Resume - Temporary Cards for Surface and Underground Mining

Misco Jobs

Resume #86112

CONTACT INFORMATION:
View contact information...

Electrician/ Lineman/ Miner

EDUCATION:

Recently acquired temporary cards for underground and surface mining via OMSL, KY

Northwest High School Diploma June 1995

Scioto County Joint Vocational School Industrial Electricity (1550 hours)
ALBAT (2003-3500 hours)

Electricity Competencies / Electricity theory & usage / Basis of Residential Construction/ Basis of Commercial Construction, including conduit usage and bending / Motor Control and Applications / Programmable Logic and Computer Control / N.E.C. Use & Practice /
OSHA Standards and Safety Practices / Blue Print Reading / Applied Science and Electricity / Applied Math with Algebra

Accomplishments and Activities:

Junior Vice President / VICA club member

WORK HISTORY:

Accurate Electric 153 Outerbelt St. Columbus, OH 43227
Job Title: Electrician From 03-95 to 01- 98
Description of Duties, Responsibilities, and Equipment Operated: rough-in for residential; laying out circuits; pipe bending and usage; setting devices; installing service equipment; trouble-shooting; cad welding; working on new and old construction; working w/ live circuits; digging for and installing underground services; reading blueprints; perform duties of Foreman on occasion; assign and follow up on duties; operation of: bucket truck, jack hammer, forklift, Bobcat, trencher, and usage of voltmeter and amp probes.

City of Columbus / Division of Electricity 3500 Indianola Ave. Columbus, OH 43214
Job Title: Lineman From 01-98 to 01-01
Description of Duties, Responsibilities, and Equipment Operated: perform a pre-trip inspection on truck every day; operate bucket and line truck; keep truck stocked w/ material; clean vehicles and job site after work completed; climb poles; service and repair street light systems; installation, repair, maintenance, and removal of overhead electric lines, light circuits, and electric accessories; build transformer banks; hang and wire many different kinds of switches and arrestors; switch gear; wire transformer, capasitors, regulators, dead end wire; set poles and frame them; work on single and three phase high voltage circuits hot; operation of: wire carts and reel pullers, jack hammers, bucket, hot hoist, block & tackle, ground cables, phasing sticks, shotgun, hotstick, tie stick, use lockout & tag procedures.

Wagner Smith 11825 Reading Road Cincinnati, OH 45241
Job Title: Apprentice 3rd Step From: 08-03 to 12-05
Description of Duties, Responsibilities, and Equipment Operated: perform a pre-trip inspection of truck every day; operate bucket and line truck; keep truck stocked w/ material; clean vehicle and job site after work completed; climb poles; some general line work; maintenance, repair, installation of traffic control systems; building concrete foundation for steel poles; general concrete work; welding; read blueprints; run rigid conduit up to 5" and PUC for traffic signal installation; install and repair of traffic signals; install services and temporary services; installation and repair of loop detectors; foreman of loop detector crew; work w/ direct boaring; build traffic controller foundations; set wood poles for temporary intersection; operations of: concrete saw, jack hammer, bucket truck, Bobcat, etc.

Capital Electric Line Builders
(Wagner Smith Division) 3137 Encrete Lane Dayton, OH 45439
Job Title: Apprentice 3rd Step From 03-06 to 12-07

Description of Duties, Responsibilities, and Equipment Operated: SAME AS ABOVE

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 1871)

Go to Search Parameters...

Brief Description

MIT educated program manager/engineer seeks full-time employment in engineering, financial modeling/investing, or engineering management involving optimization, system identification, simulation, graphical user interface design/implementation, and/or control system design/analysis.

AUTOCAD

Sr. Planner, Scheduler, Risk Management using Monte Carlo Simulation

Over 20 Years Experience Process Operator,Commissioning and Start Up Heavy Oil ,Oil and Gas Production

Land surveyor with over 30 years experience

BSc Geology (University of Botswana) 2001-2005, GDE Mining (Rock Engineering) University of Witwatersrand, Johannesburg, South Africa 2009-Current. Geologist - geological and geotechnical core logging, scanline mapping, soil profiling and chip logging. Diamond and percusive drilling supervision

Extensice technical skills incorporating computer literacy & engineering discipline. Highly regarded for a proactive attitude and an ability to thinl literally, providing idead & solutions. A dedicated individual, achieving reputation for consistently going beyond what is required.

Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.

Long experience, professional skills, mastered business sectors: Oil - Petrochemical plants, Banks, Government organizations, Multinational organizations, Hotels & Commercial companies all with its different type of applications, working environments and unique needs.

I am a recent graduate mining engineer that possesses the following skills: analyzing complex numerical information, working enthusiastically and productively under pressure, dealing professionally with teammates, and working efficiently in a variety of teams and on my own initiative.

Chemical Engineering 5 years degree with Production Management specialization

I am part of the team Responsible for the routine, preventive & Predictive Maintenance of all the Static & Rotary equipments of LPG, NGL, Dehydration unit & Sulphur Recovery Unit.

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

Experienced with pumps, fans, turbines and compressors and all support equipment

Procurement Purchasing Logistics Inventory Control Contracts Negotiations

Security Executive with massive corporate and international exposure. Expert in Afrcan matters and have massive and extensive security network in Africa.

Degrees in Geology and Environmental Studies (Minor). Experience includes: Environmental and Geotechnical Field Investigation (Soil and Rock borings, Soil and Rock classification, testing); Geologic Mapping; Construction Observation/Inspection; Data Analysis; Report Writing(geo haz, data, phase1,2)

Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments

Results Driven Project Manager w/16yrs Industry Experience. Master of Civil Engineering/BSc Petroleum Engineering/Certified PMP/EPC Management/AFE Management/Contracts Review/Risk Analysis/Global Client Experience/Global Team Development: Lead by insistence on personal accountability and growth.

HSE Remote Safety Medic, Offshore Medic, Emergency Medical Technician, Safety Officer

Industrial Electrician 20 yrs. experience in automated industries. PLC, instrumentation, construction, commissioning and maintenance / troubleshooting

Maintenance Planner - Mechanical Engineer

B.E – Ceramics & MBA, having with 12 years of experience in an integrated Steel Plant Projects & Maintenance of Refractory -Applications/Installations/Selections/Inspections in India and Abroad

I have spent about 8 years, applying innovative approaches to spatial data development, Integration and Management practices in my various capacities.

PhD in Chemical engineering with lots of laboratory experience including, but not limited to design of experiment. Cummulative GPA 3.52. Specialized in electrochemical synthesis.

Cwi/QA/QC Manager

I Mohammed Yaseen Kajee hereby wish to apply for employment through your company in the capacity of Client Projects Quality Manager, Senior Client Quality Assurance Engineer / Inspector and Client Safety Representative. I have had extensive experience in Quality Management Systems , Pressure Vesse

I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.

Since April 2004: Aeronautic Source Inspector “hardware” in Bourges and Méru (only 1 to 2 missions of 4 hours/month) for a diversified technology and manufacturing leader, serving customers worldwide with aerospace products and services (40% of sales); control technologies for buildings, etc

Experienced and hands on work on MTS, SEM, XRAY, Hardness, Optical Microscopy, Metallography, Lecos etc.

I completed a Master Degree in Business Adminitration and Bachelor of Science Degree in Mining Engineering, and have more than eight (8) years experience working in the mining environment.

Mechanical Engineer

Precision Millwright w/ Machinst and Electrical Background

Welding and electrical and management and mining class 32 hour certified fork lift operator

Free! DYNAMIC PROFESSIONAL - MASTER OF SCIENCE - CONSTRUCTION SAFETY COORDINATOR - PROJECT MANAGER -ADVANCED FIRST AID, SAFETY, & RESCUE

Engineer, MWD, LWD

To secure a position in Environmental Health and Safety (EHS) Compliance with an established organization utilizing my 20 years of EHS skills, knowledge and experience.

20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.

Piping and Welding Supervisor QA

Soil Test: Determination of liquid limit, Plastic limit, plasticity index. Determination of Maximum Dry Density, Determination of the California bearing ratio, Determination of Relative Density Test for field. Speedy Moisture Test. Test on Sand: Specific gravity Test, Determination of the Max

Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management

Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

Field Project Manager (Crosswell Seismic). Highly motivated, enthusiastic Borehole Seismic Project Manager with 11 years of wireline and seismic experience. Successfully managed numerous projects in diverse locations around the world.

I am looking forward to a challenging opportunity exponential growth in Mining. During my experience till date I have larnt a lot about the Industry.

I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial

Chemical/Process/Project/Field Engineer/Chemical/Process/Project/Field Engineer

Safety Officer, Process Supervisor and Marine Engine Driver and experienced in Petrochemicals, Power Plant and Marine Industry

Temporary Cards for Surface and Underground Mining

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out