Resume - Power plant engineer involved in a variety of power plant equipment design and c...

Misco Jobs

Resume #8921

CONTACT INFORMATION:
View contact information...

Objective:
Challenging position in a growth-oriented organization, which offers diverse job responsibility in mechanical engineering using my skills as a responsible, efficient motivator of successful engineering teams.

Education:
University of Central Florida, Orlando, FL
1998 - 2000
MS in Mechanical Engineering. Concentration in Mechanical Systems. Dean's List

Northeastern University, Boston, MA
1994 - 1997
BS in Mechanical Engineering. Minor in Mathematics. Dean's List

Work Experience:

Mechanical Engineer

Siemens Westinghouse Power Corporation, Orlando, FL - Power Generation Industry.
2000 – 2004
Thermal Equipment Engineering Group

As a cognizant engineer of the Thermal Equipment Engineering group, the area of work is on Heat Recovery Steam Generators (HRSG), Steam Surface Condensers, Cooling Towers and Rotor Air Cooler Kettle Boilers. Position involves writing technical design specifications for the above equipments based upon the customer specification (Contract) and a variety of codes such as the American Society of Mechanical Engineers (ASME) section I (Boiler Code) and section VIII division 1 (Pressure Vessels), Heat Exchange Institute (HEI) standards, Tabular Exchange Manufacturing Association (TEMA) etc.
In addition, responsible for jobs procurement such as the review of vendor drawings, erection procedures, shop fabrication procedure, review and development of P&IDs and associated instruments list. Also participate in vendors bid evaluations, review or proposals technically and commercially in order to select a fit vendor, responsible of project management and review of all vendors deliverables. Responsible for interface with the vendor, A/E and trouble shooting related issues that might arise at site during project commissioning."

As a group Technical Lead for the Steam Surface Condenser and the Rotor Air Cooler Kettle Boiler Heat Exchangers, I had the responsibility to come up with a standard design for both of these equipments in order to reduce the engineering hours and the cost involved. In addition, I was also involved in standardizing the Selective Catalyst Reduction (SCR) System used in the Heat Recovery Steam Generator to minimize the exhaust Nox from the gas turbine. I have also been involved in doing some Finite Element Analysis calculations with one of our HRSG vendor to come up with the best Tube to Header Connection and have been published to the ASME committee for their review. Position also involved heavy customer contact centered on bid proposals, vendor specifications and client support. In addition, support to marketing/sales groups in order to secure more orders and applications group during bid proposals stage.
Aside of my office responsibilities, I have been also involved in many of "Site Readiness Reviews", it is a process in which the responsible engineer goes out to the site and check on the completeness of the equipment and checks for any show stoppers for the operation of the plant. My responsibility involved a complete check of the HRSG, rotor air cooler and the condenser.
One of the main challenges was to come up with a first time engineering Air/Fuel heat exchanger design to be used in conjunction with a Fin/Fan cooler used to heat up the fuel gas for better performance and to set up the control philosophy description for both of these systems and perform site commissioning of the system. The system was used in two different projects in Mexico and were successfully commissioned.

2004-Present
Balance of Plant Group

As a cognizant engineer of the Balance of Plant group, my scope of work included working on Fuel Gas Heaters, Fuel Gas Compressors, Fuel Gas Skid system and system design of main steam, feedwater, condensate and fuel systems. Responsibilities include process engineering/ mechanical engineering, engineering planning and scheduling and technical ordering document generation. My principle output include system design specifications (Design Basis & Functional Requirements), Engineering Flow Schematics and equipment specifications with calculations to support the design. From these documents, Supply Management can procure equipment and systems, and AE can complete the detailed design of the plant with appropriate overview / approval by BOP. My support of the Erection / Commissioning activities at site include walkdowns / inspections, resolution of site issues (questions, changes, performance problems)".

Mechanical Engineer

Yang Enterprises, Inc., Winter Springs, FL - Construction industry. Primary customers: Exxon Corporation, Mobil Corporation and Kennedy Space Center.
1998-2000
Has been given assignments to perform on-site inspections, and post analysis of the site. Work on mechanical as well as civil aspects of a design. Prepared contract documents, site investigation reports and bid proposals. Provided cost estimates for a government contract. Designed Gasoline Service Stations including site layout, grading plans, utilities plans, landscape plans, petroleum equipment schedules and convenience mart details. Concentrated on working with AutoCAD 14 and Micro
Station to generate plans.
My job responsibilities included to set up AutoCad training classes for all the employees.

Contractor

CDI Corporation - Westinghouse Power Corporation, Orlando, FL
1998
A six-month contract assignment within Strategic and Product Development group. (John Schwab, Manager) Contract consisted of working on 501G 2x1 Combined Cycle - Ironwood Power Project-AES.
Assignment involved modifications of proposed drawings made on AutoCad 14 version, heat balance cases, and process flow diagrams.

Mechanical Engineer

SGM Engineering, Inc., Altamonte Springs, FL - Commercial HVAC and Plumbing industry.
1997-1998
Worked as a mechanical engineer, while performing some drafting and analysis on final product delivered to clients. Acquired experience both in mechanical and electrical aspects of a design process. Have been delegated major assignments with significant client base.

Training Experience

* Acquired a certificate from the American Society of Mechanical Engineers upon attending "Section VIII, Division 2 Pressure Vessels" training class.
* Acquired training certificates from Siemens Westinghouse in a variety of Power Generation Industry equipments such as combustion turbine, steam turbine, combustion turbine performance and design and project management.
* Acquired a certificate from the American Management Association "AMA" from participating in Project Management with Suretrak Course.

Publications
* I have published a paper at the ASME International Gas turbine Institute titled "Comparison to various Tube to Header Attachment Detail Under Cyclic Service".

Awards
* I was awarded two performance awards in recognition of the outstanding contribution to the success of Siemens Westinghouse.
* Received a spot award as a result of dedicated support to other groups to meet project deadline

Computer Experience:
Microsoft Office 97,98, 2000, Master Series (Ideas), MatLab, AutoCad, Mathcad, Micro Station, Ansys, Pro-E and Gate Cycle.

References:
Professional references are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 1872)

Go to Search Parameters...

Brief Description

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

To secure a full time Mechanical Engineering position in which I will utilize my technical and interpersonal skills to further the company and myself.

young and energetic graduate with professional experience in Land Surveying

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

COMPUTER SKILLS, AND CAPACITY TO DO WORK WITH EVERY KIND OF PERSON

PLC, HMI, C/C++, PHP, JAVA, mySQL, microcontroller, Embedded, Firmware,DSP

I have 5 years as a Cad Designer using Inventor 3D and AutoCAD

Planning/Schedule Engineer,Maximo IMplementor,

Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development

I am a multiskilled candidate with more than two years experience. I have acquired Engineering as well as Business Education. I am fully convesant with Corrosion Prevention system for Underground pipings, API 650 standards for tank design and HSE standards.

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Having Cement and Pharma R&D Experiences, I would like aquire a career in the same feild. My Skills includes that,I can work with part of team or indepentantelly. Fast decision making, analytical skill.

Being a Technician for 17 years and 13 years of it is in oil and gas sector. As Senior Technician in one of MNC company in Malaysia I believe with my skilled and knowledge in Operation and Maintenance field can contribute some value to the future company. Expert in Gas Station and pipeline monitori

Project Controls/Sr.Planning/Project Engineer

Confident to handle the construction and quality control activities as specified in the Drawings and applicable standards and specifications.Familiar with Material Inspection, dimensional check and documentation as per Construction Materials Standards such as ASTM / ASME SA 106, SA 515, SA 516etc.

Specialist in Telecom looking for a job in CIS

Diplom engeneering geology with one year of experiance in break water

Im currently an engineer in ghana in africa for a caterpillar dealership working mainly on power generation all over ghana including 2 mine sites. My duties include breakdowns servicing and maintenance and major overhauls . I also teach locals and supervise them .

Biomedical Engineer

Electronics, electronics of power, electromagnetic compatibility and signal processing , NDT, reliability, maintenance, instrumentation, sensors

EPC/EPL Manager, Rehab & startup projects. Polished broad based o/seas tech & mgmt skills

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

A self-motivated Reliability Engineering with experience in cement industry, indonesia

Safety Health & Environmental advisor, HSE advisor, consultant, russian turkish speaker

Experienced Underground Blaster w/ 13 + years Experience in Construction/Quarry

Geologist

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Analitical, discipline, hard working, easy to learn, able to operate computer such as Microsoft windows, office, AutoCad, Photoshop, CorelDraw, Internet and maintenance computer

Associates Degree in Electronics Technology. No work expierience, graduated in 12/06. Ready to work!

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Rigger crane op scaf

Power plant engineer involved in a variety of power plant equipment design and commissioning.

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Six Sigma,Lean manufacturing practices,Capacity planning,Line balancing,Human Factors

Metallurgical Engineer Fresh Graduate, Metallurgist

DBA database administrator oracle, system analyst, programmer

Project Planning and Management, and Procurement / Purchasing

Human Resources, Project Management, Training, Engineering

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

I am a target oriented, highly motivated, hard working and communicative person, I have Leadership skill, I am speak English. In addition to the above qualification, I am also familiar with computer program and have the ability to work in team. I have an Experience In belt system maintenance and equ

Graduate chemical engineer (The University of Queensland), hardworking, quick learner and eager to learn with excellent communication and project & time management skills.

Mechanical technician - rotating equipment, pumps, compressors, heat exchangers, gas, petrochemical industry, valves offshore survival BOSIET. Hazardous area

I am a Diploma Holder specialized in Petrochemical Engineering seeking for a job(fresher).I am here with my bio-data for your kind perusal and I am request you to give me a chance for training in your esteemed organization,I will be grateful.

NDT

Chemical Engineer. 2 years experience in minerals refinery and processing plant with BhpBilliton Nickel West - Australia. Responsible in production on day to day basis. Familiar with pumping, mass and energy balance, hydromettalurgy, ball mills, hydrocyclones, Hysys, LNG, Gas sweetening process.

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

Very good analytical and project management skill. Do multi tasking and road warrior.

Professional mechanical and project engineer, conduting the maintenance and projects within heavy industrial environment blingual, planning, ‎budget control, Reliability, RCM, PdM, PM‎

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out