Resume - I am Chemical Engineer over 18 years of experience in all aspects of combined cy...

Misco Jobs

Resume #88730

CONTACT INFORMATION:
View contact information...

PROFILE

* Over 20 years experience in HRSG and water treatment, boiler chemical dosing and drinking water supply related issues in Enviro-Fuel Refinery of Canada and Abu Dhabi Power & Desalination Stations of UAE
* Supervision of laboratory, power station chemistry and water/wastewater treatment operation processes
* Strong organizational/project management skills and can meet challenging budgets and deadlines
* Highly skilled at providing neutral facilitation, negotiation, mediation and complex problem solving
* Experienced in drawing people together to work collaboratively and exercise duties impartially
* In depth knowledge of cultural and community concerns in establishment & protection of safe water supply
* Research and development of quality control and remediation processes for environmental projects
* Evaluation of water/wastewater treatment projects to meet environmental regulatory compliance
* Expert knowledge of USA, Canadian and WHO environmental and health & safety regulations
* Proficient in Windows, MS Office and Internet tools

AREAS OF EXPERTISE

Water/Wastewater Treatment* Steam Cycle Chemistry * Environmental Program Design* Facilitation/Mediation
Refinery & Distillation/Heat Recovery Steam Generation Processes * Downstream/Upstream Operations
Chemical Dosing * Evaluation * Reverse Osmosis * Demineralization * Settling Ponds * Oxidant * Flacula Disinfections * Aeration * Data Review * Drinking Water Supply Quality Standards * Project Management
Source Protection * Contaminants Investigation * Gas Emission Detoxification * Scientific Reporting Commissioning Consultation * Complex Lab Analysis * ISO/EMS Implementation * Emergency Preparation

EDUCATION

Master of Science in Chemical Engineering (completed courses towards)
Queen's University, Kingston, ON 2000 – Present
* Research in development of gas and air combustion, and NOx reduction in turbulent flow
* Courses in: Transport Phenomena, Environmental Health & Safety, Corrosion & Failure, Process Control

Master of Science in Applied Chemistry (equivalent to Chemical Engineering)
Dhaka University, Bangladesh

PROFESSIONAL EXPERIENCE

Clean Water Consultant
WESA, Kingston, ON 2006 – Present

Groundwater Quality Investigation, Wastewater Project Site Assessment,
Contractors & Technology Evaluation, Community Liaison, Environmental Planning
* Investigated proposed wastewater sites for groundwater quality and contaminations in mining areas
* Assessed wastewater treatment and discharge facilities for a children's camp; consulted with government officials and evaluated contractors for tender regarding the design capacity, cost and impact of discharge site for installation of a tertiary wastewater treatment system
* Met with neighbouring landowners, municipal representatives, source protection agencies, contractors, and documented concerns and parameters
* Liaised with representatives from Ministry of the Environment, Conservation Authority, Ministry of Health and community stakeholders in development of appropriate treatment systems

Quality Assurance Engineer
Aceram Technologies Inc. Kingston, ON 2005 – 2006
Process Audit, Polymeric Fibre/Ceramic Integration, ISO 9001:2000 Implementation

* Quality assurance monitoring of chemical and production process, material formulation, slip preparation, casting and firing ceramic equipment with polymeric fibres for ballistic protection and maintained all records
* Trained technical staff on quality assurance, design and specification, and safety policies and legislation

Water and Wastewater Management Supervisor
SNC-Lavalin PAE Inc. (DND Canada), Kabul, Afghanistan 2003 – 2004

Water / Wastewater Project Evaluation, Environmental Planning, Health & Safety, Plant Commissioning

* Oversaw water/ wastewater treatment project and plant investigations; supervised laboratory, municipal water supply and waste disposal processes, and worked with site operations for certificate approvals
* Prepared guidelines for drinking water standards and waste discharges (liquid/solid) based on Canadian and Ontario environmental regulations and wrote proposals involving ion exchange and reverse osmosis
* Commissioned and managed plants used for pre/post treatment of groundwater and wastewater treatment; monitored effluent, routine analysis, and followed up membrane filters regeneration and maintenance
* Conducted routine lab tests, collected data and reviewed; set up project management schedules, wrote emergency response; provided information on various alternatives, establishing safe drinking water and source protection programs and commissioning plants and equipment

Research Assistant, Environmental Engineering Group
Civil Engineering Department, Royal Military College of Canada, Kingston, ON 2002 – 2003

Environmental Monitoring, Hazardous Contaminants Investigation, Risk Assessment,
Analysis of Organic/Inorganic and Biological Agents, Operator Training Modules, Education Program

* Visited Canadian Forces Bases for environmental monitoring of surface/storm/groundwater contaminants and oil spills, hydrological survey, risk assessment; collected field data and samples and conducted
* Researched, designed and developed training modules for operators and technical personnel of Dept of National Defence (DND) water treatment facilities based on USA and Canadian environmental regulations

Evaluation Engineer / Specialist, Wastewater Treatment Project
Enviro Fuel Refinery, Kingston, ON 2002

Environmental Project Evaluation, Federal/Provincial/Municipal Regulation Compliance,
Regulator & Consultant Liaison, Laboratory Research, Wastewater and Air Emission Investigation

* Oversaw wastewater treatment process evaluation and project management
* Conducted field audits, studied remediation processes and site selection for waste disposal
* Liaised with regulatory agencies/contractors to ensure compliance with environmental guidelines & bylaws
* Assessed environmental impact for oil/gas sector, conducted laboratory analysis of organic/inorganic contaminants for composition characterizations/utilizations/disposals, and wrote reports for approvals

Research Chemist/ Quality Control Supervisor
UAN Co-generation Power & Seawater Desalination Co., Abu Dhabi, UAE 1979 – 2000

Water Treatment Plant Operation, Quality Control, Lab Analysis, Departmental Coordination,
Combined Cycle Power Plant Chemistry, Ion-exchange/Reverse Osmosis/Chemical Dosing System, WHO/ISO Compliance, Commissioning, Contract Specifications, Maintenance, Proposals
* Managed laboratory and quality control throughout multistage distillation and treatment processes, as well as station chemistry, air emission and environmental pollution control
* Monitored effluent/toxic contaminant, chemical dosing, heat transfer, chemical/mechanical cleaning of heat exchange tubes, scaling, corrosion/material failure, flue gas emission and environmental pollution controls
* Oversaw demineralization process, boiler steam cycle chemistry, gas emission detoxification, heat transfer efficiency and design modification, cathodic/anodic protection and abatement programs; worked with stations to identify, resolve and prevent process/ quality problems and reduce waste stream generation
* Operated, maintained reverse osmosis/water treatment (demin) plants for zero solid discharge to feed make up; controlled chemical dosing to achieve high quality with quantity on feed water and supply drinking water
* Incorporated new technologies related to distillation, reverse osmosis and water treatment (cation/anion resins, membrane) plants & regeneration, chemical/mechanical cleaning and gas emission desulphurisation
* Researched, designed and reviewed systems/ procedures, prepared samples, analysed hazardous/non-hazardous process fluids and wastewater/storm water, examined metals, organic/inorganic deposits & oil gas, tested chemical additives for heat transfer optimization, and entered data for computerized analysis
* Followed up on-line parameters/ instrumentation control with calibration adjustments to ensure instruments in working order; reported material failure and environmental pollution & safety inspections to the appropriate level of management, and prepared technical reports supplying comments or recommendations
* Attended daily departmental meetings for planning and scheduling of boiler, distiller, water treatment plants and equipment start-up/shutdown, chemical cleaning/blow down, emergency/preventive maintenance, storage and waste disposals, and ensured safety and plant checklists were accomplished and properly filed
* Issued work permits in conjunction with maintenance, safety, environmental and fire personnel, and ensured compliance with HSE and operational guidelines
* Initiated and monitored start-up/shutdown for chemical/mechanical cleaning, all maintenance requests for routine repairs, monitored emergency/preventive maintenance work carried out on operating units as well as annual overhauling, and directed the preparation of units for start-up or shutdown
* Maintained liaison with other departments such as operation/maintenance staff, consultants/ contactors for rectification of various defects on equipment, and participated in the daily management discussions and decisions for solving troubleshooting of emergency problems.
* Physically inspected all facilities, initiated projected development, design modification and enforcement actions; investigated all wastewater and air emissions; ensured wastewater and exhaust air (SOx/NOx) were treated and waste stream was neutralized before entering ecosystem; prepared monthly reports
* Studied improvement of pollution by examining gas emission, hazardous chlorine/acid leak safety systems, cathodic/anodic protections, chemical (acid)/mechanical (hydro-jet) cleaning of heat exchangers & sponge ball cycles to minimize tube corrosion of Cu-Ni/Al-Zn alloys, and scaling to prevent heat loss; prepared final scientific reports supplying comments for reanalysis on findings for achievement of optimum output
* Evaluated effectiveness of anti scaling and corrosive additives/chemical catalysts (organic/inorganic synthetic polymers) by investigating the plant from different stages, heat transfer performance at different dosing rates (parts per million) and modification for maximum output; associated with investigations studies into all wastewater, and implementation of methods of recovery for treatments
* Commissioned boiler, distiller, reverse osmosis, water treatment (demonetized) & chemical dosing plants, discharge water neutralization tanks, air detoxification facilities, and guidelines for environmental policy implementations for clients, including: BABCOCK/BORSIG (Germany), SKODA (Czech), SIDEM (France), ITALIMPIANTI (Italy), IHI (Japan), Calgon/USA, BASF (Germany), Kao (Japan) and General Electric (USA)
* Collaborated in joint scientific studies investigating contamination including heavy metals (i.e. arsenic, mercury, lead, copper, zinc, silver and various reactants) and toxicological environmental protection
* Involved in risk assessment, designed modification for improving heat transfer of heat recovery systems & product quality development, as well as for corrosion/failure protection and detoxified exhaust gas disposal
* Operated various standard lab tools such as chromatograph, spectrophotometer, flame photometer, ICP atomic absorption, Karl Fischer titration, bomb calorimeter, viscometer & turbidity/conductivity/PH metres
* Consulted on operation of series of power stations producing 100 MGD drinking water by seawater desalination process based on World Health Organization (WHO) standards
* Provided ISO 14001 guidance on the development and implementation of environmental management systems and principles, and also their co-ordination with other management systems

RESEARCH PAPERS AND PROFESSIONAL TRAINING

Presentation of paper on Challenges in Applying Canadian Drinking Water Guidelines in Ontario Drinking Water Standards, Standard Branch, M/O Environment (Toronto) – Nov. 2003

M.M. Shamsul Karim, "Tube Corrosion in High Temperature Stages of MSF Distillers," Proceedings of World Congress on Desalination & Water Sciences, 1996, Vol. 5, pgs 301-307

Completed Desalination & Water Treatment Technology Training & Workshop, Glasgow University, UK

Completed and/ or facilitated seminars on Co-generation Power & Distillation Processes, Boiler Steam Chemistry, Raw Water Pre-treatment/Demineralization Systems/Zero Liquid Discharge (ZLD), HRSG Water Treatment/ Circulating Water System Water Treatment, Quality Assurance & Laboratory Management, Heat Transfer Optimization, Air Emission/Detoxification, Corrosion Prevention/Failure Test, and Hazardous Materials & Safety, organized by Abu Dhabi Water Electricity Department of UAE

REFERENCES

Prof. Dr. Michel Tetreault, Supervisor
Environmental Department of Civil Engineering, Royal Military College (RMC), Kingston, ON K7K 7B4
Tel: (613) 541 6000 Ext. 6350

Prof. Jean Heroux, Supervisor
Environmental Department of Civil Engineering, Royal Military College (RMC), Kingston, ON K7K 7B4
Tel: (613) 541 6000 Ext. 6471

Mr. Byron O'Connor, P. Eng., Senior Engineer/ Principal
Water and Earth Science Associates Ltd. (WESA), 4 Cataraqui Street, Kingston, ON K7K 1Z7
Tel: (613) 531 2725 (B)

Mr. Frank Vice, Human Resource Manager
SNC-Lavalin PAE, 80 Queen St. Suite 202, Kingston, ON, Canada, K7K 6W7
Tel: 613) 565 7853 (B)

Mr. Salauddin Khan, Senior Engineer
Planning & Efficiency Department
Abu Dhabi Water and Electricity Authority, P. O. Box: 6120, Abu Dhabi, United Arab Emirates
Tel: 971-2-644 2835 (H.), 971-2-627 1300 (B)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1863)

Go to Search Parameters...

Brief Description

20+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Professional Electrical Engineer with 30+ years experience. In the latter 20 years my experience has been in a wide range of areas of project engineering predominantly in heavy industry. Looking for new challenges in the international arena

I am Chemical Engineer over 18 years of experience in all aspects of combined cycle chemistry, chemical/water treatment operation, quality control and analytical services as Plant Chemist/ Quality Control Supervisor in co-generation power stations. I am a Canadian citizen and willing to relocate.

Having served 7.5 years as a Mine Manager, 5 years as a Plant Manager, 8 years as a Purchasing Manager , 5 years as a Sales Manager and interact with ethnic diverse populations, I am confident that I can make a valuable contribution to your organization’s future projects.

Coal Quality, Bulk Commodity Supply Chain Logistics, Coal Technology & Utilisation, Coal Marketing / Technical Marketing, Coal Processing, Bulk Commodity Inspection and Testing, Marine Surveying, Metallurgical Testing, Laboratory Management, Quality Assurance, Training Development and Delivery

20 Years Experience in Mechanical Maintenance, Budgeting and control, Computer literate, Man Management, all up to senior level.

17 years as Banksman / Onsetter & 4 years experience as Shaft Timberman

I have 11 years experience in fixed plant areas, 7 years as Maintenance Supervisor and 4 as Senior Maintenance Planner

Operating & Theoretical Knowledge of ICP, AAS etc , Strong knowledge of Wet Analytical Techniques in copper & Gold Mining Industries.

cad operator using micro station. detailing and some design in 3D

Willing to do the job as a geologist in Major Corporation and apply all my skills and knowledge for the growth of the corporation

plc ,cement plant sponge iron ,flexible packaging unit

I am a SENIOR GEODETIC ENGINEER with experiences 15 years in Mining, Oil & Gas and Consulting Bisnis. I want to work with the International Company with the position is a Senior Surveyor

Experienced base/precious metal Exploration/Mining Geologist

Over 25 years of design, engineering, Project and Construction Management experience for a variety of projects and fields.

Mining exploration and prospection experience , drilling surveys, resources estimation.Working with drills, helicopters, land moving equipment and other specialized machinery to expose various layers of the soil, rocks or minerals.Proactive, enthusiast, punctual.

8 Years Design Experience In Automotive Domain With Advanced CAD Softwares

Mining engineer with experience is 8 years in mechanized surface coal mining, (6 years in planning and operation (HINDALCO), 2 year project planing, Proficiency in Mine Planning and Design software (DATAMINE, NPVS, MINEX, AUTO CAD),equipment planning, financial modeling, mine costing, etc

Has twenty one (21) years of experience in the Field of Engineering, Design and Construction. Experienced in Front End Eng’g, Preliminary Eng’g & Detail Eng’g / Design Phase Work-share Execution, and Construction / Final Design / Eng’g Support for Construction / As-built Phase & Quantity Surveying.

Process operations, equipment maintenance technician

I am chemical engineer with hands on experience in copper / cobalt hydrometallurgy.

I am currently working with Australian Multinational Gold Exploration Company as a Geologist with Indo Gold Mines Pvt. Ltd., Bangalore. Our Exploration target is Gold Prospect in Rajasthan, India involved with grassroots Gold Exploration. Working within a small team has allowed me exposure to all le

1.Mine Deputy (Shift Foreman): (2001 – Present) 2.The operator’s helper on a dragline or a shovel (oiler) (June-August of each year of 1997, 1998 and 2000-2001)

Production manager in a granite factory, Giving programming to the blocks for loading and marking slabs tiles according to the consigment of orders and despatching the material to the yard.

Experienced Thai Mine and Expl. Geologist

16 yrs in exploration, 12 yrs working with computer applications. I create 3-D geologic models using Gocad, proficient in DATAMINE and Vulcan. I developed and support a GIS database of the Great Basin using MapInfo. Provide IS services, software and hardware and training. Geology B.S.

Computer literate and familiar with numerous types of application software, including AutoCad and Minesite.

GIS GEOLOGIST, MSc DEGREE, MAJOR: HYDROGEOLOGY, OVER 5 YEARS OF EXPERIENCE, WORKED IN MONTENEGRO, MONGOLIA, AUSTRALIA, SPECIALISED IN PRESENTING THE RESULTS OF GEOLOGICAL EXPLORATION USING VARIOUS GIS SOFTWARE AND TOOLS, CREATION AND MANAGEMENT OF DATABASE SYSTEMS, HYDROGEOLOGICAL RESEARCH

Confidence, professionalism and attention to detail characterize my career. I am analytical and practical by nature. I solve problems by communicating effectively with all parties, by assembling the appropriate data and by analyzing the solutions to optimize the engineering process.

Planning and prioritizing • Time Management • Team Development • NDE Techniques • ASME, AWS, API, ISO • TEM, SEM, X-Ray diffraction • Technical Communication• In-depth knowledge of most alloys system

I am a mining engineer currently employed by Algoa Consulting Mining Engineers in Port Elizabeth South Africa. I have experience in mine planning, surveying, environmental management, rock engineering and health and safety aspects of mining. I have a open cast blasting ticket.

I’ve done a lot of projects in the past 21 years. My past experiences have typically been in 24 hr/day industrial plants including pulp & paper, Alcoa, and several utilities. I can handle any part of the project from concept to start-up.

Exploration/Mine Geologist with 25 yrs experience in gold, base metals, diamonds, PGMs. Prefer short/long term contract position

20-year experienced and competitive bilingual Senior Mining Engineer with accomplished background in providing effective and creative consulting solutions to meet or exceed client needs.

Objective To find a challenging opportunity in an environment which best utilizes my expertise in coal mining, engineering or coal quality.

Experienced Electrical Engineer / Project Manager both surface and underground.

Twenty-five years of mining experience including operations supervision, mine planning, drilling and blasting, operations support engineering, feasibility studies, property evaluation, and environmental compliance

Metallurgical/Environmental/Maintenance/Process/Project engineer with 30 years experience in hydrometallurgical, mineral processing, process, project, maintenance, environmental, lab, computers and budgeting.

Looking for a position in AFRICA, ASIA or SOUTH-AMERICA. More then 20 years practical experience in the field.

Experienced Document Controller for ISO 9002, 9001 (Quality Management System) and 14000 (Environmental Management System),Document Writer and Internal Auditor for ISO, Network Administrator and Systems Analyst

- Short and Long Range Open Pit Planning - Surface mine modeling & design - Equipment scheduling - Computer programs for mining applications - Excellent communication and interpersonal skills - Reports and presentation

Mining engineer, Minescape, MineSight and Project evaluation

Application for the post of Mining Engineer ,I wish to apply & work for suitable post in your organization. I have completed my Bachelor of Engineering in Mining, having 9.5-years exp in Open cast Limestone quarry,having excellent communication , management planning and problem solving skills.

As a team member of your organization I can provide: Manage and control operations to produce gold,copper and silver which meet quality and quantity standars set by the company. • Develop, manage and control operating and capital budgets to ensure the goals.

Seeking a Challenging position in the field of Electrical Engineer, where I can utilize my professional skills & expertise

Mechanical Engineer with 18 years of experience in Maintenance of Heavy Mining Machinery and Material handling systems.

M.TECH, METALLURGIST, 5+ YEARS EXPERIENCE IN METALLURGICAL PROCESS INDUSTRY LIKE STEEL, COPPER.ALSO R&D EXPERIENCE

14+ years hands on experience in GIS Specialist, domestic and international

I am searching for employment as an engineer in the Mining / Oil&Gas Industry. My education and early job experience were mining related. My past nine years were spent in oilfield services. I believe that I would be an asset to a company in either field.

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out