Resume - Project Management / Inspection / Procurement / Quality Assurance

Misco Jobs

Resume #52004

CONTACT INFORMATION:
View contact information...

Education
MS Mining Engineering - Mackay School of Mines, University of Nevada, Reno 1988
BS Geology - Guilford College, Greensboro, NC 1979

Skills
Project Management / Inspection / Procurement / Quality Assurance
For: Light Rail, Heavy Commuter & Freight Rail / Heavy Civil / Tunnels, Mines, Plants.

Experience
Resident Engineer/Inspector - Rail Technology, Inc., Sacramento CA - 2000 to Present. Design Manager for heavy commuter San Jose to Gilroy rail expansion project. Project Manager for rail and special trackwork procurement contracts. Served as Resident Track Inspector for construction of ballasted railroad track, grade crossings, special trackwork, direct fixation track on aerial structures and in tunnels. Routinely handle project schedules, contractor's submittals & RFI's.

Project Manager - The Bartley Corporation, Silver Spring, Maryland - 1998 to 2000. Managed concrete construction projects. Implemented the safety program, estimated jobs and developed proposals. Provided hands-on job supervision.

Resident Engineer - Rail Technology, Inc., Sacramento, CA – 1997 to 1998. Project Inspection, Developed Safety Certification and Quality Assurance Programs.

Quality Control & Heading Engineer - Kajima Kiska, JV, Washington DC. 1996 to 1997. WMATA Green Line tunnel project in Washington D.C. Inspected concrete, monitored ground control grouting. Supervised line/grade control in shield a driven, concrete segment lined tunnel in difficult ground.

Field Engineer - Tutor Saliba Perini - San Francisco, CA 1993 to 1996
Staff engineer on the MUNI Metro Turnback Project for the SF MUNI subway. Two 18-foot-diameter tunnels were driven by a soft ground shield under compressed air using bolted steel liner plates. Produced plans and implemented extensive traffic detours in a downtown setting. Field supervision of labor and sub-contractors performing line/grade control, installing storm water pumping system, remedial bolting of the underlying BART tube steel liner plates, chemical grouting and jet grouting, ground settlement instrumentation.

Field Engineer – Stacy & Witbeck/Dillingham - San Francisco, CA - 1992 to 1993. SF MUNI South Embarcadero Rail Extension Project. Supervised track construction.

Mining & Tunneling Project Engineer
Mine Development & Engineering Corp. - 1989 to 1992. Served various contracts:
Morrison Knudsen/American Girl JV - Yuma, AZ – Supervised construction of two longhole drill & blast ore transfer winzes;
The Irvine Company, Newport Beach, CA – Served design team and provided supervision for a bolted steel liner plate tunnel under the Pacific Coast Highway in difficult ground;
Riverside County Flood Control and Water Conservation District – Served design team and supervised construction of a steel plate/ CIP concrete lined water tunnel under the Rt. 91 freeway;
Magma Gold, Ltd., Tucson AZ. - performed Mine planning for the McCabe underground gold mine near Prescott, AZ;
Valley Engineers, Fresno, CA – Supervised installation of drilled anchor tie-backs for a 36" diameter hydroelectric inlet pipeline on a remote section of the North Fork Yuba River, CA;
US Geological Survey, Carson City, NV – Supervised horizontal drilling from a shallow shaft in desert alluvium for placement of instrumentation to monitor migration of radioactive isotopes from US Ecology's hazardous waste facility near Beatty, NV.
Metropolitan Water District of Southern California and San Francisco Water Department.
Served as the CAL-OSHA Safety Representative supervising gas testers for construction and rehab projects in tunnels classified gassy and potentially gassy.

Mining Engineer - Homestake Mining Company - Lead, SD 1988 -1990
Mine Planning Engineer in the underground & open cut divisions and in mill operations and maintenance.

Underground Miner and Mine Geologist - Western Mine Development, Kingston, NV. 1983 – 1988. While enrolled in the Mining Engineering Program at Mackay School of Mines, Reno, NV. Served as miner, shifter, ore control supervisor for underground projects in NV and AZ.

Exploration Geologist - General Mineral Development, Reno, NV. 1981 - 1983. Supervised surface drill rigs and underground sampling for developing gold properties near Eureka, NV. Conducted surface sampling and mapping of gold prospect properties in Nevada.

Engineering Geologist - Cooper & Clark Consulting Engineers, Gillette WY. 1979 - 1981. Supervised drill rig conducting soil borings for railroad bed upgrade, construction and coal mine projects.

Certifications and Affiliations:
Professional Mining Engineer #010628, State of Nevada 1994
Member AIME-Society of Mining Engineers, Past Chairman of San Francisco Chapter.
CAL OSHA Safety Rep. #S51 96 / CAL OSHA Gas Tester #G123 96
MSHA 40 HR Safety Training Underground Mining
MSHA Instructor, Nevada Division of Mine Inspection
CAL OSHA Blasters License #7364 General Underground
MSHA Mine and Tunnel Rescue Training
BART Contractor Safety Certification

Supplemental Statement of Experience - Recent Rail Projects
William D. Baker

August 2005 - August 2006 C111 – Rail Rehabilitation at 1st & San Carlos St. $1.9M
Track Inspector on furnish / install contract for 115RE special trackwork embedded in San Jose city streets. Reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at Nortrak's manufacturing facility in Seattle, WA.

October 2001 – June 2005 C326 - Civil I SJ Diridon Station to Winchester $35.5M
Track inspector for installation of owner furnished rail and special trackwork for open LRT 115RE and Freight (second hand 133RE) track, paneled road crossings and a ballasted track bridge structure.

April 2002 – September 2003 C325 – Civil II Woz Way to SJ Diridon Station $17.7M
Track inspector for installation of owner furnished rail, special trackwork and DFF for open LRT track, paneled road crossings and a tunnel structure.

April 2001 – November 2003 May 2004 C225 – Capitol LRT Civil, Track &
Landscaping $48.1M
Resident Track Inspector for installation of owner furnished rail and special trackwork for open LRT track and paneled road crossings. Reviewed shop drawings and QA submittals, conducted field inspection and directed track inspectors.

January 2001 – May 2003 June 2004 C515 – Civil, Track and Landscaping (I-880 to
Hostetter) $22.9 M
Resident Track Inspector for installation of owner furnished rail, DFF and special trackwork for open LRT track, paneled road crossings and an aerial structure. Reviewed shop drawings and QA submittals, conducted field inspection and directed track inspectors.

April 2001 – December 2002 A110 – Concrete Ties $2.1M
Resident Inspector on procurement contract. Purchased ties for LRT 115RE rail to be used on various construction contracts. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audit at CXT / LB Foster's manufacturing facility in Spokane, WA. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

March 2001 – September 2003 A100 Running Rail $2.0M
Resident Inspector on procurement contract for new 115RE and second hand 133RE running rail and OTM to be used on various LRT and freight railroad construction projects. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audits at LB Foster's manufacturing facility in Seattle, WA. Inspected second hand 133RE rail at LB Foster's lay down facility in Bliss, Id. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

March 2001 – November 2002 A105 – Special Trackwork $2.2M
Resident Inspector on procurement contract for special trackwork, wood ties, concrete crossing panels and OTM to be used on various LRT and freight railroad construction projects. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audits at LB Foster's and CXT/LBF's manufacturing facilities in Seattle and Spokane, WA. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

June 2000 – May 2002 A324 – Special Trackwork for Woz Way/San Carlos $485K
Resident inspector on procurement contract for special trackwork. Purchased rail, DFF and OTM for an embedded LRT 115RE half-grand union. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at ABC Naco's (now Nortrak's) manufacturing facility in Chicago, IL.

November 2000 – April 2001 A322 – Special Trackwork SJ Diridon Tunnels $127K
Resident Inspector on procurement contract for special trackwork. Purchased rail and OTM for 136RE freight/commuter rail turnouts. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at ABC Naco's (now Nortrak's) manufacturing facility in Pueblo, CO.

January 2000 – July 2000 C510 – Civil, Track & Landscaping (Zanker to I-880) $7.9M
Track Inspector for installation of owner furnished rail and special trackwork for open and embedded LRT track.

January 2000 – April 2000 A822 – Special Trackwork (Zanker to I-880) $200K
Resident Inspector on contract to procure special trackwork – LRT 115RE curved crossover – from Progress Rail Services. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at Progress Rail Services manufacturing facility in Sherman, TX.

March 1998 A810 – Running Rail $1.8M
Track inspector for procurement of 115RE rail and special trackwork. Inspected unloading and stacking. Conducted shop inspection and QA audit at Progress Rail Services DeCoursey manufacturing facility in Covington, KY.

March 1998 A840 – Concrete Ties $1.3M
Track inspector on procurement contract. Inspected unloading and stacking of Rocla ties made for various LRT projects.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 1116)

Go to Search Parameters...

Brief Description

Construction Management/Estimating/Supt/PM

Chief Enineer, Limited, Oceans, Unlimited HP

Shift Supervisor Shift Foreman

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

My areas of expertise are production, short-term planning and project management. I am a troubleshooter and leader that use influence to get things done

Engineer / Management / Accounting / IS

Driver, teacher, maintenance computer, air conditioning and electrician

Project management, corporate management, oil & gas facilities, pipelines, power generation, mines

Graduate degree in mineral processing engineering. Having more than 6 years of work experience in china clay and beach sand mineral industry.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Quality Control professional

Rotating & reciprocating equipment technician

Seeking challenging rewarding career opportunity with a progressive innovative company utilizing leadership and management skills

I am a recent graduate from the Haileybury School of Mines in the Mining Engineering Technician Program. I graduated with honors in August 2001.

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Marine Operations, Shipping, Logistics, Port Management, Ship Agency, Representation in Ukraine at port of Berdyansk

I am a qualified and experienced Medic or Paramedic and have vast HSE/Safety/OHS/QHSE experience and qualifications. I am also a qualified rescue technician and am very well versed in emergency co-ordinating.

Oil & Gas Exploration Project Manager - Spring Creek, Nevada resident - Forest Service, BLM , Tribal, State & Federal liason experience

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Seeking Assignments with organisation of high repute in Mining industry. To be an effective member of a group of repute where I can share more knowledge and get an opportunity to develop myself.

25 years experience in Oil Field, Africa, Middle-East, and Asia

A Metallurgical Engineer with over 2 years of experience in Process management, Smelter Operations, Production planning, Quality Assurance. At present, associated with Sterlite Industries India Ltd, serving as Process Engineer- Primary Smelter with ISA smelt Technology. Expertise in handling the com

Purchaing, Procurment, Supply Chain Management, Materails, Inventory

Mechanical/Manufacturing Engineering, Project/Program Management, Supply Chain Management

Load overburden, split coal, push in a shop

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Instrumentation and Control Engineer

I am graduated with M.Sc.Applied Geology with Specialization in Geophysics. I have completed my Internship with Oil and Gas development company (O.G.D.C) in geophysical data interpretation of oil well. I have also worked on different softwares like Golden software (surfer 8), Didger, QuickSyn.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

Procurement & Supply Chain Management

Seeking Chemist, Laboratory, or Quality Control Position

Presently I am working with a Multinational FMCG Company (Dairy Division)

Experienced operating Komatsu 830E and 630 dump trucks. Also CAT 777D dump trucks and water carts. Experienced blast crew. Many licences and quals. Experienced trainer and assessor

I have over 20 years in the underground profession and I am looking for some company that can utilize my experience.

Sr.Document Controller

Graduate Mining Engineer, Colorado School of Mines (First in Class 1998), 4 years military experience, US Army Corps of Engineers Alaska District. Looking for a developmental position within a growing mining company. Will relocate anywhere.

PE in Mining, Environmental & Civil Engineering with 26+ years experience in surface coal mining management, engineering & environmental. I've held positions up to and including Vice-President of Operations. Well experienced in open pit dragline & truck/shovel operations. Well organized.

Seeking employment in mining Industry/Consultency as Mine Planning /Scheduling Engineer. Key Skills: Exposure to mechanised Underground and Opencast mining technologies. Experience in Computerised Mine Planning and Geological modelling using Minex software and Autodesk

Managing, organising and participating in geological field studies, drilling and geological testing programAnalysing geological, geochemical and geophysical survey data, well logs and other test results, maps, notes and cross sections, core samples, drill cuttings and rock samples

I am a safe and productive Miner with ten years of increasing experience

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Corporate Executive in Information Technology with extensive international experience in Systems/Product Architecture (Analysis & Design), Program/Project Management, Business Continuity Disaster/Recovery Planning, Technical Service Delivery & Support, Technical/Operations Management

Seeking Position in Oil Industry.

Have exstensive experience, training, and knowledge as an underground coal mine Maintenance Foreman/Electrician in longwall and continuous miner sections. Have excellent electrical, mechanical and hydraulic skills along with welding,cutting, and fabrication skills.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out