Resume - In response to this, please consider my PROJECT BASED resume for Instrumentation...

Misco Jobs

Resume #81509

CONTACT INFORMATION:
View contact information...

I have over 18 years in the oil and gas industry. Many of the on the job skills have been obtained through large and small capital projects with the importance of timely and orderly completion.

Over 15 years in Engineering Design including specification of:

* Field Instrumentation
* Process Measurement Technology
* Pressure / Flow / Temperature / Level / Others
* Control valves / On-Off valves / ESD valves
* Analyzers Sampling and Conditioning Systems / Analyzer Shelter / Building
* Installation details / Winterization / Drafting and CADD Standards
* Wiring and Loops
* Instrument & Controls Construction Turnover inc. Pre-Commissioning and Commissioning

PROFESSIONAL MEMBERSHIPS AND AFFILIATIONS

* Alberta Society of Engineering Technologists (Since 1991 – Current Membership)
* Woolsey Instrumentation & Design Ltd. (Contract Designer / Technologist)

EDUCATION

1987 Industrial Instrumentation Technology - S.I.A.S.T., Moose Jaw, SK.
1994 – 1992 A-B Rockwell PLC-5 Applications I, II, III & IV - S.A.I.T., Calgary, AB.
1994 Electrical Code and Applied Theory - S.A.I.T., Calgary, AB.
1996 - 1995 Distributed Control Systems I & II - S.A.I.T., Calgary, AB.
2001 E125 Process Analyzer & Sample Handling System Design – ISA, Edmonton, AB.
2004 - 2005 Foundation Fieldbus Certification INST 110/115/117 – S.A.I.T., Calgary, AB.
2007 SIL (Safety Integrity Level) Determination Leadership Workshop, ACM, Calgary, AB.

FIELDS OF EXPERTISE

* Ensure that installations meet service conditions and calibration procedures are followed, adhering to safety and quality (ISO compliant). Install, calibrate and document field instrumentation for oil, gas and mining facilities.

* Initiate Instrument Data Sheets (Primary Element Sizing - Flowel, Final Control Element Sizing - Fisher's FirstVue), Bill of Materials, Scope of Work, Instrumentation Drawing Schedule, P&ID and Instrument Index (Intergraph INtools and MS Access) preparation in accordance with project procedures. Process analyzer implementation including sample handling systems, conditioning and sheltering.

* Prepare loop wiring, PLC I/O schematics and interconnecting network topology to the client's desired Control System Architecture.

* Technical review (Including Safety Instrumentation Analysis as per ISA's S84 Standard) and instrumentation design of P&ID's with logic/control narratives for establishing safe operating procedures.

PROJECT WORK HISTORY:

November 23/2007 to February 20/2009
Suncor Sustaining Projects Group- Suncor Oil Sands and Firebag Facilities
WorleyParsons MEG - Engineering Consulting - Calgary, AB

* Lead instrument and controls engineer for Plant Sustaining projects within Suncor's Oil Sands Base Plant, Millenium Plant, and Firebag Stage 1 (Plant 91) & Stage 2 (Plant 92) facilities.

* Developed Fire Alarm Systems Criteria for Plant 21 Oil Sands South Tank Farm VRU addition utilizing existing Honeywell XLS-1000 FAP integration complete with new deluge detection.

* Developed small capital projects utilizing Delta V Foundation Fieldbus (FF) control system architectures (segment verification) for Firebag Plant 91/92 Vapor Recovery Units, Honeywell TDC 3000 control system architectures for Oil Sands Base Plant 21 Vapor Recovery Unit, Triconex Safety System Architectures within Suncor's Base Plant and Plant 92, and migration of Delta V SIS Logic Solver architectures within Plant 91 Fieldbus carrier backbones.

* Assisted in the Plant 5 Gas Oil Coker overhead and main tower expansion modifications 2007 Base Plant turnaround, field engineer responsible for turning over instrumentation and controls to Suncor client.

October 1/2006 to November 23/2007
Vankor Oilfield Development - Pumping Station and Associated Equipment Projects
VECO Canada Ltd. - Engineering Consulting - Calgary, AB

* Instrument and controls engineer, assisted in developing Engineering Design Specification (EDS) for Russian oil pipeline.

* Assisted in developing Smart Plant InTools Data Sheets and Foundation Fieldbus architectures at EDS stage of project.

November 11/2005 to October 1/2006
Inter Pipeline Fund - Bow River Pipeline & Cold Lake Pipeline Expansion Projects
VECO Canada Ltd. - Engineering Consulting - Calgary, AB

* Instrument and controls engineer, specified instrument commodities and controls equipment (AB PLC-5 and Modicon Quantum Architectures). Lead designer for installation details and PLC I/O drawings.

* Lead Design and Controls Technician for AB PLC-5 RSLogix programming and field implementation for Phase 1 Wolf Lake site (2 x 800 HP Mainline Pumps).

* Lead Designer for Wolf Lake Station's 1 x 300 HP Boosters, 285 m3/hr capacity PD custody transfer meter, La Corey Station's 3 x 1500 HP C5+ condensate mainline pumps and 1 x 350 HP Booster pump.

July 25/2005 to November 4/2005
Saudi Aramco – Shaybah Gas Oil Separation Project
SNC-Lavalin Inc. - Engineering Consulting - Calgary, AB (FEED Portion Only)

* Senior instrument engineer, developing Fieldbus and ESD architectures within P&ID (Instrumentation only) development for FEED (Front End Engineering Design) portion only of max. 750000 BPD GOSP facility. Use of InTools software for establishing FF/conventional I/O and Data Sheet development for FEED portion only.

June 9/2004 to July 1/2005
National Iranian Gas Company - Tabnak Train II Inlet Gas Sep & De-Hydration Project
Kvaerner Process Systems Canada - Engineering Consulting - Calgary, AB (Supply Contract Only)

* Senior instrument engineer, design and selection (competitive bid) of instrument commodities including sizing Flow Elements (InstraCalc), PSV's (Farris's SizeMaster) and Control Valves.

* Design of Instrument Installation Details, specification and instrument technical notes preparation prior to purchasing instrument commodities.

March 12/2004 to June 8/2004
PetroCanada Edmonton Diesel Desulphurization Project
Bantrel Co. - Engineering Consulting - Calgary, AB

* Placing instrument components in the 3-D Rebis generated model and preliminary detailed design of installation details.

December 15/2003 to March 11/2004
CNRL Horizon Oil Sands Project
Bantrel Co. - Engineering Consulting - Calgary, AB

* Engineering Design Specification (InTools Data Entry, Fire & Gas, Installation Details and P&ID Development) for Unit 41 NHT, Unit 42 DHT and Unit 43 GOHT.

July 9/2002 to December 15/2003
Suncor Millennium Vacuum and Coker Unit, Plant 57 and 52 Units
Bantrel Co. - Engineering Consulting - Calgary, AB

* QC/design/selection of instrumentation field commodities for Suncor Millennium Vacuum Unit.

January 21/2002 to July 5/2002
Shell Athabasca Oil Sands Project, Shell Scottford Refinery, Ft. Sask., AB
Athabasca Construction Joint Venture [ACJV] - Site Engineering Work Site

* Instrumentation Field Engineer responsible for 261 Tank Farm, 285 Interconnecting Pipe Rack, Rail Car Loading/Unloading and Acid Gas Flare/Vapor Combustion Unit.

* Duties included inspection of process installation of instruments and electrical terminations, answer technical queries with respect to E/I instrumentation, witness continuity and function checks on instrumentation, document deficiencies and non conformances with respect to instrumentation and perform final inspection on mechanical/electrical installations prior to turnover to the owner.

March 12/2001 to January 18/2002
Shell Athabasca Oil Sands Project
Bantrel Co. - Engineering Consulting- Calgary, AB

* QC/design/selection of instrumentation field commodities and QC of loop wiring (Foxboro I/A) for Shell AOSDP COGEN /Water Treatment/Tank Farm including installation details associated with field instrumentation.

July 11/2001 to August 30/2001
Ultramar Golden Eagle Refinery, Bechtel Martinez, CA (Various Bay Area Refinery Projects)
Bechtel - Engineering Consulting – California Office

* QC/design/selection of instrumentation field commodities for Bechtel Martinez, CA Ultramar Golden Eagle Refinery (existing plant) H2 Compressor K.O. Pot Upgrade (500 gallon slug) and install details for Crude NOX Furnace Project.

January 16/2001 to March9/2001
NOVA Chemicals Plant – Poly Flare Project
Bantrel Co. - Engineering Consulting- Calgary, AB

* Instrumentation QC/design/selection of instrumentation field commodities and field wiring for Nova Chemicals Joffre Site (existing plant), Poly Flare Upgrade.

October 30/2000 to January 5/2001
Anadarko Canada Corporation's Jean Marie Well Sites Project
Equinox Engineering - Engineering Consulting - Calgary, AB

* Design/selection of instrumentation field commodities for Anadarko Canada Corp.'s Jean Marie Well Sites (1.5 MMSCFD per 9 well average).

October 30/2000 to January 5/2001
Purcell Energy Ltd.'s Ft. Liard F-25A Well Site Project
Equinox Engineering - Engineering Consulting - Calgary, AB

* Design/selection of instrumentation field commodities for Purcell Energy Ltd.'s Ft. Liard F-25A Well Site (15 MMSCFD for 30 MMSCFD future for single gusher well). Assisted in writing logic and control narratives for Purcell Energy's F-25A well site, Anadarko's Jean Marie well site.
June 12/2000 to October 26/2000
Mobil Oil's Carson Creek Gas Production Revamp Project
Optima/Ramco - Engineering Consulting - Calgary, AB

* Design/Selection and sizing of Foundation Fieldbus (Delta V) related instruments for Mobil Carson Creek Gas Production Facilities (existing plant) inlet expansion of 500,000 m3/day.

June 14/1999 to June 2/2000
Nova E3 Projects, Joffre 2000 Project, Joffre, AB
Fluor Construction – Site Engineering

* Instrumentation Field Engineer responsible for E3 Ethylene Furnace Feed (7 Cracking Furnaces capable of producing 150,000 lbs/hr of SHHP steam), Utilities (1500 ANSI BFW Electric and Steam Pumps) and Flare areas.

* Duties included inspection of process installation of instruments, answer technical queries with respect to instrumentation, document deficiencies and non conformances with respect to instrumentation and perform final inspection on mechanical/electrical installations prior to turnover to the owner.

Feb 23/1998 to May 28/1999
Nova Offsites Project, Joffre 2000 Project
Bantrel Co. - Engineering Consulting- Calgary, AB

* Instrumentation Area Lead Designer responsible for the selection of instrumentation commodities based on price, quality and functionality. Duties included the IFD/IFC instrumentation mark-up of P&ID's for C3/C4/AC/PFO Rail Car Loading, SM / FC / TEA Unloading and Co-Product Storage for Nova/Amoco offsites.

July 29/1996 to November 28/1997
Novacor Joffre Petrochemical Plant Site, Joffre, AB
Behalf of Novacor - Joffre Plant Site Engineering

* Instrumentation Designer responsible for the design of small capital projects, existing pipeline, existing ethylene trains 1 and 2, and existing polyethylene plant.

January 2/1996 to May 7/1996
Fording Coal's Coal Mountain Upgrade Project, Sparwood, B.C.
Kilborn Engineering – Coal Mountain Site Engineering

* Instrumentation Engineering Technician assisting E/I supervisor during construction and pre-commissioning.

January 2/1996 to May 7/1996
Fording Coal's Coal Mountain Upgrade Project
Kilborn Engineering – Engineering Consulting - Calgary, AB

* Design of Instrumentation Panel Layouts (Additive panels and Marshalling Racks), Loop Wiring (Yokogawa DCS) and specification of instrumentation commodities. Able to participate in the successful production of metallurgical and thermal coal to this revamp.

January 17/1995 to December 15/1995
Du Pont's Hydrogen Peroxide Upgrade Project (Ft. Saskatchewan, AB)
Fluor Daniel - Engineering Consulting- Calgary, AB

* Assist design of Electrical/Instrumentation layouts, Loop Wiring (Interconnecting wiring from J.B. to Marshalling Rack for Fisher Provox DCS). Assist design/CADD of ESD Shutdown Systems (Hard Wired), estimation of material, wire and cable, raceway systems (tray cable) for Electrical/Instrumentation and Material Take-Off's for Du Pont's Hydrogen Peroxide Facility.

June 20/1994 to January 15/1995
Novacor Joffre Petrochemical Plant Site, Joffre, AB
Behalf of Novacor - Joffre Plant Site Engineering

* Completed E/I design packages from front end/estimation to detailed scope of work, and provided programming documentation for DCS (TDC 3000) and PLC (A-B PLC-5). Vendor reviews of pelletizing equipment and machine monitoring (Bently Nevada).

April 11/1994 to June 18/1994
PanCanadian Field SCADA Project
Kenonics - Engineering Consulting - Calgary, AB

* Assist design/drafting (AutoCAD R.12) of Electrical/Instrumentation for Speed Pick-up modifications to Deep Gas Compressor Stations, RTU Layout, I/O cabinet and RTU (Fisher ROC) panel wiring.

June 4/1993 to April 8/1994
Mobil Oil Limited Head Office
Behalf of Mobil Oil - Engineering Consulting - Calgary, AB

* Assist design/drafting of Motor Control wiring, MCC layout, 120V/Lighting layouts and P&ID's/PFD's for gas and oil gathering sites.

May 6/1991 to December 9/1992
Shell Caroline Gas Gathering/Sulfur Forming Project
SNC-Lavalin - Engineering Consulting - Calgary, AB

* Assist design and drafted (AutoCAD R.11) Location Plans, Installation Details and Loop Wiring (Modicon PLC's).

January 2/1990 to April 19/1991
Lloydminster Heavy Oil Upgrader Project
Kilborn Engineering – Engineering Consulting - Saskatoon, SK

* Instrumentation design of Instrument Location Plans, Installation Details and Loop Wiring (Foxboro I/A).

July 15/1987 to December 22/1989
Consumer's Co-operative Refinery, Regina, SK
Consumer's Co-op Employee - Plant Site Operations

* Operations Technician for the Saturated Gas Plant, Distillate Unifiner, Light Naphtha Unifiner, Penex, Delayed Coking, Gas Concentration (cooling water), Polymerization and Sulfur Recovery units. Instrument technician during instrumentation re-vamps of the old Crude and Cracking units with changeover to new Taylor DCS from old pneumatic control.

COMPANY / VENDOR SPONSORED EDUCATION:

2009 H2S Alive & First Aid Level C CPR – Flatline Response Inc., Calgary, AB.
2007 InTools Ver. 7.0 (Advanced – Smart Loop / Fieldbus / Intrinsically Safe Circuit
Design ) – Intergraph, Calgary, AB.
2005 WHIMIS – Kvaerner Process Systems, Calgary, AB.
2002 AutoCAD 2002 Update – ASCENT, Calgary, AB.
2001 Fundamentals of Process Gas Chromatography – Spartan, Edmonton, AB.
FieldVue Digital Instr and 275 Handheld Comm.– Spartan, Edmonton, AB.
1998 A-B ControlNet and RSLogix Day Course - Westburne Electric, Calgary, AB.
Modicon Concept and Quantum Day Course - Guillivan Electric, Calgary, AB.
1995 Fundamentals of MicroStation 95 and IDM - Nova Chemicals, Plant Site (Joffre)
Fundamentals of Compressor Shutdown Systems - Spartan, Calgary, AB.
Loop Tuning/Commissioning Course - A.S.E.T., Calgary, AB.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 1870)

Go to Search Parameters...

Brief Description

A grade electrical licence. Underground communications. Tamrock drill equipment service and fault finding, Flygt pump repairs and maintenance. Ability to read and draw schematics/wiring diagrams. HV switching. Primary/secondary ventilation. Commercial electrical installations. Duty desination.

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

I am a mine engineer.

Computer Technician

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Mechanical Engineering Graduate EIT - experience at underground mine sites, maintenance planning, drafting in autodesk inventor, physical asset management, underground mine hoist ropes and lubrication, scheduling

Instrumentation and Control Engineer

Electrical Engineering, Energy Systems, Power electronics

I am Diploma in Mechanical Engineering. I have adequate knowledge in Auto-Cad in mechanical engineering field. I also have confident experience in X-Steel & SDS2 in steel structure back ground.

Graduate Electrical with Power Electronics

Experienced Reliability Engineer seeks overseas rotational position (i.e. 28/28)

Prevent / correct unsafe acts & condition.

A Mechanical Engineering graduate from NIT/KREC SURATKAL INDIA with over 19 years of experience in mining sector with over 7 years as Head of Maintenance operation in underground as well as open pit mine.Presently working as SBU head with responsibilities including planning,procurement,budget prep.

An enthusiastic professional with proven ability in software development, from inception to sign off. Excellent software development and technical skills, with experience in PHP, MySql, Access, ASP, ASP.NET, VB6, VB.NET, Microsoft SQL Server, Seagate Crystal Reports and other development tools.

Graduate Engineer looking for work in mining or mineral processing industries.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

Area lead designer, PDS ,Microstation, AutoCad, Smartplant review, Peligan Forge Support moduler.

Seeking Chemist, Laboratory, or Quality Control Position

Manager / Engineer ( HW/SW/QA/Training )

Experience with Electrical and Instrumentation & Control Systems design which encompasses project estimating, equipment purchasing, design, build, programming, installation, start-up (commissioning) and field service/troubleshooting for the following: AC motor controls, MCC’s, VFD’s, MOV’s, AOV’s,

Sr.Document Controller

Marine + International Projects Oil & Gas

PE in Mining, Environmental & Civil Engineering with 26+ years experience in surface coal mining management, engineering & environmental. I've held positions up to and including Vice-President of Operations. Well experienced in open pit dragline & truck/shovel operations. Well organized.

I am a Technical Design Engineering of 23 years, I work in a manufacturing company of my country. I am interesed in 3D cad modeling, drafting and simulation/animation product base on CAD/CAM/CAE system (AutoCAD, MecDesk, Solidworks, Catia, Unigraphic, Pro/E, Mastercam, Mold flow, Xsteel, etc)

Managing, organising and participating in geological field studies, drilling and geological testing programAnalysing geological, geochemical and geophysical survey data, well logs and other test results, maps, notes and cross sections, core samples, drill cuttings and rock samples

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Surgical Emergencies :- Road Traffic accident, crush injuries, blunt trauma abdomen,Head injury, liver tear, gunshot, spleen rupture, face injuries, stab injuries, spinal cord compression, assult injuries, burn injuries etc.n Medical Emergencies :Myocardial Infraction, COPD, sun stroke, snake etc.

Corporate Executive in Information Technology with extensive international experience in Systems/Product Architecture (Analysis & Design), Program/Project Management, Business Continuity Disaster/Recovery Planning, Technical Service Delivery & Support, Technical/Operations Management

Troublshooter, computer and networking, electronics, technicial

Drilling and blasting Engineer-

Have exstensive experience, training, and knowledge as an underground coal mine Maintenance Foreman/Electrician in longwall and continuous miner sections. Have excellent electrical, mechanical and hydraulic skills along with welding,cutting, and fabrication skills.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

A seasoned engineering management professional with 11 years experience in petrochemicals, refinery, oil and gas industry in the field of reliability engineering and modeling, pinch technology and heat integration, consequence analysis, utilities modeling, energy efficiency studies , process simuln

Diesel mechanic/ Fitter 20 years mining experience

Computer literate; proficiency in MS office, Excel, Power Point

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Provide technical expertise, guidance and leadership for a variety of designated engineering projects at site.

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

I have a good experience in Plant Modelling using PDMS and knowledge about Pressure Parts & piping Stress Analysis.By majoring in PDMS, I have been exposed to ADMIN, DESIGN, PARAGON, SPECON, DRAFT AND ISODRAFT Modules. And, Iam also involved in creating 4D simulation and presenting of pro

CAD/CAM engineering

I have Excellent technical, communication and interpersonal skills with very good troubleshooting and problem solving skills and ability to work on multiple tasks in a fast paced environment independently and in a team. I can strive to make things work more efficiently and effectively .

Instrument Engineer (Construction) , Site Engineer (Instrumentation), Field Construction Engineer (Instrumentation), 05+ Years Exp., Engineerind Degree in Electronics & Instrumentation

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

I am Electronics and Communication graduate and presently working in Saudi Arabia

Have sound understanding in Geology. Graduate in Geology. Doing Post Graduation(final year) in Geology. Done field work.Computer-friendly.

Mining engineer with strong engineering base, team worker, comunicative, capable for individual work and research. Ready to work on a chalenging jobs, high level of computer litteracy. BSc diploma for mining engineer (5 year studies), currently on post graduate studies of mining.

Experienced Design Engineer

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out