Resume - Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax...

Misco Jobs

Resume #80736

CONTACT INFORMATION:
View contact information...

SPECIALIZATION:
------------
Process Engineering; Glycol Dehydration, Produced Water Treatment
Product Development; Solid/Liquid/Gas Separation Equipment
------------

OBJECTIVE:
------------
A position that will provide daily challenge in an environment which sponsors creativity and maintains accountability.
------------

WORK EXPERIENCE:
------------
RECENT EXPERIENCE
2006 to 2008: DPS-Delta, LLC New Iberia, LA
Sr. Process Engineer

Process Engineering, Glycol Dehydration
Khalda Petroleum Company (KPC) Salam Gas Train 3 and Train 4 TEG Gas Dehydration Unit (GDU).
Two (2) 120 MMSCFD GDUs operating at 1,000 psig drying to 2 lbmH2O/MMSCF
* Process Design, PFD-P&ID generation through preparation of Equipment and Instrument Data Sheets.
* Operator Training of 27 Egyptian engineers. This was a 24 hour classroom training course covering theory, design, startup, operation, shutdown, maintenance and troubleshooting issues relating SGT3/4.
* Commissioning and Start-up Lead for the Khalda Petroleum Company (KPC) Salam Gas Train 3. Train 4 was subsequently started by site personnel following the methodologies detailed during my Train 3 visit.

Republic of Iraq North Oil Company (NOC) Khurmala Dome TEG Gas Dehydration Unit (GDU).
One (1) 115 MMSCFD GDUs operating at 370 psig drying to 2 lbmH2O/MMSCF
* Operator Training of 4 Senior Iraqi engineers. This was a 24 hour classroom training course covering theory, design, startup, operation, shutdown, maintenance and troubleshooting issues relating GDU.

Nexus/Ramboll Generic I FPSO Gas Dehydration Unit (GDU). Drying 55 MMSCFD to 1.5 lbmH2O/MMSCF
Murphy Oil/SBM-Atlantia Thunder Hawk TLP. Drying 70 MMSCFD @ 2000 psig to 2.5 lbmH2O/MMSCF
Petronas Carigali Ruby Field FPSO GDU. Drying 12 MMSCFD to 6 lbmH2O/MMSCF
ENI/AGIP OML 120 Oyo Field FPSO GDU. Drying 60 MMSCFD to 1.5 lbmH2O/MMSCF
* Process Design, PFD generation and equipment sizing. Depending on the scope of the specific project or as requested by client performed detailed engineering calculations or advised on specific issues.
* In all cases above, extensive use of Bryan Research and Engineering (BR&E®) process simulation software ProMax® was used to optimize unit design. The integrated equipment rating packages were used to provide preliminary equipment sizing for columns and heat exchangers.
* Developed novel HTU/NTU calculation method to provide structured packing depth calculations.
* Provided process engineering support across global business platform.
* Detailed familiarity with NORSOK, API, ASME, NACE, NORSOK and ISO specifications.

Product Development, Pitless Air Drill Separator
Weatherford International, Research and Engineering
* Under contract to develop a portable unit to capture solids and dedust 6000 scfm of air-drilling solids.
* Pending order for first article to be fabricated and deployment to Western US for field testing.

PREVIOUS EXPERIENCE

2004 to 2006: Krebs Engineers, Tucson, AZ
Project Engineer

Project Engineer, Wellhead Desanding Hydrocyclones
Otway Gas Project Thylacine Field unmanned platform, Bass Straight Offshore Victoria, Australia
* Project execution requiring compliance with strict customer specifications in a difficult application in which due to the unmanned nature of the facility, operator intervention was not an option.
Pemex Luna Field onshore facility, Tabasco, Mexico
* Detailed 1-off mechanical design of 600# Class 20" Well Head Desanding Hydrocyclone with solids.
* Assisted with installation and pre-commissioning on site.

Project Engineer, Sand Washing Hydrocyclones
Shell/Albian Sands, Muskeg River Mine Alberta, Canada Also
Suncor Energy, Millennium Mine Alberta, Canada
* Twin development projects testing the feasibility of multi-stage sand washing. In both cases large and highly instrumented pilot plants were fabricated and shipped to site for field assembly.
* Supervised installation of equipment and assisted in site management to resolve specific fit-up issues.

2003 to 2004: US Filter Zimpro, Rothschild, WI
Process/Product Engineer
Process/Product Engineer, Produced Water
* Selected by USF/Zimpro Management for relocation to Rothschild, to function as key agent of technology transfer of USF/Whittier products to Rothschild Operations team.
* Lead Process Engineer for all USFilter produced water projects. Specific product management responsibilities for all Hydrocyclone, Induced Gas Flotation and Walnut Shell Filter package projects.

1998 to 2003: USFilter Whittier, CA
Product Development Manager
Process/Product Engineer, Produced Water
* Listed as sole inventor on both process and apparatus U.S. patents for "Hydrocyclone Bundle"
See US Pat. 6800208 and US Pat. 7291268. Completed all design work using 3D design software, and substantially wrote patent text (excluding claims).
* Responsible for the evaluation of technologies for internal development, licensing or acquisition. Working with sales department, identify opportunities to improve existing equipment designs. Provide process support to customers and sales department in selecting from the broad product portfolio of USFilter. Active member of the Separations and Filtration "Technical Expert Group", part of USFilter's North American Technology Center.

EDUCATION & CERTIFICATION:
------------
Bachelor of Science, Chemical Engineering, California State University (Long Beach), 1996
Certificate in Hazardous Materials Management, University of California Irvine 1994
------------

ADDITIONAL INFORMATION:
------------
Recognized by Bryan Research and Engineering (BR&E) as being a leader in the application of their Promax process simulation software in the areas of Gas Dehydration (TEG) and Sweetening (MDEA).

I have developed Microsoft Vision "Smart" P&ID stencils which, also extensive Excel calculational data sheets which leverage data values from Promax Reports and are capable of automation linkage with Promax directly.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1871)

Go to Search Parameters...

Brief Description

MECHANICAL ENGINEER

New calédonian based Exploration and Mine Geologist, 5 years experience. Project management, core logging, mapping, strong structural geology skills. Proficient in the use of SURPAC, MAPINFO, GPS programs, Corel graphics and database programs. Available worldwide. x

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

I am Mine Surveyor with more than five years experience in the Zimbabwean mining industry. I established survey offices at Sino-Zimbabwe Cement Company and Murowa Diamonds being the first permanent employed surveyor at the Mines. I have experience in Surpac, AutoCad and Vulcan mining softwares.

Previously employed to Rusal (Guyana) as a Planning Manager

Production with safety

Mine Planning Superintendent

I am a results oriented Mining Engineer with nine years of mining in Africa. I am currently residing in USA and do have a valid work permit to work for any employer. I hold a Mining Engineering Degree and I graduated from college in 1993. I have risen through the ranks to become Production Manager.

Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax process simulation, Gas Dehydration, Water Treatment (both produced water and seawater injection), hydrocyclone, flotation and filtration technologies. Comfortable from the Pre-FEED level down to the nuts & bolts.

Being an AutoCAD Drafter/Technician, I have had tremendous experience (10 years) in the Building Construction as well as Mining industries.

Professional Mining Engineer (CEng MIMMM) searching for senior level position in a open pit mining project in FSU

Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey

Mechanical Designer using Catia -UG-Pro-E

B.Tech Mining Engg.

M.B.A. and Licensed Professional Mining Engineer with record of success in operations and engineering management. Creative problem solver with ability to develop real economic profits, lead during change management and create business strategies.

Graduate Mining Engineer that speaks Spanish, English, German and French willing to work in the mining industry.

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

Geophysicist

Junior Mine-Geotechnical Engineer, Rock Mechanics & Application, Explosives & Blasting, Numerical Analysis relate to Mine/Geotechnical project

Materials/Ceramic/Metallurgical Engineer/Materials Scientist; Skills: Materials Characterization, Metallography, Microfabrication, Ceramics, Titanium & Titanium dioxide, Superalloys, Mechanical Testing; Qualifications: MS and BS in Materials Science Engineering

To obtain employment in a mining environment so that my past skills and work experience as a Geological Tech can further grow and be challenged.

Computer ?Automation & Controls Engineer

To secure a position within a company with longevity and growth potential, while enabling me to utilize my practical skills and experience

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

Bilingual Mechanical Engineer with 22 years experience in planning, management and maintenance.

Highly motivated, graduating June 2003 from a Mineral Processing Engineering program, University of Toronto, worked in the Nickel and copper concentrator and semelter, familiar with diamond processing, proficient in Microsoft PowerPoint, excel, word. Hard working, bilingual and willing to relocate.

I have mining experience as an engineer and as a miner, in both domestic and international environments. I hope to establish roots writing a mining company starting with a junior engineer's positions.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

A highly experienced and motivated mine surveyor. Specified mine surveying and mine modeling.

Finishing my MS degree in Geology and looking for a career. I am willing to travel and/or relocate. I am able to work in the US, Europe, and Canada, although I could move anywhere.

Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D

Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

I am open pit mining technician with experience in drill and blast, load and haul and pit services. I have worked for both precious metal (gold) and base metal operation(chrome) in senior positions.

Operations manager with 30 years experience in the mining industry.

Project Manager / Engineer, Private & Public Sector Experienced

Free! I am a production geologist with over 15 years experience across a wide range of commodities including base metals, copper and gold in both open cut and underground environments.

Having a long-lasting interest in mineralogy, I am willing to find a job that will allow me to use and expand my knowledge and analytical skills in the field of mineral exploration.

Graduate Research Assistant, University of Nevada, Reno (Jan 2004-present)

I am Mining Engineer specialised in Driilling & Blasting

Drilling engineer - diamond core drilling

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

To carve a niche for myself in the organization I work for, and prove my abilities, in terms of strong work ethics, to give an advantage to the organization and as extra edge to my career.

I am a professionally registered mining engineer with 13 years experience in the mining industry. My strengths are leading miners and engineers, developing and executing mining and construction plans, excellent presentation skills, and the ability to make decisions under pressure.

Designer,Planner,Production/Engineering mainternance personeel,Commercial Engineer

Certificate III and IV Mining Exploration/Geoscience + 2 years experience

Worked in all phases of the industrial plants. In commisioning, start up and debotlenecking. As a process engineer, with experiencie in process, production, facilities and process control systems. Supervised group of 12 people, implement ISO 9000/1400, Osha 18000, economic evaluations and management

Have a progressive and responsible working experience of eight (8) years dedicated in field of piping engineering, design and drafting. Directly involved in a variety of oil & gas, petrochemical, refinery, and mining projects which starts from Estimation, Front End Engineering Design (FEED),

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out