Resume - Project & Operations Engineer

Misco Jobs

Resume #11319

CONTACT INFORMATION:
View contact information...

EDUCATION
* B. Sc. Of Engineering-Electrical Power System Dept.
* Faculty of Engineering-Ain shams university-Cairo- Egypt– June 1999
* Graduation grades:
* Final year: V.Good-79%
* General grade: Good-73%

Graduation Project:
Electrical Power system planning and designing.
Design the network and its control and protection systems
Project grade: Excellent

* High School Diploma from Abu Dhabi Secondary School
* Abu Dhabi – U.A.E
* General Grade: 91% - June 1992

OBJECTIVE - To gain more experience through joining an organization with the faith of reaching a better career and position
- To make sufficient and productive use of my technical and professional skills in my field of study
- I have the ability to work under pressure and for a long time in a team and independently.
- Self motivated, good communication skills, able to work with different cultures and ready to be reallocated

PROFESSIONAL EXPERIENCE
* Current Job: Production Optimization Engineer.
* Hot Hed International - WeatherFord ALS.
* An international oilfield services company.
* From October 2003 till now
* Artificial Lift Systems (ESP, PCP and SRP)
* Job description:

* 1.Support Field service personnel with Technical support
* 2. Supervise Rig Site installation and testing.
* 3. Supervise a team of junior engineers.
* 4. Inspect and assemble ESP & PCP's, supervises and assists in the subsequent installation.

5. Set up surface equipment and insure system safety devices are installed and functioning. Start and monitor voltages, amperage, torque and production rates. Set operating parameters.

6. Pull and inspect ESP / PCP equipment, diagnose problems, make applicable field repairs.

7. Diagnose problems and recommend or implement appropriate solutions for surface problems.

8. Perform basic repair work on ESP / PCP's within defined limit of authority/expertise.

9. Perform and record checks on installed units at the well site, checking pump performance.
* 10. Troubleshoot downhole Problems and surface control Problems.
* 11. Use Variable Speed Drive to optimize the Production.

* Previous job:
* Oil & Gas Industry
* Field Production Support Engineer @ Baker Hughes Inc.-Centrilift
An international oilfield services company specialized in Artificial lifting systems.
From July 1999 till October 2003
Job description:
Production management systems and Optimization – Downhole Artificial lifting systems using Oil Pumps such as: ESP, PCP & ESPCP systems and their surface control systems, Downhole sensors and electrical power supplies.
Operations Duties:
Checks system design including insuring adequate HP and head lift, correct cable size and sufficient casing clearance, adequate surface KVA and correct size motor controller.

* Inspects and assembles all types of ESP brand submersible equipment, supervises and assists the subsequent installation of tubing and banding of cable, periodically checks system electrical integrity during installation. Also assembles wellhead.

* Checks calculation required surface voltage, designates proper transformer connections and wire size, sets up surface equipment and insures system safety devices are installed and functioning. Starts and monitors voltages, amperage and production rates. Sets operating parameters on surface controller.

* Pulls and inspects all types of ESP brand submersible equipment, diagnoses problems, makes applicable field repairs to equipment and cable, recommends appropriate action to customer.

* Diagnoses problems and recommends or implements appropriate solutions for surface problems including electrical problems, sand production, gas-locking pumps and insufficient fluid production.

* Performs more specialized electrical work including basic repair work on variable speed drives, trouble shooting down hole pressure systems, converting switchboard wiring from one type of motor controller to another; ( Keltronics, REDA )
* Perform and record checks on installed units at the well site, checking amperage and pump performance
Projects Duties:
1. Responsible for auditing and monitoring the Lump Sum Turn Key Projects Purchasing, Expediting, Material Control and Logistics activities. Procurement Quality Assurance and Quality Control coordinator

2.Review Safety, Health and Environment (HSE) Plans, including Hazard Identification Plan and Job Safety Analysis. Safety inspections of Storage facilities and construction site to detect and correct unsafe practices and conditions.

3.Review Inspection Assignment Packages for assignment of inspection responsibilities
4. Review Purchase Requisitions and Technical requirements to ensure that equipment and materials were being procured in accordance with Project Specifications and Industrial Standards
5. Review and acquired Drawings, Data Sheets, Specification Sheets and Equipment Manuals for incorporation into Project Record Books - Photostat Books, Inspection Record Books and Equipment Manuals.

6. Active role in HSE Inspections of Logistics Operations, Warehouse facilities and construction site
7. Supervise Material Control personnel. Reviewed material requirements generated by Contractors and coordinated with Project Team members to ensure validity. Purchased and expedited material requirement to meet Project Construction Schedule. Traffic Coordinator responsible for coordinating with Customs Brokers and Freight Forwarders to ensure timely clearance of equipment and materials from Ports of entry.
8. Responsible for developing and implementing Material Control Procedures for the Project; inspected, inventoried, issued, receipt and stored Electrical and Mechanical equipment and materials.
9. Responsible for safety inspections of all warehouse facilities, equipment and training of personnel in Safety Operation. Held weekly Safety Meeting with personnel
Field Support Job:
1.Supervise the Installation, commissioning, troubleshooting, maintaining and repairing electrical submersible pumping systems( ESP,PCP,ESPCP)
2-Implement String assembly which consists of (pump, gas separator, seal section, down hole motor and electrical power cable)
3- set the settings for motor controller ( GCS and Centrigaurd )
4- Install, overhaul, commission, troubleshoot, maintain and repair electrical, electronic, pneumatic, mechanical and analytical instrument and control systems of the downhole tools that are used in wells survey.
5- Familiar with replacing electrical & electronic components, soldering techniques and wiring.
6- Work may be performed on site or in workshop and includes evaluating, diagnosing and rectifying system faults.
7- Field recording and instruments testing by special software.
8- Working on offshore & onshore rigs.
9-Electrical power cable Splicing and termination with Subsurface connectors.
10-Install the surface control system which consists of: (transformer, switch board, junction box, variable speed drive, control systems and main power source )
11- Field service quality coordinator.
12- Well testing and observing the dwonhole equipment performance.

Office JOB:
1. Design the downhole string and surface control system using pump designing software.(Autograph)
2. Issue quotations and Prepare contracts.
3. Execute marketing research to determine customer's requirements and
4.Promote the Company's products/services
4. Handle any complaint from customers and response to solve it.
6. Gather marketing information, including prices, discounts and market regulations.
7. Prepare all documents and technical reports related to pulling out, installations for wells operation.
8. Study the well condition from the well history data and set proper procedures for collecting high quality flow test data.

9..Quality control and Quality assurance for all equipment and tools
10. Material coordinator: Develop and maintain an Inventory management system and oversee the implementation of the system via detailed procedures that ensures optimum holding of stock of material.
11.Customer support.

On Job Training 1998: Egypt Air – Cairo international Airport- Aug – Sept 1998
I have trained in the maintenance dept.
Hands on experience in control systems, protection systems and welding operations skills Computer:
MS Office (Word, Excel)
AutoCAD14, Hardware maintenance.

LANGUAGES:
Arabic: Mother tongue
English: Very Good Written and spoken

CAPABILITIES:
Capable of presenting and promoting your work to both technical and non-technical audiences.
Able to demonstrate problem solving and analytical skills.
Able to show a critical understanding of technical equipment.
Committed and motivated with the ability to remain calm under pressure.
Capable of effectively organizing your work and of managing the work of others
Courses attended:
1- ESP installation and application
2- PCP installation and application
3- HSE and Fire fighting.
4- Calibration and testing (on site training)
Countries Traveled to:

Italy,Turkey,Libya,UAE,Jordon,Saudi Arabia and Qatar

Salary Negotiable
Basic + Bonus + Benefits

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 1025)

Go to Search Parameters...

Brief Description

Senior Geologist with 9 years experience in many categories of geology( oil, mining & water ), graduated at May1999 (Geology-Chemistry), Faculty of Science, Cairo University, then high studies at 2001 (Sedimentology), Faculty of Science, Cairo University-Egypt, and high studies at 2004 ( Geophysics,

I am looking job in Australia, Canada & UK. I have 8 years experience in Administration Department. I can run an organization Individually.

I hold a Bachelor degree in commerce. Beside my sound academic record I have a diploma in business electronics data processing and currently pursuing Masters in Financial Management.

B.Tech (Electrical and Electronics)

Seeking a challenging position in the field of Geology GIS, Remote Sensing, and Image Processing

I like to classify myself as an equipment operator and or truck driver. I have a class B CDL liscence allowing me to drive single vehicle commercial trucks. My Highest level of expierience is on track type excavators, yet i can operate various other types of heavy equipment.

Journeyman electrician, field camp experience, supervisory experience, controls experience, cleared

SAP, Business Analysis, ERP, Project Management tools, Full life cycle implementation, Reporting tools, Documentation, End User Training

Seismic Processing Geophysicist

6 years of Network Administration and Operations Management

Pump Man

Instrumentation technician, control systems engineer, mining technologist

• Thorough understanding of test methodologies and procedure in working as a Production Engineer

Having worked for federal and state agencies throughout college, I developed in-depth knowledge of environmental and geophysical techniques and methodologies.

Installed and maintained the electrical wiring infrastructures that supply Light, Power Air conditioning and Refrigeration.

Electrical control Engineer

Experienced Executive Recruiter currently in the process of becoming a certified oil & gas landman. Open to opportunities anywhere in the U.S. (especially interested in LA, MS, & TX). Will also consider relocating overseas for an incredible opportunity.

HSE

Quick learner, able to work in a face paced team environment, attention to detail and thoroughness.

Free! Mine Superintendent, Expert epuipment operator

Experienced, highly skilled, hands-on professional with superior interpersonal and communication skills seeking a long-term position which will make use of his laboratory, refinery processing and manamgent background.

Class 3 Licence Operator with Airbreak Endorsement, safety certificates, experience in Oil Field and Construction Equipment.

I completed a B. Tech degree in Environmental Health at Peninsula Technikon. I also completed short courses in Environmental Management, HACCP, and Audiometry. I did my experimental training at the Worcester Municipality, Worcester Abattoir, and Maitland Abattoir.

Shotfirer / Blaster. 4 years experience in open cut coal mines. Queensland Shotfirer ticket, S1, S2 & S3. Generic industaion. SSAN clearance

MSc Applied Geology with specialization in RS and GIS Plus 2 Computer Diplomas of 1 yr duration each.

I have experience in researching well and lease records for petroleum prospect mapping and in well site services/ mud logging.

Registered as Professional Civil engineer 2124-11 in Engineers Australia

CPR certified, type 50-60 wpm

Mechanical Engineer (B.Sc. - Istanbul Technical University - ABET accredited university), Strong command of English, Occupational Safety and Health engineer, Pipeline engineer, Member of ASME, National & International work experience, Good communication & social skills, Result oriented work approach

B.E(Electrical Power) Engineering, A good skill in production and maintenance of electric transformers and consultant on Quality Management System(ISO 9001)

Sales, Customer Service, Accounting and Administration with 6 years of experience in Multinational Companies, Banks & Large Organizations in INDIA and ABROAD.

Experienced mining engineer, mine layout and design, design and scheduling of waste stockpiles, roads and utility planning, drill and blast layouts, scheduling, short term planning and project work

Just graduating with a B.S. in Geology. My degree includes a large portion of field work, including: vibracoring modern sedimentary environments (St. Croix, U.S.V.I); studing deformation of the Cumberland Overthrust; hydrology work. I am a quick learner and hard worker.

Field service engineer (diesel gensets)

I HAVE 4 YEARS OF EXPERIENCE FROM THE MILITARY AND 3 YEARS OF EXPERIENCE CONTRACTING IN KUWAIT AS AN ELECTRONICS ENGINEER

uranium processing,ground water analysis,lab operation

Holder of BMin.Sci with 2 years experience in the copper mining industry and is conversant with various mineral processing, hydro, and electro-Metallurgical processes.

Oil field,heavy equipment operator,driver

Project & Operations Engineer

Punctual, diligent, detail-oriented. Superior oral and written communication, organizational and time management skills. Demonstrated expertise in data collection and reporting, statistical analysis, and trend identification. Expert with Microsoft Office applications

Talented mechanic seeks overseas assignment

Washington Class A Commercial Drivers Licenses with Air Brakes Endorsements: Doubles/Triples, Tanker, Hazardous Material

Warehouse, forklift, labor, some machines operator,

I bring a wide range of Contract Administration experience with me as well as specific experience suited to International positions. I have a keen ability to follow policy and strive on ensuring 100% compliance to my employer.

Proven capabilities in HSE supervision and training: this includes heavy construction, onshore & offshore drilling and diving with an assertive personality sensitive to multicultural & multi-national environments with the ability to work and train workforces in remote and harsh environments.

IT expert, Helpdesk Support, Server Administration, IT Manager

Bsc Honours (Geology), BSc (geology, Zoology, Chemistry); Exploration/Resource Geologist with varirty of skills, such as Datamine, InTouch, ArcGIS, Surfer, GeoDatabase Management

BSc Electrical Engineer; PLC Programmer, Maintenance Engineer, Production Manager

MBA Industrial Managemant, MSc Engineering and Graduate in Mechanical engineering, Experience in CAD/CAE - Finite Element Analysis and Modeling using MSC Nastran, Patran and Hypermesh

I am a holder of a BSc Honors Degree in Mechanical Engineering and have 3 years working experience as a Mechanical Projects Engineer in Heavy engineering, materials handling aresearch and development and in a Petrochemical Industry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out