Resume - Accomplished, Achievement-driven, Results Oriented and Passionate about realizin...

Misco Jobs

Resume #84088

CONTACT INFORMATION:
View contact information...

EDUCATION
Master of Science, Material Science and Engineering May 2009/GPA: 3.60
University of Texas at Arlington, USA

Bachelor of Technology, Metallurgical Engineering May 2004/GPA: 3.82
National Institute of Technology, Warangal, INDIA

INTERNSHIP
Visakhapatnam Steel Plant Visakhapatnam, INDIA Jan 2003 – May 2003

Departments: Speed Control of Light and Medium Merchant structural mill, Rolling mills, Sintering and Blast Furnace

-Conducted time studies on each process responsible for cracks in the final product (reinforcement bars) and identified potential bottlenecks to speed and temperature of hot rolled and cold rolled wire rods and developed methods to reduce these impediments to efficiency
-Responsible for the study of the efficiency of the pelletizing drum which decides the permeability of sinter bed thereby affecting the productivity of sinter machine, quality analysis of the raw material
-Performed gas velocity rate studies on Top blown Converting gas in the furnace - the cornerstone for removal of impurities from Molten Pig Iron in the form of Oxides
-Processed and assisted in collection of converter gas which is used as a fuel in the plant – special feature of energy conservation

INDUSTRY EXPERIENCE
Madras Aluminum Company (MALCO), a Unit of Vedanta Resources Plc Mettur Dam, INDIA

Smelter Process Engineer June 2004 – June 2006

-Supervised and Administered 24 Vertical Soderberg Aluminum Electrolytic cells and managed 22 production line workers
-Achieved daily targeted Aluminum molten metal production through electrolytic metal extraction process, Coordinated with Maintenance and Foundry personnel to achieve process objectives
-Trouble shooting activities which included regular monitoring of energy consumption, reducing the number of anode effects, maintaining electrolytic bath chemistry and Bath Temperature monitoring
-Coordinated in implementation of Electronic Pot Control (EPC), Bar Breaker and Point feeder technology for the controlled operation of the Aluminum Extraction.
-Team Member for start-up and stoppage of electrolytic cells, anode in-line baking and cathode relining process
-Coordinated with foundry department in manufacturing process of Alloy preparations, Aluminum ingots, Wire Rods and Bus Bars resulting in a savings of $0.7 million in fiscal year 2005-2006
-Synchronized with carbon plant in maintaining the Anode Quality, Reduction of Paste Leakages and Anode Spikes
-Performed extensive testing on purity of Aluminum and Alumina and ensured they were free from impurities and fines respectively
-Deployed statistical tools for reporting variances in the functioning of electrolytic cells, cost control of the production processes, labor efficiency and productivity, inventory management of raw material and metal produced and monitored safety standards
-Monitored equipment utilization and machine downtime with responsibility for the implementation of corrective and preventive actions to reduce MTBF(mean time between failures)
-Involved in six sigma project to reduce the melt loss in the cast-house and was an yellow belt
-Acted as a team member for achieving of ISO 9001, ISO 14001 and OHSAS 18001 certification and implemented in the shop floor
-Underwent training in SAP 4.7 Materials Management module and was an end user
-Received 'Best Employee of the month ' award – March 2006

Foundry Engineer: July 2006 – July2007

-Alloy melt preparation for casting into ingots and wire drawing operation as per customer requirements
-Involved in record Bus Bar production with required specifications for BALCO expansion project, another unit of Vedanta resources, INDIA
-Defect identification in final product through microstructure characterization and proper metal degassing techniques
-Implemented SPC tools for maintaining quality and meeting customer specifications for EC(electrical conductivity grade),CG(commercial grade) and LP(Low Purity)

RESEARCH EXPERIENCE
University of Texas at Arlington, USA

Research Experience Aug 2007 – current date

-Successfully improved efficiency by Omni-Directional Anti reflection Coating on commercial Amorphous Silicon Solar Cell
-Carried out computer simulations for Anti reflection Coatings on Amorphous Silicon Solar Cell and Organic Solar Cell using Rigorous Coupled Wave Analysis
-Created Angle Dependency Testing for Solar Cells using AM1.5 Solar Simulator
-Experience in single crystal silicon processing from ingot to capacitor fabrication as a part of Silicon Integrated Circuit Fabrication course work
-Proficiency in Thin Film Deposition, Sputtering, Physical Vapor deposition, Oxidation Furnace, Diffusion, Ellipsometer, Profilometer, UV-VIS Spectroscopy, Fourier Transform Infrared Spectroscopy

ACHIEVEMENTS and EXTRA-CURRICULAR ACTIVITIES

-Received Department Scholarship award during Master of Science
-Awarded special Appreciation Letter from Chief Executive Officer(MALCO) for outstanding effort during crisis period
-Team Member for the TQM project "Reduction in Pot Turn-Around Time" and achieved in record 22hrs resulting in significant savings to the tune of $ 0.25 million and was published in TMS (The Minerals, Metals and Materials Society)
-Participated as a team member for successful implementation of Just-In-Time (JIT) inventory management resulting in potential savings totaling $ 0.50 million
-Suggested and implemented an idea of keeping high melting point and thick metal sheet under the pot to avoid damage to the Bus Bar during the pot puncture
-Received Merit certificate and Merit scholarship award in Bachelor of Technology for the first year and second year
-Best paper award for presentation on 'Composite Materials and their Importance' at National Institute of Technology - Warangal, INDIA

PUBLICATIONS
-"Solution-Processed Omni-Directional Antireflection Coatings on Amorphous Silicon Solar Cells" in Journal of Applied Physics(2009)

COMPUTER SKILLS
-Platforms: Windows - all versions, Macintosh, Unix
-Office Packages: Microsoft Word, Excel and powerpoint, Microcal Origin,
-Matlab, Labview end user
-Communication Packages: Lotus Notes 6.5, IE 5.0, Mozilla Fire fox, Netscape, Microsoft

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1874)

Go to Search Parameters...

Brief Description

25+ years experience as Operations Manager in the Resources and Oil & Gas Sectors. Formal qualifications in Engineering and Business.

A competent leader with 3 years of experience within HSE Management in the upstream and downstream Oil & Gas Industry

20+ years in Control Systems Engineering/Design. Experienced Intools user.

Metallurgist and Materials engineer with 3 years of experience. Wide range of skills in metallography techniques, SEM, TEM, Stastical tools and design softwares. Good communication and presentation skills. Published papers in journals and presented work at conferences.

I seek a position that will give me an opportunity to develop project strategies that enhance efficiency through the implementation of cutting-edge technologies, efficient application designs and intelligent reporting practices.

professional seeking new challenges.

Superintentant sand and gravel mining, from start to reclamation./ Clean construction debris and recyling site experiience.

Quality assurance, reserch and development. Section - Process control in charge, shift in charge

Young geologist looking for Interesting Career

Graduate Surveyor, December 2008, Western Australia. Looking for mining jobs. Not limited to any location in Western Australia

Sr Structural Designer / PDS FrameWorks Coordinator and project set up.

Masters Degree in Mining Engineering and Mineral Processing; +3 yrs work experience as Research Scientist within Global Engeering Services of International Industrial Minerals Company; fluent in English and German language

Accomplished, Achievement-driven, Results Oriented and Passionate about realizing a challenging career that allows meaningful contribution to Metal/Manufacturing Industry .Had 3 years of primary aluminum production industry experience and recently graduated in material science and engineering

Piping Design & Stress Engineer, Caesar II, Rohr II, PDMS, Auto Pipe

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

PROFILE: A self-motivated and hard working Geologist with experience in Mining and Exploration of gems, precious metal and industrial metals. A capable leader, able to use own initiative and work as part of a team.

Smart, skilled and experienced, electrical/ mechanical available for camp/ remote locations ( extreme camping)

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

Young academically accomplished geotechnical engineer, practical experience in the mining industry both domestic and overseas.

Knowledge of Hydrotreating & Hydrocracking, Catalytic Cracking, Distillation and Amine plants. Knowledge of Process simulation (HYSYS, ASPEN Plus, PRO II and HTRI), PFD, P&ID, Flare and Relief systems, LDT, Hydraulic calculation, HAZOP review, Equipment sizing, TBE, DPDT and process data sheet

Entry level geologist

Bachelor degree of computer science and Seeking a challenging position, where my technical and communicational skills can be utilized and developed in field of software or quality assurance

Career Objective

Entry Level Mining Engineer

Mining Engineer Seeking employment in the mining industry that will allow career growth and the opportunity for advancement.

Geological Engineer, mapping, petrography, reserve estimates, exploration, mining, import/export, well drilling, GPS, logging, geoframe, geographix, excellent vocational English, MS Office, MBA in Business Administration, Experience in Marketing

Masters student in Materials Science and Engineering with BS in Applied Physics seeking engineering related position after graduation in Spring 2002.

FIELD OF SPECIALISATION (a) Design of method of extraction of pillars and their stability. (b) Design of support system for coal mines. (c) Multiple-seam coal mining. (d) Strata behaviour in Blasting Gallery method. (e) Design of supports and strata behaviour in Hydel Power Projects.

Process Engineer Graduated with a First Class from the University of Leeds 3-4 years experience of production, technical, commissioning and project management

Engineer with practical business, design and management experience in the areas of Civil and Geotechnical Engineering. Educated professional, committed to continuous improvement, ethics, teamwork and quality service. Detail oriented, excellent communicator, and capable of managing multiple projects

Mineral Processing Engineer(16 yrs exp.)10 yrs as mill sup't in Cu,Zn,Au,Ag operations. Personnal traits: team leader, flexible, resourceful, team-oriented, good communicator. Skills: technical & managerial aspects of planning, operation, projects, budget, processes, training, HSE

To obtain Position in Project Management or Project Engineering in an International Environment

PROJECT GEOLOGIST with 19 years experience in Environmental Consulting including soil and groundwater investigations and site remediation, and Oil and Gas Exploration.

I am a self motivated and ambitious Tanzanian holding a Bachelar of Science Degree in mining engineering who can work under pressure. I have got the basic skills in computer and user of Vulcan software.

To be a part of organization which enables me to cope-up with emerging as well as the latest trends and provide me scope for widening the spectrum of my knowledge.

LSIT, US Citizen, Willing to relocate

A highly qualified Materials Engineering Graduate, with extensive technical, inter-personal, analytical, and troubleshooting skills, seeks a challenging and exciting engineering position

A mining engg from indian school of mines, currently I am working in NMDC an iron ore company, I am in charge of operation and safety aspects in the comapny,

Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)

I headed the Paloncha coal project and Jangareddygudem coal projects as Project Manager and monitored the Exploration activities of the projects and successfully and achieved the stipulated targets (Oct 2006 to 10th July 2008)

I am a Materials and Process Metallurgist,, and a Plant Metallurgist ,who have seven years experience in both gold and materials processing in Ghana.

SAP, AutoCAD, Pro-E, ANSYS, ARENA, FMEA, DOE, Kaizen, Kanban, 5S, Six Sigma, MS-Office

Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;

One year and nine months of domestic mining experience, in a open cut, shovel/truck coal operation. Experience include, long term planning, road design, dump design, Pit design, scheduling, cost estimate, pit production supervisor of Shovel P&H and O&K fleet.

Mining Engineer, Programmer, Mineral Project Evaluation, CTL and GTL Technologies

I like new challenge and gain valuable new experience to develop my skill become a potential engineer. I am very familiar to operates computer and applies field equipments. I am a hard working person and be able to work under pressure as a team or individual, a dynamic, self-motivated, have

Structural Design, Stress Analysis, FE Analysis (Nastran / Patran, ANSYS 11.0) and Hand Calculations in MathCAD (Ref: Roark’s, API, ASME B31.3 and DNV)

Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.

Graduated Professional Chemical Engineer I have many years project engineering experience and this in a number of positions and countries.

Having experienced more than 23 years at various E & I projects consist of: Construction, Pre commissioning and commissioning

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out