Resume - HR driver licence [Austr], Austr QF cert 3, Austr ESI cert 3, International swit...

Misco Jobs

Resume #83549

CONTACT INFORMATION:
View contact information...

An international apprenticed electrician awaiting Australian qualifications recognition. Worked as amaintenance electrician for over 8 years overseas [motor control wiring, installations and repairs, switching authorisaation upto 88kv, maintenance of OCBs Vaccuum CBs, SF6 CBs transformers maint

CAN DOs installation, upgrades, repairs and testing of overhead service cables [polarity, NST, Metrel, voltage, continuity, impedance testing]
Installation, fault repairs, replacements of pole- and ground- mounted transformers including relays and surge arrestors. Hold international Switching Authorisation upto 88kv
Installations, maintenance and repairs to pole top switches [air-breaks], isolators, Automatic Circuit Reclosers [ACRs],transformer expulsion drop-out [EDO] fuses and links [d-fuses/links], OCBs, Vaccuum CBs, SF6 CBs, change-over switchines etc. Transformer relay testing. Work on EWP or ladder, Have heavy rigid licence, can do paper work, plan and schedule work [including basic circuit designing on computer using AutoCAD, input data into PC [PDA].
------------
OBJECTIVE:
------------
Worked as an elctrician then promoted to senior technician overseas but have manly done electrical linesman work in Australia [Victoria, now in WA].I am now looking for the challenge and calculations and diversity that an electrician is exposed to. Willing to work overtime, shift work.
EXPECTATIONS a wage higher than i am getting now. A rate of at least $40/ hr, a company car and mobile fon and good leave loading, assistance with visa, relocation and Permanent Residency sponsorship [to include 2 dependants ie family]

WORK EXPERIENCE:
------------
Worked overseas for a power utility as a maintence electrician upto 132kv [Lines, transformers and associated switching, protection and measurand gear] for over 8 years.
Promoted to senior technician and worked nearly 4 years [an interface beteen field and office work [real cv available on request].
Worked in Victoria as an electrical linesman for nearly 3 years.
Been in Western Australia nearly 1 year still working as an electrical linesman.

EDUCATION & CERTIFICATION:
------------
Academically - Advanced Level passes in Maths, Biology and Physics
Tecnically - Certificate of Contract of Apprenticeship [as electrician]
NCC in Electrical Installations & Maintenance certificate of completion of apprenticeship in Electrical Installatios & Maintenance.
Introduction to Electrical Distribution
Distribution substation maintenance certificate
Cert 3 in ESI Distribution [powerline] Australia
EWP [Elevated Work Platform or EPV] card
CPR card [First Aid]
Pole Top Rescue
Testing procedures for Metrel, NST Testing
Victorian Certificate to receive Electrical Access Permits
Victorian line Worker Regulations
Victorian Network Passport and WA Western Power orange book.
Traffic control and Management
Western Power complete induction to work on powerlines including [commercial, industrial and domestic premices]

132kv switching certificate

Other IELTs score 6.5 overall

Recently been promoted to team leader at Transfield Services ltd in the OH service replacement project.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 1875)

Go to Search Parameters...

Brief Description

D.A.E. (Mechanical) 1970/3300 Second 1989

Exploration geologist: Geological mapping, hydrogeological modelling with modflow, sedimentary petrography and petrophysics (cathodoluminescence), drilling supervision, geotechnical investigations: SPT, CPT, seabed CPT, Vibrocore, Softwares: Arcgis, Modflow, Terrasurf, Qinsy

I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects

I wish to join a organization that can utilize my skills and training effectively that is commensurate with experience and qualifications and reward me accordingly. I am a well presented person and can take up new employment at short notice.

1991-1995 Electricity Engineering Azad University Of Kazeroon, Iran. 2002 Professional Media Production Barnet College, London. 2003 Professional Community Interpreter Workers' Educational Association London. 2004 Health and safety Weavers Trust, London.

Dynamic professional with solid 22 years of experience in the shipping business and 4 years of experience in the document management engineering field, aims to respond to new challenges and contribute effective in the shipping and engineering field.

Both geophysicist and computer enginner with good skills and experience in mining and oil & gas industry. Seeking a challenging position with growth and responsabilities.

Good knowledge Civil, Mechanical, and Electrical Work at Telecomunication Company. Also Site Acquisition work for BTS site.

Energy Industry Management Professional

Highly organized, detailed oriented and self motivated Lead Engineer having 6 years of professional experience in the field of product development/sustaining engineering

Dedicated Cost Engineering Professional with exceptional project corresponding skills, multinational work experience and extensive abilities in Cost estimation, Quantity surveying, Claim analysis, Tendering, Contract administration, Cost monitoring/reporting, Schedule monitoring, Bid management, Bud

Managed three R&D labs, namely, Failure Analysis Lab, Mechanical/Metallography Lab, and Metrology Lab

Experienced Mechanical engineer as Tunneling specialist in operation,maintenance,construction tunnels and executing projects.

I have successfully managed a business for some time and then completed an applied geology course at the Camborne School of Mines, this was essentially a practically based course that introduced and developed many aspects of geology, mining and environmental management systems.

Good analytical thinking, cross cultural communication and interpersonal skills, highly discipline, strongly motivated, dynamic personality, proven good organization and leadership skills; hard worker in any environments, experience using Dealer Business System, Asset Management Tools and microsoft

Presently working with PHILLIPS KILN SERVICES, MUMBAI as Project Engineer. it is a us-indo venture.

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

I have over 25 yrs experience in the oil and gas industry in various positions and with my technical training of 3 trades which are as follows; Licensed H.D. (diesel) mechanic, Licensed millwright, and Licensed motor mechanic I believe that I would be an asset to your organization.

Underground Blackhat Miner, EMT Miner Certification, Double-head Fletcher, Roof Bolter, Operate 488 Scoop

Mining engineer, master, underground and surface mining, feasibility studies, planning

Engineer / EMS / SCADA / Electrical / Telecom / Power Sector

Computer networking, electronics services and repairs computer maintainace communication system and intercom. Electrical power system,control systems and automation. I am holder of a Liecentiate in electrical engineering and a certificate of enginnering in electrical and electronics enginneing

Primavera P3/P5/P6 Senior Planner / Planning Manager with Expat experience in Middle east and South East Asia. I am seeking a position working along side local workforce where i can assist with local development.

A dedicated and enthusiastic Master’s graduate in Control Systems & Instrumentation with two years job experience in the industry

MS in Environmental Engineering - Geo-Resources Emphasis ( 5years )+ Diploma of Specialization in Mining Sciences and Technologies (Post-graduate Research 3 years) - Freelance experience in QUARRY PLANNING-DESIGN and ENVIRONMENTAL ASSESSMENT (2 years)

GIS Analyst/ Geoscientist...M.Sc. Geology, M.Sc. GIS, Cert. Data Processing and Info Tech

Fast learner and and succeed at everything I set out to accomplish.

To use my wealth of experience and full potential to contribute in a challenging organization.

Degree electronic engineer - 3 year expr. in industrial autoamtion - key skill PLc programming, SCADA developemnt; Robot programming; maintenance if industrial control system

QA QC Engineer, Laboratory Manager,

HR driver licence [Austr], Austr QF cert 3, Austr ESI cert 3, International switching Authorisation up to 88kv, Victorian line worker registration, WA licence for High Risk work, First Aid, Oh service testing [Metrel, NST], Safety blue card, EWP card, Internat Maint Electrician 4yr appy + 8yr exp

Mechanical-Piping Engineer - experienced in piping and procurement related activities for both offshore as well as onshore facilities

1. Mines planning engineer. 2. blasting engineer. 3. excavator incarge. 4. suppervisor. and 1. Bachellor of Engineering (Mininig Engineering). 2. Blasting Certificate.

As a Project/Contract Mgr, my background is in Construction. I have worked with Owners/Clients, Architects, & Engineers. I am experienced in continuous improvement in construction, process, & people mgmt. I'm experienced in business & project mgmt in small, large, & mega const. projects.

Good knowledge and efficient use of computer in data processing, record systems and the Internet (Microsoft Office packages, Operating Systems, Computer Maintenance and Assembling). B.Sc. Physics with Applied Geophysics (Second Class Honours, Upper Division).2005

Projects Estimation Engineer

Geospatial Analyst with over 10 years in GIS, 4 years in remote sensing, 8 years in autocad, 4 years offshore drilling, and a Geology degree.

Areas of expertise include Civil/ Mining Management, Construction Supervision, Project Management and Procurement.

Environmental project scientist with project management experience in the areas of oil and gas and dry cleaners. I have extensive Phase I and Phase II experience. I have a proven track record of being on time and within budget while working on multiple projects.

Bachelor of mechanical engineering working as rotating equipment engineer for condition monitoring and predictive maintenance using vibration analysis, ODS, alignment, lube oil analysis, Thermal imaging (Thermography), videoscope, operating parameters

Electrical engineer, Matlab, PLC, Labview

Bs. in Metallurgical Engineering, Ms. Environmental Engineering, Ms. Mining Engineering. 3 years experience in mineral processing and mining and 1 year experience in environmental auditing. I'm analytically skilled, good at working in a team, can carryout complex task with no supervision

Skills - Design, Procedures, Projects, Commissioning, Calibration, Maintenance. My qualification is Instrument/Electrical Engineering Technician. I have in Nuclear Power Plant, Chemical, Mining, oil and Gas Industry in Europe and Australia

In May 2009 I will graduate from Texas Tech University with a Masters Degree in Transportation Engineering, with 3.66 GPA. With over 1 year of experience in Commercial Project, I have developed a strong background in Planning and designing.

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services

Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.

Degree in Geological Sciences. Experience in laboratory of total and clay mineralogy analysis, sedimentology and petrography. Use of stereomicroscope and polarizing microscopy. Good knowledge of Office programs and basic AutoCAD and ArcGIS program.

Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor

Network Engineer

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out