CONTACT INFORMATION:
View contact information...
Objective
Seeking a Project/Civil/Structural Engineering position where I can utilize my knowledge and skills.
Highlights
* +14 years of detailed Engineering, project management consultancy (PMC/PMT), construction,, Oil&gas and mining
* Experience in oil/gas project related structures such as pipe racks, equipment, vessel, and stack foundations.
* Extensive experience in structural analysis and design for steel and concrete
* Solid background in structural dynamics, and computing for structural engineering
* Solid computer skills: S-Frame, SAP 2000, ETABS, STAAD III, STAAD PRO, DYNA5 RISA 3D, DRAIN RC, DRAIN 2DX and MS Office
* Competent in the use of American and Canadian codes, for both concrete and steel
* Field experience during construction and pre-commissioning support
* Excellent interpersonal skills with the discipline team and with other disciplines
Education
Ph.D.: Structural Engineering, University of Ottawa, Ottawa, Canada, 2005.
M. Sc.: Structural Engineering, Technical University of Lodz, Lodz, Poland, 1995
B.Sc. Civil Engineering, Gariounis University, Benghazi, Libya, 1990
Professional Experience
Worley Parsons, Al khobar, Saudi (April 2008-Present)
Lead Structural Engineer (PMC)
1 Review and comments on engineering packages including Civil/Structural drawings and calculations prepared by different EPCs based on relevant industry international standards and specifications to the project.
2 Review specifications and standards
3 Provid on-site consultation
4 Design pipe racks, Mat foundation pipe sleeper and bridge culvert
Worley Parsons, Calgary, Alberta (Jan 2007-April 2008)
Structural Engineer
1 Review the purchase orders with the objective to reduce the cost of the project for Shell Albian Sands project Ex. 2&3
2 Review and update client specifications and technical standard for Shell Albian Sands project Ex. 2&3
3 Involved in engineering design study and detail design for Suncor Energy Fire Bag project, Fort McMurray, AB, Canada. Total cost of the project was Can $ 450 Million.
4 Coordination with other engineering disciplines within the company, clients, and vendors
5 Designed concrete foundation on piles and soil for vertical and horizontal vessel, compressor and pipe rack
6 Designed Ring Foundation
7 Designed piles capacity
8 Checked design calculations done by other Engineers
9 Design pump foundations for dynamic loads
10 Design heater skid for dynamic loads
Fluor Canada, Calgary, Alberta, (Apr 2006- Jan. 2007)
Structural Engineer
1 Carried out Engineering Design Study and detail engineering design for HUTGU project, Irving oil Ltd. Saint John, NB, Canada. Total cost of the project was Can $ 250 Million.
2 Involved in Engineering Design Study for FGO project, Irving Oil Ltd. Saint John, NB, Canada
3 Analyzed and designed main module pipe rack to support pipes, equipments like exchangers, air coolers, reactors, drums etc.
4 Designed concrete and steel foundations on piles and soil for vertical and horizontal vessel, compressor and pipe rack for static and dynamic loadings
5 Carried out structural design for steel pipe rack structures, including seismic and wind load design.
6 Involved in retrofitting of existing structures for additional service, seismic and wind loads
7 Checking design calculations done by other Engineers
8 Supervision guidance and mentoring of junior and intermediate Engineers
Engineering Consultant, Ottawa, Ontario (Sep 2004 –Feb 2006)
Structural Engineer
1 Modeling and analysis of test specimens, as well as the verification of the procedure employed.
2 Modeling and analysis of large scale beams and girder retrofitted by CFRP
3 Design reinforced concrete structures to resist blast loading
4 Upgrade an existing structure to resist blast loading
5 Retrofitting, modeling and analysis of existing reinforced concrete structures under different levels of explosion and locations.
University of Ottawa, Ottawa, Ontario, (Sep 2002- Dec 2005)
Structural Engineer, Department of Civil and Environmental Engineering
1 Design R /C Structures according to new and old codes
2 Retrofitting, modeling and analysis of existing reinforced concrete structures under static non-linear Pushover analysis
3 Retrofitting, modeling and analysis of existing reinforced concrete structures under Dynamic non-linear time history analysis
4 Upgrade existing buildings to satisfy modern seismic design code requirement (NBCC 2005)
Brown and Root Inc, GMMR, (EPC), Bengazi, Libya, (Mar 1996-Feb 2001)
Structural Engineer
5 Administrated project cost analysis and expense estimation studies
6 Carried out design of steel pipe racks and pump foundation
7 Carried out structural design of different residential buildings.
8 Reviewed specifications, prepared technical reports
9 Review structural fabrication drawings
10 Provided on-site consultation
11 Designed retaining wall structures
El-Oroba Company, Derna, Libya, (Sep 1990-Sep1993)
Project Engineer
1 Project cost analysis and estimation.
2 Followed and inspected the construction progress of the project ensuring conformance with design specifications, codes and standards.
3 Confirm design changes, material and ensuring that costs do not exceed appropriated amount
4 Develop cost estimates for engineering, labor and materials based on analysis of preliminary design data.
5 Plan, schedule and provide work direction as required for preparation designs.
6 Supervised on-site constructions.
7 Designed multi-storey reinforced concrete buildings with area of approximately 250 m2 for each storey.
8 Design only two single storey reinforced concrete commercial buildings with area of approximately 450 m2.
9 Design of steel structural industrial buildings.
Affiliations
1 Registered Professional Engineer in Ontario.
2 Registered Professional Engineer in Alberta.
Presentation
1 Earthquake Loads According to NBCC 2005, Jan. 2008, Colt engineering, Calgary, Canada.
2 Comparison between a) Equivalent static Loads and b) Wind Loads, Jan. 2008, Colt engineering, Calgary, Canada.
3 Comparison between a) Equivalent static Loads and b) Dynamic Loads, Jan. 2008, Colt engineering, Calgary, Canada.
4 Different Methods to calculate the period of Structures, Jan. 2008, Colt engineering, Calgary, Canada.
5 Dynamic analysis of foundation, October 2007, Colt engineering, Calgary, Canada.
6 Loads on Structures, June 2007, Colt engineering, Calgary, Canada.
Publication
1) F. Shalouf and Syed Ahmad, Behavior of Reinforced Concrete Structures Under Blast Loads2008 Civil Engineering Roundtable Meeting, CSD, Aramco, Saudi, November 1st 2008
2) Syed Ahmad and F. Shalouf, Retrofitting Beam in Reinforced Concrete Piperack 2008 Civil Engineering Roundtable Meeting, CSD, Aramco, Saudi, November 1st 2008
3) F. Shalouf and Syed Ahmad, upgrade Steel Structural to Satisfy Latest Code, CSCE 2007 Annual General Meeting & Conference, Yellowknife, Northwest Territories, Canada, and June 6-9, 2007.
4) F. Shalouf, SI Ahmad and MS Cheung, Response of the reinforced Concrete Structures to Blast Loading Originally designed according NBCC 2005 Seismic Loading, International Symposium on Integrated Life-cycle Design & Management of Infrastructures, shanghai, China, May 16-18, 2007.
5) Fathalla Shalouf and Syed Ahmed, Blast Loading and Earthquake Effect on Reinforced Concrete Structures, Third International Conference on Bridge Maintenance, Safety and Management, IABMAS'06, Porto, Portugal, July 16-19, 2006.
6) Fathalla Shalouf and Syed Ahmed, Retrofitting of Bridge's Girders, the 7th International Conference on Short and Medium Span Bridges, Montreal, Canada, June 14-16 2006
7) Fathalla Shalouf and Luca Martinelli, Analytical Study of Deficient Reinforced Concrete Beam, Structural Faults & Repair, Edinburgh, England June 13-15, 2006
8) F. Shalouf, Retrofitting of Reinforced Concrete Structures against Blast Loads, 1st International Structural Specialty Conference Calgary, Alberta, Canada, May 23-26, 2006.
9) F. Shalouf and M. Saatcioglu, Retrofitting of Non-ductile Concrete Frames against Earthquake through Diagonal Prestressing, 1st International Structural Specialty Conference Calgary, Alberta, Canada, May 23-26, 2006.
10) Fathalla shalouf and Murat Saatcioglu, Seismic Retrofit of Non-Ductile Reinforced Concrete Frames with Diagonal Prestressing, 100th Anniversary Earthquake Conference, Moscone Convention Center, San Francisco, CA, April 18 - 22, 2006,
Training
1 Project Management workshop, September 2007, Colt engineering, Calgary, Canada.
2 Structural design of industrial facility, April 2007, EPIC, Calgary, Canada.
3 Sap 2000, October 2002, University of Ottawa, Ottawa, Canada
4 Earthquake loads, July 2006, Fluor Canada, Calgary, Canada.
Languages
Arabic and Polish
Citizenship: Canadian
View contact information... |