Resume - A Senior Inspector with more than 20 years extensive offshore/onshore activity i...

Misco Jobs

Resume #31511

CONTACT INFORMATION:
View contact information...

QUALIFICATION
CSWIP 3.2 Senior Welding Inspector.
Petans Basic Offshore Survival & Fire Fighting Certificate.

CAREER SUMMARY:
A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries, who has developed the following:

Supervisor capabilities (up to 500 men- offshore hook up):
Clients Offshore Senior Welding Inspector
Clients Representative
Installation, hook-up and commissioning competence:
Welding, fabrication and construction skills:
Organizing and co-ordination flair:
Safety awareness and administration proficiency:
A sound knowledge of weld procedures and techniques:
The ability to liaise effectively at all levels:
[Certifying Authority, Health & Safety Executive, Clients, etc.]
A sound knowledge of Hydro and Gas Tests on Piping, Vessels, Valves and Xmas Trees [topside and subsea]
Clients inspector on lay barges and Construction barges

STRENGTHS:
Audit of contractors quality and contractual fulfillment.
Plan; Coordinate quality surveillance and inspection activities of subcontractors.
Vast supervisory experience on modifications/construction Maintenance
Adept at working to relevant standards and specifications

CAREER SUMMARY:
Senior QA/QC Inspector. [Feb 2005-Present]
Position: Lead Quality Surveyor [Oct 2004 – Dec 2004]
Senior Welding Inspector [Feb2004 - Sept 2004]
Vendor Inspector [Nov. 2000-Dec 2003]
Senior Projects inspector P&E [July 1999-July 2000]
QC supervisor/ Senior Inspector [May 1998- July 1999]
Senior Welding Inspector [Aug 1992-Jan 1998]
Welding Insp./Rad Interpreter [Oct 1990-June 1992]
Front End Welding Insp [June 1990- Oct 1990]
NDT Technician [Mar 1985 - June 1990]
Front End Welding Insp [March 1984-Nov 1984]

EMPLOYMENT HISTORY:
February - present Velosi UAE.
Position: Senior QA/QC Inspector. Piping/Welding.

Responsible for the supervision of contractor QC performance & reporting, on the Rasgas expansion project in Ras Lafan in Qatar UAE. I am employed extensively in the construction & testing of piping systems on the LNG plant train four. Train five is about to start. I am responsible to the senior RasGas QA/QC engineer & am active in the resolution of any non-conformances or technical queries.

October - December 2004. Velosi UAE.
Position: Lead Quality Surveyor.
Responsible for the supervision of the inspection team covering the installation / laying of 3 x 32" gas pipelines with 4.5" MEG smaller piggy back and 1 x 30" from shore to SBM All were shore pulls from
As-sahalaha Iran. Reporting to the senior Statoil representative on board, attending quality & progress meetings & resolving quality issues as they arise.

June 2004 - September 2004. Shaw P/Line Services Ltd.
Position: Senior Welding Inspector.
Onboard McDermott barge DB 27 in Qatar for the laying of two sub-sea pipelines on behalf of Ras Gas.
Duties include material receiving inspections end preparation & fit-up. Short term concluded successfully.

February 2004 - June 2004 SGS UAE. Ltd.
Position: Senior Welding Inspector.
SWI on the construction of a methanol plant on behalf of Fluor Daniel's integrated management team for Sipchem in Jubail, Saudi Arabia. Duties included but not limited to.
Hydro-testing of piping systems & vessels. Welding of structural buildings, (pipe racks etc.), piping systems, pressure vessels, tanks & towers. Inspection of coating/painting preparations & application of various coating systems. Left due to the civil unrest at that time.

May 2003 - September 2003 Moody Int. Ltd. UAE.
Position: Vendor Inspector.
Vendor inspector in the fabrication & testing of four, prototype 38" X 5,000Lb top entry twin piston ball valves, and other smaller valves for the Ras Gas expansion program. Duties included the witnessing of welding inconel 625 cladding, pressure testing, both gas & Hydro at differing pressures. Other duties included inspection of actuators for the valves already mentioned. This work lasted until the scope had been completed.

Nov. 2000 - Oct 2002 Moody Int. Ltd. Saudi.
Position: Vendor Ispector.
Working as vendor inspector mainly on behalf of Snamprogetti, Amec & Saudi techint. Responsible for all aspects of the following. Witnessing of the testing of various valves & pressure relief devices & releasing to site. Inspection of vessel fabrication, visual/dimensional, witnessing of hardness tests, heat treatment, positive material identification, blasting & coating operations, hydrostatic testing, compiling & reviewing fabrication as built drawings for final sign off and shipping to site. Specifications used ASME 1X, ASME-B-31.3. NACE etc.
Relocated to Jeddah overseeing the construction of pressure vessels at Zamil Heavy Industries, structural at Hidada, & valves at the Saudi Valve Company. Then moved to Dubai on behalf of Amec BKW SA Ltd. Then to Maritime Industrial Services in Sharjah as clients inspector during the fabrication of filters & filter separators built for Saudi Aramco.

July 1999 - July 2000 Saudi Consulting Services.
Position: Senior Projects inspector P&E.
On the fabrication of jackets & decks for Aramco by McDermott's Jebel Ali Dubai. On completion, relocated to the fire water upgrade project on Zuluf Gas & Oil Separation Platforms # 1&2 in Saudi Arabia. This work required the compilation of structural & piping packages normally done by the contractor. My duties included the supervision of QC personnel working for the contractor, auditing the radiographic department for acceptability & verify interpretation results. Standards used were ASME.B.31.3 & AWS. D1.1

May 1998 - July 1999 Shaw QED.
Position: QC supervisor/ Senior Inspector.
On board Allseas pipe-lay vessel Lorelay during the installation of sub-sea pipeline in the North Sea, doing QC & radiographic interpretation. The welding system was Phoenix Gold. Then transferred to McDermott barge DB27 as QC inspector during the installation of the north field Alpha accommodation jacket & module on behalf of QGPC in Qatar. My next assignment was offshore Iran as QC supervisor on board the Abouzar 1200 during the installation of jackets & decks in then South Pars upgrade project. I was also responsible for compilation of the packages at final acceptance sign off stage. Standards used were ASME IX & AWS.D.1.1.

August 1992 - Jan 1998 Vetco/Tuboscope.
Position: Senior Welding Inspector.

Seconded to Saudi Aramco off-shore projects inspection. My work included installation & hook-up of jackets & decks as already previously described.

April 1992 - June 1992 OIS Ltd.
Position: Welding Insp./Rad Interpreter.
Seconded to Stenna off-shore on the Apache spooling barge during the laying of small bore pipelines in the North Sea (Southern).

Sept 1991 - April1992 Rigblast Ltd.
Position Welding Insp/Rad Interpreter.
Assigned to various platforms, including the Brae A & B on behalf of Marathon Oil & on the 1947 on behalf of Brirish Gas. This work was all short term upgrade stuff on well head piping & vessels.

March 1991 - Sept 1991 OIS Ltd.
Position: Welding Insp/Rad Interpreter
Seconded to McDermott/ETPM on the Snorre to Statfjord A subsea 42" pipeline for Statoil on board the LB200.

Oct 1990 - March 1991 RTD Rotterdam.
Position: Welding Insp/Rad Interpreter.
Working for various clients in Holland, including Philips Chemicals, on shut down work on vessels. I was also employed on the running of welding procedures, (including mechanical) for work in the North Sea.

June 1990 - Oct 1990 Solus Oceaneering.
Position: Front End Welding Insp.
Employed on the Braishfield to Ower 24" high pressure gas pipeline on behalf of British Gas Southern. This work included hot-taps on 2 X 12" by-pass lines & subsequent testing.

Feb 1990 - May 1990 Industrial Inspection PTY.
Position: NDT Technician.

Employed on the erection of the MossGas refinery in Mossel Bay in South Africa doing radiography on pipe work & vessels.

May 1998 - Dec 1999 Mapel Ltd.
Position: Radiographer.
Seconded to Press offshore, doing radiography on topside piping, on the Montrose Alpha-Arbroath hook-up.

March 1987 - May1988 Arlis Inspection.
Position: NDT Technician.
Employed by resident inspection company carrying out inspections on piping & vessels at sub-contractors such as Thew Engineering & others.

March 1985 - Feb 1986 Arlis Inspection.
Position: NDT Technician.
Employed initially on the Catalytic cracker & then kept on until work requirement receded.

March 1984 - Nov 1984 Spencer & Partners
Position: Front End Welding Insp.
Engaged on short-term work in southern England & Wales on behalf of British Gas.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 1115)

Go to Search Parameters...

Brief Description

Geologist

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Quality dozer/blade/excavator operator in all aspects of construction

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Rigger crane op scaf

Catering Management

Project Control, Corporate Treasury, ERP Application Consultants

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Six Sigma,Lean manufacturing practices,Capacity planning,Line balancing,Human Factors

Metallurgical Engineer Fresh Graduate, Metallurgist

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

MSc in Management Finance,BS(Hons) in Business Administration, ACCA, CAT

Early career Supply Chain Management & Project Management Graduate

I am a target oriented, highly motivated, hard working and communicative person, I have Leadership skill, I am speak English. In addition to the above qualification, I am also familiar with computer program and have the ability to work in team. I have an Experience In belt system maintenance and equ

I am a Diploma Holder specialized in Petrochemical Engineering seeking for a job(fresher).I am here with my bio-data for your kind perusal and I am request you to give me a chance for training in your esteemed organization,I will be grateful.

Fire Fighter I & II (Accredited at SAESI), BAC (Registered at HPCSA)

Am a hard working and reliable person who displays a high standard of care and customer service, a person who is highly active, self motivated, keen to succeed and eager to learn new skills. Am good team worker and I know how to prioritise my work.

Administration, Marketing, Business Development, Operations & Computers

Chemical Engineer. 2 years experience in minerals refinery and processing plant with BhpBilliton Nickel West - Australia. Responsible in production on day to day basis. Familiar with pumping, mass and energy balance, hydromettalurgy, ball mills, hydrocyclones, Hysys, LNG, Gas sweetening process.

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

Oil & Gas Land Title, Leasing, Right of Way, Consulting & Reporting

Very good analytical and project management skill. Do multi tasking and road warrior.

Professional mechanical and project engineer, conduting the maintenance and projects within heavy industrial environment blingual, planning, ‎budget control, Reliability, RCM, PdM, PM‎

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have qualified N3 in 1998, I worked for Catterpillar and worked my self up to Service Manager, I've been a Group Plant manage, Currently working in the DRC on the Copperbelt as Maintenance Manager.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

Licensing, installing and configuring Windows Server 2003. Licensing, installing and configuring Active Directory. • Managing physical and logical disc. Configuring terminal services. Managing, monitoring and securing Windows Server 2003 resources. Managing user, group and computer accounts i

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Supervision, planning, scheduling, coordination, operation & maintenance (proactive & reactive), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities, Auto CAD, ISO 9001

Prepare MTO, BOM, electrical installation, electrical testing, E & I pre commisioning and commisioning

Advanced machine operator/ intermediate maintenace technican skills

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

I have a number of National Certificates some in Extractive Industries others in management and training. I ahve good communication and teamwork skills and first aid and risk assesment.

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

B2B Marketing, Product Development, Dealer Management, Market Research

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

I believe my experience in organization, projects and maintenance in the world largest methanol - petrochemical production site and other experience in foreign trade can help in implementation of your company's highest production, organisational and marketing standards.

Able to communicate well with people, and listen attentively/Effective troubleshooting, problem solving, and analytical skills/Mechanically inclined/Knowledge of Microsoft applications/Enjoy taking on new and challenging tasks/Establish effective working relations with co-workers/

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Repairs, servicing, maintenance of electronic systems

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Tehnical Skill: able to fix trouble shooting such as : Hydraulic, Electric and Power Train system of heavy equipment. Abel to manage more then 250 people subordinates

Sr. Health & Safety Engineer - OHS Procedures, Training, Inspection, Audit; HSE Plan, Objectives, Matrix etc.

2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.

Good time management, ability to work with or without supervision and a working experince in a oil and gas industry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out