Resume - Registered Architect (License No. 19900) since February 2005 issued by Professio...

Misco Jobs

Resume #85877

CONTACT INFORMATION:
View contact information...

Registered Architect (License No.: 19900)

PROFILE

Licensed Architect since February 2005. My career has led me to specialize increasingly in shop drawings and preparation of civil and structural deliverables including detailing of steel reinforcement utilizes Microstation Geopak software as well as 3D modelling of structures using Autocad solids and Autoplant 3D Structural. In like manner, I have experienced in detailing of piping support on a power plant project of Mitsubishi Heavy Industries, Ltd. where we use Microstation software for detailing. Most of the project I was involved in was essentially industrial project.

KNOWLEDGE and SKILLS

* Proficient in AutoCAD Program, MicroStation, and Microsoft Word, Excel and PowerPoint.
* Knowledgeable in using Autoplant 3D Structural, Microstation Geopak & 3D Studio Max.
* Familiar in using Bentley Navigator and PS Design.
* Skilled in sketching and free hand drawing.
* Familiar on office-use machines (Fax machine, Photocopying machines, Plotters/Printers, etc.)

PROFESSIONAL EXPERIENCE

„« AUSENCO Asia Pty. Ltd.
(Australian Engineering Mining Company ¡V an award-winning provider of innovative and high quality engineering and project management services to the global mining and minerals processing industry.)
Level 3 Rufino Building, Ayala Ave. cor. V.A. Rufino St., Makati, Philippines 1226
October 1, 2007 up to July 16, 2009
Job Title: Design Civil/Structural Draftsperson 3
Assigned Project: Didipio Gold/Copper Project (Nueva Viscaya, Philippines)
Hidden Valley Gold Project (Morobe Province, Papua New Guinea)
Sabodala Gold Project (Senegal, Africa)
Carborough Downs Coal Project (Australia)
Functions and Responsibilities:
* Deliver design drafting according to key deliverables by preparing design and detail drawings in line with requirements.
* Interface design drafting with other design disciplines.
* Maintain consistent design drafting standards across projects by adhering to Ausenco design drafting standards.
* Develop the capability of Ausenco in relation to design detail drafting by training and mentoring less experienced Cadet Draftspersons and providing support on a daily basis.
* Prepares Bill of Quantity.
* 3D modeling of concrete drawings/structures.
* 2D shop detailing of plates, steel beams & columns, angle bars for fabrications.
* Backchecking of 2D shop details.

„« Mitsubishi Heavy Industries-Technical Services Corporation
(A 100% subsidiary of Mitsubishi Heavy Industries, Ltd. ¡V Nagasaki, Japan)
27/f BPI Buendia Center, Gil Puyat Avenue cor. Makati Ave. Makati City
June 1, 2006 ¡V September 30, 2007
Job Title: AutoCAD Drafter
Division: Power Plant Engineering Division
Department: No. 1 Plant Engineering Department
Assigned Project: Rabigh IWSP Power Plant Project (Saudi Arabia)
Pacifico Power Plant Project (Mexico)
Omon Power Plant Project (Vietnam)
Shuqaiq Power Plant Project (Saudi Arabia)
Functions and Responsibilities:
* Prepares 2D drawings using Autocadd and Microstation software.
* 2D detailing of Piping Support from extracted 3D model.
* Extract piping support from 3D to 2d using support modeler.
* Prepares Bill of Quantity
* Encode Support Load Indication.

„« OM Lopez Design and Consultancy
#160 LL Bldg. Edsa cor. Panay Avenue, Quezon City
February 13, 2006 ¡V May 26, 2006
Job Title: Junior Architect / Cadd Architect
Assigned Project:
1. Reyes, Seven-Storey Residential Units,
#2 Phil Gun St., Marulas, Valenzuela City
2. Sarte, Two-Storey Residence,
084 Rizal St. Tarcan, Baliuag, Bulacan,
3. Sales, Two-Storey Residence,
Bacong-Bacong, Gasan, Marinduque
Functions and Responsibilities:
* Prepares complete drawings and detail plans (Architectural, Structural, Plumbing and Electrical) for construction permit and licensing.
* Planning & Designing Residential and Commercial Buildings according to clients' requirements.
* Coordinate with the client concerning design and design changes of the project.

„« TAISEI Philippine Construction, Inc.
(Over the past 131 years since its establishment, Taisei Corporation has undertaken many notable projects in Japan and overseas.)
23/F Equitable Tower Paseo de Roxas St. Salcedo Village, Makati City
June 15, 2005 to January 15, 2006
Job Title: Autocad Drafter
Department: Design Department
Assigned Project: IWS Warehouse Project (Tarlac)
Fujitsu Ten Factory & Office Expansion Project (Sta. Rosa, Laguna)
Nidec Generator House and Training Bldg (Sta. Rosa, Laguna)
Asahi F-5 Building Renovation (Pasig City, Philippines)
Functions and Responsibilities:
* Prepares Architectural and Shop drawings using Autocadd software
* Coordinate with the site manager regarding the progress and design changes of the project.
* Prepares As-Built drawings.
* Conduct Site Inspection.
TRAININGS and SEMINARS

Title Conducted Venue Dates
Autoplant 3D Structural Bentley Systems Ausenco,
Makati City 12-15-Nov-2007
Bentley Autoplant 3D Bentley Systems Ausenco,
Makati City 16&19-20-Nov-2007
Autoplant 3D Specification Generator Bentley Systems Ausenco,
Makati City 21&22-Nov-2007
Project Wise Navigator V8 XM1 Essential Bentley Systems Ausenco,
Makati City 23-Nov-2007

EDUCATION

Tertiary
Eastern Visayas State University (EVSU), Tacloban City, Leyte, Philippines
(formerly Leyte Institute of Technology)
Graduate, Bachelor of Science in Architecture
1998-2003

Secondary
Leyte National High School (LNHS), Tacloban City, Leyte, Philippines
1994-1998

Elementary
V&G De La Cruz Memorial School, Tacloban City, Leyte, Philippines
1987-1994

PERSONAL DETAILS
Date of Birth: 03 October 1981 Nationality: Filipino
Place of Birth: Tacloban City, Leyte, Philippines Height: 5'1"
Gender: Female Weight: 98 lbs.
Civil Status: Single

CHARACTER REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 1852)

Go to Search Parameters...

Brief Description

As a Mining Engineer, I have technical knowledge and managament skills. Computer skills (MS Word, Excel, Power Point). Drilling, Blasting. Tunneling. Development, Preparation and Production.

Nace level 3 coating inspector, CINI certified insulation inspector & Chartek certified fireproofing inspector.

I am an engineer holding a university degree (B.Sc) in electrical engineering Aden - Yemen, I have 8 years experience, 5 years in electrical & electronics maintenance and 4 years experience in a Company in Saudi Arabia has Industrial agencies responsible of after sales services

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

I have 10 years experience in instrumentation and control field. I have designed, installed, tested, calibrated, start up, commissioned, maintained and repaired industrial electrical and instrumentation control systems and skilled in PLC, DCS, Programmable drive based control systems.

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

Mining engineer with experience in strip mining and underground metals mines. Graduating with Master in 2007. Techinical interests in cut and fill mining.

Expertise in SIEMENS PLC & SCADA, B.E. (Electronics) from University of Pune

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

Strategic thinking Executive leading environmental, health and safety area. Recognized for assessing environmental, health and safety protocol, formulating and implementing highly effective policies, procedures and training to meet compliance, minimize injuries & reduce worker’s compensation claims.

I am having industrial sales experience of around 8 years in Hydraulics & filtration system & its component sales.

Qualifications: B.E (Mechanical). Graduated with second class, first division honors. Have an MEP consulting background with over 2 years experience. Advanced in: AutoCAD, Solid Works, Excel, Visual Basic programming, Word, TRACE heatload and Matlab programming.

Electrical engineering major in power .

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

Electronics and communication Engineer

Experienced Mechanical supervisor with over thirty years spent employed in the middle east.

GSM/CDMA Project Manager

Experienced & Seasoned Engineer

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

Contracts Manager

Im msc chemistry qualified chemist worked in iron ore mine in diff field as sampling,chemical and physical analysis, administration

Experienced Engineer, Diverse Background, Mining, Environmental

A chemist with technical skills trainings in Industrial Process Controls, Advanced PLC, Hydaulic Industrial Controls, PLC, Electro-Pneumatics, Calibration for Process Instrumentation, Advanced Industrial Motor Controls, Pneumatic Industrial Controls & Industrial Electrician

Project maintenance manager/planner/trainer

9 years of extensive experience in Project Management, Planning and Execution involving fabrication, erection & commissioning of Piping & Equipments in Nuclear Facilities, Petrochemicals, Aluminum Smelter and Gold Mine Projects.

Graduate in mining engineering,MBA in Operations Management,5 years experience in opencast mining

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

AutoCAD, AutoDesk, CATIA V5, Pro E, SolidWorks, MatLab, MathCAD, Maple, MDesign, Ricardo Wave, GT Suite, Fluent, BasicStamp, C++, C+, PSpice, and basic Java programming „« Windows operating systems, Microsoft Office

Maintnenace Foremen looking for longterm employment

Metallurgical Engineer

Speak, write and read French, English and Arabic. Abilities to acquire new knowledge and skills quickly

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

Extensive Experience in the industry!!

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

Instrumentation, Automation, control & electrical engineer with 3 years experience

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

Master of Geology, experience from african countries: Projecting, execution and interpretation of prospecting and exploration for branch "Economic Geology" (heavy minerals and gold, placers and hard rocks, greenstone belts terrains/shared rocks).

Having 4 year exp. in automotive sector.

IT PROJECT MANAGEMENT

Well versed with ISO-9001:2000, ISO/TS-16949:2002 QMS, MS-OFFICE

Geology and hydrogeology

GIS Expert (Esri & Geomedia)

Recent graduate with a Bachelors Degree in Mechanical Engineering looking for entry level position

I have a bacheors in engineering sciences, this is a relatively new discipline , which is essentially electronic engineering with a specialization in solid state physics and instrumentation

To obtain a full time job position in Mechanical Engineering ( Product Design engineering, Sales eng, HVAC, Analyst eng and Consulting)

Registered Architect (License No. 19900) since February 2005 issued by Professional Regulation Commission (PRC) of the Republic of the Philippines. Proficient in AutoCAD Program & MicroStation software. Familiar in using Autoplant 3D Structural, Microstation Geopak & 3D Studio Max.

Information Technologies, Windows2000, XP. English, Russian, Turkish

Logistics Manager, Rig Manager, Materials Manager

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out