experience in transformer manufacture, Being given to understand that you are entertaining candidates for various positions

Drilling professional for 20+ years; extensive international well construction supervisory experience; directional, drilling engineering and management experience; drilling project manager of China’s first horizontal multilateral CBM well.

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

As a Mining Engineer, I have technical knowledge and managament skills. Computer skills (MS Word, Excel, Power Point). Drilling, Blasting. Tunneling. Development, Preparation and Production.

Nace level 3 coating inspector, CINI certified insulation inspector & Chartek certified fireproofing inspector.

I am an engineer holding a university degree (B.Sc) in electrical engineering Aden - Yemen, I have 8 years experience, 5 years in electrical & electronics maintenance and 4 years experience in a Company in Saudi Arabia has Industrial agencies responsible of after sales services

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

I have 10 years experience in instrumentation and control field. I have designed, installed, tested, calibrated, start up, commissioned, maintained and repaired industrial electrical and instrumentation control systems and skilled in PLC, DCS, Programmable drive based control systems.

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

Civil engineer, Project Manager, contract Manager

Mining engineer with experience in strip mining and underground metals mines. Graduating with Master in 2007. Techinical interests in cut and fill mining.

Expertise in SIEMENS PLC & SCADA, B.E. (Electronics) from University of Pune

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

Strategic thinking Executive leading environmental, health and safety area. Recognized for assessing environmental, health and safety protocol, formulating and implementing highly effective policies, procedures and training to meet compliance, minimize injuries & reduce worker’s compensation claims.

I am having industrial sales experience of around 8 years in Hydraulics & filtration system & its component sales.

Qualifications: B.E (Mechanical). Graduated with second class, first division honors. Have an MEP consulting background with over 2 years experience. Advanced in: AutoCAD, Solid Works, Excel, Visual Basic programming, Word, TRACE heatload and Matlab programming.

Electrical engineering major in power .

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

Electronics and communication Engineer

Experienced Mechanical supervisor with over thirty years spent employed in the middle east.

GSM/CDMA Project Manager

Experienced & Seasoned Engineer

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

Contracts Manager

Im msc chemistry qualified chemist worked in iron ore mine in diff field as sampling,chemical and physical analysis, administration

Experienced Engineer, Diverse Background, Mining, Environmental

A chemist with technical skills trainings in Industrial Process Controls, Advanced PLC, Hydaulic Industrial Controls, PLC, Electro-Pneumatics, Calibration for Process Instrumentation, Advanced Industrial Motor Controls, Pneumatic Industrial Controls & Industrial Electrician

Project maintenance manager/planner/trainer

9 years of extensive experience in Project Management, Planning and Execution involving fabrication, erection & commissioning of Piping & Equipments in Nuclear Facilities, Petrochemicals, Aluminum Smelter and Gold Mine Projects.

Graduate in mining engineering,MBA in Operations Management,5 years experience in opencast mining

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

AutoCAD, AutoDesk, CATIA V5, Pro E, SolidWorks, MatLab, MathCAD, Maple, MDesign, Ricardo Wave, GT Suite, Fluent, BasicStamp, C++, C+, PSpice, and basic Java programming „« Windows operating systems, Microsoft Office

Maintnenace Foremen looking for longterm employment

Metallurgical Engineer

Speak, write and read French, English and Arabic. Abilities to acquire new knowledge and skills quickly

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

Extensive Experience in the industry!!

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

Instrumentation, Automation, control & electrical engineer with 3 years experience

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

Master of Geology, experience from african countries: Projecting, execution and interpretation of prospecting and exploration for branch "Economic Geology" (heavy minerals and gold, placers and hard rocks, greenstone belts terrains/shared rocks).

Having 4 year exp. in automotive sector.

IT PROJECT MANAGEMENT

Well versed with ISO-9001:2000, ISO/TS-16949:2002 QMS, MS-OFFICE

Mining engineer, master in HSE, no experience.

Geology and hydrogeology

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out