Resume - Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects...

Misco Jobs

Resume #85721

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCES

Name of Company / Country: United Company For Inspection & Quality (UNICO)
Al Khobar, Saudi Arabia
Position Held: Electrical/Instrumentation Engineer Personnel supply to SA ARAMCO (Oil & Gas) & SABIC (Petrochemical)projects
Date Joined – UNICO: May 20, 2008 -May 22, 2009
Responsibilities/Duties

: Familiar with International Standards like NFPA70 NEC, IEC, NETA, NEMA, IEEE
- Preparation of inspection reports, testing & implementation, work accomplishment reports, issuance of procedures
- Involvement in the preparation of project quality plan, inspection test plans, special work procedures, check list and reports etc., in coordination with the QA/QC team.
- To inspect the Electrical Equipment to be used and installed as per client Inspection Test Plan (ITP), specification and quality manual.
- Attended weekly projects progress meeting, Inspection Quality Activities.
- Review and verify drawings/details as per Scope of work including Single line diagrams.
- Surveying of installation-supports, conduits piping works.
- Surveying installations and reports preparation in prior to the pre-commissioning.
- Raising of R.F.I (Request for Inspection) prior to all related Electrical work & submitting to QA/QC manager.
- Make material inspection report after receiving inspection is completed.
- Conduct surveillance site monitoring to assure that the electrical activities are based on company standards before final inspection.
- Support and assist the client during testing and commissioning of the equipment/system.
- Control and update drawings, specification, submittals received and approved by the client for construction site copy/Issued for Construction.
- Coordinate and attends weekly progress meeting together with the client and sub-contractors representatives.
- Prepare daily, weekly, monthly, progress report.
- Grounding grid installation inspection
- Cable on drum meggering inspection.
- Cable trench installation inspection.
- Cable laying on trench inspection.
- Conduit installation inspection.
- Electrical Installation in classified locations inspection.
- Electrical cables termination inspection.
- Testing of all protective devices like Relays, CT's etc.,
- Preparing NCR's & submitting to QC supervisor/Manager.
- As a Inspector, Maintain a record of Pro-active Violation & Violation after the facts of all sites activities
Projects Assignment
(From Recent) 1 Global Sources
Project: SAUDI ARAMCO Khurais Industrial Support Complex
Position: E & I QC Inspector
March 24, 2009 – April 25, 2009

2 Development Equipment Materials Technology Establishment (DEMTE)
Project: SAUDI ARAMCO AINDAR GOSP-3 (Gas Oil Separation Plant)
Waste Water System Upgrade Project
Position: E & I Engineer / QC Inspector
Dec 2008 – March 20, 2009

3 Sinopec International Petroleum Services Incorporated (SIPSC)
Project: Yanbu National Petrochemical Company (YANSAB Olefin)
Position: QC Electrical Inspector
July 2008 – Nov 2008

Name of Company / Country: US Distribution Asia Inc. for Reelcraft USA
Position Held: Technical Service Engineer
Period (From – To): Aug 15, 2004 – May 15, 2008

Responsibilities/Duties

:Trained in Reelcraft HQ Indiana USA with Engineering department for product technical specifications and special applications.
Improved technical communications between Asia Pacific clients and Reelcraft engineering department for special applications requirements. Communicate and travel abroad in Asia Pacific countries including Singapore to do technical service support to Reelcraft USA distributors. In mobile office, meeting distributors, engineers, directors, owners for technical application support with Reelcraft products.

Name of Company / Country: SECA Computer Shop Angeles City
Position Held: Desktop Support / IT
Period (From – To): Jun 18, 2001 – May 18, 2008
Responsibilities/Duties: Assemble new desktop unit. Setup & maintain, upgrade HARDWARE/ SOFTWARE and LAN and Internet Network setting requirement.
Troubleshoot / repair hardware or software problem on each desktop or PC unit for a walk –in or on-call service to customer.
Knowledge on DNS, IP, local router on Internet & email setting, applications, upgrading, downloading, etc.

Name of Company / Country: Lite-On & Kyushu Matsushita Industries Phil.Inc.
Position Held: Facilities & Maintenance Engineer
Period (From – To): May 25, 1999 – Jun 25, 2000
Responsibilities/Duties
: Joined training for ISO 9000. Training on ISO Internal Quality Auditing IQA. ISO Procedural Training Understanding, Documenting, Implementing, & Maintaining an ISO 9000 Quality System.
Performed and Improved Efficiency of scheduled maintenance for facilities and Clean Room equipments and instruments.
Power Cost Savings as a result of Improved maintenance schedule.
Represent L&K for plant inspection schedule of government agencies such as building officials.

Name of Company / Country: EXPO PILIPINO Corp.
Position Held: Electrical Supervisor
Period (From – To): May 25, 1998 – May 22, 1999
Responsibilities/Duties
: Acting as Duty Officer (Engineering & Maintenance Head) on scheduled basis.
Direct supervision on electrical projects installation and maintenance schedule on electrical power system of the EX PO Theme Park.
Owner's representative to witnessed Quality Control inspection of electrical system project.

Name of Company / Country: HSIN TUNG YANG CO. LTD, TAIWAN ROC
Position Held: Engineering & Maintenance Staff
Period (From – To): Aug 2, 1994 – Jul 31, 1996
Responsibilities/Duties
:
In an ISO 9001 Certified Company, Diagnosed, Repair & maintenance of electro-pneumatic, electro-mechanical, electro-hydraulic, pneumatic machines used in production area including food conveying systems and central air conditioning and refrigeration system of the factory.
Installation of new measuring and monitoring instruments such as pressure meters, volt / ammeters. Operation & maintenance of electrical power system.
Technical report and English operating manual/procedure writing for specific production equipment being used.

Name of Company / Country: AVANTEX MILL CORP.
Position Held: Electrical Plant Services
Period (From – To): Jun 19, 1993 –Jul 25, 1994
Responsibilities/Duties
: Regular inspection monitoring, operation & maintenance of electrical power system from 69KV substation, 13.8KV switch gear, 440V, 220V & 110V systems of the plant.

Name of Company / Country: Soft Touch Needle Craft
Position Held: Electrician & Draftsman
Period (From – To): Apr 25, 1988 – Jan 15, 1991
Responsibilities/Duties
: Operation & maintenance of electrical power system

Educational Qualifications/ Achievements

- Bachelor of Science in Electrical Engineering Holy Angel University (Dean's List)
June 1986 - March 30, 1991
Degree / Diploma
- Jose Abad Santos High School (Science Scholar)
June 1982 - March 1986
- Candaba Central School (5th Honor SPED Class)
June 1976 – Apr 1982

Other Information

- Registered Electrical Engineer: PRC ID # 3079

- Certificate of Completion: Calibration for Process Instrumentation
Meralco Foundation Inc. Technical Institute (Mar 8 –Apr 19, 2008)

- Affiliation: Institute of Integrated Electrical Engineers of the Philippines, Inc.
(IIEE Life Member since August 2, 1996 )

RECENT TRAININGS:
- In-house UNICO training for Saudi ARAMCO & SABIC Project Quality Control Inspection Procedures and ISO 9001:2000 awareness training
- Calibration Of Process Instrumentation (March 8 – April 19, 2008)
- Reelcraft USA Product Technical Service training (22 Oct. – 6 Nov. 2007) Indiana USA
- Reelcraft Indiana USA HQ, SEMA & AAPEX show Las Vegas NV USA (29 Oct – 11 Nov 2005)
- Other training thru Continuing Professional Education

SKILLS:
Technical Service Support 5yrs, Industrial & Manufacturing Electrical / electronics experienced 8yrs, Computer Hardware & Software literacy 8yrs.

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 1870)

Go to Search Parameters...

Brief Description

I wish to join a organization that can utilize my skills and training effectively that is commensurate with experience and qualifications and reward me accordingly. I am a well presented person and can take up new employment at short notice.

1991-1995 Electricity Engineering Azad University Of Kazeroon, Iran. 2002 Professional Media Production Barnet College, London. 2003 Professional Community Interpreter Workers' Educational Association London. 2004 Health and safety Weavers Trust, London.

Both geophysicist and computer enginner with good skills and experience in mining and oil & gas industry. Seeking a challenging position with growth and responsabilities.

Good knowledge Civil, Mechanical, and Electrical Work at Telecomunication Company. Also Site Acquisition work for BTS site.

Energy Industry Management Professional

Highly organized, detailed oriented and self motivated Lead Engineer having 6 years of professional experience in the field of product development/sustaining engineering

Dedicated Cost Engineering Professional with exceptional project corresponding skills, multinational work experience and extensive abilities in Cost estimation, Quantity surveying, Claim analysis, Tendering, Contract administration, Cost monitoring/reporting, Schedule monitoring, Bid management, Bud

Managed three R&D labs, namely, Failure Analysis Lab, Mechanical/Metallography Lab, and Metrology Lab

Experienced Mechanical engineer as Tunneling specialist in operation,maintenance,construction tunnels and executing projects.

I have successfully managed a business for some time and then completed an applied geology course at the Camborne School of Mines, this was essentially a practically based course that introduced and developed many aspects of geology, mining and environmental management systems.

Good analytical thinking, cross cultural communication and interpersonal skills, highly discipline, strongly motivated, dynamic personality, proven good organization and leadership skills; hard worker in any environments, experience using Dealer Business System, Asset Management Tools and microsoft

Presently working with PHILLIPS KILN SERVICES, MUMBAI as Project Engineer. it is a us-indo venture.

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

I have over 25 yrs experience in the oil and gas industry in various positions and with my technical training of 3 trades which are as follows; Licensed H.D. (diesel) mechanic, Licensed millwright, and Licensed motor mechanic I believe that I would be an asset to your organization.

Underground Blackhat Miner, EMT Miner Certification, Double-head Fletcher, Roof Bolter, Operate 488 Scoop

Mining engineer, master, underground and surface mining, feasibility studies, planning

Engineer / EMS / SCADA / Electrical / Telecom / Power Sector

Computer networking, electronics services and repairs computer maintainace communication system and intercom. Electrical power system,control systems and automation. I am holder of a Liecentiate in electrical engineering and a certificate of enginnering in electrical and electronics enginneing

Primavera P3/P5/P6 Senior Planner / Planning Manager with Expat experience in Middle east and South East Asia. I am seeking a position working along side local workforce where i can assist with local development.

A dedicated and enthusiastic Master’s graduate in Control Systems & Instrumentation with two years job experience in the industry

MS in Environmental Engineering - Geo-Resources Emphasis ( 5years )+ Diploma of Specialization in Mining Sciences and Technologies (Post-graduate Research 3 years) - Freelance experience in QUARRY PLANNING-DESIGN and ENVIRONMENTAL ASSESSMENT (2 years)

GIS Analyst/ Geoscientist...M.Sc. Geology, M.Sc. GIS, Cert. Data Processing and Info Tech

Fast learner and and succeed at everything I set out to accomplish.

To use my wealth of experience and full potential to contribute in a challenging organization.

Degree electronic engineer - 3 year expr. in industrial autoamtion - key skill PLc programming, SCADA developemnt; Robot programming; maintenance if industrial control system

QA QC Engineer, Laboratory Manager,

HR driver licence [Austr], Austr QF cert 3, Austr ESI cert 3, International switching Authorisation up to 88kv, Victorian line worker registration, WA licence for High Risk work, First Aid, Oh service testing [Metrel, NST], Safety blue card, EWP card, Internat Maint Electrician 4yr appy + 8yr exp

Mechanical-Piping Engineer - experienced in piping and procurement related activities for both offshore as well as onshore facilities

1. Mines planning engineer. 2. blasting engineer. 3. excavator incarge. 4. suppervisor. and 1. Bachellor of Engineering (Mininig Engineering). 2. Blasting Certificate.

As a Project/Contract Mgr, my background is in Construction. I have worked with Owners/Clients, Architects, & Engineers. I am experienced in continuous improvement in construction, process, & people mgmt. I'm experienced in business & project mgmt in small, large, & mega const. projects.

Good knowledge and efficient use of computer in data processing, record systems and the Internet (Microsoft Office packages, Operating Systems, Computer Maintenance and Assembling). B.Sc. Physics with Applied Geophysics (Second Class Honours, Upper Division).2005

Projects Estimation Engineer

Geospatial Analyst with over 10 years in GIS, 4 years in remote sensing, 8 years in autocad, 4 years offshore drilling, and a Geology degree.

Areas of expertise include Civil/ Mining Management, Construction Supervision, Project Management and Procurement.

Environmental project scientist with project management experience in the areas of oil and gas and dry cleaners. I have extensive Phase I and Phase II experience. I have a proven track record of being on time and within budget while working on multiple projects.

Bachelor of mechanical engineering working as rotating equipment engineer for condition monitoring and predictive maintenance using vibration analysis, ODS, alignment, lube oil analysis, Thermal imaging (Thermography), videoscope, operating parameters

Electrical engineer, Matlab, PLC, Labview

Bs. in Metallurgical Engineering, Ms. Environmental Engineering, Ms. Mining Engineering. 3 years experience in mineral processing and mining and 1 year experience in environmental auditing. I'm analytically skilled, good at working in a team, can carryout complex task with no supervision

Skills - Design, Procedures, Projects, Commissioning, Calibration, Maintenance. My qualification is Instrument/Electrical Engineering Technician. I have in Nuclear Power Plant, Chemical, Mining, oil and Gas Industry in Europe and Australia

In May 2009 I will graduate from Texas Tech University with a Masters Degree in Transportation Engineering, with 3.66 GPA. With over 1 year of experience in Commercial Project, I have developed a strong background in Planning and designing.

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services

Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.

Degree in Geological Sciences. Experience in laboratory of total and clay mineralogy analysis, sedimentology and petrography. Use of stereomicroscope and polarizing microscopy. Good knowledge of Office programs and basic AutoCAD and ArcGIS program.

Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor

Network Engineer

Arc view 3.2a, ERDAS Imagine 8.7,Arc GIS 9.1, (All extensions),AutoCAD/DeskMap,Ms Office ,DEM,Spatial analysis,DBMS

GIS, Geophysical Data Processing, Mapping, Airbone Surveying

Business Process Modeling • Process optimization • Project management • Lean Six Sigma • Predictive and Simulation modeling • Manufacturing reengineering • Data analysis • Metrics development and reporting • Organizational development • Sales effectiveness • Supply Chain Management • Patent engineer

Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out