Resume - A dynamic Electrical Engineer, with a diverse range of experience in the Power G...

Misco Jobs

Resume #13918

CONTACT INFORMATION:
View contact information...

PROFILE:

A dynamic Electrical Engineer, with a diverse range of experience in the Power Generation industry. Able to work on own initiative and as part of a team. Capable of quickly adapting to ever changing technologies. Flexible committed individual with excellent interpersonal and communication skills. Possesses excellent computer skills and dedicated to maintaining high quality standards.

KEY SKILLS:

Good time and organizational management skills
Proven ability to manage team of operation and maintenance
Comfortable to work in multicultural environment

ACHIEVMENTS:

Member of a Sr. Engineering team with responsibility of training and fault rectification in all electrical and electronic system
Current responsibility of 25 staffs

CAREER HISTORY:

09/2002 – date: Assistant Engineer (Acting head since August 2003)
PHP Power Generation Plant Ltd, PHP Group, Chittagong

Responsible for operation and maintenance of two 7.7 MW industrial gas turbine (Tempest) generator set and 33/11 KV substation.

Supervising installation of indoor equipment e.g. 11 KV switch gears, AC/DC distribution panels, Generators and gas turbine control panels, Gas compressors, instrument air compressors and their associated control panels
Supervision of laying and Termination of high and low voltage Cable, Control Cable & Signal Cables
High Voltage Test of Switchgear Panel including VCB (VMX Type) and Main Bus bar, Testing DC Control of switchgear with interlock and remote operation.
Commissioning of all the panel i.e., Motor Control Panels, Battery Charging Panel, AC/DC Distribution Panel, Neutral Earth Resistors, Soft Starter Panel, Variable Speed Drive (Soft Starter) of Turbine Starting Motor, 11 KV switchgear, 2500, 1000 & 100 KVA Transformers etc.
Entry-level diagnostics, troubleshooting and repairing malfunctions in the electrical systems and components.
Primary & secondary injection test of protection relays.

07/2001 – 08/2002: Electrical Engineer
Alam Electric, Chittagong

Responsible for

Supervision of installation of high and low voltage transmission line, transformer, switchgear, P.F.I. unit etc.
Electrical systems repairer supervision.
Preparing tender documentation and quotation.
Inspection and maintenance of electrical and electronic systems.
Entry-level diagnostics, troubleshooting and repairing malfunctions in the electrical systems and components including solid state and transistorized subsystems.
Performing maintenance, modifications and alignment of electronic and mechanical devices.
Maintaining records on all electrical subsystem
Using and performing operator maintenance on common and special tools
Preparing forms and records related to skill and performing duties commensurate for preceding skill.
Providing technical guidance to subordinate personnel
Schedules maintenance on test, measurement and diagnostic equipment.

02/2001 – 06/2001: Assistant Engineer
TCIL, Dhaka

Responsible for

Inspection of respective feeder & sub-station (Stadium 5, Khulshi 1&2)
Inspection of distribution networks, Transformer & switchgear, service connections, metering systems
Inspection for evidence of Tempering & Pilferage
Observing BPDB billing systems and its effectiveness
Assessing the rehabilitation work involved in the conversion of the consumer to pre-paid metering
Providing technical guidance to subordinate personnel
Maintaining records of the survey work
Preparing forms and records related to skill and performing duties commensurate for preceding skill

TRAINING:

Successfully completed on site training course conducted by Siemens Power Generation O&M. Courses includes plant familiarization and operations, preventive maintenance etc.

Skill Acquired:

Basic operator principles
Inspection of Compressor and turbine blades using Borescope
Combustor Dynamics
Generator Training
Integrated plant operational analysis
Plant chemistry and Performance
Thermal Island Preventative Maintenance
Trouble shooting using PLC (RsLogix5000, Simatic S7)
Instrument calibration (PT, RTD etc.)

EDUCAION & QUALIFICATION

BIT, Chittagong
1993 – 1997
(Final exam held in 2001) B. Sc in Electrical & Electronic Engineering
Final year project: "Design, construction and performance test of Instant Power Supply (IPS) System"

@ Associate member, Institute of Engineers Bangladesh

Chittagong College
1990 - 1992
Higher Secondary Certificate
Mathematics, Physics, Chemistry, Biology and English

Chittagong Govt. High School
1988 - 1990 Secondary School Certificate
Mathematics, English, Physics, Chemistry, Biology, Geography

TECHNICAL EXPERTISE

Operating Systems:
MS DOS, Windows 3.11, 95, 98, Me, 2000 & XP, Windows NT

Business Software:
MS Word, MS Excel, MS Power Point, MS Access, MS Publisher, MS FrontPage, Lotus Notes

Engineering Software: PS piece, Circuit Maker, Radio Micro log, AutoCAD 14, AutoCAD 2000

Programming Language: FORTRAN 77

PLC Controls: Contrologix

HMI Controls: In touch Window Viewer and maker

VSD Drives: ABB ACS 600, Siemens Simoreg

Controls Software:
Rockwell Software: RSLogix-5000, RSLinx, RSNetworx for Control net, RSNetworx for Device net
Siemens Software: Simatic S7 300 & 600.

PERSONAL SUMMARY

My personal interest and hobbies include; playing cricket, chess, love to listen music and surfing net, keen to travel new places and most of all true reader

29 years of age, single
Punctual, motivated, highly organized and competent individual
Prepared to relocate and participate in company functions
Excellent health

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1025)

Go to Search Parameters...

Brief Description

Technical Writer / Editor and Proposal Writer

Mining engineer with special passion for drill and blast operations but experience of many aspects of contemporary mining/rockworks operations. International experience and excellent language skills.

Five-year experience in metallurgical projects from the Gold and Nickel industry. Two-year plant and pilot plant experience. Speak, read and write English and Chinese (Mandarin). Familiar with pressure leaching at high temperature.

Safety specialist, tertiary trained, extensive experience,

Working in the Safety and Environmental for the Manufacturing, Oil and Gas and the Wind Industry

Project Manager, Civil, Geotechnical, Offshore, Engineer, Mining, Oil & Gas, Pipeline

Instrumentation and Controls Engineer

A dynamic Electrical Engineer, with a diverse range of experience in the Power Generation industry. Able to work on own initiative and as part of a team. Capable of quickly adapting to ever changing technologies. Flexible committed individual with excellent interpersonal and communication skills. Po

Having 11 years experience in electronic, electrical and mechanical system and instrument related breakdowns, up gradation and project work as a technician. Recently get Australian Permanent residential visa on 3 rd Feb 2008.

Bachelors of Science in Chemistry minor in Hydrogeology

oil and gas background related to the upstream and downstream operations field.

Basic Refractory Research & Development Engineer,

Indonesian university graduate who want to exceed carrier in Australia. 10 years working experience, and willing to work as a operator. ISO 9001:2001 qualified and also can speak Japanese fairly

SAP PM Functional Specialist Qualified, BS in Industrial Technology, Extensive maintenance background, a total of 18 years including 8 years SAP experience in PM Module. Sound understanding of other modules interfacing with PM such as HR,FI/CO,PS and MM.

Project Manager that gets it done

10 years Experience (Process Instrumentation & control sys. Engineer) at chemical industries (Hazardous area) and water treatment projects-Installation, testing, commissioning, operation, monitoring, modifying & maintenance for new projects-Check & review vendor proposals, doc. & drawings

Msci geology first class degree, 5 months experience in petroleum industry, looking for a grauate exploration role in Perth, Australia. Very enthusiastic about geolgy and mining industry in Australia.

Working for about 9 years with multinational construction companies and consultancy firms in large scale international projects is my solid base upon which I became a Professional Civil Engineer. Aware by Quality and Safety Management Systems, Civil Engineering International Codes and standards.

I am a qualified Metallurgical Engineer with quality and intensive training and education in Mineral Processing and Extractive Metallurgy. I am very adept in the analysis and problem solving of comminution circuit design, process control and Hydrometallurgical processing problems.

An energy lawyer with work experience in legal research/administration, and training in international oil & gas contracts, negotiations and project administration. Has excellent interpersonal and communication skills and able to work creatively in a problem-solving and result oriented environment

Territory Sales Manager, Marketing Manager & Regional Manager

With 20yrs of my experience, I have developed a sound background in infrastructure civil project and management, methods and procedures, which includes Commercial & Residential buildings, Roads, bridges, Tunneling, Dams, Environmental Remediation and Extensive Construction Quality Assurance/Quality

Quality engineer

Heavy equipment mechanic/welder

Fourteen (14) years of progressively responsible experience in logistics, procurement, warehousing, and supply chain management along with fourteen (14) years experience in technical & electronic maintenance.

Senior Piping Designer/Construction Engineer - office and field

highly-motivated and enthusiastic person having an analytical eye and logical mind

Experienced Windows 2003 engineer. Exchange 2003, Active Directory, Group Policy, DNS, DHCP, BackupExec, Brightstor, Cisco, HP h/w, Viruscan, E-Trust, EPO.

Motivated and dynamic quarry manager with excellent technical understanding and strong business focus. 3 years experience of UK hardrock quarrying, asphalt & concrete plant operations. Master of the Camborne School of Mines & Member of Institute of Quarrying. Intern. exposure with 'can do' attitude

Demonstrate ability to effectively and efficiently provide professional HR services and guidance to employees and managers

HVAC TECHNICIAN

CDL Class A, HazMat/Tanker Endorsement, Medical Cert./DOT Physical, MSHA 5000-23 for Hitachi/Euclid EH 1700, CAT 777D, 769D, Volvo A40D, Forklift Operator Cert., North Slope Training Card, Red Cross First Aid/CPR Certified

Work experience as a Mechanical/Maintenance Planner in Nuclear Power and Gas/Oil industry. Utilized SAP, Maximo

Electrical Engineer with 8 years experience in the telecommunications field.

I have the U.A.E residence and work permit. - I am confident and extremely professional with about 7 years of experience working as a procurement , project engineer and commercial Coordinator in Oil, Gas, Petrochemical, Metal and Mining industries.

Foreman, Surveyor and Team Leader, Civil Construction Supervisor

Journeyman Heavy Duty Mechanic/Technician, Red Seal Certification, Strong leadership, mentoring, advisory skills, can work independently providing high maintenance and repair standards on electronically controlled diesel and hydraulic systems on all types of stationary or moblile equipment.

More than 12 years in welding inspection job (CSWIP 3.1, ASNT Level II IN RT, PT, UT and MT)

In my previous job I started with no knowledge of the marine industry but in the space of 3 years I earn the respect of my fellow works. I made team leader and became trusted enough to be sent by myself to foreign countries to marine fit outs. I am fast leaner and able to do long hour.

Geologist/Engineer, 12 years in mineral (exploration, development) and MIS engineering. Degreed in both. Team oriented project support, drill program management, data interpretation. Involvement: four mine development projects and information technology. Desire a contract or permanent position.

all taype electrical and electronic maintenance

I am a very versatile, adaptable and innovative professional with many years of experience in installing machinery, training customers. Extensive fault finding experience in hydraulic systems, and pneumatic systems. Good analytical and logical problem solving skills to facilitate project completion

Well-versed in GIS principles and technologies. Proficient in ArcGIS (ArcMap, ArcToolbox, ArcCatalog, ArcInfo) and extensions (Spatial Analyst, 3D Analyst, ArcScene), ERDAS Imagine, R2V Conversion, MS Office, and PC operations.

I am geologist technician with 3 years of experience. I want to develop my skills in formation evaluation, rock characterization and special core analysis techniques. My special interest is renewable energy sources, especially geothermal energy. Working in a company with HSE principles is important

Proficiency in CAD/CAM software’s: Unigraphics(CAD/CAM), Pro-Engineer, Catia, Solid Edge, Autocad, Product Data Management(PDM), Solid Works, C & C++ programming languages, Ms-Office

M.S in Industrial Engineering & Bachelor's degree in Mechanical Engineering. Key skills include computer-aided design & simulation, customer service & Support, operations management. Permanent Resident in USA (can work for any employer)

Mechanical Supervisor / Project Manager

Equipment Operator, Skilled Laborer, Heavy Equipment Operator, Construction work, Quick learner, Landscaping, skid steer, excavators, loaders, plow truck driver, plow snow,etc.

I have graduated master degree from the University of Indonesia Jakarta, Faculty of Computer Science, majoring in Information Technology (GPA: 3.05, in scale: 4). I sincerely believe that my knowledge, abilities, creativities, and independent attitude would be a valuable asset to your organization.

B Tech in Electronics And Instrumentation

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out