Resume - Graduated 09/2004 in Master of Science (Mechanical Engineering) from The Univers...

Misco Jobs

Resume #20887

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To seek the post of Design Engineer or Mechanical Engineer. To be involved in optimizing designs of machines or systems for optimum performance. To contribute significantly to the growth and profitability of a dynamic organisation that is constantly innovating and pushing the envelope.

HIGHLIGHTS OF QUALIFICATIONS
* Graduated in September 2004 from The University at Buffalo (UB), The State University of New York with a Master of Science in Mechanical Engineering.
* Completed a thesis at UB in decentralization of the design of complex systems.
* Eight years experience in facilities management at the 800,000 m2 floor area campus of the National University of Singapore (NUS).
* Strong project management and research skills.
* Wrote nine articles for Singapore's top english daily, The Straits Times.
* Active in outdoor activities and community service.

RELEVANT SKILLS AND ACCOMPLISHMENT
MS coursework
* Optimization in Engineering Design
* Heuristic Optimization
* CAD applications
* Composite Materials
* Graphics in CAD
* Cryogenic Process Engineering
* Engineering Procedure Writing
* Technical Communications for Engineers

Optimization of Engineering systems
* Used Method of Feasible Directions, Sequential Linear Programming, and Sequential Quadratic Programming to optimize design of a water reservoir system [UB].
* Employed Genetic Algorithms to study decentralized optimization of complex systems for MS thesis. Details at http://home.eol.ca/~jochebel/new_page_2.htm.
* Used Genetic Algorithms to optimize design of a Joule-Thomson cryogenic cooler [UB].
* Used Simulated Annealing, Random Search, and Enumerative Search to optimize design of water distribution network [UB]. Details at http://home.eol.ca/~jochebel/new_page_3.htm.
* Applied MS Excel's optimization software, Solver, in problem solving [UB].

Computer Skills/Knowledge
* Extensive C and Fortran programming experience [UB].
* Simulated the driver's view of a futuristic vehicle using OpenGL and C [UB].
* Used X-Windows and C to write a rudimentary CAD software [UB].
* Modeled the operation of a 1.5 million gallon water reservoir using MS Excel [NUS]. Details at http://home.eol.ca/~jochebel/new_page_4.htm.
* Used the software PROMAL to conduct stress and strain analysis on composite materials [UB].
* Used ProE to analyze the vulnerability of the Golden Gate Bridge to a terrorist explosion [UB].
* Used ProMechanica and ProE to analyze the motion of a crank rocker [UB].
* Used ProE to conduct static stress analysis of a 3D cantilever beam [UB].
* Applied AutoCAD Release 13 to draw the water pipes layout on a pre-existing AutoCAD drawing of the NUS campus [NUS].

Project Management
* Worked with consultants to plan the replacement of a 1.5 million gallon water reservoir costing US $2.9 million [NUS].
* Coordinated with consultant, contractors, and stakeholders to replace the NUS' fire protection system costing US $9 million.
* Wrote, tendered, awarded, and monitored onsite the contract for laying 3 miles of 12 inch diameter water pipes costing US $0.9 million [NUS].

Supervision/Teamwork
* Revamped a 30-man maintenance team to create a flatter hierarchy; reduce response time to customer's request; and increase staff accountability and skills range [NUS].
* Interviewed, hired, and developed staff in frontline maintenance of plumbing and sanitary systems, and fire protection systems [NUS].
* Worked with consultants and contractors in upgrading of existing office space [NUS].
* Collaborated with fellow UB students in project work.

Technical Communications
* Wrote level one, two, and three ISO 9000 manual for a fictitious automobile company [UB].
* Wrote the proposal to replace an ageing water reservoir in a university campus [UB].
* Conducted research and made a presentation to fellow students on the application of ISO 14000 in the workplace [UB].

Community Service/Activities
* Prepared breakfast for homeless people in a soup kitchen in church-based "Out-of-the–Cold" program (Toronto, Canada January 2004).
* Spent a day helping to construct a house for Habitat for Humanity at Fort Erie, Canada (Summer 2003).
* Acquired Wilderness First Aid certification at UB (Fall 2002).
* Member, South Niagara Adult Rowing League, Welland, Canada (Spring 2002).
* Volunteered three months onboard a humanitarian aid vessel, MV Doulos, and worked in the ship's bookstore (1992-1993).
* Attended 24-day Outward Bound program in New Zealand (1990).

EMPLOYMENT HISTORY
03/2003 – 09/2004 Part-time Translator Citizenship & Immigration Canada, Canada
12/2002 – 09/2004 Part-time Tutor Self-employed, Canada
03/1993 – 05/2001 Facilities Manager National University of Singapore, Singapore
11/1992 – 02/1993 Volunteer Operation Mobilisation, Singapore
02/1992 – 10/1992 Free-lance writer Self-employed, Singapore
02/1991 – 01/1992 Research Officer Ministry of Defense, Singapore
07/1989 – 11/1990 Engineer Public Utilities Board, Singapore

EDUCATION
* Master of Science (September 2004), Mechanical Engineering, The University at Buffalo, The State University of New York, Buffalo, New York, US. GPA: 3.523/4.0.
* Bachelor of Engineering (June 1988), Mechanical Engineering, The National University of Singapore, Singapore.

NOTES/OTHER INFORMATION
Willing to travel or relocate. References available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 1116)

Go to Search Parameters...

Brief Description

Good time management, ability to work with or without supervision and a working experince in a oil and gas industry

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I have ability on heavy duty equipments operation,fms dispatch system using high technologies,mine supervision as well.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

International Safety / Risk Professional available for fulltime or contract employment.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

Blueprint Reading - Mig, arc and gas welding

Have good knowledge of the principle, practice and procedure of geology. Familiar using a personal computer with Mapinfo, Microsoft Office, Microsoft PowerPoint, and email / internet systems. Fair in English , both oral and written.

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

BE in Mechanical Engineering.

Maintenance Technician

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Catia V5, Unigraphics, Pro-Engineer, Solid Edge

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Seven years of hands on mining experience in surface and underground mining of rock salt, silica sand, high alumina clay (fire clay), and limestone

Good Mam/ Sir My name is Denver Moodley. I am a qualified Advanced Life Support Paramedic working in Africa for International SOS remote site projects. I am keen to explore the option of Contract work with better opportunities and would be grateful if you consider my placement in one of your remot

I drive a fork lift and i can use power tools and i have my mine safety pappers

Comupter And Office applications, Microsoft word proficiency,Good analytical skills

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

My huge experience in oil& gas petrolium sector allowed me to to postule to several postes of job, have graduate from assisatnce untill attend the degre of supervisor gives me more knoweldge & ability to deal with almost offers, able to work under strong envirment and pression

Security, life support, camp management, logistics

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Technical Writer / Editor and Proposal Writer

Mining engineer with special passion for drill and blast operations but experience of many aspects of contemporary mining/rockworks operations. International experience and excellent language skills.

Electrical engineer (2 years experience),researcher(1 year experience)

Five-year experience in metallurgical projects from the Gold and Nickel industry. Two-year plant and pilot plant experience. Speak, read and write English and Chinese (Mandarin). Familiar with pressure leaching at high temperature.

Sr.Chemist / Chemist , Quality Assurance / Control , Researching and Development, Production Supervisor Or eq. Position.

I am a motivated graduate with qualifications in Geological Engineering, Applied Petroleum Geoscience and Quantity Surveying and I am proactive, confident with excellent communicative skills. I am flexible in my approach work, accurate and punctual. I am focussed and motivated with eye for details

I am a trained geologist with HSE certificate and willing to relocate and work under challenging conditions

Safety specialist, tertiary trained, extensive experience,

I am a seasoned QMS Internal & External Auditee, a trained QMS Internal Auditor and Document Controller, currently managing the implementation of ISO 9001:2008 (QMS) for a company in Nigeria. I have over five years experience in both Oil and Gas industry and Insurance Company working as document con

Project Manager, Civil, Geotechnical, Offshore, Engineer, Mining, Oil & Gas, Pipeline

Instrumentation and Controls Engineer

I am Mining Engineer with good educational background. I have ability to handle any assigned task by my senses of brilliant.

I have worked in the construction field for the past 11 years in every element mother nature could throw at us. I also have alot of experiance with the day to day up keep of tractors and large trucks, and some wielding/fabricating work aswell.

A dynamic Electrical Engineer, with a diverse range of experience in the Power Generation industry. Able to work on own initiative and as part of a team. Capable of quickly adapting to ever changing technologies. Flexible committed individual with excellent interpersonal and communication skills. Po

Recently graduated with a Bachelor Degree in Business Administration (5/2007). Worked at Bisco Industries as a Management Trainee/Sales, 11/2007 – 07/2009.

Free! Esri Software Senior Developer

I perform a variety of duties as well as working in a collaborated team player environment; 3 plus years of experience in clerical work as well as Customer Service work; Ensure that the necessary quality records are specified, generated and controlled in accordance with the appropriate procedures;

Indonesian university graduate who want to exceed carrier in Australia. 10 years working experience, and willing to work as a operator. ISO 9001:2001 qualified and also can speak Japanese fairly

Senior manager with extensive experience in the development and management of information technology and data communications operations. Skilled in designing, building and operating wireless networks. Excellent background in the integration of multiple technologies in a single network platform.

SAP PM Functional Specialist Qualified, BS in Industrial Technology, Extensive maintenance background, a total of 18 years including 8 years SAP experience in PM Module. Sound understanding of other modules interfacing with PM such as HR,FI/CO,PS and MM.

I have work experience in both engineering and sales fields for almost 2.5 years. I’m bachelor degree in mechanical engineering also graduated from energy engineering.

Earned Bachelor's in Geology from the College of Wooster in 2008. Conducted extensive field and lab research while completing degree that culminated with a detailed research thesis. Attended Indiana University Geologic Field Station in the summer of 2008.

Secure a position within the maritime industry that will benefit from my excellent technical, professional and leadership skills as well as my education and license qualifications.

Office Support Personnel ; Construction Material Controller ; Information Tech. Degree

Working for about 9 years with multinational construction companies and consultancy firms in large scale international projects is my solid base upon which I became a Professional Civil Engineer. Aware by Quality and Safety Management Systems, Civil Engineering International Codes and standards.

MS- DOS, Windows 9x, Windows XP, Windows 2000 Professional, Windows 2000/2003 Server, MS- Office 2007, Open Office, MS Outlook, Outlook Express 2003, Adobe Indesign, Photoshop

I am a qualified Metallurgical Engineer with quality and intensive training and education in Mineral Processing and Extractive Metallurgy. I am very adept in the analysis and problem solving of comminution circuit design, process control and Hydrometallurgical processing problems.

An energy lawyer with work experience in legal research/administration, and training in international oil & gas contracts, negotiations and project administration. Has excellent interpersonal and communication skills and able to work creatively in a problem-solving and result oriented environment

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out