Resume - Geology & Mining Engineering Degrees; Underground and Surface Experience; Profes...

Misco Jobs

Resume #34169

CONTACT INFORMATION:
View contact information...

SYNOPSIS OF EXPERIENCE

Worked for mining consultants, major and junior mining companies.

* Reporting of resources/reserves according to NI 43-101
* Creation and maintenance of geologic resource block models, model updates, and resource estimation using Minesight, Vulcan and Gemcom.
* Mine geology (grade control, exploration and mapping) in underground and surface mines.
* Short term mine planning.
* Blast planning and design.
* Weekly and monthly mine and mill reconciliation.
* Precious metal and base metal exploration (grass root projects to definition drilling in existing mines).
* Consulting work in the diamond exploration field.
* Rock mechanics in convergence prone underground mines.
* Geotechnical ground and roof support investigations.

EDUCATION

1990 Master of Science: Geological Engineering, Emphasis: regional structural geology and tectonics, deformational history of mineral deposits, mineral exploration, fault related igneous activity University of Alaska, Fairbanks, School of Mineral Engineering, Department of Geological Engineering/ Mineral Exploration

1981 Bachelor: Mining Engineering, Emphasis: Rock mechanics, brittle deformation, underground road convergence, rock bursts Technische Fachhochschule Georg Agricola für Rohstoff, Energie und Umwelt zu Bochum, Germany,(University of Applied Science - Mining, Energy and Environmental Science, Bochum, Germany)

MEMBERSHIPS AND CERTIFICATIONS

Qualified Person after NI 43-101,
American Institute of Professional Geologists,
Professional Geologist registered with the State of Alaska,
BDG, Germany

RELEVANT WORK EXPERIENCE

07.07 – present Senior Mine Geologist (Chief Modeler)
Maintain and advance the computer model of a 40,000 ton/day open pit gold mine using MINESIGHT modeling software. Update the geologic model from ongoing exploration drilling. Develop pit optimizations using Lerchs-Grossmann or Floating Cone routines. Generate or update resource models of satellite ore deposits along the mineralization trend. Reconcile monthly production figures with the the exploration model, blasthole model, production numbers and reported mill tons and grades. Create resource and reserve figures for corporate end of year reporting.

02.06 – 06.07 Manager, Geotechnical Services
Modeling of Bullion River's underground narrow vein gold deposits using Vulcan resource modeling software. Prospects are former or current mines and projects of different development stages. Permitting oversight of mining operation

05.-05 – 02.06 Resource Engineer
Implementation of reconciliation procedures in this rehabilitated open pit gold mine. Block model set-up and maintenance including mine database administration. Aiding in general start-up procedures. Establishing short-term mine planning schedules. Designing of blast patterns. Conducting ore control with daily grade and tonnage tracking and mill reconciliation.

06.04 – 05.05 Quality Control Engineer
Identify ore/waste boundaries within blast patterns based on blast hole assays. Calculate bench grade and tonnage. Update block model using Gemcom. Identify and flag ore zones in the field for mucking activities. Collect grade control samples of muck faces, crusher belts and leach pads for reconciliation. Compile monthly grade control reports including drill progress, blast sequence, ore and waste tonnages mined, grade distribution of different rock types and reconciliation of actual, grade control and reserve models. Monthly royalty distribution preparation.

02.02 – 06.04 Project Engineer/Geologist
Plan and perform geotechnical assessments for foundation and construction design. Write proposals for projects of up to 2 million Euros. Participate in mergers and acquisitions (M&A) environmental Due Diligence Assessments (largest project: 400 sites worldwide to have been completed within six weeks). Increase the URS Deutschland mining exposure. Work on mining damage issues and mining subsidence problems. Evaluate risks of possible ground failure and other mining damage resulting from historical mining activities.

03.99 - 08.01 Engineering geologist
Create proposals for geo-engineering projects. Establish and track project budgets. Conduct soils investigations for foundation designs, geotechnical studies and PHASE I environmental assessments. Recommend foundation designs and construction procedures for investigated properties. Carry out fieldwork and write reports in timely fashion; correspond with governmental and regulatory agencies; research geological parameters and historical information for litigation procedures.
Inspect construction activities including earthworks, concrete and asphalt placement, shear wall construction, welding results and fire proofing activities. Operate drilling equipment (truck mounted CME55, cat-head A-frame and portable diamond drill) for soil and rock testing (diamond drilling and hollow/solid stem augering). Conduct split spoon sampling and penetrometer testing.
Supervise and conduct materials laboratory activities as concrete and asphalt testing, soil parameter determinations and nuclear density testing. Perform nuclear densometer field tests.

09.98 - 01.99 Contract geologist
The work location was the Greens Creek Mine in Alaska. A new portion of the ore body was to be explored by an intensified temporary underground drilling program. Work activities included logging of NQ core, MAXIBOR surveying of diamond drill holes, creation of X-sections based on logging observations, and database compilation for INGRESS and DATAMINE applications.

07.98 - 08.98 Consulting geologist
Duties consisted of an evaluation of a property in respect to possible diamond occurrences. Soil and stream samples were collected and analyzed for Diamond indicator minerals. Clay, likely derived from a kimberlitic source, yielded a number of chromites (high magnesium and chromium) known to be stable under diamond forming conditions. Potential exploration targets were generated and a follow-up program was outlined. The first diamond ever found in Alaska was collected on this property as reported on July 8, 2002.

08.96 - 04.98 Project exploration geologist
1997 Project geologist for exploration programs targeting base and precious metals on previously established mid stage projects (trench sampling and mapping) in eastern Alaska (Veta prospects in the Yukon-Tanana Upland) and in the copper belt of the Brooks Range (Wiseman). Additional early stage projects were initiated and consisted of soil grid sampling and geo traversing in Central Alaska (Tanana). Geologic settings of the exploration targets included massive sulfides, skarns and fault related mineralization.

1996 As the project geologist, I was responsible for the legal and geologic evaluation of potential claim staking targets in western Alaska (near Flat). Of about 20 investigated sites more than half were staked with a total claim surface of about 50 square miles. The geologic setting was mostly hornfelsed sediments in contact with igneous rocks of generally granitic composition. My duties included soil sampling, stream sediment sampling, and geologic traversing with the collection of geochemical samples and hand specimens.
The staking crew (staking targets subsequent to my prior field investigation), consisted of up to 12 claim stakers and one geologist. The area covered was about a third of a 1:250,000 Quadrangle. An additional staking phase restarted in the winter. This effort connected two previously staked larger claim blocks adjacent to Placer Domes Donlin Creek property.

04.95 - 06.96 Department head/senior geologist
Duties consisted of acquisition, project management and coordination of hazard evaluation programs in connection with soil contamination remediation activities. Projects were located predominantly on industrial or municipal properties, to a lesser extent on military real estate. Projects were equivalent to the US Phase I, II and III terminology. Larger clients were Esso and Shell.
After 09.95 Responsibilities increased to maintaining the profitability of the cost center (office) and included accounting, budgeting and bidding as well as personnel and equipment planning. Supervised three project geologists and one field crew.

08.92 - 03.95 Engineering/Environmental Geologist

08.92 - 09.94 Supervisor of the department of geology, material science and damage analysis (GMD). Planning and conductiong of all phases of hazardous indoor materials handling.
09.94 - 03.95 In addition to activities mentioned above, duties consisted of supervising the geological laboratory (XRD, SEM), and acting as a supervising consultant in a soil exchange program. (Budget of about $6 Million).

10.88 - 02.92
05.91 - 02.92 Senior geologist of the extended exploration drilling program and the development drilling program (total of 25,000'/ month) Planning of the drill program, its holes, staffing, financing, permitting, and environmental impact. Responsible for timely realization of the drilling program and for professional interpretation of the drill data. Supervisor of six geologists, three geo-technicians, two Greens Creek drill crews and five sub-contractor drill crews.

10.90 - 04.91 Geologist of the drilling program (3300'/ month) Extensive core logging and development of X-sections of the ore body for mine planning.

10.88 - 09.90 Grade control geologist/Mining geologist responsible for the quality control in a strongly deformed Massive Sulfide Deposit. Steering of the production face to warrant the highest ore grade. Underground sampling and mapping of the ore body. On-site evaluation of production drifts. Photographing of faces sampled. Entering face data into AutoCAD and digitizing photographic information. Working closely with the mining department and the laboratory. Scheduling the sequence of face visits with shifters.

06.88 - 10.88 Exploration geologist
Regional Juneau Gold Belt reconnaissance study in southeast Alaska with special emphasis on "gold mineralization in epithermal vein deposits". Collection of soil samples, steam sediments, pan concentrates as well as ore and bedrock samples of abandoned mines in the area.

08.82 - 05.84 Research assistant with the Mineral Industry Research Laboratory's (MIRL) Interior Project

Fieldwork consisted of reconnaissance exploration of the entire Circle Mining District. The region comprises an area of 600 square miles. Investigation methods included general mapping with advanced rock unit descriptions, stream sediment, rock and soil sampling. Specific emphasis was given to structural parameters in an attempt to understand the tectonic history of the district. Laboratory work included the pulping of rock samples for chemical analysis and the preparation of thin and polish sections. Investigate prepared specimens in reference to metamorphic mineral assemblages and associated metals. The study furthermore included the utilization of Atomic Absorption Spectrometry (AAS), and fluid inclusion research on quartz veins.

03.81 - 07.82 Mining engineer (only during semester breaks)

Scientific research in the department of rock mechanics/road support. Statistical evaluation of convergence properties in production drifts of the Ruhr area. Technical consultant for mining companies in the Ruhr area concerning drift support issues.

10.77 - 11.80 Underground coal miner (only during semester breaks)
Total of an additional ten months in drift development.

11.76 - 09.77 Underground coal miner
Training department: six months
Drift development: five months.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1117)

Go to Search Parameters...

Brief Description

6 years in exploration of Industrial Minerals

MSHA Instructor,Exp papers in KY,IL IN,Boss papers in IL

Optimization / Resource Planning / Cost Control / Quality Assurance & Control / Compliance Performance Management / Turnaround / Safety / MSHA / Reclamation / International

I have been working in Africa for the last 6 years on managerial level in the security industry. I have the ability and experience to work in a general management position.

Mining Engineer, 30 yrs+ experience in Mining Management, (Coal, Hard Rock, Copper, Nickel)

M. Sc. in Geology from University of Calcutta (2006) and working in Gemcom Software (India) Pvt. Ltd. as eng.tech. support. Previously worked as a Geologist(Consultant) for Electrosteel Castings Ltd. During my tenure there I was responsible for Reconnaissance Survey for limestone and iron.

Engineer in metallurgy and production planning, with a valuable experience as chief engineer at Luilu Hydrometallurgical Plant (Gecamines), coupled with a strong background in computing, completing a project on ‘’Heap Leaching’’ at Liege University-Belgium

Geology & Mining Engineering Degrees; Underground and Surface Experience; Professional Geologist; Qualified Person after NI 43-101; Vulcan, Minesight, Gemcom Experience

Smelter expert - ISA smelter; waste Heat Recovery Boiler (WHRB), DM Plant, Electric Arc Furnace, Rotary Holding Furnace (RHF), Converters, Anode furnace, casting wheel and Sulfuric Acid plant.

Drilling Supervisor / Company Man CBM

Mineral Exploration, Administration and Management.

19 years process background in varied complex plants. Success gained in expatriate, residential and remote work environments. Utilised strong leadership ideals and practices to promote and empower subordinates and effected communication to all levels of management.

Tertiary qualification in Mineral Processing and Extractive Metallurgy, Good understanding in Met accounting, Good troubleshooting, strong analytical and conceptual thinking skills, Initiative, Team player and hands on the job training, Strong commitment to Training, Safety and the Environment

Free! I am an Engineering Geologist with 12 years post graduate experience in geotechnical consulting, construction supervision and mining operations. HAve post graduate qualifications in Engineering Geology (M.Sc) and am currently working as Geotechnical Superintendent at a world class mining operation.

experienced underground miner, lead miner, locomotive operator

Mine superintendent. Broad management and supervisory, engineering, production, mine startup, contracting, and cross-cultural experience in the underground environment. Mine sup't. Ten-plus years experience in backfill, shotcrete. Extensive xxperience in Latin America and Kosovo.

Equip Operator or Truck Driver /Over 15 years experience operating equipment in mining and construction/Trained in mine rescue procedures thru Ministry of Energy & Mines/ Accident free record for equip operations/ adapt quickly in adverse conditions/ work safely & productively

Over 23 years of rich experience in Technical Training, Erection & Commissioning, Production Planning and control,Safety,Environment,Health, and Quality in the fertilizer industry and Petrochemical industry seek suitable new assignments in Training and Development in Fertiliser,Petroleum,Petroche

Jumbo operator/Bolter Operator/Long Hole Drill Operator

Dragline Operator with 23+ years in the Bowen Basin

Jounyman Heavy Equipment Mechanic

14 years experience combined as a mill operator and mill supervisor

I have a National Higher Diploma in Extraction Metallurgy and currently studying towards a BSc Hons in Metallurgy at the University of Pretoria. My current tasks involve plant optimisation, risk assessments, health, safety and quality, budgetting, compilation and reviewing of work instructions.

Geological exploration works including mapping, bulk sampling, drill hole planning, logging and sampling during drilling.

I have 17 years of working experience on road construction and mining both hard rock and alluvial

To work for a great company as a driller or an advisor/trainer in the mining field or similar:(Exploration or other). My experience with and knowledge of drill bits may be of significant value to your company if many of your drill bits fail prematurely from broken or missing carbides.

underground driller operater

Geological Work - Prospecting, Exploratory mining pit, Estimation of Reserve, Sampling

I did Master's of Geology from Banaras Hindu University with 85.4% in June, 2007. Presently working as Geologist with Australian based company called India Resources ltd. (E&P), India. Here I am doing Mine Planning and Design , Ore body Modelling of Surda Mine .

I am a successful experienced large pulp and paper industry production supervisor with extensive knowledge working in a high paced, no errors environment. I believe my experience would transfer over well contributing to be proactive in company and personal growth.

Geological modelling, Vulcan expert user, JORC reporting Project management Quality control, reconciliation RC/diamond/environ drilling, remote exploration Tenement applications Contract/tender documents, capital justifications Traditional Owner liaison Training indigenous people (military)

eep all plant logs current, order supplies, and maintain and repair all working parts of the crusher, I maintain contact with main headquarters, and I am responsible for all aspects of tower operations and employees under my direct supervision.

Geologist at well site oredo 10 and 11 (Drilling rig)

mining engineer with hands on supervisory experience in mining development and production. He has worked internationally and is currently a mine planning engineer at Rosebery Mine, Tasmania. 34, married and has two children of 2 years and 6 months old. Fluent in Russian and English.

Accumulated almost 10 years working experience in Apo Cement Corporation, Cemex, Philippines. Directly involves in operation, inspection, maintenance and commissioning of the following Krupp Polysius AG manufactured equipment: 2 units 170 tons/hour cement grinding tube mill, 2 unit 300 tons/hour VRM

Experienced Plant Manager: Was born into the Aggregate Business and have worked for more than 20 years in a large variety of positions within the aggregate industry with a record of successful cost reduction and increased production in operations.

Seasoned mining operations manager that likes South America and understands the culture and the people and prides himself as a team player and able to get the job done.

A confident organised individual who is methodical in his approach to completing tasks, Can either work as a self – reliant individual or as part of a team.

I have spent 23 years in the extractive and minerals processing industries.

Supervisor - SAFE Underground Mining/Training - Production/Development and Construction. Atlas-Copco, Boart-Longyear, Wagner, Caterpillar, etc. 20+ years in Underground Gold, Silver, Lead and Zinc.

Melbourne, Australia Logistics Professional Have worked in many countries around the globe Extensive global knowledge of general freight movement, heavy lift and transportation requirements. Heavy shipping & barging, including barge landings.

Diamond Drilling Foreman(FSU)

27 yrs mining experience, 20 underground, 7 open pit experience in all phases of underground mining. operated haul pak and blast hole drills and front end loaders in pits.

Resume

As a fully qualified Mining Engineer currently employed, i am looking to forward my career in all aspects of mining operations including project finance and costing.

6 years undergound experience doing all jobs from moving supplies to drilling and blasting. Most of my experience is bolting with jackleg and stoper as I have been doing it for 5 years.

I had completed my graduation in Mining Engineering from University of Engineering & Technology Lahore (Pakistan) in December 1981. I started my career as Assistant Manager (Mining) in June, 1982 when my services were hired by State Cement Corporation of Pakistan.

OBJECTIVE To secure a position within a growing organization in which my talents, attributes and experience could be utilized to their maximum potential.

PROFESSIONAL RESUME

Indonesian Mining Engineer with Operations Experience Surpac and Vulcan

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out